
 Location Management

 This menu allows new drive locations to be added or existing location
 name(s) to be deleted or changed.

 Location names must be 10 alphanumeric characters or less.
 
 The "location" of a drive is typically the default location.  If
 more than the default location is defined, parameters on commands such
 as tpreq(1) are required for operations at a location other than the default.

 Multiple locations may be used in circumstances such as a secure room
 which contains tape drives under control of one operator, while
 other, non-secure tape drives are defined elsewhere and are under
 the control of another operator.

 Care must be taken when defining multiple locations and communicating
 this fact to potential users of drives at the non-default location.
 Usually, one location is sufficient.

 Drives within any given robotic library are required to be at the
 same location.   
