Attachmate Advanced Coax Adapter Fails w/Event 23 Qualifier 11
Article ID: 148996
Article Last Modified on 11/26/2003
APPLIES TO
- Microsoft SNA Server 2.0, when used with:
- Microsoft SNA Server 2.1, when used with:
- Microsoft SNA Server 3.0, when used with:
- Microsoft SNA Server 2.11 Service Pack 1, when used with:
This article was previously published under Q148996
SUMMARY
The Attachmate Advanced Coax Adapter may fail with Event 23, Qualifier 11
(DSR failure) if the hardware resources are not set to the following:
Base Address: CE000
I/O Port address: 2D0
IRQ: 2
These settings must also match on the card using jumper settings. See the
Attachmate Coax adapter documentation for details on how to change these
settings.
The SNA Server IBM DFT driver must be selected in SNA Server Setup if you
use the Attachmate Advanced Coax Adapter, which emulates an IBM 3278/3279
Emulation adapter.
KBCategory: kb3rdparty
KBSubcategory: sna3rdparty
Additional query words: 2.00 2.10 2.11 2.11.sp1 service pack 1
Keywords: kbinfo KB148996