Delete Backup

1	Introduction
1.1	Prerequisites
2	Procedure

1 Introduction

This document describes how to delete a backup.

1.1 Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1 Conditions

The following conditions must apply:

No other backup operation is in progress.
The backup type is known.
The name of the backup to delete is known.
An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

2 Procedure

To delete a backup:

Navigate to the BrmBackupManager managed object, for example:
>dn ManagedElement=NODE06ST,SystemFunctions=1,BrM=1,BrmBackupManager=SYSTEM_DATA
Start the delete operation, for example:
(BrmBackupManager=SYSTEM_DATA)>deleteBackup PERF_BACKUP_NAME1_20140428_175907

The system returns output true or false.

Verify that the backup was successfully deleted:

(BrmBackupManager=PERF_BACKUP_NAME1_20140428_175907)>show progressReport

After a backup is successfully deleted, the progress report shows the following:

[...]
actionName="DELETE"
additionalInfo="Delete Backup for PERF_BACKUP_NAME1_20140428_175907:⇒
Succeeded"
progressInfo=""
progressPercentage=100
result=SUCCESS
resultInfo="PERF_BACKUP_NAME1_20140428_175907 was deleted ⇒
successfully."
state=FINISHED
[...]

If an error occurs during the execution of the operation, attribute reportProgress shows result=FAILURE and resultInfo shows the cause of the failure.

For more information on the progress report, refer to View Progress Report.