1 INFO-VAX	Fri, 03 Jun 2005	Volume 2005 : Issue 307       Contents:? Re: HP to help governments with tracking users with NAtional ID ? Re: HP to help governments with tracking users with NAtional ID $ Problems installing DW-MOTIF and LAT( Re: Problems installing DW-MOTIF and LAT( Pulling data from an old optical jukebox, Re: Pulling data from an old optical jukebox Re: Redirecting SMTP  F ----------------------------------------------------------------------  * Date: Thu, 2 Jun 2005 13:16:00 -0500 (CDT)* From: sms@antinode.org (Steven M. Schweda)H Subject: Re: HP to help governments with tracking users with NAtional ID2 Message-ID: <05060213160024_2860027B@antinode.org>  ; From: koehler@eisner.nospam.encompasserve.org (Bob Koehler)   L > In article <d7n910$i3r$1@news.mdx.ac.uk>, david20@alpha2.mdx.ac.uk writes: > > - > > What do you mean by a "closed election" ?  > 5 >    One controlled in all aspects by the Nazi party.   F    There are times when one wishes that someone, even the NSDAP, couldG enforce some relevance restrictions on the postings in this news group.   H ------------------------------------------------------------------------  4    Steven M. Schweda               (+1) 651-699-98183    382 South Warwick Street        sms@antinode.org     Saint Paul  MN  55105-2547    ------------------------------  % Date: Thu, 02 Jun 2005 21:34:45 +0800  From: prep@prep.synonet.com H Subject: Re: HP to help governments with tracking users with NAtional ID- Message-ID: <87u0kgswzu.fsf@prep.synonet.com>   * bill@cs.uofs.edu (Bill Gunshannon) writes:  B > Again, it's not the government that I would worry about. They doB > have oversight.  However, who watches your ISP?  And who is in a) > better position to monitor what you do?   : Masters, Visa and AmEx. I'm suprised you have to ask Bill!   --  < Paul Repacholi                               1 Crescent Rd.,7 +61 (08) 9257-1001                           Kalamunda. @                                              West Australia 6076* comp.os.vms,- The Older, Grumpier Slashdot. Raw, Cooked or Well-done, it's all half baked.F EPIC, The Architecture of the future, always has been, always will be.   ------------------------------   Date: 2 Jun 2005 11:12:20 -0700 ; From: "tomarsin2015@comcast.net" <tomarsin2015@comcast.net> - Subject: Problems installing DW-MOTIF and LAT C Message-ID: <1117735940.419163.131660@z14g2000cwz.googlegroups.com>    Hello D I am getting the following error when trying to install DWMOTIF on a 3100-85 with 64megs and VMS 7.3   + DEC VAXVMS DWMOTIF V1.2-6: DECwindows Motif ' @1988, 2000 Compaq Computer Corporation  Compaq Computer Corporation # This product uses the PAK: DW-MOTIF   %PCSI-F-NOSLOT, no PCB available" %PCSI-E-S_OPFAIL, operation failedC %PCSIUI-E-ABORT, operation terminated due to an unrecoverable error 	 condition   F Also the LAT service will start, but no LTA devices are created execpt LTA0. Thanks for any input phillip    ------------------------------   Date: 2 Jun 2005 11:37:34 -0700 % From: "djesys" <djesys@earthlink.net> 1 Subject: Re: Problems installing DW-MOTIF and LAT C Message-ID: <1117737454.625455.224430@g47g2000cwa.googlegroups.com>    Hello, Phillip,    tomarsin2015@comcast.net wrote:  > Hello F > I am getting the following error when trying to install DWMOTIF on a! > 3100-85 with 64megs and VMS 7.3  > - > DEC VAXVMS DWMOTIF V1.2-6: DECwindows Motif ) > @1988, 2000 Compaq Computer Corporation  > Compaq Computer Corporation % > This product uses the PAK: DW-MOTIF " > %PCSI-F-NOSLOT, no PCB available$ > %PCSI-E-S_OPFAIL, operation failedE > %PCSIUI-E-ABORT, operation terminated due to an unrecoverable error  > condition   F PRODUCT INSTALL needs to spawn a subprocess, but no more process slots> are available. Check the current value of the system parameterG MAXPROCESSCNT. Increase it by half or so, and enter the resulting value  into SYS$SYSTEM:MODPARAMS.DAT:   MIN_MAXPROCSSCNT = value  1 ...then, run AUTOGEN from GETDATA through REBOOT:   $ $ @SYS$UPDATE:AUTOGEN GETDATA REBOOT  H > Also the LAT service will start, but no LTA devices are created execpt > LTA0.   F Not sure what you're expecting here. LTA devices are created as neededB to service incoming connection requests, and are deleted when thatD process logs out. LTA devices for outbound connections are set up by7 the system manager as needed (usually for printers, but A "reverse-Telnet" has, for the most part, replaced "reverse-LAT").   C Note that LAT is a proprietary, non-routable protocol - it is not a D TCP/IP packet sub-type. LAT does not traverse IP routers, it must be' bridged transparently at high priority.    > Thanks for any input	 > phillip    Hope this helps    David J Dachtera djesys@comcast.net   ------------------------------   Date: 2 Jun 2005 11:24:51 -0700 % From: "RJDurkee" <RJDurkee@yahoo.com> 1 Subject: Pulling data from an old optical jukebox B Message-ID: <1117736691.325498.25870@g43g2000cwa.googlegroups.com>  ? We are trying to eliminate an old Openvms 6.2 system that has a F USDesign optical jukebox attached. I would like to, over time, ftp theF data from the jukebox platters to another system. However when I mountA a platter and do a DIR command, I do not see any data files nor a C directory that may contain data files, despite the fact that a SHOW 2 DEVICE command shows that the platter is 98% full. Here is typically what I get:  $ dir $1$oda41:[000000]  Directory $1$ODA41:[000000] 4 000000.DIR;1        ALLOC.SYS;1         BACKUP.SYS;1D BADBLK.SYS;1    BADLOG.SYS;1        BITMAP.SYS;1        CONTIN.SYS;14     CORIMG.SYS;1    GAPFILLER.VOS;1     INDEXF.SYS;12 SECURITY.SYS;1      VOLSET.SYS;1    WORKAREA.SYS;1  G Anybody got any ideas on how the data is stored and how to access it? I G figure there must be some process on the system that stored the data in D a non-standard VMS format, but I haven't figured out what it is yet.   Thanks for any help    Rich Durkee    ------------------------------  $ Date: Thu, 2 Jun 2005 15:38:41 -0400 From: norm.raphael@metso.com5 Subject: Re: Pulling data from an old optical jukebox Q Message-ID: <OF880E7566.60F057E2-ON85257014.006B13DB-85257014.006BE55E@metso.com>   @ "RJDurkee" <RJDurkee@yahoo.com> wrote on 06/02/2005 02:24:51 PM:  A > We are trying to eliminate an old Openvms 6.2 system that has a H > USDesign optical jukebox attached. I would like to, over time, ftp theH > data from the jukebox platters to another system. However when I mountC > a platter and do a DIR command, I do not see any data files nor a E > directory that may contain data files, despite the fact that a SHOW 4 > DEVICE command shows that the platter is 98% full. > Here is typically what I get:  > $ dir $1$oda41:[000000]  > Directory $1$ODA41:[000000]  > 000000.DIR;1 = root directory > BACKUP.SYS;1 > BADBLK.SYS;1 > BADLOG.SYS;1 > BITMAP.SYS;1 > CONTIN.SYS;1 > CORIMG.SYS;1 > INDEXF.SYS;1 > SECURITY.SYS;1 > VOLSET.SYS;13 = ODS2 file system files created by INITIALIZE/DISK  > GAPFILLER.VOS;1 , is probably your data in some container file
 > ALLOC.SYS;1  > WORKAREA.SYS;16 these 2 are new to me, but may be application-related.  : No data directories (".dir) seem to exist except the root.   > I > Anybody got any ideas on how the data is stored and how to access it? I I > figure there must be some process on the system that stored the data in F > a non-standard VMS format, but I haven't figured out what it is yet. >   C Try DIRECTORY/FULL on non-ODS2 files.  Also on the others?  Is this * a VOLUME SET - spanning multiple platters?   > Thanks for any help  > 
 > Rich Durkee  >    ------------------------------  * Date: Thu, 2 Jun 2005 23:35:42 +0000 (UTC)- From: klewis@OMEGA.MITRE.ORG (Keith A. Lewis)  Subject: Re: Redirecting SMTP . Message-ID: <d7o54e$51k$1@newslocal.mitre.org>   dave.baxter@bannerhealth.com writes in article <1117751982.312959.183550@g44g2000cwa.googlegroups.com> dated 2 Jun 2005 15:39:42 -0700: H >    Our Spam blocker Guy is trying to restrict outgoing SMTP traffic to# >the internet for security reasons. F >    I use it quite a bit for internet paging direct from DCL scripts.D >    The spam guy wants me to redirect my SMTP stuff through a localE >server SMTP.Bannerhealth.com.    I have absolutely no idea how to do ! >this, or even if it can be done,   K Assuming you're using "tcp/ip services for Openvms", what you need to do is C set up a general gateway.  See "TCPIP HELP SET CONF SMTP /GATEWAY".   0 --Keith Lewis              klewis {at} mitre.org> The above may not (yet) represent the opinions of my employer.   ------------------------------   End of INFO-VAX 2005.307 ************************