Patch-ID# 100959-02
Keywords: CTE, SNC1.2, nc400
Synopsis: Sun Network Coprocessor snc 1.2 jumbo patch 
Date: May/28/93
 
SunOS release: 4.1.3
 
Unbundled Product: SNC 
 
Unbundled Release: 1.2 
 
Topic: SNC 1.2 release 
 
BugId's fixed with this patch:  1077307 1082456 1085635 1091436 1093534 1095031 1093247 1098571 1105969 1106100

Changes incorporated in this version: 

Architectures for which this patch is available: sparc
NOTE: sun4, sun4m

Patches which may conflict with this patch: 

Obsoleted by: 

   This patch will be obsoleted by the SNC 1.2 official CD release.

Files included with this patch: The entire SNC 1.2 CD image.

Problem Description: 

1077307 - SNC 1.0 software doesn't contain 4.1.2 lockfs support
1082456 - Galaxy with 6 - NC600 sometimes panics under load
1085635 - System panics when allocating new kernel memory
1091436 - panic inactive omni_nfsd
1093534 - With NC600, the system keeps failing with "panic: Data fault"
1095031 - snc 1.0 is not compatible with sunlink dni
1093247 - SNC 1.0 on sun4m causes NFS server not responding under 4.1.2
1098571 - Sun Network Coprocessor install munges kernel config files
1105969 - Cannot build a kernel for NC400 on a Sun4 system
1106100 - SNC 1.0's nfsstat reports kas error on 4.1.3m

INSTALL: 

Please read the "READMEFIRST" document FIRST before proceeding with the
following installation procedure.

Installing From The Patch
---------- ---- --- -----

1) You will need to create a directory on a file system with at least
   10MB free.  For the following instructions, the name of this directory
   is assumed to be SNC1.2.  You are free to use any name you choose, just
   substitute the directory name used in the commands that follow.

2) cd to the directory.

3) tar xvf /dev/rst0 [Use the appropriate tape device name]

4) Now you have loaded the SNC 1.2 CD image on your file system. 
   To install the product, run cdm as follows:

	# cdm
	 
	[Enter 1 - Select Application]
	[Enter 1 - Sun Network CoProcessor]
	[Enter 3 - Install Application]
				  
	Answer the remaining installation questions.  At the end you need
	to follow the directions given for booting the generated kernel.

        Please refer to "Sun Network CoProcessor, Release 1.2, Installation 
	Guide" for details installation instructions.

After the installation is complete, you may delete the directory.  Save
the Snc/_install directory if you want to de-install the SNC release in the
future.  The de-install_snc script is used to de-install the SNC software.
