Article ID: 151620
Article Last Modified on 10/27/2006
APPLIES TO
- Microsoft Systems Management Server 1.0 Standard Edition
- Microsoft Systems Management Server 1.1 Standard Edition
- Microsoft Systems Management Server 1.2 Standard Edition
This article was previously published under Q151620
SYMPTOMS
Clients scan hardware or software at every logon even though Every 1
Days is specified in the Inventory section of the Site Properties. If the
interval every two days is specified, the scan occurs daily. If the
interval specified is every three days, the scan occurs as expected.
CAUSE
The Sms.ini SoftwareScanInterval or HardwareScanInterval is set at a value
one greater than it should be.
The SoftwareScanInterval or HardwareScanInterval, when set at every one (1)
day, will be set to one (that is, always) in the Sms.ini, although it
should be set at two.
When set at two days, the SoftwareScanInterval or HardwareScanInterval will
be set at two (that is, daily) in the SMS.INI, although it should be set at
three.
When set at three days, the SoftwareScanInterval or HardwareScanInterval
will be set at three (interval), and scans every 3 days.
WORKAROUND
To work around this problem:
- To specify daily scans, type "Every 2 Days."
- To specify scans every three days or less frequently, type the interval
as you normally would.
NOTE: this problem precludes specifying an interval of two days.
STATUS
Microsoft has confirmed this to be a problem in Systems Management Server
versions 1.0, 1.1 and 1.2. We are researching this problem and will post
new information here in the Microsoft Knowledge Base as it becomes
available.
Additional query words: prodsms
Keywords: kbinventory kbnetwork kbsmsadmin KB151620