| Managed Object Model 543/155 54-LZN 708 0672/5-V1 Uen A |
Differences in Classes of
| Compared to |
| class AuthenticationOrder removed |
| class AuthorizationOrder removed |
| class SwM removed |
| class SwVersionMain removed |
| class UpgradePackage removed |
| class Apns new |
| class AVP new |
| class ClientAddress new |
| class Config new |
| class Connection new |
| class DbsFmRoot new |
| class EDTarget new |
| class EDTargets new |
| class Equipment new |
| class FlexibleDiameter new |
| class GeneralConf new |
| class LmDummyInstance new |
| class NetsharedConfig new |
| class NtpServerConf new |
| class PeerAddress new |
| class PeerCluster new |
| class ServerAddress new |
| class ArwaConfiguration changed |
| class BrmBackup changed |
| class BrmBackupLabelStore changed |
| class BrmBackupManager changed |
| class BrmBackupScheduler changed |
| class BrmRollbackAtRestore changed |
| class CustomRole changed |
| class DiameterNode changed |
| class EDSource changed |
| class Fm changed |
| class FmAlarm changed |
| class FmAlarmModel changed |
| class FmAlarmType changed |
| class GeoRedManager changed |
| class MeasurementReader changed |
| class MeasurementType changed |
| class NeLSConfiguration changed |
| class PccConfig changed |
| class PmGroup changed |
| class PmJob changed |
| class PmMeasurementCapabilities changed |
| class Tls changed |
| class UserManagement changed |
| Enables configuration of the Arwa server connection properties. Deprecated: Arwa is no longer supported since LM6.0 |
| The stucture used to report the progress and final result of asynchronous actions. actions.
[Deprecated - Replaced by progressReport] Deprecated: Replaced by progressReport |
| This includes a list of storage owners that participate in a backup.
This backup which is used by BRM when restoring or deleting the backup. |
| Date and time when the backup was created (start time of backup procedure) procedure). |
| Specifies the location (url) where the backup is to be exported or exported.
Or the resource name (urn) that encapsulates the backup export procedure. |
| Represents the progress report and final result of the ongoing (asynchronous) action in this MO, for example restore.
MO.
This MO supports only one action to be executed at a time. time. |
| Restore from this backup. backup.
This is an asynchronous action - progress and result will be reported in the progressReport attribute. |
| The This is the administrative data portion of active software version(s) as of backup.
This information is specified in the software inventory management when the backup is created. created. |
| Specifies a list of backups, by their name, backup names, in the order that shall be used to restore the ME if need be.
Specifically, the first element of this ordered list identifies the 'primary restore candidate'. Should the attempt to restore the ME with a given backup fail, the next backup in the list must be tried. |
| The structure used to report the progress and final result of asynchronous actions. actions.
[Deprecated - Replaced by progressReport] Deprecated: Replaced by progressReport |
| Backup domain, for example System System. |
| Creates a new backup of the backupType and backupDomain managed by the BackupManager. BackupManager.
This is an asynchronous action - progress and result will be reported in the ReportProgress attribute. |
| Delete a backup specified by its name and of the backupType type and backupDomain domain managed by this BackupManager. BackupManager.
This is an asynchronous action - progress and result will be reported in the progressReport attribute. |
| Specifies the location (url) of the backup to import or the import.
Orthe resource name (urn) that encapsulates the backup import procedure. procedure. |
| Represents the progress report and final result of the ongoing (asynchronous) action, for example createBackup.
action.
This MO supports only one action to be executed at a time. time. |
| Password used by backup scheduler when automatically exporting a scheduled backup.
If autoExport attribute if is set to ENABLED, this password will be used for authentication when automatically exporting the scheduled backup. |
| Uri used by backup scheduler when automatically exporting a scheduled backup.
If autoExport attribute if is set to ENABLED, this uri specifies the location to which the scheduled backup will be automatically exported. |
| Provides optional support for confirmation of Confirm a restore action or automatic rollback after an unconfirmed restore operation was executed.
The existence of an instance of this class indicates that this feature is supported by the implementation. implementation. This is optional support. |
| Number of seconds to wait for action confirmRestore to invoke before performing the rollback to the state before restore. |
| Cluster pattern. For clustered systems (logical system composed of several different Origin-Host), the pattern to match with the received Origin-Host. The pattern can include any number of wildcards (example: *realm*.com). If no wildcard is specified the pattern matches with the ending part of the received Origin-Host. Origin-Host (example: pcefrealm.com). |
| Password used by the Entity Data Source to connect to a given external DB DB. |
| The value component of Holds the RDN. name used when identifying the MO. |
| The perceived severity of the alarm. It may change during the alarm's lifetime. Specification: RFC3877 |
| Further information about the problem. The information is represented as a set of data structures with two items of information, an identifier and a problem description. This is typically used to provide information referred to by value. It may change during the OPI. alarm's lifetime. |
| Extra information about the alarm. It may change during the alarm's lifetime. |
| The general General category for the alarm. The allowed values are defined by Specification: ITU-T X.733. X.733 X.736 |
| The value component of Holds the RDN. name used when identifying the MO. |
| The perceived severity level set when the alarm was raised. This attribute is set when the alarm is raised and It will not change during the alarm's lifetime. Specification: RFC3877 |
| Provides further refinement to the information given by probableCause. Can be used to find an associated operating instruction (OPI). |
| The value component of Holds the RDN. name used when identifying the MO. |
| Gives the possibility to configure the perceived severity for a certain alarm all alarms of this type. If set, this value overrides the perceived severity provided by the alarming object. Setting this attribute has no impact on existing alarms, only new and updated ones. Specification: RFC3877 |
| The default perceived severity of the alarm type. The value indicates the severity for all alarms of this type. No value indicates that there is no fixed severity and that the severity is decided by the alarming object depending on the fault. Not set means alarms of this type can be assigned different severities. Specification: RFC3877 |
| The general General category for the alarm. The allowed values are defined by ITU-T X.733.
alarm type.
Specification: ITU-T X.733, X.736 |
| The value component of Holds the RDN. name used when identifying the MO. |
| Indicates whether the alarm type represents an alarm (has a state) or an alert (has no state). true True indicates an alarm and false alarm. False indicates an alert. alert (stateless alarm). |
| old: |
|
|
| new: |
| Qualifies and provides further information on the reason for the event. A standard set of probableCause values is provided in the ERICSSON-ALARM-PC-MIB. Specification: ITU-T M.3100, X.733, X.736; ETSI GSM 12.11. |
| Provides further refinement to the information given by probableCause. Can be used to find an associated operating instruction (OPI). |
| Represents the capability to read the value of the MeasurementType or group of MeasurementTypes.
There can be many Measurement Reader instances for each job (one for each MeasurementType or PmGroup). For a Threshold Job, only a MeasurementType instance can be referenced by the the Measurement Reader. |
| Value component of Holds the RDN. name used when identifying the MO. |
| Target MO instance or instances.
It is possible to select one or more MO instances as the specific target of the job. If this attribute is not present set, the job will be is applied to all MO instances relevant to the selected PmGroup or MeasurementType. |
| Threshold direction for a Threshold Job. Specifies the threshold direction.
Used when the thresholdDirection in the MeasurementType instance is not set. If neither is set, the default value is used. Only applicable when jobType = THRESHOLDJOB. |
| Time interval used for monitoring the Measurement Type against a threshold.
Specifies, for Threshold Monitoring of a Cumulative Counter Measurement Type, how to calculate the value of the Measurment Measurement Type used to compare against the threshold. threshold. Only applicable when jobType = THRESHOLDJOB. |
| Specifies the sample rate for DER counters.
Defined as according to 3GPP 32.401. Data related to a particular event is captured. Every nth event is registered, where n can be 1 or greater. This attribute defines n. This attribute is not valid for non-DER Measurement Types. Only applicable when collectionMethod = DER. |
| FmAlarmType associated to Threshold Monitoring of this MeasurementType.
If No value means that this attribute has not been assigned, this MeasurementType is not available for selection for a PM Threshold Job. |
| The initial value to which a counter must be the Measurement Type is set at the beginning of a new granularity period.
This attribute is only valid if Only applicable when resetAtGranPeriod = true. No value means it is reset to 0. |
| Indicates if the MeasurementType result is in compressed format.
For MeasurementTypes with multiplicity greater than 1, the result can be compressed by only reporting the non-zero values. A detailed explanation of the format of the measurement result is given in the measurementResult attribute. attribute. No value means that this MeasurementType is not compressed. |
| old: |
|
|
| new: |
| Contains a description of expected result value or values.
For example, result will be a "a single integer value. value". See 3GPP 32.404. |
| Value component of Holds the RDN. name used when identifying the MO. |
| Where a counter is an array of values, this attribute represents the size of the array. array.
Where it produces a single value, this attribute is set to 1. |
| Specifies whether the value is initialized at the beginning of each granularity period.
No value means that this MeasurementType is not initialized at the beginning of each granularity period. |
| The threshold direction of a Measurement Type value which raises the Threshold Alarm severity.
The attribute is assigned set if this MeasurementType shall only be monitored in one direction in a PM Threshold Job. If it can be monitored in either direction, then the direction will be set as part of the threshold job creation. creation by setting thresholdDirection in MeasurementReader. Only applicable if fmAlarmType is set. |
| The Managed Object Class that uses the Measurement Types in this PmGroup. PmGroup.
No value means this PM Group is not associated with any specific Managed Object Class. |
| Indicates file compression type to be applied to the report file.
If no value is supplied, set, then no compression is to be applied to the report file for this job. Only valid for PM jobs of type MEASUREMENTJOB. Must have the same value for all PM jobs with the same jobGroup tag assigned. and reportingPeriod assigned. Must have the same value for all PM jobs for which no jobGroup tag is assigned (the "default" jobGroup), but the same reportingPeriod assigned. Only applicable when jobType = MEASUREMENTJOB. |
| Describes the level of MS control of the PM job. job.
If no value is set, the MS shall treat it as FULL. |
| Tag for grouping PM measurement job results.
Represents a grouping of separate PM Jobs for which the measurement results must be collected together in a single report file for that group only. only. If this attribute is not set, then for each reporting period, the measurement results for this job are written to the same report file as other jobs that have no job group assigned. Only applicable when jobType = MEASUREMENTJOB. |
| Contains the reporting period of the result file.
This is directly related to the granularity period as the granularity period can not be longer than the reporting period. Possible Values (s=second,m=minute, h=hour): 10s,30s,1m, 5m, 15m, 30m, 1h, 12h, 24h. Default Value: 15m. Report files are only generated for jobs of jobType MEASUREMENTJOB. The value of reportingPeriod must be equal to the value of granularityPeriod if fileRPSupported in PmMeasurementCapabilities is false, or may be equal to a multiple of the value of granularityperiod granularityPeriod if fileRPSupported is set to true. true. Only applicable when jobType = MEASUREMENTJOB. |
| Defines whether or not the Managed Element aligns its reporting periods to the hour. hour.
Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as true. |
| old: |
|
|
| new: |
| Deprecated, contains the file storage path to the measurement files on the ME.
This attribute is only set if FileM is present, and refers to the file storage path. If this attribute is not set, the file storage path is stored locally in the fileLocation attribute in PmMeasurementCapabilities. Deprecated in ECIM PM 2.0. Deprecated: References to attributes in FileM must be removed from Common Fragments. fileLocation attribute contains all required information. Deprecated in ECIM PM 2.0. |
| Contains the path to the virtual file system on the node from which to fetch the measurement files. files.
Only applicable when measurementJobSupport = true. |
| Specifies if ME supports a file Reporting Period different to Granularity Period where RP > GP. GP.
Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as false. |
| old: |
|
|
| new: |
| Indicates if measurement file for the last ROP Result Output Period (ROP) is expected.
When a measurement job is stopped, this attribute specifies whether a result file for the last ROP is expected (true), or not expected (false). (false). Only applicable when measurementJobSupport = true. |
| Indicates if Managed Element supports grouping of selected measurement job results in a report file.
If set to true, the ME groups selected measurement job results into one file per reporting period based on the PmJob attribute jobGroup. If set to false, the default behaviour is to generate one a single PM report file per granularity period. reporting period for all jobs. Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as false. |
| old: |
|
|
| new: |
| Defines whether or not measurement jobs can be stopped by the system.
Based on the priority of the Measurement jobs, they can either be stopped (true) or not (false) by the system. Attribute jobPriority in the job sets the priority per job. job. Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as false. |
| old: |
|
|
| new: |
| Specifies whether or not Performance Management jobs defined in the ME can be started and stopped.
Possible values: NONE: a job is started when it is created and runs until it is deleted. BASIC: simple start/stop supported supported. |
| The maximum number of counter instances, i.e. active counters, that can be reported in one ROP.
This is used by an MS to determine the max PM data file size. An alarm is issued if the total number of simultaneously active counters becomes higher than the value defined in this attribute. This is an upper-system limit, and support for it cannot be guaranteed in high-load conditions. conditions. A value of 0 means there is no limit. Only applicable when measurementJobSupport = true. |
| Specifies the maximum number of Result Output Period (ROP) files that are maintained in the ME.
If a new file is created and the limit is exceeded, the oldest file is deleted. This is an upper-system limit, and support for it cannot be guaranteed in high-load conditions. conditions. Only applicable when measurementJobSupport = true. |
| Indicates if Managed Element supports Measurement Job Types. Jobs. |
| old: |
|
|
| new: |
| Deprecated, Indicates if the PM report files are produced using UTC format.
If the timestamp is expressed in UTC time with no offset, then the value shall be is true. If the timestamp is expressed in local time with UTC offset, then the value shall be false. is false. Only applicable when measurementJobSupport = true. Deprecated in ECIM PM 2.5. Deprecated: Attribute definition was ambiguous. It is replaced by new attribute ropFilenameTimestamp. Deprecated in ECIM PM 2.5. |
| old: |
|
|
| new: |
| old: |
|
|
| new: |
| Indicates which compression types are supported by the ME for report files.
If this attribute is not present, the ME does not support No value means that compression of report files. files is not supported. Only applicable when measurementJobSupport = true. |
| Indicates which granularity periods are supported by the ME for Measurement jobs. jobs.
Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as a single value of FIFTEEN_MIN. |
| Indicates the Result Output Period (ROP) or ROPs supported by the ME. ME.
Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as a single value of FIFTEEN_MIN. |
| Indicates which granularity periods are supported by the ME for Realtime jobs. jobs.
Only applicable when realTimeJobSupport = true. If no value is set, the MS shall treat it as a single value of ONE_MIN. |
| Indicates which granularity periods are supported by the ME for Threshold jobs. jobs.
Only applicable when thresholdJobSupport = true. If no value is set, the MS shall treat it as a single value of FIFTEEN_MIN. |
| old: |
|
|
| new: |
| old: | DEFAULT | |
| new: | kEECDH:kEDH:kRSA:!kPSK:!aPSK:!aDSS:!aNULL:!NULL:!SEED:!3DES:!DES:!MD5:!RC4:!CAMELLIA |
| old: | * | |
| new: | 255 |
| old: | ||
| new: |
|