Network Printing Options with the Tektronix Phaser

MORE INFORMATION

The following Tektronix Color Printer drivers are shipped with Windows NT 3.51:

Tektronix Phaser 140
Tektronix Phaser 200e
Tektronix Phaser 200I
Tektronix Phaser 220e
Tektronix Phaser 220I
Tektronix Phaser 300I
Tektronix Phaser 340
Tektronix Phaser 440
Tektronix Phaser 480
Tektronix Phaser 540
Tektronix Phaser II PXi
Tektronix Phaser II Pxe
Tektronix Phaser II PX
Tektronix Phaser III Pxi
Tektronix Phaser IISD
Tektronix Phaser IISDX
Tektronix Phaser Pxi
Tektronix Phaser PX

CONNECTION OPTIONS

Depending on the model, you should have the following Network options:

Parallel
Serial
*TCP/IP Printing (LPD)
Apple Talk

*NOTE: Not all Tektronix Phaser devices have TCP/IP enabled. It may be necessary to contact Tektronix for Authorization codes to enable features within the device.

TCP/IP

To install this option, follow the steps below:

Windows NT 3.5 and 3.51 includes network software called "TCP/IP print services (lpr print services)." Refer to the Windows NT manual for instructions on how to install this network software. After you have installed TCP/IP print services, do the following:

1. Open Print Manager, create a new printer, and select the appropriate printer driver. If there is no driver for your printer, follow the steps in the previous section, "Installing a Windows NT PostScript Driver", to install the proper printer driver.
2. Select 'Print to Other' for the Device Port. For Other Device select 'lpr.'
3. For name or address of host providing lpd, enter your printer's IP address (or Host name if known to the network).
4. For the name of the printer on that machine, type in one of the following:
   
   AUTO: Autoselect, Postscript, HPGL or ASCII Text
   PS: Postscript Only
   PSTEXT: ASCII text only
   HPGL: HPGL files only
   - (If you are unsure, choose AUTO)
   
   Click OK to complete the installation.

AppleTalk

Windows NT 3.5 and 3.51 includes network software called "Services for Macintosh." Refer to the Windows NT manual for instructions on how to install this network software. After you have installed it, perform the following steps:

1. Open Print Manager, create a new printer, and select the appropriate printer driver.
2. Select 'Print to Other' for the Device Port. For Other Device select 'AppleTalk Printing Devices.'
3. Windows NT will then search the network for zones or Available AppleTalk Printing Devices.
4. Select the appropriate zone.
5. Windows NT will search the network again for Available AppleTalk Printing Devices within that zone. (This is similar to Chooser on the Mac.)
6. Select your Tektronix printer.
7. At the prompt "Do you want to capture this AppleTalk Printing Device?", if you click Yes, you will hide the printer from regular Mac users, forcing them to use Windows NT Server as a spooler, as long as NT Server allows sharing of this printer.

For Additional information refer to the following:

Tektronix     (800) 835-6100  Technical support
Tektronix     (503) 627-7111  Main number
HAL (FaxBack) (503) 682-7450  (direct)or 1-800-835-6100

              Request Document #9506
				

The products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.