Knowledge Base

SMC Ultra 8216 Is Supported by Selecting SMC EtherEZ (8416)

Article ID: 148472

Article Last Modified on 11/1/2006

APPLIES TO

This article was previously published under Q148472

SUMMARY

The SMC EtherCard Elite Ultra (8216) is not an option to choose when you install the SMC16 network card driver that is available from the DRVLIB subdirectory. The HCL clearly identifies that the Driver Library on the compact disc is a source for this driver.

If you select the "SMC EtherEZ Adapter (8416)" option, the driver installs and works correctly.

MORE INFORMATION

When you try to use the SMC driver located in the DRVLIB\NETCARD\X86\SMC16 directory on the NT 3.51 Server or Workstation disc, you are presented with the following options: 

   SMC 8003E/A MCA EtherCard Plus
   SMC 8003W/A MCA EtherCard Plus
   SMC 8013EP/A MCA EtherCard Plus Elite
   SMC 8013WP/A MCA EtherCard Plus Elite
   SMC EtherEZ Adapter (8416)


If you examine the OEMSETUP.INF file in the DRVLIB\NETCARD\X86\SMC16 directory, the comment shows that this driver is for the SMC Ultra 8216 network adapter. However, the Options section in the INF file does not define an entry for the 8216 as seen by the available options listed above.

After choosing the SMC EtherEZ Adapter (8416) option, you are prompted for the port address the adapter is using. Once this is entered, the driver will install and function correctly for the SMC EtherCard Elite Ultra (8216).

Keywords: KB148472


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.