XADM: Distributing Gateway Addresses to Exchange Server

MORE INFORMATION

1. Install the Microsoft Mail for PC Networks Gateway Access Component on the Microsoft Exchange Server's shadow postoffice, following the instructions provided with the Gateway Access Component documentation.
   
   NOTE: You can access the Microsoft Exchange Server's shadow postoffice by connecting to the MAILDAT$ share on the Microsoft Exchange Server:

   net use * \\exserver\maildat$

2. Configure any necessary options on the gateway postoffice to ensure that gateway messages are routed properly to the Microsoft Exchange Server's shadow postoffice.
3. If the Microsoft Exchange Server acts as a dirsync requestor, perform the following steps using the Microsoft Exchange Administrator program; otherwise, proceed with Step 4:
   1. From the Container window, select the appropriate site's Configuration, Connections container
   2. Double-click the Exchange DirSync Requestor connector.
   3. From the General Property page, ensure that the appropriate gateway types to be propagated are selected.
   This will allow the Microsoft Exchange Server's Shadow Postoffice to accept addresses of this type.
   
   
4. Create a file containing the gateway addresses by using IMPORT.EXE to extract the addresses from the Microsoft PC Mail postoffice. For example:

   import admin -ppassword -dm -gMHS -fextract.txt -x
   

   This example will create a text file called EXTRACT.TXT that contains all of the MHS gateway addresses on the postoffice on drive M.
   
   
5. Re-import the addresses using the import command with the -e parameter:

   import admin -ppassword -dm -fextract.txt -e
   

   This example will import all of the addresses in the file called EXTRACT.TXT into the directory synchronization (dirsync) process on the postoffice on drive M.
   
   NOTE: The use of the IMPORT.EXE utility with the -E option will populate the REQTRANS.GLB on the postoffice with all of the gateway addresses listed in the import-format text file. The dirsync server must have the gateway access component installed for these addresses to be accepted and propagated.
   
   
6. The dirsync process will now distribute these addresses on its next cycle.