My "how to get into programming instructions" 

1-Turn radio on.
2-short rear most pins (top and bottom furthest from front)
3-press and hold FCN
ETHER 4a or 4b
4a-At "----Id" let go of FCN, stop shorting pins and enter password. In the upper left of the
display you will see "prog". You are now in programming.

4b-If there is no password. In the upper left of the display you will see "prog". Let go of FCN
and stop shorting the pins. You are now in programming.

If there is a password and you don't know it, you will need the software and cable (but try
000000). 
--------------------
www.hackersrussia.ru