Article ID: 147164
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q147164
SYMPTOMS
When you install a NEC CDR-C251 MultiSpin 4-disc CD-ROM changer on a
computer running Windows 95, your computer may stop responding (hang) when
you start Windows 95, or the CD-ROM changer may continuously cycle through
the discs in the changer.
CAUSE
This behavior can occur if the Auto Insert Notification option is enabled
in Windows 95 and one or more of the CD-ROMs in the changer contains an
Autorun.inf file. The Autorun.inf file causes Windows 95 to try to start a
program on the CD-ROM.
RESOLUTION
To work around this behavior, disable the Auto Insert Notification feature.
To do so, follow these steps:
- In Control Panel, double-click System.
- On the Device Manager tab, double-click the CD-ROM branch, and then
double-click NEC CDR-C251 CD-ROM.
- On the Settings tab, click the Auto Insert Notification check box to
clear it.
- Click OK or Close until you return to Control Panel. When you are
prompted to restart your computer, click Yes.
NOTE: All four of the CD-ROM drives associated with the NEC CDR-C251
CD-ROM changer should be listed in Device Manager. The above procedure
should be repeated for each of the four CD-ROM drives.
Additional query words: c251 jukebox
Keywords: kbdiskmemory KB147164