1 INFO-VAX	Sun, 25 Dec 2005	Volume 2005 : Issue 717       Contents: Re: TCPIP5.4  patch 5 problem  Re: TCPIP5.4  patch 5 problem  Re: TCPIP5.4  patch 5 problem  Re: TCPIP5.4  patch 5 problem   F ----------------------------------------------------------------------    Date: 25 Dec 2005 10:10:08 +01006 From: eplan@langstoeger.at (Peter 'EPLAN' LANGSTOEGER)& Subject: Re: TCPIP5.4  patch 5 problem, Message-ID: <43ae7000$1@news.langstoeger.at>  N In article <ops2bfehjezgicya@hyrrokkin>, "Tom Linden" <tom@kednos.com> writes:W >On 24 Dec 2005 20:43:01 +0100, Peter 'EPLAN' LANGSTOEGER <peter@langstoeger.at> wrote: Q >> In article <ops2aq3xh3zgicya@hyrrokkin>, "Tom Linden" <tom@kednos.com> writes: ? >>> I have 5.4 running on 7.3, 7.3-1 and 7.3-2  and I installed ; >>> said patch to each of them, but 7.3 doesn't like it :-(  >>B >> RUsure ? OTOH I don't know if V5.4 is supported on V7.3 at all.	 >> [snip] B >I followed the directions in the ECO release notes which included >[snip] 	 >However,  >  >FREJA> ssh localhost D >%IMGACT-F-SYMVECMIS, shareable image's symbol vector table mismatchB >-IMGACT-F-FIXUPERR, error when TCPIP$SSH_SSH2 referenced DECC$SHR > : >Which certainly looks as if something didn't get updated.  D Yup. The opsys. You need to upgrade VMS (and perhaps DECC) for ECO5.G (TCPIP V5.5 requires V8.2[-1] and) TCPIP V5.4 requires V7.3-1 or V7.3-2   B To UNDO PATCH of the ECO5 you need at least V7.3-402 of PCSI (do aH PRODUCT SHOW UTILITY) and it must have been installed with the qualifier; /SAVE_RECOVERY_DATA (and this data must still be there ;-).   D If this is not possible, then PRODUCT INSTALL TCPIP and then PRODUCT? INSTALL TCPIP_ECO (the ECO4 of course) again. Note however that B TCPIP V5.4 (w/ or w/o ECOs) is not supported on OpenVMS Alpha V7.3" and does not exist for OpenVMS VAX   Sorry    --   Peter "EPLAN" LANGSTOEGER % Network and OpenVMS system specialist  E-mail  peter@langstoeger.atF A-1030 VIENNA  AUSTRIA              I'm not a pessimist, I'm a realist   ------------------------------  % Date: Sun, 25 Dec 2005 05:54:56 -0800 # From: "Tom Linden" <tom@kednos.com> & Subject: Re: TCPIP5.4  patch 5 problem( Message-ID: <ops2cd9upgzgicya@hyrrokkin>  : On 25 Dec 2005 10:10:08 +0100, Peter 'EPLAN' LANGSTOEGER   <eplan@langstoeger.at> wrote:   J > In article <ops2bfehjezgicya@hyrrokkin>, "Tom Linden" <tom@kednos.com>  	 > writes: = >> On 24 Dec 2005 20:43:01 +0100, Peter 'EPLAN' LANGSTOEGER     >> <peter@langstoeger.at> wrote:L >>> In article <ops2aq3xh3zgicya@hyrrokkin>, "Tom Linden" <tom@kednos.com>   >>> writes: @ >>>> I have 5.4 running on 7.3, 7.3-1 and 7.3-2  and I installed< >>>> said patch to each of them, but 7.3 doesn't like it :-( >>> C >>> RUsure ? OTOH I don't know if V5.4 is supported on V7.3 at all. 
 >>> [snip]D >> I followed the directions in the ECO release notes which included	 >> [snip]  >> However,  >> >> FREJA> ssh localhost F >> %IMGACT-F-SYMVECMIS, shareable image's symbol vector table mismatchD >> -IMGACT-F-FIXUPERR, error when TCPIP$SSH_SSH2 referenced DECC$SHR >>< >> Which certainly looks as if something didn't get updated. > F > Yup. The opsys. You need to upgrade VMS (and perhaps DECC) for ECO5.I > (TCPIP V5.5 requires V8.2[-1] and) TCPIP V5.4 requires V7.3-1 or V7.3-2 4 How about just installing later version of DECC$SHR? > D > To UNDO PATCH of the ECO5 you need at least V7.3-402 of PCSI (do aJ > PRODUCT SHOW UTILITY) and it must have been installed with the qualifier= > /SAVE_RECOVERY_DATA (and this data must still be there ;-).  > F > If this is not possible, then PRODUCT INSTALL TCPIP and then PRODUCTA > INSTALL TCPIP_ECO (the ECO4 of course) again. Note however that D > TCPIP V5.4 (w/ or w/o ECOs) is not supported on OpenVMS Alpha V7.3$ > and does not exist for OpenVMS VAX  I Thanks Peter,  I thought I had saved the recovery data but apparently not E so will have to reinstall.  I had to replace ssh%2_config.  Are those  compatible with ECO 4?   ------------------------------  % Date: Sun, 25 Dec 2005 06:49:32 -0800 # From: "Tom Linden" <tom@kednos.com> & Subject: Re: TCPIP5.4  patch 5 problem( Message-ID: <ops2cgsuiizgicya@hyrrokkin>  : On 25 Dec 2005 10:10:08 +0100, Peter 'EPLAN' LANGSTOEGER   <eplan@langstoeger.at> wrote:   J > In article <ops2bfehjezgicya@hyrrokkin>, "Tom Linden" <tom@kednos.com>  	 > writes: = >> On 24 Dec 2005 20:43:01 +0100, Peter 'EPLAN' LANGSTOEGER     >> <peter@langstoeger.at> wrote:L >>> In article <ops2aq3xh3zgicya@hyrrokkin>, "Tom Linden" <tom@kednos.com>   >>> writes: @ >>>> I have 5.4 running on 7.3, 7.3-1 and 7.3-2  and I installed< >>>> said patch to each of them, but 7.3 doesn't like it :-( >>> C >>> RUsure ? OTOH I don't know if V5.4 is supported on V7.3 at all. 
 >>> [snip]D >> I followed the directions in the ECO release notes which included	 >> [snip]  >> However,  >> >> FREJA> ssh localhost F >> %IMGACT-F-SYMVECMIS, shareable image's symbol vector table mismatchD >> -IMGACT-F-FIXUPERR, error when TCPIP$SSH_SSH2 referenced DECC$SHR >>< >> Which certainly looks as if something didn't get updated. > F > Yup. The opsys. You need to upgrade VMS (and perhaps DECC) for ECO5.I > (TCPIP V5.5 requires V8.2[-1] and) TCPIP V5.4 requires V7.3-1 or V7.3-2   ( I went back and reread the release notesa ftp://ftp.itrc.hp.com/openvms_patches/layered_products/alpha/DEC-AXPVMS-TCPIP_ECO-V0504-155-4.txt I and it certainly isn't made clear that it won't work under 7.3, in fact    there 0 are number of discussions of behaviout under 7.3  G Seem to me that it would be a trivial matter for the patch to produce    message K the it is not supported on the system ib which you are intending to install  > D > To UNDO PATCH of the ECO5 you need at least V7.3-402 of PCSI (do aJ > PRODUCT SHOW UTILITY) and it must have been installed with the qualifier= > /SAVE_RECOVERY_DATA (and this data must still be there ;-).  > F > If this is not possible, then PRODUCT INSTALL TCPIP and then PRODUCTA > INSTALL TCPIP_ECO (the ECO4 of course) again. Note however that D > TCPIP V5.4 (w/ or w/o ECOs) is not supported on OpenVMS Alpha V7.3$ > and does not exist for OpenVMS VAX >  > Sorry  >    ------------------------------  % Date: Sun, 25 Dec 2005 09:44:54 -0800 # From: "Tom Linden" <tom@kednos.com> & Subject: Re: TCPIP5.4  patch 5 problem( Message-ID: <ops2cow4emzgicya@hyrrokkin>  : On 25 Dec 2005 17:06:55 +0100, Peter 'EPLAN' LANGSTOEGER   <peter@langstoeger.at> wrote:   J > In article <ops2cd9upgzgicya@hyrrokkin>, "Tom Linden" <tom@kednos.com>  	 > writes: = >> On 25 Dec 2005 10:10:08 +0100, Peter 'EPLAN' LANGSTOEGER     >> <eplan@langstoeger.at> wrote:H >>> Yup. The opsys. You need to upgrade VMS (and perhaps DECC) for ECO5.K >>> (TCPIP V5.5 requires V8.2[-1] and) TCPIP V5.4 requires V7.3-1 or V7.3-2 7 >> How about just installing later version of DECC$SHR?  > # > Don't know. How about trying it ?  > J >> Thanks Peter,  I thought I had saved the recovery data but apparently   >> notH >> so will have to reinstall.  I had to replace ssh%2_config.  Are those >> compatible with ECO 4?  >  > Don't think so. But try it.  >  I will try when I get some time   ! brigens,  Frhliche Weihnachten!    ------------------------------   End of INFO-VAX 2005.717 ************************