SNA EIS Guide: Open(SSCP)Error 0x1009, 0x100B Not Documented
Article ID: 148736
Article Last Modified on 12/8/2003
APPLIES TO
- Microsoft SNA Server 2.0, when used with:
- Microsoft SNA Server 2.1, when used with:
- Microsoft SNA Server 3.0, when used with:
- Microsoft SNA Server 2.11 Service Pack 1, when used with:
This article was previously published under Q148736
SYMPTOMS
Section 5.2.1 of the SNA Server 3270 Emulator Interface Specification (EIS)
lists Open(SSCP) errors that SNA Server may return to an emulator when it
opens a 3270 session. However, the following Error Code 1 errors are
not listed in this section:
X'1009': The local link service for the connection is active but the
connection itself is not active. The 3270 emulator should report to the
user that the connection is not active, or try reposting a new
Open(SSCP) request.
X'100B': The connection is in the process of activating as the result of
another Open(SSCP) client request, manual administrator activation, or
automatic recovery from a previous connection failure. The 3270 emulator
should report to the user that the connection is activating, and try
reposting a new Open(SSCP) request.
CAUSE
These errors were inadvertently omitted from the SNA Server 3270 EIS
manual.
STATUS
Microsoft has confirmed this to be a problem in Microsoft SNA Server. A
future update to the SNA Server Emulator Interface Specification will
correct this problem.
Additional query words: prodsna 2.00 2.10 2.11 SP1
Keywords: KB148736