Knowledge Base

TN3287 Support Added to the TN3270 Server

Article ID: 149303

Article Last Modified on 11/19/2003

APPLIES TO

This article was previously published under Q149303

SYMPTOMS

Support for TN3287 clients has been added to Microsoft TN3270 Server.

STATUS

Support for TN3287 has been added to the TN3270 Server as a hotfix to SNA Server 2.11 Service Pack 1. This update is available on request from Microsoft.

MORE INFORMATION

TN3287 provides a different protocol for accessing printer clients, but there are no changes to the TN3270 configuration. That is, if you have a TN3270 LU configured to support printer clients it will support both TN3270E and TN3287 clients. So, when you configure the TN3270 Server, no special configuration is required for TN3287 clients

RFC 1646 contains the following text on TN3287:

The purpose of the TN3287 protocol is to provide a general IBM 3270 host printer communications facility. Its primary goal is to allow a method of connecting printer devices and printer-oriented processes to each other. This protocol will allow a TN3270 Client to process 3287 print data streams.

The TN3287 Client is a TN3270 client created specifically to print mainframe 3270 print data. The client emulates the IBM device type that it identifies itself to the TN3270 server as, in this case, an IBM 3287 model 1 type printer. The design of this printer protocol is aligned with the way printing occurs in the IBM host and how 3270 printers function. These printer extensions DO NOT support a 3270 printer client that cannot accept both types LU1 and LU3 printer streams.

Support for the TN3287 data stream requires that both sides:
  • Are able to exchange binary data.
  • Can establish the agreement between client and server on the terminal type that will be used.
  • Agree to use the TELNET IAC EOR as a delimiter for inbound and outbound TN3287 data streams
This implementation requires the options: TERMINAL-TYPE and BINARY be successfully negotiated between the Client and Server before processing of any print data streams. The LU type is determined by the bind from the mainframe application. The server, when bound, must remember LU 1 or LU 3 type. The server will automatically unbind the session upon receipt of a TELNET CLOSE command. The printer will be reported to VTAM as powered down until a new TELNET connection is established.

Additional query words: prodsna sp1

Keywords: kbbug kbfix kbnetwork KB149303


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.