1 INFO-VAX	Tue, 29 Mar 2005	Volume 2005 : Issue 176       Contents:0 Re: ServerWatch: HP Shows Some OpenVMS Integrity Re: shadow minicopy  Re: shadow minicopy   F ----------------------------------------------------------------------  % Date: Tue, 29 Mar 2005 10:27:48 -0500 6 From: Brad Hamilton <brMadAhaPmiSlton@coMmcAasPt.Snet>9 Subject: Re: ServerWatch: HP Shows Some OpenVMS Integrity 0 Message-ID: <pdudnWU8AKln7tTfRVn-2g@comcast.com>   Kenneth Farmer wrote: 9 > http://www.serverwatch.com/hreviews/article.php/3493286   < OK, good article about OpenVMS, but I _do_ have a complaint.  A Why does the author open the article with the following sentence:   H "The writing has been on the wall for OpenVMS on AlphaServer ever since # Compaq gobbled up DEC in the '90s."   H The busy executive, reading that first sentence, would be loath to read ? the rest of the article, thinking it yet another piece of news  E confirming the death of VMS.  Too many people still believe that the  G death of Alpha = the death of VMS.  Why re-inforce this misconception,   even inadvertently?   = I suppose we should be happy that it's even mentioned at all.    ------------------------------    Date: 29 Mar 2005 01:04:19 -0800% From: Bart.Zorn@xs4all.nl (Bart Zorn)  Subject: Re: shadow minicopy< Message-ID: <a98cd882.0503290104.fcae77c@posting.google.com>  S "Tom Linden" <tom@kednos.com> wrote in message news:<opsodm8x0rzgicya@hyrrokkin>...       [ S n i p . . . ]  I > OK, now I am more confused.  I have three shadow sets (with two members H > each) on a shared scsi bus which can have two to four nodes (dependingK > on what I decide to boot) but lets say three.  Do I successively dismount J > one member from each shadow set from each node (with minicopy) and the   > mount % > again with minicopy from each node?   K Adding/removing members from an existing shadow set is always cluster wide. G You cannot selectively mount/dismount a single member on a single node.   	 Bart Zorn    ------------------------------    Date: 29 Mar 2005 06:33:19 -0800 From: tom@kednos.com Subject: Re: shadow minicopyC Message-ID: <1112106799.237389.116730@l41g2000cwc.googlegroups.com>    Bart Zorn wrote:0 > "Tom Linden" <tom@kednos.com> wrote in message$ news:<opsodm8x0rzgicya@hyrrokkin>... >  >    [ S n i p . . . ] > C > > OK, now I am more confused.  I have three shadow sets (with two  members ? > > each) on a shared scsi bus which can have two to four nodes 
 (dependingD > > on what I decide to boot) but lets say three.  Do I successively dismountF > > one member from each shadow set from each node (with minicopy) and the 	 > > mount ' > > again with minicopy from each node?  > G > Adding/removing members from an existing shadow set is always cluster  wide. C > You cannot selectively mount/dismount a single member on a single  node.  >  > Bart Zorn E I know that, but the question is does it have to be repeated for each  node in the G cluster?  If I only do it for node A and then Node B for some reason is  rebooted? then doesn't B also have to dismount and mount clusterwide with 	 minicopy?    ------------------------------   End of INFO-VAX 2005.176 ************************