Weitekp9 Video Driver Collides with Media Vision Sound Driver

SYMPTOMS

When you try to use the Media Vision Proaudio Spectrum 16 driver (Mvaudio.sys) in conjunction with any of these Diamond Viper video cards:

   Diamond Viper PCI
   Diamond Viper PRO PCI
   Diamond Viper PRO VLB
   Diamond Viper VLB
   Diamond Viper SE PCI
   Diamond Viper SE VLB
				

you may receive a combination of the following event messages (the messages received depends on which driver was loaded first):

   Event id: 22
   source: Weitekp9
   type: error

      Description: A conflict has been detected between two drivers which
      claimed two overlapping Io port regions. Driver weitekp9, with device
      <\Device\Video1.Translated>, claimed an IO port range with starting
      address in data address 0x28 and 0x2c, and length in data address
      0x30.

      0000: 000c0000 005e0003 00000000 c0040016
      0010: 00000000 00000000 00000000 00000000
      0020: 00000000 00000000 0000f000 00000000
      0030: 00000c04


   Eventid: 22
   source: Weitekp9
   type: error

      Description: A conflict has been detected between two drivers which
      claimed two overlapping Io port regions. Driver mvaudio, with device
      <\Device\PASWaveOut0.Translated>, claimed an IO port range with
      starting address in data address 0x28 and 0x2c, and length in data
      address 0x30.

      0000: 000c0000 005e0003 00000000 c0040016
      0010: 00000000 00000000 00000000 00000000
      0020: 00000000 00000000 0000f388 00000000
      0030: 00000004


   Event id: 22
   source: mvaudio
   type: error

      Description: The description for Event ID (22) in Source ( mvaudio )
      could not be found. It contains the following insertion string(s): ,
      weitekp9, \Device\Video0.Translated.
      
      0000: 000c0000 005c0003 00000000 c0040016
      0010: 00000000 00000000 00000000 00000000
      0020: 00000000 00000000 0000f000 00000000
      0030: 00001000


   Event id: 22
   source: mvaudio
   type: error

      Description: The description for Event ID (22) in Source ( mvaudio )
      could not be found. It contains the following insertion string(s): ,
      mvaudio, \Device\PASWaveOut0.Translated.
      
      0000: 000c0000 005c0003 00000000 c0040016
      0010: 00000000 00000000 00000000 00000000
      0020: 00000000 00000000 0000f388 00000000
      0030: 00000004


   Event id: 7000
   source: Service control manager
   type: error

      Description: The mvaudio service failed to start due to the following
      error: The parameter is incorrect.