class Apns

+-PolicyControlFunction

+-Network

+-Apns

It represents the APN configuration data.

Attributes
`string key mandatory noNotification restricted`	`apnsId` Identifies the instance of this class. Forced value=1.
`string[0..]`	`emergencyIds` The list of APN identifiers restricted to emergency services.

class Apns

class AppConfig

ManagedElement

+-PolicyControlFunction

+-AppConfig

+-PccConfig [1..1]

Holds general SAPC application level configuration data.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`appConfigId` Identifies the instance of this class. Forced value = 1.
`boolean[0..1] noNotification`	`enableReauthsOnSubsChange = true` Enables subscriber change reauthorizations. Indicates if it is enabled the sending of reauthorizations to the traffic gateway, when subscriber profile is changed. To prevent traffic overload, set it to false when doing massive subscriber changes.
`boolean[0..1] noNotification`	`enableReauthsOnToD = true` Enables Time of Day reauthorizations. Indicates if it is enabled the sending of reauthorizations to the traffic gateway owing to Time of Day internal events. To prevent traffic overload, set it to false when foreseen a large number of reauthorizations owing to ToD during a period of time.

class AppConfig

class ArwaConfiguration

ManagedElement

+-SystemFunctions

+-Lm

+-ArwaConfiguration

Enables configuration of the Arwa server connection properties.

This MO is created by the system.

Deprecated: Arwa is no longer supported since LM6.0

Actions
`boolean`	`connectToArwa ( );` connectToArwa will provide the action id result if the invocation is successful. Note: This action is only supported in LM deployments with an intermittent connection to Arwa.
`boolean`	`installCustomerMetadataFile ( string uri , EcimPasswordString password );` Initiates the installation of the Client Metadata file defined by the URI given as parameter. e.g. installClientMetadataFile file:///tmp/clientMetadata.xml Return value is TRUE in case the initiation succeeded or FALSE otherwise. installClientMetadataFile /tmp/clientMetaData.xml Parameters Name: uri Description: The URI of the metadata file that is to be installed. The URI may refer to a local (e.g., file:///data/dir/subdir/rbs006.xml) or to a remote (e.g., sftp://myuser@myhostname.ericsson.local/dir/subdir/rbs006.xml) file. If user name is needed to access the referenced file then the URI shall include the user name. The URI must not contain password. The generic URI syntax is defined by RFC 2396. sftp support is reserved for future use. Name: password Description: Password to access the referenced file. If authentication is not password based, this parameter will be ignored. This parameter is reserved for future use.

Attributes
`string key mandatory noNotification restricted`	`arwaConfigurationId` Holds the name used when identifying the MO.
`string[0..1] readOnly`	`customerName` Name of the current customer (eg. Customer1)
`DateTime[0..1] readOnly`	`licenseServerLastSuccessfulConnectTime` Last time of successful connection. i.e. “Fri, Dec 19, 2014 12:41:39 PM” Note: This attribute is only applicable to LM deployments with an intermittent connection to Arwa.
`DateTime[0..1] readOnly`	`licenseServerPlannedConnectEvent` Next Schedule for a planned connection to the Arwa server. NULL if it is PERMANENT connection. Note: This attribute is only applicable to LM deployments with an intermittent connection to Arwa.
`AsyncActionProgress[0..1] readOnly`	`reportProgress` Reports if the Arwa connection was successful or not.

class ArwaConfiguration

class AutonomousMode

ManagedElement

+-SystemFunctions

+-Lm

+-AutonomousMode

Autonomous Mode state information.

This MO is created by the system.

Attributes
`LmActivationState readOnly`	`activationState` Autonomous Mode activation state.
`string key mandatory noNotification restricted`	`autonomousModeId` The value component of the RDN.
`DateTime readOnly`	`expiration` Expiry date and time of Autonomous Mode. The value is NULL if the activation state is INACTIVE.

class AutonomousMode

class AVP

ManagedElement

+-PolicyControlFunction

+-FlexibleDiameter

+-AVP

Contains AVP definition, used to transform AVPs in Diameter messages.

Attributes
`uint32[0..1]`	`avpCode` The code of the AVP.
`AvpDataTypesEnum[0..1]`	`avpDataType` Identifies the AVP data type.
`string key mandatory noNotification restricted`	`avpId` Name of the AVP.
`boolean[0..1]`	`avpMandatoryFlag` Indicates whether support of the AVP is required.
`boolean[0..1]`	`avpProtectedFlag` Indicates the need for encryption for end-to-end security.
`uint32[0..1]`	`avpVendor` The vendor of the AVP.

class AVP

class BrM

ManagedElement

+-SystemFunctions

+-BrM

+-BrmBackupManager [0..]

+-BrmRollbackAtRestore [0..1]

BrM Root MO class.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`brMId` The value component of the RDN.
`string[0..1]`	`exportPackageLabelPrefix` Free text to help better identify a backup export package when residing outside the ME. If specified, BRM prepends this prefix to the label that it generates for the backup export package.

class BrM

class BrmBackup

ManagedElement

+-SystemFunctions

+-BrM

+-BrmBackupManager

+-BrmBackup

Represents one backup of the type and domain specified by the BrmBackupManager in which it is contained.

This MO is created by the system.

Actions
`boolean`	`cancelCurrentAction ( );` Cancel an ongoing asynchronous restore or export operation.
`boolean`	`export ( string uri , EcimPasswordString password );` Export the backup using the specified uri. This is an asynchronous action; progress and result will be reported in the progressReport attribute. Note that when finished successfully, a copy of the backup has been transferred and the original backup remains in the ME. Parameters Name: uri Description: Specifies the location (url) where the backup is to be exported. Or the resource name (urn) that encapsulates the backup export procedure. Name: password Description: The password required to access the location specified by the uri. If no password is required, this parameter may be omitted.
`boolean`	`restore ( );` Restore from this backup. This is an asynchronous action - progress and result will be reported in the progressReport attribute.

Attributes
`BrmAsyncActionProgress[0..1] noNotification readOnly`	`asyncActionProgress` The stucture used to report the progress and final result of asynchronous actions. [Deprecated - Replaced by progressReport] Deprecated: Replaced by progressReport
`string readOnly`	`backupDescriptor` This includes a list of storage owners that participate in a backup. This backup is used by BRM when restoring or deleting the backup.
`string readOnly`	`backupName` Backup name, provided by the operator.
`string key mandatory noNotification restricted`	`brmBackupId` The value component of the RDN.
`DateTime readOnly`	`creationTime` Date and time when the backup was created (start time of backup procedure).
`BrmBackupCreationType readOnly`	`creationType` Creation type; whether manually created or automatically via BrmBackupScheduler.
`BrmAsyncActionProgress[0..1] readOnly`	`progressReport` Represents the progress report and final result of the ongoing (asynchronous) action in this MO. This MO supports only one action to be executed at a time.
`BrmBackupStatus readOnly`	`status` Status of the backup.
`ProductData[0..] readOnly`	`swVersion` This is the administrative data portion of active software version(s) of backup. This information is specified in the software inventory management when the backup is created.

class BrmBackup

class BrmBackupHousekeeping

ManagedElement

+-SystemFunctions

+-BrM

+-BrmBackupManager

+-BrmBackupHousekeeping

Provides optional support for automated housekeeping of manually created backups.

If autoDelete is set to ENABLED, before creating a new manual backup, BRM first checks the number of manual backups and if the limit specified by the value of maxStoredManualBackups is reached, BRM removes the oldest manual backup before creating a new one.

This MO is created by the system.

Attributes
`BrmManualBackupAutoDelete[0..1]`	`autoDelete = ENABLED` Determines whether automated housekeeping of manual backups is enabled. If ENABLED and the number of backups already stored on the ME is equal to the value of maxStoredManualBackups, BRM removes the oldest backup before creating a new one. If set to DISABLED, BRM does not attempt to remove the oldest backup and instead returns failure when createBackup() is invoked.
`string key mandatory noNotification restricted`	`brmBackupHousekeepingId` The value component of the RDN.
`uint32[0..1]`	`maxStoredManualBackups = 100` Maximum number of manual backups (per backup type) to store in the ME. When this limit is reached, if autoDelete=ENABLED, BRM removes the oldest manual backup before creating a new one; otherwise, an error is returned when createBackup() is invoked and the NMS must do the required housekeeping before attempting to create a new backup.

class BrmBackupHousekeeping

class BrmBackupLabelStore

ManagedElement

+-SystemFunctions

+-BrM

+-BrmBackupManager

+-BrmBackupLabelStore

Provides optional support for labeling of certain backups.
This class contains attributes that help distinguish certain backups such as the last restored backup, primary restore candidate, and so on.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`brmBackupLabelStoreId` The value component of the RDN.
`string[0..1] readOnly`	`lastCreatedBackup` The name of the last created backup. This backup may be MANUAL or SCHEDULED. Note that this attribute will not be updated in case of a failed attempt to create a backup resulting in an INCOMPLETE backup.
`string[0..1] readOnly`	`lastExportedBackup` The name of the last exported backup from the ME. Note that this attribute will not be updated in case of a failed attempt to export a backup.
`string[0..1] readOnly`	`lastImportedBackup` The name of the last imported backup to the ME. Note that this attribute will not be updated in case of a failed attempt to import a backup.
`string[0..1] readOnly`	`lastRestoredBackup` The name of the backup that has been last used to restore the ME. This does not imply that the currently running version of the system is the same as this backup, but instead shows which one of the backups has last been used to restore the ME. In a system which has never been restored using a backup, this attribute is empty.
`string[0..] ordered readOnly`	`restoreEscalationList` Specifies a list of backup names, in the order that shall be used to restore the ME if need be. Specifically, the first element of this ordered list identifies the 'primary restore candidate'. Should the attempt to restore the ME with a given backup fail, the next backup in the list must be tried.

class BrmBackupLabelStore

class BrmBackupManager

ManagedElement

+-SystemFunctions

+-BrM

+-BrmBackupManager

+-BrmBackup [0..]

+-BrmBackupHousekeeping [0..1]

+-BrmBackupLabelStore [0..1]

+-BrmBackupScheduler [0..1]

+-BrmFailsafeBackup [0..1]

Serves as container for Backup instances of a particular backupType and backupDomain.

This class also provides the actions for creating new backups, importing backups from other locations, and deleting existing backups of the corresponding type and domain.

This MO is created by the system.

Actions
`boolean`	`cancelCurrentAction ( );` Cancel an ongoing asynchronous createBackup, deleteBackup, or importBackup operation.
`boolean`	`createBackup ( string name );` Creates a new backup of the backupType and backupDomain managed by the BackupManager. This is an asynchronous action - progress and result will be reported in the ReportProgress attribute. Parameters Name: name Description: The name of the backup to create. If specified, input name validation is done by the implementation to forbid illegal names. Backup name validation rules are defined by the implementation and include duplicate backup names, names exceeding maximum allowed length, etc. If not specified, the implementation will generate a backup name automatically with format defined by the implementation, example: <managedElementId>_<YYYY-MM-DDThh-mm-ss>.
`boolean`	`deleteBackup ( string name );` Delete a backup specified by its name and of the type and domain managed by this BackupManager. This is an asynchronous action - progress and result will be reported in the progressReport attribute. Parameters Name: name Description: The name of the backup to delete.
`boolean`	`importBackup ( string uri , EcimPasswordString password );` Import a backup using the specified uri. This is an asynchronous action; progress and result will be reported in the progressReport attribute. Note that the type and domain of the backup to be imported must match the backup type and domain indicated by the instance of the backup manager on which this action is invoked. Parameters Name: uri Description: Specifies the location (url) of the backup to import. Orthe resource name (urn) that encapsulates the backup import procedure. Name: password Description: The password required to access the location specified by the uri. If no password is required, this parameter may be omitted.

Attributes
`BrmAsyncActionProgress[0..1] noNotification readOnly`	`asyncActionProgress` The structure used to report the progress and final result of asynchronous actions. [Deprecated - Replaced by progressReport] Deprecated: Replaced by progressReport
`BrmAutoExport[0..1]`	`autoExport = DISABLED` Determines whether a manual backup is to be automatically exported at successful creation. If set to ENABLED, the manual backup most recently created is exported to the location specified by attribute autoExportUri after it is successfully created. Note that the automatic export is only triggered if creation of the manual backup was successful. Otherwise, no export operation is triggered, even if this attribute is set to ENABLED. Also, note that setting this attribute to ENABLED has no impact on the manual backups that were already created and stored prior to the new configuration.
`EcimPassword[0..1]`	`autoExportPassword` Password used by the manual backup when automatically exporting a manually created backup. If autoExport attribute if set to ENABLED, this password will be used for authentication when automatically exporting the manually created backup.
`string[0..1]`	`autoExportUri` Uri used by the manual backup when automatically exporting a manual created backup. If attribute autoExport is set to ENABLED, this uri specifies the location to which the manual created backup is automatically exported.
`string readOnly`	`backupDomain` Backup domain, for example System.
`string readOnly`	`backupType` Type of backup; System Data or User Data.
`string key mandatory noNotification restricted`	`brmBackupManagerId` The value component of the RDN.
`string[0..1]`	`manualBackupName` The configurable portion of the manual backup name. The format of generared backups are named <manualBackupName>-<creation date and time>, where creation date and time is of type DateTime defined in the common library. Note: <creation date and time> will based on local time when operatior issues action request
`BrmAsyncActionProgress[0..1] readOnly`	`progressReport` Represents the progress report and final result of the ongoing (asynchronous) action. This MO supports only one action to be executed at a time.

class BrmBackupManager

class BrmBackupScheduler

ManagedElement

+-SystemFunctions

+-BrM

+-BrmBackupManager

+-BrmBackupScheduler

+-BrmCalendarBasedPeriodicEvent [0..]

+-BrmPeriodicEvent [0..]

+-BrmSingleEvent [0..]

Provides optional support for scheduling of backup creation.

Each instance of BrmBackupScheduler MOC serves as the backup scheduler for the backup type indicated by its parent instance of BrmBackupManager. The scheduled backup event(s) can be instance(s) of BrmSingleEvent MOC, BrmCalendarBasedPeriodicEvent MOC, or BrmPeriodicEvent MOC contained in the instance of BrmBackupScheduler.

This MO is created by the system.

Attributes
`BasicAdmState[0..1]`	`adminState = UNLOCKED` Administrative state of the scheduler.
`BrmAutoExport[0..1]`	`autoExport = DISABLED` Determines whether a scheduled backup should be automatically exported upon successful creation. If set to ENABLED, the scheduled backup specified by the attribute 'mostRecentlyCreatedAutoBackup' will be exported to the location specified by the attribute 'autoExportUri' after it has been successfully created. Note that the automatic export will be triggered ONLY IF the creation of the scheduled backup has been successful; otherwise, no export operation will be triggered even if this attribute has been set to ENABLED. Also, note that setting this attribute to ENABLED has no impact on the scheduled backups that have already been created and stored prior to the new configuration.
`EcimPassword[0..1]`	`autoExportPassword` Password used by backup scheduler when automatically exporting a scheduled backup. If autoExport attribute is set to ENABLED, this password will be used for authentication when automatically exporting the scheduled backup.
`string[0..1]`	`autoExportUri` Uri used by backup scheduler when automatically exporting a scheduled backup. If autoExport attribute is set to ENABLED, this uri specifies the location to which the scheduled backup will be automatically exported.
`string key mandatory noNotification restricted`	`brmBackupSchedulerId` The value component of the RDN.
`uint32[0..1]`	`maxStoredScheduledBackups = 5` The maximum number of scheduled backups to store in the local ME. When this threshold is reached, the oldest scheduled backup is deleted by the BRM before creating a new one.
`string readOnly`	`mostRecentlyCreatedAutoBackup` The name of the scheduled backup created most recently by BrmBackupScheduler.
`DateTime[0..1] readOnly`	`nextScheduledTime = 2099-12-31T23:59:59` The date and time when the next scheduled event is triggered. This is the earliest scheduled event from the set of configured events, i.e. single, periodic, and calendar-based periodic events.
`BrmAsyncActionProgress[0..1] readOnly`	`progressReport` The structure used to report the progress and final result of asynchronous actions.
`string[0..1]`	`scheduledBackupName = BACKUP` The configurable portion of the scheduled backup name. The scheduled backups are named <scheduledBackupName>-<creation date and time>, where creation date and time is of type DateTime defined in the common library. Note: If date and time of creation (of the format DateTime) has '.' to denote the fraction of a second, it is rounded up and '.' is removed by BRM to maximize portability on the file system. Also, for the same reason, ":" is replaced by "-".
`OperState[0..1] readOnly`	`schedulerState` Operational state of the scheduler (ENABLED/DISABLED). If the scheduler configuration has been successfully done and the scheduler is administratively unlocked, the implementation sets this attribute to ENABLED to confirm that the scheduler has been successfully configured and the next event has been calculated. If the event(s) is scheduled for a limited period of time, at the end of the period when there is no more scheduled events, this attribute is set to DISABLED by the implementation.

class BrmBackupScheduler

class BrmCalendarBasedPeriodicEvent

ManagedElement

+-SystemFunctions

+-BrM

+-BrmBackupManager

+-BrmBackupScheduler

+-BrmCalendarBasedPeriodicEvent

Periodic backup event using calendar-based interval.

This construct can be used to configure a periodic scheduled backup event by specifying the desired interval using calendar. For instance, in order to configure a scheduled backup event to occur every night at 2:00 am, the following setup must be done:
time=02:00:00
The start time for calculating scheduled events is assumed to be the current system time by default, unless explicitly set using the startTime attribute. Furthermore, if the configured event is to stop at a specific date, stopTime attribute must be set accordingly. Note that the default value of stopTime is the end of century.
A scheduled backup event of this type is triggered only if ALL the conditions with regard to attribute values are satisfied. For example, if "dayOfWeek" is set to Monday and "dayOfMonth" is set to 1, the event will be triggered only if the first day of month is Monday.
Daylight saving adjustments in Spring and Fall are addressed such that the affected scheduled backup events are triggered exactly once.

Attributes
`string key mandatory noNotification restricted`	`brmCalendarBasedPeriodicEventId` The value component of the RDN.
`DayOfMonth`	`dayOfMonth = 0` Day of month.
`DayOfWeek`	`dayOfWeek = ALL` Day of week.
`DayOfWeekOccurrence`	`dayOfWeekOccurrence = ALL` The occurrence of the day of week specified by dayOfWeek attribute in the month.
`Month`	`month = 0` Month.
`DateTime[0..1]`	`startTime` Start time. It is an optional attribute. If not specified, the implementation uses the current system time as the default value.
`DateTime[0..1]`	`stopTime = 2099-12-31T23:59:59` Stop time. It is an optional attribute. The default value is the end of the century.
`Time mandatory`	`time` This is the time when the scheduled event must occur.

class BrmCalendarBasedPeriodicEvent

class BrmFailsafeBackup

ManagedElement

+-SystemFunctions

+-BrM

+-BrmBackupManager

+-BrmFailsafeBackup

MO for activating and deactivating failsafe backups.
Failsafe backups can be used when making changes to sensitive parts of the model, in which an error in configuration can lead to lost OAM connectivity or other failures from which the system can recover by a restore from a backup. When activated the failsafe backup function will automatically restore the system from a backup if the configuration as not been confirmed within a defined time period.

This MO is created by the system.

Actions
`string`	`activate ( );` Activates a failsafe backup, which is created when this action is invoked.
`string`	`deactivate ( );` Deactivates failsafe function and the failsafe backup is removed.

Attributes
`string[0..1] readOnly`	`backupName` Name of the backup that will be restored in case the failsafe function is activated.
`string key mandatory noNotification restricted`	`brmFailsafeBackupId` The value component of the RDN.
`BrmAsyncActionProgress[0..1] readOnly`	`progressReport` Represents the progress report and final result of creating backup for failsafe configuration. It will return the same information as the progressReport attribute of the BrmBackupManager managed object class.
`uint64[0..1]`	`timeoutLength = 1200 { 1..86400 }` The number of seconds the system waits before activating the failsafe function. If the value is set while the function is active the timeRemaining will be changed to that time instead. Unit: 1 seconds
`uint64[0..1] noNotification readOnly`	`timeRemaining` The number of seconds that remains before the system is restored from the selected backup.
`UsageState readOnly`	`usageState` Shows if the failsafe function is activated or not. Multiple failsafe points is not possible, therefore this state is either IDLE or BUSY.

class BrmFailsafeBackup

class BrmPeriodicEvent

ManagedElement

+-SystemFunctions

+-BrM

+-BrmBackupManager

+-BrmBackupScheduler

+-BrmPeriodicEvent

Periodic backup event.
This construct can be used to configure a periodic scheduled backup event by specifying the number of months, weeks, days, hours, or minutes. For instance, in order to configure a scheduled backup event to occur every 12 hours, the following setup must be done:

hours=12

The start time for calculating scheduled events is assumed to be the current system time by default, unless explicitly set using the startTime attribute. Furthermore, if the configured event is to stop at a specific date, stopTime attribute must be set accordingly. Note that the default value of stopTime is the end of century.

Attributes
`string key mandatory noNotification restricted`	`brmPeriodicEventId` The value component of the RDN.
`uint16`	`days = 0` The number of days.
`uint16 mandatory`	`hours` The number of hours.
`uint16`	`minutes = 0` The number of minutes.
`uint16`	`months = 0` Deprecated, The number of months. Replaced by CalendarBasedPeriodicEvent.month. Deprecated:
`DateTime[0..1]`	`startTime` Start time. It is an optional attribute. If not specified, the implementation uses the current system time as the default value.
`DateTime[0..1]`	`stopTime = 2099-12-31T23:59:59` Stop time. It is an optional attribute. The default value is the end of the century.
`uint16`	`weeks = 0` The number of weeks.

class BrmPeriodicEvent

class BrmRollbackAtRestore

ManagedElement

+-SystemFunctions

+-BrM

+-BrmRollbackAtRestore

Confirm a restore action or automatic rollback after an unconfirmed restore operation was executed.
The existence of an instance of this class indicates that this feature is supported by the implementation.
This is optional support.

This MO is created by the system.

Actions

ActionInvocationResult

confirmRestore ( );: Invoking this action indicates acceptance of the previously executed restore operation.
The restore supervision timer, counting down from the initial value indicated by the timeAllowedBeforeRollback attribute, is stopped when this action is invoked. If this action is not invoked before the supervision timer expires, the system is restored to the state it was in before the last restore operation was invoked. This is a synchronous action.

Attributes
`string key mandatory noNotification restricted`	`brmRollbackAtRestoreId` The value component of the RDN.
`uint16[0..1]`	`timeAllowedBeforeRollback = 3600` Number of seconds to wait before performing the rollback to the state before restore.
`uint16[0..1] readOnly`	`timeRemainingBeforeRollback` The remaining number of seconds before performing the rollback to the state before restore. The countdown stops after confirmRestore action is invoked on the BrmBackup MO, representing the restored backup. If action confirmRestore is not invoked before the expiration of the rollback timer, an automatic rollback is triggered. Countdown starts at restore, and stops when confirmRestore() is invoked.

class BrmRollbackAtRestore

class BrmSingleEvent

ManagedElement

+-SystemFunctions

+-BrM

+-BrmBackupManager

+-BrmBackupScheduler

+-BrmSingleEvent

A single scheduled backup event.

This construct can be used to configure a single (one-shot) scheduled backup event by specifying the desired date and time.

Attributes
`string key mandatory noNotification restricted`	`brmSingleEventId` The value component of the RDN.
`DateTime mandatory`	`scheduledTime` Scheduled time.

class BrmSingleEvent

class BusinessEvents

ManagedElement

+-PolicyControlFunction

+-BusinessEvents

Holds the SAPC logging events configuration data.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`businessEventsId` Identifies the instance of this class. Forced value=1.
`int32 noNotification`	`loggingLevel = 6` Indicates the system logging level. Values: 0: EMERGENCY 1: ALERT 2: CRITICAL 3: ERROR 4: WARNING 5: NOTICE 6: INFORMATIONAL

class BusinessEvents

class CapacityKey

ManagedElement

+-SystemFunctions

+-Lm

+-CapacityKey

Key of a licensed capacity that is available for the Managed Element.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`capacityKeyId` The value component of the RDN.
`string readOnly`	`capacityUnit` The licensed capacity measuring unit.
`DateTime[0..1] readOnly`	`expiration` The key expiry date and time. For perpetual keys, the value is NULL.
`int32 readOnly`	`grantedCapacityLevel` The capacity level currently granted by the License Manager. The attribute value is based on requests and releases of capacity units made by License Users. If such requests and releases are not made by License Users, the value of the attribute defaults to the licensed capacity limit. Note: The value of the attribute is not based on Performance Management data.
`string[0..1] readOnly`	`keyId` Identity of the feature under license control. E.g., CXC4011234, FAT1021234
`LmCapacityValue readOnly`	`licensedCapacityLimit` Licensed capacity limit as defined in the installed key file. For LM deployments that connect to Arwa, the licensed capacity limit is defined in the Arwa License Server. For LM deployments that connect to NeLS, the licensed capacity limit is the capacity limit value granted by NeLS.
`boolean readOnly`	`licensedCapacityLimitReached` Indicates whether or not current capacity usage reaches the licensed capacity limit. Note: This attribute is not applicable for LM deployments that connect to NeLS.
`string readOnly`	`name` The name of the feature represented by the key.
`string[0..1] readOnly`	`productType` Identifier of the type of product to which the capacity is related. This attribute is used only in systems where the different applications use separate key files to identify which application or product the capacity belongs to, e.g. “SASN”, “GSN_GGSN”, “SSR 8000”.
`boolean[0..1] readOnly`	`shared = false` Indicates whether the key is shared among Managed Elements or dedicated to the Managed Element. A key is dedicated to the Managed Element if the key can be used only by the Managed Element. This is always the case when the ELIM format is used. A key can be shared among multiple Managed Elements if it is installed on a License Server to which multiple Managed Elements connect.
`DateTime readOnly`	`validFrom` The date and time from which the key is valid.
`string[0..1] readOnly`	`version` Version of licensed feature.

class CapacityKey

class CertM

ManagedElement

+-SystemFunctions

+-SecM

+-CertM

+-CertMCapabilities [1..1]

+-EnrollmentAuthority [0..]

+-EnrollmentServerGroup [0..]

+-NodeCredential [0..]

+-TrustCategory [0..]

+-TrustedCertificate [0..]

The top class of the Certificate Management model.

Certificate management encompasses management of node credentials and trusted certificates.

This MO is created by the system.

References to:: TrustedCertificate;

Actions
`boolean`	`cancel ( );` Cancels an ongoing action on this MO. Can be invoked during execution of an action.
`boolean`	`installTrustedCertFromUri ( string uri , EcimPasswordString uriPassword , Fingerprint fingerprint );` Installs a trusted certificate from the specified Uniform Resource Identifier (URI). The action can be invoked if no other action in progress on this MO. The action returns immediately after invocation. The progress of the action can be tracked via the reportProgress attribute. The action returns with TRUE after successful invocation, otherwise it returns with FALSE. The generic URI syntax is defined by RFC 3986. Example: sftp://myuser@myhostname.ericsson.local/dir/subdir/certificate Example: http://myhostname.ericsson.local/dir/subdir/certificate Parameters Name: uri Description: This parameter contains a URI assumed to point to the certificate file. The generic URI syntax is defined by RFC 3986. Example: sftp://myuser@myhostname.ericsson.local/dir/subdir/certificate The URI must not contain any password. The password shall be provided in the second parameter of this action. The URI may be local relative (e.g. data/dir/subdir/file), or local absolute (e.g. file:///data/dir/subdir/file), or remote (e.g. sftp://user@hostname/dir/subdir/file) or remote relative (e.g. sftp://user@hostname/~/cert.pem). If the URI is local relative, the file is expected to be under the directory path indicated by the localFileStorePath attribute in the CertM MO. Name: uriPassword Description: The password section of the URI. If a password is not required, the 'NULL' string must be provided. Name: fingerprint Description: The Secure Hash Algorithm (SHA) fingerprint of the certificate to be installed. The fingerprint is checked against the fingerprint calculated on the installed file. If fingerprint verification is not required, the 'NULL' string has to be provided. The hash must be calculated by the SHA algorithm indicated in fingerprintSupport of the CertMCapabilities MO.
`boolean`	`removeTrustedCert ( TrustedCertificate trustedCert );` Removes a trusted certificate. Parameters Name: trustedCert Description: The DN of the TrustedCertificate MO to be removed.

Attributes
`string key mandatory noNotification restricted`	`certMId` The value component of the RDN.
`string[0..1] readOnly`	`localFileStorePath` Contains a file sytem path for locally stored certificates. The default directory path on the ME file system where certificates or credential containers are stored. It may store locally generated files or files generated after push download.
`AsyncActionProgress[0..1] readOnly`	`reportProgress` Reports the progress of the ongoing action on this MO.
`string[0..1]`	`userLabel` An additional descriptive text.

class CertM

class CertMCapabilities

ManagedElement

+-SystemFunctions

+-SecM

+-CertM

+-CertMCapabilities

Contains the certificate management capabilities of the ME.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`certMCapabilitiesId` The value component of the RDN.
`EnrollmentSupport[1..] nonUnique noNotification readOnly`	`enrollmentSupport` Indicates the enrollment methods supported by the ME.
`FingerprintSupport[0..1] noNotification readOnly`	`fingerprintSupport` The secure hash algorithm the ME supports for fingerprint calculation. The attributes and parameters in the CertM model taking a fingerprint must be provided by calculating the fingerprint using the indicated algorithm.

class CertMCapabilities

class ClientAddress

NetsharedConfig

+-PeerCluster

+-Connection

+-ClientAddress

The local address and port the update channel binds to.

Attributes
`string key mandatory noNotification restricted`	`dbsClientAddressId` Unique id.
`string mandatory noNotification`	`host` Host address.
`uint16 mandatory noNotification`	`port` Host port.

class ClientAddress

class CliSsh

ManagedElement

+-SystemFunctions

+-SysM

+-CliSsh

Represents the CLI configuration management service over Secure Shell.

This MO is created by the system.

Attributes
`BasicAdmState mandatory`	`administrativeState` The administrative state for the CLI target. When LOCKED all on-going CLI connections will immediately be terminated. NOTE: Setting the administrativState to LOCKED for all Netconf and CLI interfaces disables O&M access to the ME. Refer to product specific troubleshooting instructions to resolve such a scenario.
`string key mandatory noNotification restricted`	`cliSshId` The value component of the RDN.

class CliSsh

class CliTls

ManagedElement

+-SystemFunctions

+-SysM

+-CliTls

Represents the CLI configuration management service over Transport Layer Security (TLS).

This MO is created by the system.

References to:: ManagedObject;

Attributes
`BasicAdmState mandatory`	`administrativeState` The administrative state for the CLI target. When LOCKED all on-going cli connections will immediately be terminated. NOTE: Setting the administrativState to LOCKED for all Netconf and CLI interfaces disables O&M access to the ME. Refer to product specific troubleshooting instructions to resolve such a scenario.
`string key mandatory noNotification restricted`	`cliTlsId` The value component of the RDN.
`ManagedObject[0..1]`	`nodeCredential` The credential used for the CLI service. Specifies the DN of a NodeCredential MO in Certificate Management.
`ManagedObject[0..1]`	`trustCategory` The set of certificates trusted by the CLI service. Specifies the DN of a TrustCategory MO in Certificate Management.

class CliTls

class ComputeResource

ManagedElement

+-Equipment

+-ComputeResource

Represents a compute resource (virtual or physical) that is allocated to the managed element.
This resource can be a piece of hardware or a VM provided by a virtualization infrastructure management system.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`computeResourceId` The value part of the RDN.
`string[1..] noNotification readOnly`	`macAddress` The MAC address(es) of the resource.
`string[0..1] noNotification readOnly`	`uuid` Universally unique identifier of the resource.

class ComputeResource

class ComputeResourceRole

ManagedElement

+-SystemFunctions

+-SysM

+-CrM

+-ComputeResourceRole

Represents the service (defined by the role) provided by the compute resource.
Logically, an instance of this class represents the state of the software stack (operating system, middleware, and application) running on the compute resource.

This MO is created by the system.

References to:: ManagedObject;

Attributes
`AdmState[0..1]`	`adminState` Administrative state of compute resource role. Can be used to to temporarily stop services provided by the compute resource in a graceful fashion (e.g. for HW maintenance, etc.) While in LOCKED state, no services is provided until set to UNLOCKED.
`string key mandatory noNotification restricted`	`computeResourceRoleId` The value component of the RDN.
`InstantiationState[0..1] readOnly`	`instantiationState` Instantiation state of the compute resource role.
`OperState[0..1] readOnly`	`operationalState` Operational state of the compute resource role.
`ManagedObject[0..1]`	`provides` Reference to an instance of Role MO. This determines what role (which dictates what type of service) is provided by the compute resource. The role is identified by the Distinguished Name of the Role MO.
`ManagedObject[0..1] readOnly`	`uses` Reference to the compute resource which is used by this MO. The compute resource is identified by the Distinguished Name of the ComputeResource MO.

class ComputeResourceRole

class Config

Config

+-GeneralConf [1..1]

+-NtpServerConf [1..]

Attributes
`string key mandatory noNotification restricted`	`ldeConfigId`

class Config

class Connection

NetsharedConfig

+-PeerCluster

+-Connection

+-ClientAddress [0..1]

+-PeerAddress [1..1]

Represents a connection to the peer cluster.

Attributes
`uint32 mandatory`	`connectTimeout` The time DBS waits between connection attempts.
`string key mandatory noNotification restricted`	`dbsNetsharedConnectionId` Unique id of the Connection.
`uint32 mandatory`	`retryLimit` The number of times DBS tries to connect before declaring the peer unreachable.

class Connection

class CrM

ManagedElement

+-SystemFunctions

+-SysM

+-CrM

+-ComputeResourceRole [0..]

+-Role [0..]

The root class

This MO is created by the system.

Attributes
`AutoRoleAssignment[0..1]`	`autoRoleAssignment` Shows whether a role, if one exists, should be automatically assigned to newly detected compute resrouce(s).
`string key mandatory noNotification restricted`	`crMId` The value component of the RDN.

class CrM

class CustomRole

ManagedElement

+-SystemFunctions

+-SecM

+-UserManagement

+-LocalAuthorizationMethod

+-CustomRole

Authorization roles defined by the MS that may be assigned to users.

CustomRole MO instances are associated to CustomRule MO instances, which define the access controls to objects.

References from:: CustomRule;
References to:: CustomRule;

Attributes
`string key mandatory noNotification restricted`	`customRoleId` The value component of the RDN.
`string mandatory restricted`	`roleName` The role name a user may have. The name must match a role name retrieved from the user information store.
`CustomRule[1..] nonUnique mandatory`	`rules` The rules of the role created by the MS. Contains the Distinguished Names of CustomRule MO instances.
`string[0..1]`	`userLabel` An additional descriptive text.

class CustomRole

class CustomRule

ManagedElement

+-SystemFunctions

+-SecM

+-UserManagement

+-LocalAuthorizationMethod

+-CustomRule

The rules created by the MS that define the access control to objects.

The CustomRule MO instances are associated with CustomRole MO instances, which may be then applied to users.

References from:: CustomRole;
References to:: CustomRole;

Attributes
`string key mandatory noNotification restricted`	`customRuleId` The value component of the RDN.
`PermissionType mandatory`	`permission` Permission is the access right the rule provides on a target specified by the ruleData attribute.
`CustomRole[0..] nonUnique noNotification readOnly`	`reservedByRoles` The roles to which this rule is associated. Indicates the Distinguished Names of CustomRole MO instances that refer to this CustomRule MO.
`RuleDataType mandatory`	`ruleData` Defines the model elements for which the permission is applicable.
`string[0..1]`	`ruleName` The rule name.
`string[0..1]`	`userLabel` An additional descriptive text.

class CustomRule

class DateAndTime

ManagedElement

+-SystemFunctions

+-SysM

+-TimeM

+-DateAndTime

Local time and time zone values.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`dateAndTimeId` The value component of the RDN.
`DifferenceFromUTC[0..1] readOnly`	`dateTimeOffset` The offset in hours and minutes from UTC to local time.
`DateTime[0..1] noNotification readOnly`	`localDateTime` The local date and time of the ME. Local time is standard time in a time zone at a fixed offset from Coordinated Universal Time (UTC), possibly adjusted by Daylight Saving Time (DST) during part of the year.
`string[0..1]`	`timeZone` The time zone of the ME. A time zone is a region that has a uniform standard time. The string must match an entry in the ME’s time zone database, for example ‘Europe/Stockholm’.
`string[0..1] readOnly`	`tzRevision` The revision of the time zone database stored on the ME.

class DateAndTime

class DbsFmRoot

DbsFmRoot

Attributes
`string key mandatory noNotification restricted`	`dbsFmRootId` .

class DbsFmRoot

class DiameterNode

ManagedElement

+-PolicyControlFunction

+-Network

+-DiameterNodes

+-DiameterNode

It represents a Diameter node that communicates with the SAPC.

Attributes
`boolean[0..1]`	`adcSupport = false` Indicates if the Diameter node supports ADC Rules.
`string[0..1] noNotification restricted`	`clusterPattern` Cluster pattern. For clustered systems (logical system composed of several different Origin-Host), the pattern to match with the received Origin-Host. The pattern can include any number of wildcards (example: realm.com). If no wildcard is specified the pattern matches with the ending part of the received Origin-Host (example: pcefrealm.com).
`PccControl[1..] mandatory noNotification`	`controls` The list of applicable controls for the Diameter node.
`string key mandatory noNotification restricted`	`diameterNodeId` The Diameter Origin-Host received from the Diameter node. For clustered systems, the logical cluster identity to consider several Origin-Host as a single Diameter node in the SAPC.
`boolean[0..1] noNotification`	`dynamicServiceSupport = false` Indicates if the Diameter node supports preconfigured and dynamic Pcc Rules.
`string[0..1]`	`ipDomainId` IP address domain identity, assistant to match with the value of IP-Domain-Id AVP.

class DiameterNode

class DiameterNodes

ManagedElement

+-PolicyControlFunction

+-Network

+-DiameterNodes

+-DiameterNode [0..]

Container for DIAMETER network related configuration classes.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`diameterNodesId` Identifies the instance of this class. Forced value = 1.

class DiameterNodes

class EDSource

ManagedElement

+-PolicyControlFunction

+-EntityData

+-EDSources

+-EDSource

Contains the definition and location of a data object used for the SAPC business logic.

Attributes
`EcimPassword[0..1] noNotification`	`dbPassword` Password used by the Entity Data Source to connect to a given external DB.
`string mandatory noNotification`	`definition` Metadata to specify from where and how access the data.
`string key mandatory noNotification restricted`	`eDSourceId` Identifies the instance of this class.

class EDSource

class EDSources

ManagedElement

+-PolicyControlFunction

+-EntityData

+-EDSources

+-EDSource [0..]

Serves as repository of EDSource instances.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`eDSourcesId` Identifies the instance of this class. Forced value = 1.

class EDSources

class EDTarget

ManagedElement

+-PolicyControlFunction

+-EntityData

+-EDTargets

+-EDTarget

Allows to extend the SAPC behaviour to take actions and produce output data.

Attributes
`string mandatory noNotification`	`definition` Specifies the action to perform and their output data.
`string key mandatory noNotification restricted`	`eDTargetId` Identifies the instance of this class.
`EcimPassword[0..1] noNotification`	`targetPassword` Password used if the destination of the output data requires it.

class EDTarget

class EDTargets

ManagedElement

+-PolicyControlFunction

+-EntityData

+-EDTargets

+-EDTarget [0..]

Serves as container of EDTarget instances.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`eDTargetsId` Identifies the instance of this class. Forced value = 1.

class EDTargets

class EmergencyUnlock

ManagedElement

+-SystemFunctions

+-Lm

+-EmergencyUnlock

Emergency Unlock state information.

This MO is created by the system.

Actions
`boolean`	`activate ( );` Initiates activation of the Emergency Unlock operational mode. Return value is true if the activation succeeded, otherwise false.
`boolean`	`deactivate ( );` Initiates the deactivation of the Emergency Unlock operational mode. Return value is true in case the deactivation succeeded, false otherwise.

Attributes
`uint8 readOnly`	`activationsLeft` Remaining allowed Emergency Unlock activations left.
`LmActivationState readOnly`	`activationState` Activation state of Emergency Unlock.
`string key mandatory noNotification restricted`	`emergencyUnlockId` The value component of the RDN.
`DateTime[0..1] readOnly`	`expiration` Expiry date and time of Emergency Unlock. The value is NULL if the activation state is INACTIVE.

class EmergencyUnlock

class EnrollmentAuthority

ManagedElement

+-SystemFunctions

+-SecM

+-CertM

+-EnrollmentAuthority

Represents a Certification or Registration Authority for certificate enrollment.

References from:: EnrollmentServer; NodeCredential;
References to:: TrustedCertificate;

Attributes
`AuthorityType[0..1]`	`authorityType` Indicates the type of the enrollment authority. Used for the verification of the Public Key Infrastructure (PKI) response message. In case of a Certification Authority (CA), the self-signed certificate of the CA is accepted by ME given that the certificate is configured either in attribute enrollmentCaCertificate or enrollmentCaFingerprint. In case of a Registration Authority (RA), the RA certificate is verified using the CA certificate of the RA configured in attribute enrollmentCaCertificate. This entity is deprecated as implemented redundant functionality. Deprecated: Deprecated in version 2.0. Redundant functionality.
`string key mandatory noNotification restricted`	`enrollmentAuthorityId` The value component of the RDN.
`DistinguishedName[0..1]`	`enrollmentAuthorityName` Specifies the name of the issuing CA. The X.501 distinguished name of the issuing CA used for addressing and reference identity.
`TrustedCertificate[0..1]`	`enrollmentCaCertificate` The trusted cerificate of the RA or CA used for enrollment authentication. Represents the certificate by the DN of the appropriate TrustedCertificate MO. The RA or CA certificate provided in the PKI response is authenticated by this trusted certificate.
`string[0..1]`	`userLabel` An additional descriptive text.

class EnrollmentAuthority

class EnrollmentServer

ManagedElement

+-SystemFunctions

+-SecM

+-CertM

+-EnrollmentServerGroup

+-EnrollmentServer

Represents an enrollment server.

An enrollment server implements Simple Certificate Enrollment Protocol (SCEP) or the Certificate Management Protocol (CMP).

References to:: EnrollmentAuthority;

Attributes
`EnrollmentAuthority[0..1]`	`enrollmentAuthority` The Certification Authority or Registration Authority used by this enrollment server. Represents the enrollment authority by the DN of the EnrollmentAuthority MO. This entity is deprecated. If this attribute is specified, the enrollmentAuthority attribute in the NodeCredential MO referring to the EnrollmentServerGroup MO of this EnrollmentServer MO is ignored. Deprecated: Deprecated in version 2.0. Function replaced by enrollmentAuthority attribute in NodeCredential MOC.
`string key mandatory noNotification restricted`	`enrollmentServerId` The value component of the RDN.
`EnrollmentProtocol mandatory`	`protocol` The enrollment protocol.
`string mandatory`	`uri` The URI of the enrollment server. The URI consists of a protocol, an IP or DNS address and an optional port number. Specify the optional port designation by appending a colon followed by the port number to the host part, for example, 192.168.33.27:8080. If no port number is provided, the default port is used. Example for CMP: http://192.168.33.27:8080 or cmp://192.168.33.27
`string[0..1]`	`userLabel` An additional descriptive text.

class EnrollmentServer

class EnrollmentServerGroup

ManagedElement

+-SystemFunctions

+-SecM

+-CertM

+-EnrollmentServerGroup

+-EnrollmentServer [0..]

Maintains a group of enrollment servers for load balancing.

References from:: NodeCredential;

Attributes
`string key mandatory noNotification restricted`	`enrollmentServerGroupId` The value component of the RDN.
`string[0..1]`	`userLabel` An additional descriptive text.

class EnrollmentServerGroup

class EntityData

ManagedElement

+-PolicyControlFunction

+-EntityData

+-EDSources [1..1]

+-EDTargets [1..1]

+-NotifObjects [1..1]

Serves as container for Entity Data related configuration data.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`entityDataId` Identifies the instance of this class.
`IpDNSAddress[0..1] noNotification`	`localIp` Indicates the local IP address used for external database access.

class EntityData

class Equipment

ManagedElement

+-Equipment

+-ComputeResource [0..]

This is the Equipment MO.

Attributes
`string key mandatory noNotification restricted`	`equipmentId` Unique identifier for this object instance.
`string[0..1]`	`userLabel` User friendly name for equipment object.

class Equipment

class FeatureKey

ManagedElement

+-SystemFunctions

+-Lm

+-FeatureKey

Key of a licensed feature that is available for the Managed Element.

This MO is created by the system.

Attributes
`DateTime[0..1] readOnly`	`expiration` The key expiry date and time. For perpetual keys, the value is NULL.
`string key mandatory noNotification restricted`	`featureKeyId` The value component of the RDN.
`boolean readOnly`	`granted` Indicates whether or not the licensed feature has been granted by the License Manager.
`string[0..1] readOnly`	`keyId` Identity of the feature under license control. E.g., CXC4011234, FAT1021234
`string readOnly`	`name` The name of the feature represented by the key.
`string[0..1] readOnly`	`productType` Identifier of the type of product to which the capacity is related. This attribute is used only in systems where the different applications use separate key files to identify which application or product the capacity belongs to, e.g. “SASN”, “GSN_GGSN”, “SSR 8000”.
`boolean[0..1] readOnly`	`shared = false` Indicates whether the key is shared among Managed Elements or dedicated to the Managed Element. A key is dedicated to the Managed Element if the key can be used only by the Managed Element. This is always the case when the ELIM format is used. A key can be shared among multiple Managed Elements if it is installed on a License Server to which multiple Managed Elements connect.
`DateTime readOnly`	`validFrom` The date and time from which the key is valid.
`string[0..1] readOnly`	`version` Version of licensed feature.

class FeatureKey

class FileGroup

ManagedElement

+-SystemFunctions

+-FileM

+-LogicalFs

+-FileGroup

+-FileGroup [0..]

+-FileInformation [0..]

..

+-FileGroup

+-FileGroup

+-FileGroup [0..]

+-FileInformation [0..]

A set of files that are logically related and possible to manage by a common policy.
To allow a tree-structured hierarchical representation of groups of files, the FileGroup class has an association to itself. Over the northbound interface of the managed element, the instances of classes LogicalFs and FileGroup represent a file system.

References from:: FileGroupPolicy;
References to:: ManagedObject;

Actions

boolean

removeFile ( string file );: Removes a named file from this file group.
The file name can contain a regular expression and thus a set of files in the file group that match the expression can be removed. The regular expression is interpreted according to POSIX pattern definition used for file name expansion. Action removeFile() returns True when the files are removed, otherwise False.; Parameters

Name: file
Description: This parameter specifies the file in the FileGroup to be removed.
The file string is interpreted as a regular expression and all files that match the expression are removed.

Attributes
`string key mandatory noNotification restricted`	`fileGroupId` Value component of the RDN.
`FileInfo[0..] readOnly`	`files` Container with information about the files under this file group.
`boolean noNotification readOnly`	`internalHousekeeping` If true, the files in this file group are maintained by the system. User-defined housekeeping policies associated with this file group are excluded.
`ManagedObject[0..1] noNotification readOnly`	`reservedByPolicy` Indicates the DN of the FileGroupPolicy MO and sets the file group housekeeping policy.

class FileGroup

class FileGroupPolicy

ManagedElement

+-SystemFunctions

+-FileM

+-FileGroupPolicy

+-ThresholdMonitoring [0..8]

FileGroupPolicy defines housekeeping rules for file groups.
FileGroups already maintained by the system, as indicated by internalHousekeeping, are excluded from FileM housekeeping.

References to:: FileGroup;

Attributes
`FileGroup[0..] nonUnique`	`fileGroup` A reference to one or more file groups to which the defined housekeeping policy applies.
`string key mandatory noNotification restricted`	`fileGroupPolicyId` Value component of the RDN.
`FullAction[0..1]`	`fullFileGroupAction = DISCARD_OLDEST` Defines the action taken by the housekeeping logic when a limit is reached. Two limits can be defined by attributes maxFileGroupSize or maxNumberFiles. No limits are considered on maxFileGroupSize or maxNumberFiles if the action to take is unset. Possible values are: -DISCARD_NEWEST: The system does not allow a new file to be stored if that causes the limit to be exceeded. -DISCARD_OLDEST: If the limit is exceeded by storing a new file, the oldest files in the group are deleted before storing the new file.
`int32`	`maxFileGroupSize = 0` Defines the maximum size of each tree of file groups related to this FileGroupPolicy. 0 indicates that no limit is set. The unit is kilobyte. If the tree of file groups referenced by this policy includes a tree of file groups with its own policy, these file groups are excluded when the number of files for this policy are calculated.
`int32`	`maxNumberFiles = 0` Defines the maximum number of files of each tree of file groups related to this FileGroupPolicy. 0 indicates that no limit is set. If the tree of file groups referenced by this policy includes a tree of file groups with its own policy, these file groups are excluded when the number of files for this policy are calculated.
`int32`	`retentionTime = 0` Indicates for how long the files in this group are kept before being automatically deleted. The unit is minutes. 0 indicates that the files are kept for ever.
`string[0..1]`	`userLabel` Label for free use.

class FileGroupPolicy

class FileInformation

..

+-FileGroup

+-FileInformation

An instance of FileInformation represents a file.

This MO is created by the system.

Deprecated:

Attributes
`string key mandatory noNotification restricted`	`fileInformationId` Value component of the RDN. Deprecated:
`DateTimeWithoutOffset[0..1] noNotification readOnly`	`modificationTime` Date and time of latest modification. Deprecated:
`int64[0..1] noNotification readOnly`	`size` The size of the file in kilobyte. Deprecated:
`string[0..1] noNotification readOnly`	`type` The type of the file. The type specifies how the content of the file is structured and shall follow common practice. For example, "xml" indicates that the content of the file is structured according to the eXtensible Markup Language. Deprecated:

class FileInformation

class FileM

ManagedElement

+-SystemFunctions

+-FileM

+-FileGroupPolicy [0..]

+-LogicalFs [1..1]

The top class of the the FileM model.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`fileMId` Value component of the RDN.
`string[0..1]`	`userLabel` Label for free use.

class FileM

class FileMConfigData

ManagedElement

+-SystemFunctions

+-FileM

+-LogicalFs

+-FileMConfigData

Hidden MOC for fileM configuration

This MO is created by the system.

Filter: filemData

Attributes
`string key mandatory noNotification restricted`	`fileMConfigDataId` The value component of the RDN. Filter: filemData
`string noNotification readOnly`	`internalRoot` Internal root for File Management Filter: filemData

class FileMConfigData

class FlexibleDiameter

ManagedElement

+-PolicyControlFunction

+-FlexibleDiameter

+-AVP [0..]

Container to configure AVPs used in Diameter flexible transformations.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`flexibleDiameterId` Identifies the instance of this class. Forced value = 1.

class FlexibleDiameter

class Fm

ManagedElement

+-SystemFunctions

+-Fm

+-FmAlarm [0..]

+-FmAlarmModel [0..]

The root MOC of the Fault Management branch.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`fmId` Holds the name used when identifying the MO.
`uint32[0..1]`	`heartbeatInterval = 60` The interval in seconds, with which a heartbeat notification is sent to all alarm consumers.
`DateTime[0..1] noNotification readOnly`	`lastChanged` The timestamp of when any alarm was last changed. With this attribute, an external system can determine if a resynchronization operation is needed, such as following a loss and restore of a communications link.
`uint64[0..1] noNotification readOnly`	`lastSequenceNo` The last used sequence number for an alarm state change notification. The sequence numbers are consecutive. With this attribute, an external system can determine if a resynchronization operation is needed, such as following a loss and restore of a communications link.
`uint32[0..1] noNotification readOnly`	`sumCritical` Shows the number of active alarms with perceived severity 'critical'.
`uint32[0..1] noNotification readOnly`	`sumMajor` Shows the number of active alarms with perceived severity ‘major’.
`uint32[0..1] noNotification readOnly`	`sumMinor` Shows the number of active alarms with perceived severity ‘minor’.
`uint32[0..1] noNotification readOnly`	`sumWarning` Shows the number of active alarms with perceived severity ‘warning’.
`uint32[0..1] noNotification readOnly`	`totalActive` Shows the total number of currently active alarms. This corresponds to the the total number of instantiated FmAlarm objects.

class Fm

class FmAlarm

ManagedElement

+-SystemFunctions

+-Fm

+-FmAlarm

An FmAlarm instance represents an active alarm.
An alarm is a persistent indication of a fault that clears only when the triggering condition has been resolved.

This MO is created by the system.

Attributes
`SeverityLevel[0..1] noNotification readOnly`	`activeSeverity` The perceived severity of the alarm. It may change during the alarm's lifetime. Specification: RFC3877
`AdditionalInformation[0..] noNotification readOnly`	`additionalInfo` Further information about the problem. The information is represented as a set of data structures with two items of information, an identifier and a value. It may change during the alarm's lifetime.
`string[0..1] noNotification readOnly`	`additionalText` Extra information about the alarm. It may change during the alarm's lifetime.
`EventType[0..1] noNotification readOnly`	`eventType` General category for the alarm. Specification: ITU-T X.733 X.736
`string key mandatory noNotification restricted`	`fmAlarmId` Holds the name used when identifying the MO.
`DateTime[0..1] noNotification readOnly`	`lastEventTime` The timestamp of when the alarm was last updated. This is set at alarm information change or severity change.
`uint32[0..1] noNotification readOnly`	`majorType` The attributes majorType and minorType are the two key attributes used to identify the alarm type.
`uint32[0..1] noNotification readOnly`	`minorType` The attributes majorType and minorType are the two key attributes used to identify the alarm type.
`string[0..1] noNotification readOnly`	`originalAdditionalText` The additional text set when the alarm was raised. This attribute is set when the alarm is raised and will not change during the alarm's lifetime.
`DateTime[0..1] noNotification readOnly`	`originalEventTime` The timestamp when the alarm was raised. This attribute is set when the alarm is raised and will not change during the alarm's lifetime.
`SeverityLevel[0..1] noNotification readOnly`	`originalSeverity` The perceived severity set when the alarm was raised. It will not change during the alarm's lifetime. Specification: RFC3877
`ProbableCause[0..1] noNotification readOnly`	`probableCause` Qualifies and provides further information on the reason for the event. A standard set of probableCause values is provided in the ERICSSON-ALARM-PC-MIB.
`int64[0..1] noNotification readOnly`	`sequenceNumber` A unique identity for every notification sent. This identity changes at every notification, that is, severity change and information change. It is not the same as the fmAlarmId as multiple notifications may be sent for one alarm instance.
`string[0..1] noNotification readOnly`	`source` The distinguished name of the alarming object.
`string[0..1] noNotification readOnly`	`specificProblem` Provides further refinement to the information given by probableCause. Can be used to find an associated operating instruction (OPI).

class FmAlarm

class FmAlarmModel

ManagedElement

+-SystemFunctions

+-Fm

+-FmAlarmModel

+-FmAlarmType [0..]

This is a container for grouping FM alarm types.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`fmAlarmModelId` Holds the name used when identifying the MO.

class FmAlarmModel

class FmAlarmType

ManagedElement

+-SystemFunctions

+-Fm

+-FmAlarmModel

+-FmAlarmType

A specific kind of alarm that can be reported, for example "power failure".
In an X.733 context it maps to event type, probable cause, and specific problem. The same principle is used for alert types as for alarm types.

This MO is created by the system.

References from:: MeasurementType;

Attributes
`string[0..1] noNotification readOnly`	`additionalText` Extra information that would not be contained by other FmAlarmType attributes.
`SeverityLevel[0..1]`	`configuredSeverity` Gives the possibility to configure the perceived severity for all alarms of this type. If set, this value overrides the perceived severity provided by the alarming object. Setting this attribute has no impact on existing alarms, only new and updated ones. Specification: RFC3877
`SeverityLevel[0..1] noNotification readOnly`	`defaultSeverity` The default perceived severity for all alarms of this type. Not set means alarms of this type can be assigned different severities. Specification: RFC3877
`EventType[0..1] noNotification readOnly`	`eventType` General category for the alarm type. Specification: ITU-T X.733, X.736
`string key mandatory noNotification restricted`	`fmAlarmTypeId` Holds the name used when identifying the MO.
`boolean[0..1] noNotification readOnly`	`isStateful` True indicates alarm. False indicates alert (stateless alarm).
`uint32[0..1] noNotification readOnly`	`majorType` The attributes majorType and minorType are the two key attributes used to identify the alarm type.
`uint32[0..1] noNotification readOnly`	`minorType` The attributes majorType and minorType are the two key attributes used to identify the alarm type.
`string[0..1] noNotification readOnly`	`moClasses` A list of the Managed Object classes that can raise this alarm type. This attribute contains a comma seperated list of Managed Object classes types that use this alarm type. It is for information only. Deprecated: This attribute has no purpose and is not used by anyone.
`ProbableCause[0..1] noNotification readOnly`	`probableCause` Qualifies and provides further information on the reason for the event. A standard set of probableCause values is provided in the ERICSSON-ALARM-PC-MIB. Specification: ITU-T M.3100, X.733, X.736; ETSI GSM 12.11.
`string[0..1] noNotification readOnly`	`specificProblem` Provides further refinement to the information given by probableCause. Can be used to find an associated operating instruction (OPI).

class FmAlarmType

class GeneralConf

Config

+-GeneralConf

Attributes
`string key mandatory noNotification restricted`	`generalConfId`
`string[0..1]`	`timeZone`

class GeneralConf

class GeoRedManager

ManagedElement

+-PolicyControlFunction

+-GeoRedManager

Holds the SAPC geographical redundancy configuration data.

This MO is created by the system.

Actions
`string`	`giveback ( );` Sets local node as active node. It has to be executed in preferred node.
`string`	`setConfig ( boolean preferred );` Set preferred cluster in a Geored environment. Parameters Name: preferred Description: preferred = [true \| false].
`string`	`showConfiguration ( );` Shows configuration parameters related to Geored.
`string`	`start ( string state );` Starts the replication in the SAPC. State parameter indicates if replication is initiated as active or standby. Parameters Name: state Description: state values = [active\|standby].
`string`	`stop ( );` Stops the replication in the SAPC.

Attributes
`GeoRedState[0..1] noNotification readOnly`	`currentState` Indicates the current status of the local node in a geographical redundancy deployment.
`string key mandatory noNotification restricted`	`geoRedManagerId` Identifies the instance of this class. Forced value = 1.
`string[0..1]`	`lastOperationDetailedInfo` Detailed information about last executed operation.
`GeoRedAction[0..1]`	`lastOperationExecuted` Indicates the last action executed.
`GeoRedActionStatus[0..1]`	`lastOperationStatus` Indicates the status of the last action executed.
`DateTime[0..1] noNotification readOnly`	`lastTransitionState` Indicates the timestamp of the last transition between states.
`GeoRedState[0..1] noNotification readOnly`	`previousState` Indicates the previous status of the local node in a geographical redundancy deployment.

class GeoRedManager

class IntegrationUnlock

ManagedElement

+-SystemFunctions

+-Lm

+-IntegrationUnlock

Integration Unlock state information.

This MO is created by the system.

Attributes
`uint8 readOnly`	`activationsLeft` Remaining allowed Integration Unlock activations left.
`LmActivationState readOnly`	`activationState` Activation state of Integration Unlock.
`DateTime[0..1] readOnly`	`expiration` Expiry date and time of Integration Unlock. The value is NULL if the activation state is INACTIVE.
`string key mandatory noNotification restricted`	`integrationUnlockId` The value component of the RDN.

class IntegrationUnlock

class KeyFileInformation

ManagedElement

+-SystemFunctions

+-Lm

+-KeyFileManagement

+-KeyFileInformation

Basic information about the key file installed on the Managed Element.

This MO is not applicable to LM deployments that connect to Arwa.

This MO is created by the system.

Attributes
`DateTime readOnly`	`installationTime` Date and time when key file was installed on the Managed Element.
`string key mandatory noNotification restricted`	`keyFileInformationId` The value component of the RDN.
`boolean readOnly`	`locatable` Indicates whether or not the key file can currently be located.
`string[0..1] readOnly`	`productType` Identifier of the type of product to which the capacity is related. This attribute is used only in systems where the different applications use separate key files to identify which application or product the capacity belongs to, e.g. “SASN”, “GSN_GGSN”, “SSR 8000”.
`int32 readOnly`	`sequenceNumber = 0` Sequence number of the key file. If sequence number is not available this value is 0.

class KeyFileInformation

class KeyFileManagement

ManagedElement

+-SystemFunctions

+-Lm

+-KeyFileManagement

+-KeyFileInformation [0..]

Enables installation of key files and provides information about the installed key file.

This MO is not applicable to LM deployments that connect to Arwa.

This MO is not applicable to LM deployments that connect to NeLS.

This MO is created by the system.

Actions

boolean

installKeyFile ( string uri , EcimPasswordString password );: Initiates the key file installation defined by the URI given as a parameter.

The return value is the action Id if the initiation succeeded, otherwise it is 0.

The installation is an asynchronous operation. Progress is reported via attribute reportProgress.; Parameters

Name: uri
Description: The URI of the key file that is to be installed.

The URI may refer to a local (e.g., file://data/dir/subdir/rbs006.xml) or to a remote (e.g., sftp://myuser@myhostname.ericsson.local/dir/subdir/rbs006.xml) file.

If user name is needed to access the referenced file then the URI shall include the user name. The URI must not contain password.

The generic URI syntax is defined by RFC 2396.

sftp support is reserved for future use.

Name: password
Description: Password to access the referenced file.

If authentication is not password based, this parameter will be ignored.

This parameter is reserved for future use.

Attributes
`string key mandatory noNotification restricted`	`keyFileManagementId` The value component of the RDN.
`AsyncActionProgress[0..1] readOnly`	`reportProgress` Reference to the progress report including the result of the initiated key file installation.

class KeyFileManagement

class Legacy

ManagedElement

+-Legacy

Introduced to support deprecated types

Filter: hidden

Attributes
`AdmState[0..1] readOnly`	`admState` Legacy attribute deprecated in ECIM_Top and moved to ECIM_CommonLibrary. Filter: hidden
`BasicAdmState[0..1] readOnly`	`basicAdmState` Legacy attribute deprecated in ECIM_Top and moved to ECIM_CommonLibrary. Filter: hidden
`DateTime[0..1] readOnly`	`dateTime` Legacy attribute deprecated in ECIM_Top and moved to ECIM_CommonLibrary. Filter: hidden
`IpDNSAddress[0..1] readOnly`	`ipDNSAddress` Legacy attribute deprecated in ECIM_Top and moved to ECIM_CommonLibrary. Filter: hidden
`string key mandatory noNotification restricted`	`legacyId` The value component of the RDN. Filter: hidden
`OperState[0..1] readOnly`	`operState` Legacy attribute deprecated in ECIM_Top and moved to ECIM_CommonLibrary. Filter: hidden
`SchemaFormat[0..1] readOnly`	`schemaFormat` Legacy attribute deprecated in ECIM_Top and moved to ECIM_CommonLibrary. Filter: hidden

class Legacy

class Lm

ManagedElement

+-SystemFunctions

+-Lm

+-ArwaConfiguration [0..1]

+-AutonomousMode [0..1]

+-CapacityKey [0..]

+-EmergencyUnlock [1..1]

+-FeatureKey [0..]

+-IntegrationUnlock [0..1]

+-KeyFileManagement [0..1]

+-NeLSConfiguration [0..1]

Supports activities and contains information related to license management.

This MO is created by the system.

Actions
`boolean`	`publishLicenseInventory ( );` Publish the License Inventory. Triggers the immediate publication of license information from the License Key File and usage information from the LmServer cache to the information model. Return value is true if the publication is successful, false otherwise. For LM deployments that connect to Arwa, the license information is retrieved from the Arwa License Server.
`boolean`	`refreshLicenseInventory ( );` Initiates the synchronization of Managed Element's license inventory. Return value is true if the synchronization succeeded, otherwise false. This action is not applicable to LM deployments that connect to NeLS.

Attributes
`LmPercentageType[0..1]`	`capacityAlarmHysteresis = 5` Specifies alarm hysteresis percentage for capacity licenses. When a capacity reservation alarm is active, the reservation level has to drop below the alarm threshold by the hysteresis amount in order for the alarm to be cleared or downgraded.
`LmPercentageType[0..1]`	`capacityAlarmThreshold = 80` The capacity reservation percentage level at which a minor alarm will be raised.
`string mandatory`	`fingerprint` The unique identification of the Managed Element. Limited to 256 alphanumeric characters including hyphens (-) and underscores (_), no white spaces. This attribute is not applicable to LM deployments that connect to Arwa.
`boolean readOnly`	`fingerprintUpdateable` Indicates whether or not the fingerprint of the Managed Element can be updated. This attribute is not applicable to LM deployments that connect to Arwa.
`DateTime readOnly`	`lastInventoryChange` Date and time of the last change in the license inventory. Change in the license inventory may occur when the key file is updated on the Managed Element or when license information is refreshed by synchronizing with license servers. This attribute is not applicable to LM deployments that connect to Arwa.
`DateTime readOnly`	`lastLicenseInventoryRefresh` Date and time when License Manager last synchronized the license inventory of the Managed Element.
`uint32[0..1]`	`licenseExpirationWarning = 7` License Expiration advance warning interval. The number of days before expiration of a license at which LM raises a LmLicenseExpired alarm with severity=minor.
`string key mandatory noNotification restricted`	`lmId` The value component of the RDN.
`LmState readOnly`	`lmState` The current operational state of the License Manager.
`string[0..1] readOnly`	`lockingCode` Locking code to be used by the supply organization to provide site-specific license key files. This attribute is not applicable to LM deployments that connect to Arwa or LM deployments using ELIM.
`string[0..]`	`referenceToLicenseServer` Reference to the primary license server used by the License Manager. For instance, the reference can contain the IP address of the server or locate its configuration interface. The attribute value is NULL if the License Manager does not rely on any license server. When the reference contains the IP address and port numbers of the servers, it is formatted as follows: IPv4: <IP_Address>:<Port_Number> IPv6: [<IP_Address>]:<Port_Number> (for future use)
`uint32[0..1]`	`serverReconnectAttemptInterval = 30` License Server Reconnect Attempt Interval. The interval, in seconds, between automatic reconnection attempts when LM has lost connection to all configured license servers.
`uint32[0..1]`	`serverSynchronizationInterval = 30` License Server Synchronization Interval. The interval, in minutes, at which LM automatically synchronizes license information with the license server. This attribute is not applicable to LM deployments that connect to NeLS.

class Lm

class LmDummyInstance

LmDummyInstance

This is a dummy instance to appease DX tool

Attributes
`string key mandatory noNotification restricted`	`lmDummyInstanceId` Dummy Key Attribute

class LmDummyInstance

class LocalAuthorizationMethod

ManagedElement

+-SystemFunctions

+-SecM

+-UserManagement

+-LocalAuthorizationMethod

+-CustomRole [0..]

+-CustomRule [0..]

+-Role [0..]

The Root MOC of the Local Authorization method.

Roles and authorization rules are defined to build a Role Based Access Control (RBAC) model for controlling access to Managed Element resources such as Managed Objects, attributes, actions and CLI commands.

This MO is created by the system.

Attributes
`BasicAdmState mandatory`	`administrativeState` The administrative state of this authorization method.
`string key mandatory noNotification restricted`	`localAuthorizationMethodId` The value component of the RDN.
`string[0..1]`	`userLabel` An additional descriptive text.

class LocalAuthorizationMethod

class LogicalFs

ManagedElement

+-SystemFunctions

+-FileM

+-LogicalFs

+-FileGroup [0..]

+-FileMConfigData [1..1]

Represents the root of a file system where files exposed over the NBI are represented.
The included class FileGroup allows grouping of logically related files.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`logicalFsId` Value component of the RDN.
`string[0..1]`	`userLabel` Label for free use.

class LogicalFs

class ManagedElement

ManagedElement

+-Equipment [1..1]

+-Legacy [0..1]

+-PolicyControlFunction [1..1]

+-SystemFunctions [1..1]

+-Transport [0..1]

The top-level class in the Common Information Model is Managed Element root Managed Object Class.
From this class, all model entities are contained. The Managed Object Class (MOC) has attributes that provide information on the Managed Element Identity, primary location and the products it contains.

This MO is created by the system.

Attributes
`DifferenceFromUTC[0..1] readOnly`	`dateTimeOffset` Deprecated. Difference between the value of the localDateTime attribute and UTC. Deprecated: Deprecated at version 2.3. Functionality replaced by TimeM model.”
`string[0..1]`	`dnPrefix` It provides naming context that allows the managed objects to be partitioned into logical domains. A Distingushed Name (DN) is defined by 3GPP TS 32.300, which splits the DN into a DN Prefix and Local DN, for example DN format: dnPrefix=<DN Prefix>, localDn =<Local DN> Fault Management: dnPrefix does not impact Fault Management, since an NMS recognises a Managed Element by IP address Performance Management (PM): The dnPrefix is present in the PM Data file, Result Output Period (ROP) file, if the dnPrefix attribute is specified, that is, not an empty string. Example: DC=ericsson.se,g3SubNetwork=Sweden Example: DC=ericsson.se,g3SubNetwork=Sweden
`DateTimeWithoutOffset[0..1] readOnly`	`localDateTime` Deprecated. This is the local date and time for the Managed Element. The following format is used: YYYY-MM-DDThh:mm:ss The meaning of each field is as follows: YYYY = four digit year MM = two digit month (01=January, etc.) DD = two digit day of month (01 through 31) T = time designator (shows start of time component) hh = two digits of hour (00 through 23, AM/PM not allowed) mm = two digits of minute (00 through 59) ss = two digits of second (00 through 59, leap second not allowed) The hyphen [-] and the colon [:] are used as separators within the date and time of day expressions, respectively. Deprecated: Deprecated at version 2.3. Functionality replaced by TimeM model.” Specification: ISO 8601:2004(E)
`string key mandatory noNotification restricted`	`managedElementId` Holds the name used when identifying the MO.
`string readOnly`	`managedElementType` The type of product being managed. For example the type could be RBS or CSCF.
`string[0..1]`	`networkManagedElementId` Replaces the value component of the RDN in the COM Northbound Interface. This attribute shall, if used, be set to a simple alphanumeric value. The value should be unique within the network namespace.
`ProductIdentity[0..]`	`productIdentity` Contains product information for the Managed Element and its Managed Functions. This attribute is deprecated. Deprecated:
`string readOnly`	`release` The release of the product type specified by the attribute managedElementType. It commonly contains the Managed Element release, for example L12.0, 13A, R1A
`string[0..1]`	`siteLocation` A freetext attribute describing the geographic location of a Managed Element.
`string[0..1] readOnly`	`timeZone` DEPRECATED. This is the timeZone in which the Managed Element resides. The possible values for this attribute are defined in the public-domain zoneinfo or Olson database. Locations are identified by a string indicating the continent or ocean and then the name of the location, typically the largest city within the region. See http://www.iana.org/time-zones for more information. Example: Europe/Stockholm. Deprecated: Deprecated at version 2.3. Functionality replaced by TimeM model.
`string[0..1]`	`userLabel` A freetext string for additional information to assist Managed Element identification.

class ManagedElement

class ManagedObject

ManagedObject

The ManagedObject MO represents a generic MO type. It does not represent any real resource in the system and can therefore not be instanciated. It is used as a MO-reference that can refer to multiple MO types.

References from:: CliTls; ComputeResourceRole; FileGroup; NetconfTls; NodeCredential; PmMeasurementCapabilities; Role; Snmp; TrustCategory;

class ManagedObject

class MeasurementReader

ManagedElement

+-SystemFunctions

+-Pm

+-PmJob

+-MeasurementReader

+-PmThresholdMonitoring [0..4]

Represents the capability to read the value of the MeasurementType or group of MeasurementTypes.
There can be many Measurement Reader instances for each job (one for each MeasurementType or PmGroup).
For a Threshold Job, only a MeasurementType instance can be referenced by the Measurement Reader.

Attributes
`string key mandatory noNotification restricted`	`measurementReaderId` Holds the name used when identifying the MO.
`MeasurementReaderNameValue[0..] noNotification readOnly`	`measurementReaderNameValue` Contains the real-time measurement data. Only used by a PM job of type REALTIMEJOB.
`MeasurementSpecification mandatory`	`measurementSpecification` This struct allows reference to either MeasurementType or PmGroup of MeasurementTypes to be defined.
`MoFilter[0..] nonUnique`	`moInstances` Target MO instance or instances. If not set, the job is applied to all MO instances relevant to the selected PmGroup or MeasurementType.
`ThresholdDirection[0..1]`	`thresholdDirection` Specifies the threshold direction. Used when the thresholdDirection in the MeasurementType instance is not set. If neither is set, the default value is used. Only applicable when jobType = THRESHOLDJOB.
`PerTimeInterval[0..1]`	`thresholdRateOfVariation = PER_SECOND` Time interval used for monitoring the Measurement Type against a threshold. Specifies, for Threshold Monitoring of a Cumulative Counter Measurement Type, how to calculate the value of the Measurement Type used to compare against the threshold. Only applicable when jobType = THRESHOLDJOB.

class MeasurementReader

class MeasurementType

ManagedElement

+-SystemFunctions

+-Pm

+-PmGroup

+-MeasurementType

Defines a Measurement Type on the Managed Element to be monitored and collected.
MeasurementType is unique within the PM Group.

This MO is created by the system.

References to:: FmAlarmType;

Attributes
`Aggregation noNotification readOnly`	`aggregation` Describes how the PM service aggregates the measurement values for measurement instances.
`CollectionMethod noNotification readOnly`	`collectionMethod` Contains the form in which this measurement data is obtained.
`string noNotification readOnly`	`condition` Details the condition which causes the measurement result data to be updated.
`int16[0..1] noNotification readOnly`	`derSampleRate` Specifies the sample rate for DER counters. Defined as according to 3GPP 32.401. Data related to a particular event is captured. Every nth event is registered, where n can be 1 or greater. This attribute defines n. Only applicable when collectionMethod = DER.
`string noNotification readOnly`	`description` A comprehensible explanation of this measurement.
`FmAlarmType[0..1] noNotification readOnly`	`fmAlarmType` FmAlarmType associated to Threshold Monitoring of this MeasurementType. No value means that this MeasurementType is not available for selection for a PM Threshold Job.
`int32[0..1] noNotification readOnly`	`initialValue` The initial value to which the Measurement Type is set at the beginning of a new granularity period. Only applicable when resetAtGranPeriod = true. No value means it is reset to 0.
`boolean[0..1] readOnly`	`isCompressed` Indicates if the MeasurementType result is in compressed format. For MeasurementTypes with multiplicity greater than 1, the result can be compressed by only reporting the non-zero values. A detailed explanation of the format of the measurement result is given in the measurementResult attribute. No value means that this MeasurementType is not compressed.
`string noNotification readOnly`	`measurementName` The full name of the measurement type.
`string[0..1] noNotification readOnly`	`measurementResult` Contains a description of expected result value or values. For example, "a single integer value". See 3GPP 32.404.
`MeasurementStatus noNotification readOnly`	`measurementStatus` Contains the status of the measurement. If this is set to PRELIMINARY, the measurement is available and stepped in this version of the Managed Element, but is not yet approved. If it is set to USED, the measurement is approved, available and stepped in this version of the Managed Element. If it is set to OBSOLETE, the measurement is not available and not stepped in this version of the Managed Element. If it is set to DEPRECATED, the measurement is available but is not stepped in this version of the Managed Element.
`string key mandatory noNotification restricted`	`measurementTypeId` Holds the name used when identifying the MO.
`int16 noNotification readOnly`	`multiplicity` Where a counter is an array of values, this attribute represents the size of the array. Where it produces a single value, this attribute is set to 1.
`boolean noNotification readOnly`	`resetAtGranPeriod` Specifies whether the value is initialized at the beginning of each granularity period. No value means that this MeasurementType is not initialized at the beginning of each granularity period.
`uint16 noNotification readOnly`	`size` Contains the size of the measurement in number of octets.
`ThresholdDirection[0..1] noNotification readOnly`	`thresholdDirection` The threshold direction of a Measurement Type value which raises the Threshold Alarm severity. The attribute is set if this MeasurementType shall only be monitored in one direction in a PM Threshold Job. If it can be monitored in either direction, then the direction will be set as part of the threshold job creation by setting thresholdDirection in MeasurementReader. Only applicable if fmAlarmType is set.

class MeasurementType

class NeLSConfiguration

ManagedElement

+-SystemFunctions

+-Lm

+-NeLSConfiguration

Network License Server (NeLS) configuration parameters.

This MO is created by the system.

Attributes
`NeLSConnectionStatus[0..1] readOnly`	`connectionStatus` Represents status of the connection toward NeLS.
`IpDNSAddress[0..1]`	`host` IPv6, IPv4 or DNS name. The IP address or domain name of NeLS.
`string key mandatory noNotification restricted`	`neLSConfigurationId` The value component of the RDN. Key attribute of the NeLSConfiguration class.
`uint16[0..1]`	`port` The port number that is used to connect to NeLS.
`uint32[0..1]`	`retryInterval = 30` The number of seconds between reconnection attempts. First reconnection attempt occurs randomly between 3 to 5 minutes. Subsequent attempts occur with the delay specified by retryInterval.

class NeLSConfiguration

class NetconfSsh

ManagedElement

+-SystemFunctions

+-SysM

+-NetconfSsh

Represents the Netconf configuration management service over Secure Shell.

This MO is created by the system.

Attributes
`BasicAdmState mandatory`	`administrativeState` The administrative state for the Netconf target. When LOCKED all on-going netconf connections will immediately be terminated. NOTE: Setting the administrativState to LOCKED for all Netconf and CLI interfaces disables O&M access to the ME. Refer to product specific troubleshooting instructions to resolve such a scenario.
`string key mandatory noNotification restricted`	`netconfSshId` The value component of the RDN.

class NetconfSsh

class NetconfTls

ManagedElement

+-SystemFunctions

+-SysM

+-NetconfTls

Represents the Netconf configuration management service over Transport Layer Security (TLS).

This MO is created by the system.

References to:: ManagedObject;

Attributes
`BasicAdmState mandatory`	`administrativeState` The administrative state for the Netconf target. When LOCKED all on-going netconf connections will immediately be terminated. NOTE: Setting the administrativState to LOCKED for all Netconf and CLI interfaces disables O&M access to the ME. Refer to product specific troubleshooting instructions to resolve such a scenario.
`string key mandatory noNotification restricted`	`netconfTlsId` The value component of the RDN.
`ManagedObject[0..1]`	`nodeCredential` The credential used for the NETCONF service. Specifies the DN of a NodeCredential MO in Certificate Management.
`ManagedObject[0..1]`	`trustCategory` The set of certificates trusted by the NETCONF service. Specifies the DN of a TrustCategory MO in Certificate Management.

class NetconfTls

class NetsharedConfig

NetsharedConfig

+-PeerCluster [0..]

+-ServerAddress [0..]

The root object for the netshared configuration. Created by DBS during installation.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`dbsNetsharedConfigId` Unique id.
`boolean`	`isEnabled = false` A boolean value which defines whether network redundancy is enabled.
`boolean`	`preferredCluster = false` .

class NetsharedConfig

class Network

ManagedElement

+-PolicyControlFunction

+-Network

+-Apns [1..1]

+-DiameterNodes [1..1]

+-SmsCenter [1..1]

+-WebServiceEndPoints [1..1]

Network class serves as a container for network-related configuration classes.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`networkId` Identifies the instance of this class. Forced value = 1.

class Network

class NodeCredential

ManagedElement

+-SystemFunctions

+-SecM

+-CertM

+-NodeCredential

Represents the node credential and contains information about the corresponding certificate.

References to:: EnrollmentAuthority; EnrollmentServerGroup; ManagedObject;

Actions
`boolean`	`cancelEnrollment ( );` Cancels the enrollment process. If the enrollment runs in online polling mode, this action stops polling the enrollment server. The enrollment rejects to confirm the PKI response from the enrollment server and releases the generated key-pair. The enrollment fails.
`boolean`	`installCredentialFromUri ( string uri , EcimPasswordString uriPassword , EcimPasswordString credentialPassword , Fingerprint fingerprint );` Installs a node credential or certificate from the specified Uniform Resource Identifier (URI). If the container file is in PKCS#12 format, the action implicitly starts an offline enrollment. If the file is a certificate in Privacy Enhanced Mail (PEM) or Distinguished Encoding Rules (DER) format, this action closes the ongoing offline enrollment process started by the startOfflineCsrEnrollment action. The action can be invoked if the enrollmentSupport attribute of the CertMCapabilites MO indicates that offline enrollment is supported. For a container file in PKCS#12 format, the action can be invoked if there is no other action in progress on this MO. For a certificate file in PEM or DER format, the action can be invoked if there is a startOfflineCsrEnrollment action in progress on this MO. The action returns immediately after invocation. The progress of the action can be tracked via the enrollmentProgress attribute. The action returns with TRUE after successful invocation, otherwise it returns with FALSE. The generic URI syntax is defined by RFC 3986. Example: sftp://myuser@myhostname.ericsson.local/dir/subdir/file Example: http://myhostname.ericsson.local/dir/subdir/certificate Parameters Name: uri Description: This parameter contains a URI assumed to point to the certificate or credential container file. The generic Uniform Resource Identifier (URI) syntax is defined by RFC 3986. Example: sftp://myuser@myhostname.ericsson.local/dir/subdir/file Example: http://myhostname.ericsson.local/dir/subdir/certificate The URI must not contain any password. The password shall be provided in the second parameter of this action. The URI may be local relative (e.g. data/dir/subdir/file), or local absolute (e.g. file:///data/dir/subdir/file), or remote (e.g. sftp://user@hostname/dir/subdir/file) or remote relative (e.g. sftp://user@hostname/~/cert.pem). If the URI is local relative, the file is expected to be under directory path indicated by the localFileStorePath attribute in the CertM MO. Name: uriPassword Description: The password part of the Uniform Resource Identifier (URI). If a password is not required, the 'NULL' string has to be provided. Name: credentialPassword Description: The password for decrypting the PKCS#12 container file. If the action is called to install a certificate in Privacy Enhanced Mail (PEM) or Distinguished Encoding Rules (DER) format to finish a running enrollment process, the value of password has to be 'NULL'. Name: fingerprint Description: The Secure Hash Algorithm (SHA) fingerprint of the certificate to be installed. The fingerprint is checked against the fingerprint calculated on the installed file. If the verification of the fingerprint is not required, the 'NULL' string must be provided. The hash must be calculated by the SHA algorithm indicated in fingerprintSupport of the CertMCapabilities MO.
`boolean`	`startOfflineCsrEnrollment ( string uri , EcimPasswordString uriPassword );` Starts a manual enrollment procedure. Creates a PKCS#10 Certificate Signing Request (CSR) that is stored at the specified local Uniform Resource Identifier URI. A file transfer service can be used to fetch the CSR file from the ME. The action can be invoked if the enrollmentSupport attribute of the CertMCapabilites MO indicates that offline CSR-based enrollment is supported. The action uses attributes subjectName and keyInfo attributes as inputs. If no other action is in progress on this MO, the action can be invoked and it returns immediately after invocation. The action progress can be tracked via the enrollmentProgress attribute. The action returns with TRUE after successful invocation, otherwise it returns with FALSE. Parameters Name: uri Description: This parameter contains a URI assumed to point to the certificate or credential container file. The generic Uniform Resource Identifier (URI) syntax is defined by RFC 3986. Example: sftp://myuser@myhostname.ericsson.local/dir/subdir/file The URI must not contain any password. The password shall be provided in the second parameter of this action. The URI may be local relative e.g. dir/subdir/csr.p10, or local absolute e.g. file:///data/dir/subdir/csr.p10, or remote e.g. sftp://user@hostname/dir/subdir/csr.p10). If the URI is local relative, the file will be stored under the path indicated by the localFileStorePath attribute in the CertM MO. Name: uriPassword Description: The password section of the Uniform Resource Identifier (URI). If a password is not required, the 'NULL' string must be provided.
`boolean`	`startOnlineEnrollment ( EcimPasswordString challengePassword );` Starts the online enrollment process. For initial enrollment a challengePassword must be provided. The action can be invoked if the enrollmentSupport attribute of the CertMCapabilites MO indicates that online enrollment is supported. As inputs, the action uses subjectName, keyInfo, enrollmentServerGroup and enrollmentAuthority attributes. If no other action is in progress on this MO, the action can be invoked and it returns immediately after invocation. Action progress can be tracked via the enrollmentProgress attribute. The action returns with TRUE after successful invocation, otherwise it returns with FALSE. Parameters Name: challengePassword Description: The one-time challenge password used as a shared-secret between the ME and the enrollment CA.

Attributes
`CertificateContent[0..1] readOnly`	`certificateContent` The X.509 content of the certificate.
`CertificateState[0..1] readOnly`	`certificateState` The current state of the certificate.
`EnrollmentAuthority[0..1]`	`enrollmentAuthority` The DN of the EnrollmentAuthority used for online enrollments.
`AsyncActionProgress[0..1] readOnly`	`enrollmentProgress` Reports the progress of the ongoing enrollment.
`EnrollmentServerGroup[0..1]`	`enrollmentServerGroup` The DN of the EnrollmentServerGroup used for online enrollments.
`uint16[0..1]`	`enrollmentTimer = 60` The enrollment poll timer in minutes. If the time indicated by this timer elapses before the enrollment is finished, the enrollment fails. Used only for online enrollment.
`ExpiryAlarmThresholdRange`	`expiryAlarmThreshold = 30` Threshold value to calculate the date of the alarm indicating the coming expiry of the certificate. The alarm severity is raised to MINOR in case the remaining time to expiry is reduced to the one third of the configured threshold. The alarm severity is raised to MAJOR in case the remaining time to expiry is reduced to the one tenth of the configured threshold or one week. The alarm is cleared and a certificate not available alarm is raised when the certificate expires.
`KeyInfo[0..1]`	`keyInfo` Specifies the key type and length that is used for the next enrollment.
`string key mandatory noNotification restricted`	`nodeCredentialId` The value component of the RDN.
`RenewalMode[0..1]`	`renewalMode = MANUAL` The certificate renewal mode for online enrollment. Renewals use subjectName, keyInfo and enrollmentServerGroup attributes as inputs. If configured to AUTOMATIC, manually initiated offline and online renewals fail. If an automatic enrollment failed alarm is present on the MO, setting this attribute to MANUAL clears the alarm.
`ManagedObject[0..] nonUnique noNotification readOnly`	`reservedByUser` Indicates the users of this NodeCredential MO. The users are identified by Distinguished Names of Credential User Managed Objects.
`string[0..1] noNotification restricted`	`subjectName` The X.501 DN to be used in the subject field of the requested certificate. For instance: "C=SE,O=Ericsson,CN=someserialnumber.ericsson.com"
`string[0..1]`	`userLabel` An additional descriptive text.

class NodeCredential

class NotificationConfig

ManagedElement

+-PolicyControlFunction

+-NotificationConfig

Holds end user notification global configuration data.

This MO is created by the system.

Attributes
`boolean[0..1] noNotification`	`enableDelivery = false` Indicates if the end user notifications are enabled or not.
`string key mandatory noNotification restricted`	`notificationConfigId` Identifies the instance of this class. Fixed value = 1.
`string[0..1]`	`smsNotificationFrom` It describes the sender identification of the SMS notification.

class NotificationConfig

class NotifObject

ManagedElement

+-PolicyControlFunction

+-EntityData

+-NotifObjects

+-NotifObject

This class maps notifications objects to the SAPC internal business logic objects.
When the SAPC receives notification of data changes from an external database, it includes an indication of the changed objects and its key.

Attributes
`string key mandatory noNotification restricted`	`notifObjectId` One of the SAPC business objects. The SAPC only supports the value "Subscriber".
`ObjectMapping[0..] nonUnique`	`objectMapping` Contains the mapping details for the NotifObject.

class NotifObject

class NotifObjects

ManagedElement

+-PolicyControlFunction

+-EntityData

+-NotifObjects

+-NotifObject [0..]

Serves as repository of NotifObject instances.

Attributes
`string key mandatory noNotification restricted`	`notifObjectsId` Identifies the instance of this class.

class NotifObjects

class Ntp

ManagedElement

+-SystemFunctions

+-SysM

+-TimeM

+-Ntp

+-NtpServer [0..]

The NTP top class.

Attributes
`string key mandatory noNotification restricted`	`ntpId` The key attribute.

class Ntp

class NtpServer

ManagedElement

+-SystemFunctions

+-SysM

+-NtpServer

A persistent NTP client mode network association with a specified remote server or local reference clock address.

Attributes
`BasicAdmState mandatory`	`administrativeState` Locks or unlocks the operation of the NTP client function. This is a convenience function to permit some or all NtpServer instances to be temporarily locked without having to delete the object.
`string key mandatory noNotification restricted`	`ntpServerId` The value component of the RDN.
`IpDNSAddress mandatory`	`serverAddress` The address of the NTP server with which a persistent client server mode association will be made. The serverAddress represents either a V4 or a V6 IP address or a DNS domain name.
`string[0..1]`	`userLabel` An additional descriptive text.

class NtpServer

ManagedElement

+-SystemFunctions

+-SysM

+-TimeM

+-Ntp

+-NtpServer

The NTP server configuration data.

This MOC presents a persistent NTP client mode network association with a specified remote server or local reference clock address.

Attributes
`AdmState mandatory`	`administrativeState` Locks or unlocks the operation of the NTP client function. This is a convenience function to permit some or all NtpServer instances to be temporarily locked without the need to delete the object
`string key mandatory noNotification restricted`	`ntpServerId` The value component of the RDN.
`IpDNSAddress mandatory`	`serverAddress` The address of the NTP server with which a persistent client server mode association is made. The serverAddress represents either a V4 or a V6 IP address, or a DNS domain name.
`string[0..1]`	`userLabel` An additional descriptive text.

class NtpServer

class NtpServerConf

Config

+-NtpServerConf

Attributes
`BasicAdmState mandatory`	`administrativeState`
`uint32 key mandatory noNotification restricted`	`ntpServerId`
`IpDNSAddress mandatory`	`serverAddress`
`string[0..1]`	`userLabel`

class NtpServerConf

class PccConfig

ManagedElement

+-PolicyControlFunction

+-AppConfig

+-PccConfig

Configuration data applicable to Pcc access.

This MO is created by the system.

Attributes
`boolean[0..1] noNotification`	`enableEmergenciesWithImei = true` Enables emergencies with IMEI. Allows the use of unauthenticated emergency services, that is, IMEI used as subscriber traffic identifier.
`EventTriggers[0..] noNotification`	`eventTriggers` Pcc Event Triggers. Indicates the events that the SAPC is interested in receiving from the PCEF, whenever the subscribed events occur.
`string key mandatory noNotification restricted`	`pccConfigId` Identifies the instance of this class. Forced value=1.
`SubsIdType[0..1] noNotification`	`subsIdType` Indicates the type of Subscription Identifier used to locate the subscriber profile. Used when the SAPC receives several identifiers in incoming Gx requests. When this attribute is not provided, the SAPC uses the content of the first received Subscription-Id AVP.

class PccConfig

class PeerAddress

NetsharedConfig

+-PeerCluster

+-Connection

+-PeerAddress

The remote address and port the update channel tries to connect to.

Attributes
`string key mandatory noNotification restricted`	`dbsPeerAddressId` Unique id.
`string mandatory noNotification`	`host` Host address.
`uint16 mandatory noNotification`	`port` Host port.

class PeerAddress

class PeerCluster

NetsharedConfig

+-PeerCluster

+-Connection [0..]

Represents the remote cluster identified by its cluster ID.

Actions
`string`	`syncFromPeer ( );` This method starts synchronization from the peer cluster.

Attributes
`string key mandatory noNotification restricted`	`dbsNetsharedPeerClusterId` Unique id.
`boolean[0..1]`	`isEnabled` This field is currently unused.
`string readOnly`	`state` The state of the netshared service toward this PeerCluster.

class PeerCluster

class Pm

ManagedElement

+-SystemFunctions

+-Pm

+-PmGroup [0..]

+-PmJob [0..]

+-PmMeasurementCapabilities [1..1]

The top class of the Performance Management model.
It is used to manage the Performance Management jobs and PM measurements.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`pmId` Holds the name used when identifying the MO.

class Pm

class PmGroup

ManagedElement

+-SystemFunctions

+-Pm

+-PmGroup

+-MeasurementType [1..]

A grouping of the measurements into logical grouping.
PmGroup is unique in the ME.

This MO is created by the system.

Attributes
`string[0..1] noNotification readOnly`	`category` Deprecated, Comma-separated sequence of key words. Used for categorization and searching for data among reports. e.g. KPI, Feature xx, etc. Deprecated in ECIM PM 2.2. Deprecated: There is no practical use for this attribute in the model. It will not be visible in PM report files.
`boolean[0..1] noNotification readOnly`	`consistentData` Deprecated, Defines whether or not this group of data is guaranteed to be consistent. Counter Data Consistency In some MEs there are both detailed counters, e.g. #failedConnections and #succeededConnections, as well as more high-level summary counters. e.g. #totalConnections. A counter group is guaranteed to be consistent if it does not contain a summary counter whose value can be calculated based on other counters in that group, or if it does so but this calculation will always show the same value as the summary counter. Deprecated in ECIM PM 2.2. Deprecated: There is no practical need for this attribute in the model.
`string[0..1] noNotification readOnly`	`description` Description of the PmGroup.
`string[0..1] noNotification readOnly`	`generation` Determines if group concerns GSM, UMTS, EPS, combined (GSM+UMTS+EPS) or IMS measurements. Values are defined in 3GPP standard 32:404.
`ManagedObjectClass[0..1] noNotification readOnly`	`moClass` The Managed Object Class that uses the Measurement Types in this PmGroup. No value means this PM Group is not associated with any specific Managed Object Class.
`string key mandatory noNotification restricted`	`pmGroupId` Holds the name used when identifying the MO.
`string noNotification readOnly`	`pmGroupVersion` PM Group version identifier. Unique version identifier associated with a change to the contents of the PM Group, where new MeasurementTypes have been added.
`string[0..1] noNotification readOnly`	`switchingTechnology` The Switching domain or domains to which this measurement is applicable. Values are defined in 3GPP standard 32.404.
`boolean[0..1] noNotification readOnly`	`validity` States if the group is valid. A group might not be valid if, for example, the feature that this group is used for is not available to the customer.

class PmGroup

class PmJob

ManagedElement

+-SystemFunctions

+-Pm

+-PmJob

+-MeasurementReader [1..]

Describes a user-defined PM job on the Managed Element.
A PM Job defines the attributes required per job and also defines the measurements to be included in the job. An instance of the MeasurementReader class is created for every PmGroup or MeasurementType instance being measured.

Attributes
`CompressionTypes[0..1]`	`compressionType` Indicates file compression type to be applied to the report file. If no value is set, then no compression is to be applied to the report file for this job. Must have the same value for all PM jobs with the same jobGroup tag and reportingPeriod assigned. Must have the same value for all PM jobs for which no jobGroup tag is assigned (the "default" jobGroup), but the same reportingPeriod assigned. Only applicable when jobType = MEASUREMENTJOB.
`JobState readOnly`	`currentJobState` Describes the current state of the PM job.
`TimePeriod[0..1]`	`granularityPeriod = FIFTEEN_MIN` Contains the granularity period of the job. The granularity period is the time between the initiation of two successive gatherings of measurement data. This is directly related to the ReportingPeriod as the granularity period can not be longer than the reporting period. Possible Values (s=second,m=minute, h=hour): 10s,30s,1m, 5m, 15m, 30m, 1h, 12h, 24h. Default Value: 15m.
`JobControl[0..1] readOnly`	`jobControl = FULL` Describes the level of MS control of the PM job. If no value is set, the MS shall treat it as FULL.
`string[0..1]`	`jobGroup` Tag for grouping PM measurement job results. Represents a grouping of separate PM Jobs for which the measurement results must be collected together in a single report file for that group only. If this attribute is not set, then for each reporting period, the measurement results for this job are written to the same report file as other jobs that have no job group assigned. Only applicable when jobType = MEASUREMENTJOB.
`JobPriority[0..1]`	`jobPriority = MEDIUM` Contains the priority of the job. Each job must have a priority if jobPrioritizationSupport in the PmMeasurementCapabilities is set to true.
`JobType[0..1]`	`jobType = MEASUREMENTJOB` Contains the type of PM job.
`string key mandatory noNotification restricted`	`pmJobId` Holds the name used when identifying the MO.
`ReportContentGeneration[0..1]`	`reportContentGeneration = CHANGED_ONLY` Describes the measurement result file content generated by PM service.
`TimePeriod[0..1]`	`reportingPeriod = FIFTEEN_MIN` Contains the reporting period of the result file. This is directly related to the granularity period as the granularity period can not be longer than the reporting period. Possible Values (s=second,m=minute, h=hour): 10s,30s,1m, 5m, 15m, 30m, 1h, 12h, 24h. Default Value: 15m. The value of reportingPeriod must be equal to the value of granularityPeriod if fileRPSupported in PmMeasurementCapabilities is false, or may be equal to a multiple of the value of granularityPeriod if fileRPSupported is set to true. Only applicable when jobType = MEASUREMENTJOB.
`JobState[0..1]`	`requestedJobState = ACTIVE` Contains the requested state of the PM job. It represents the state that the job has been ordered to reach.

class PmJob

class PmMeasurementCapabilities

ManagedElement

+-SystemFunctions

+-Pm

+-PmMeasurementCapabilities

Contains the measurement capabilities of the ME.

This MO is created by the system.

References to:: ManagedObject;

Attributes
`boolean[0..1] readOnly`	`alignedReportingPeriod` Defines whether or not the Managed Element aligns its reporting periods to the hour. Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as true.
`ManagedObject[0..1] readOnly`	`fileGroup` Deprecated, contains the file storage path to the measurement files on the ME. This attribute is only set if FileM is present, and refers to the file storage path. If this attribute is not set, the file storage path is stored locally in the fileLocation attribute in PmMeasurementCapabilities. Deprecated in ECIM PM 2.0. Deprecated: References to attributes in FileM must be removed from Common Fragments. fileLocation attribute contains all required information. Deprecated in ECIM PM 2.0.
`string[0..1] readOnly`	`fileLocation` Contains the path to the virtual file system on the node from which to fetch the measurement files. Only applicable when measurementJobSupport = true.
`boolean[0..1] readOnly`	`fileRPSupported` Specifies if ME supports a file Reporting Period different to Granularity Period where RP > GP. Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as false.
`boolean[0..1] readOnly`	`finalROP` Indicates if measurement file for the last Result Output Period (ROP) is expected. When a measurement job is stopped, this attribute specifies whether a result file for the last ROP is expected (true), or not expected (false). Only applicable when measurementJobSupport = true.
`boolean[0..1] readOnly`	`jobGroupingSupport` Indicates if Managed Element supports grouping of selected measurement job results in a report file. If set to true, the ME groups selected measurement job results into one file per reporting period based on the PmJob attribute jobGroup. If set to false, the default behaviour is to generate a single PM report file per reporting period for all jobs. Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as false.
`boolean[0..1] readOnly`	`jobPrioritizationSupport` Defines whether or not measurement jobs can be stopped by the system. Based on the priority of the Measurement jobs, they can either be stopped (true) or not (false) by the system. Attribute jobPriority in the job sets the priority per job. Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as false.
`JobStartStopSupport readOnly`	`jobStartStopSupport` Specifies whether or not Performance Management jobs defined in the ME can be started and stopped. Possible values: NONE: a job is started when it is created and runs until it is deleted. BASIC: simple start/stop supported.
`uint16 readOnly`	`maxNoOfJobs` Specifies the maximum number of jobs that can be defined. A value of 0 means there is no limit to the number of jobs. If the specified limit is exceeded, when a performance monitoring is created or started, the create job or start job operation is rejected. This is an upper system limit, and support for it cannot be guaranteed in high-load conditions.
`uint32[0..1] readOnly`	`maxNoOfMeasurements` The maximum number of counter instances, i.e. active counters, that can be reported in one ROP. This is used by an MS to determine the max PM data file size. This is an upper-system limit, and support for it cannot be guaranteed in high-load conditions. A value of 0 means there is no limit. Only applicable when measurementJobSupport = true.
`uint16[0..1] readOnly`	`maxNoOfPmFiles` Specifies the maximum number of Result Output Period (ROP) files that are maintained in the ME. If a new file is created and the limit is exceeded, the oldest file is deleted. This is an upper-system limit, and support for it cannot be guaranteed in high-load conditions. Only applicable when measurementJobSupport = true.
`boolean readOnly`	`measurementJobSupport` Indicates if Managed Element supports Measurement Jobs.
`string key mandatory noNotification restricted`	`pmMeasurementCapabilitiesId` Holds the name used when identifying the MO.
`boolean[0..1] readOnly`	`producesUtcRopFiles` Deprecated, Indicates if the PM report files are produced using UTC format. If the timestamp is expressed in UTC time with no offset, then the value is true. If the timestamp is expressed in local time with UTC offset, then the value is false. Only applicable when measurementJobSupport = true. Deprecated in ECIM PM 2.5. Deprecated: Attribute definition was ambiguous. It is replaced by new attribute ropFilenameTimestamp. Deprecated in ECIM PM 2.5.
`boolean readOnly`	`realTimeJobSupport` Indicates if the Managed Element supports Realtime Jobs.
`RopFilenameTimestamp[0..1] readOnly`	`ropFilenameTimestamp` Indicates how the timestamp format is used in the Result Output Period (ROP) filename. Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as LOCAL_WITH_UTC_OFFSET.
`CompressionTypes[0..2] nonUnique readOnly`	`supportedCompressionTypes` Indicates which compression types are supported by the ME for report files. No value means that compression of report files is not supported. Only applicable when measurementJobSupport = true.
`TimePeriod[0..9] nonUnique readOnly`	`supportedMeasJobGps` Indicates which granularity periods are supported by the ME for Measurement jobs. Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as a single value of FIFTEEN_MIN.
`TimePeriod[0..9] nonUnique readOnly`	`supportedRopPeriods` Indicates the Result Output Period (ROP) or ROPs supported by the ME. Only applicable when measurementJobSupport = true. If no value is set, the MS shall treat it as a single value of FIFTEEN_MIN.
`TimePeriod[0..9] nonUnique readOnly`	`supportedRtJobGps` Indicates which granularity periods are supported by the ME for Realtime jobs. Only applicable when realTimeJobSupport = true. If no value is set, the MS shall treat it as a single value of ONE_MIN.
`TimePeriod[0..9] nonUnique readOnly`	`supportedThreshJobGps` Indicates which granularity periods are supported by the ME for Threshold jobs. Only applicable when thresholdJobSupport = true. If no value is set, the MS shall treat it as a single value of FIFTEEN_MIN.
`boolean readOnly`	`thresholdJobSupport` Indicates if the Managed Element supports Threshold Jobs.

class PmMeasurementCapabilities

class PmThresholdMonitoring

ManagedElement

+-SystemFunctions

+-Pm

+-PmJob

+-MeasurementReader

+-PmThresholdMonitoring

Contains configuration of each threshold for Threshold jobs.
To be able to monitor the overall health of the network, thresholds are used for generating Performance Alarms.
Performance alarms cannot be cleared manually. Performance alarms must be cleared when the threshold is (a) crossed, or (b) reached, in the opposite direction to the one that triggers the alarm.

Attributes
`string key mandatory noNotification restricted`	`pmThresholdMonitoringId` Holds the name used when identifying the MO.
`int64 mandatory`	`thresholdHigh` Defines the high-threshold level for this alarm severity. For each pair of high-threshold and low-threshold levels, one of them must generate an alarm notification - or increase the severity of an existing alarm. The other one must generate an alarm clear notification, or decrease the severity of an existing alarm. If the direction of the threshold is increasing, a new alarm (or severity increase of an existing alarm) is not generated before the measurement value has (a) crossed or (b) reached the high-level threshold value. Furthermore, an existing alarm is not cleared (or its severity decreased) before the measurement value has reached or crossed the low-level threshold value. For decreasing thresholds, the opposite is applied. The hysteresis mechanism can be used for both Gauges and Cumulative Counters thresholds.
`int64 mandatory`	`thresholdLow` Defines the low-threshold level for this alarm severity. For each pair of high-threshold and low-threshold levels, one of them must generate an alarm notification, or increase the severity of an existing alarm. The other one must generate an alarm clear notification, or decrease the severity of an existing alarm. If the direction of the threshold is increasing, a new alarm (or severity increase of an existing alarm) is not generated before the measurement value has (a) crossed or (b) reached the high-level threshold value. Furthermore, an existing alarm is not cleared (or its severity decreased) before the measurement value has reached or crossed the low-level threshold value. For decreasing thresholds, the opposite is applied. The hysteresis mechanism can be used for both Gauges and Cumulative Counters thresholds.
`SeverityLevel[0..1]`	`thresholdSeverity = MINOR` Threshold severity. One of the following Severity Levels must be assigned per threshold, in order to raise a threshold alarm of this severity, or change an existing alarm to this severity, if that threshold is reached or crossed: CRITICAL MAJOR MINOR WARNING Severity level CLEARED is not a valid severity level and cannot be assigned to this attribute.

class PmThresholdMonitoring

class PolicyControlFunction

ManagedElement

+-PolicyControlFunction

+-AppConfig [1..1]

+-BusinessEvents [1..1]

+-EntityData [1..1]

+-FlexibleDiameter [1..1]

+-GeoRedManager [1..1]

+-Network [1..1]

+-NotificationConfig [1..1]

The SAPC application class serves as container for the classes belonging to that application.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`policyControlFunctionId` Identifies the instance of this class. Fixed value=1.
`string noNotification readOnly`	`release` The product release of the ManagedFunction. It commonly contains the Managed Function release, for example L12.0, 13A, R1A
`string[0..1]`	`userLabel` Used for product free-text description.

class PolicyControlFunction

class Role

ManagedElement

+-SystemFunctions

+-SecM

+-UserManagement

+-LocalAuthorizationMethod

+-Role

+-Rule [0..]

Authorization roles that may be assigned to users.

Roles have a containment relationship to the rules which define the access controls to objects.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`roleId` The value component of the RDN.
`string[0..1] readOnly`	`roleName` The role name a user may have. The name is matched against role names retrieved from the user information store.
`string[0..1]`	`userLabel` An additional descriptive text.

class Role

ManagedElement

+-SystemFunctions

+-SysM

+-CrM

+-Role

Represents a role that determines the type of service provided by a compute resource.

This MO is created by the system.

References to:: ManagedObject;

Attributes
`ManagedObject[0..] nonUnique readOnly`	`isProvidedBy` Reference to an instance of Compute Resource Role.
`string key mandatory noNotification restricted`	`roleId` The value component of the RDN.
`Scalability[0..1] readOnly`	`scalability` Indicates whether or not the role can scale for capacity reasons.

class Role

class Rule

ManagedElement

+-SystemFunctions

+-SecM

+-UserManagement

+-LocalAuthorizationMethod

+-Role

+-Rule

The rules that define the access control to objects.

A Rule MO is contained by a Role MO which may be then applied to users.

This MO is created by the system.

Attributes
`PermissionType[0..1] noNotification readOnly`	`permission` Permission is the access right the rule provides on a target specified by the ruleData attribute.
`RuleDataType[0..1] noNotification readOnly`	`ruleData` Defines the model elements for which the permission is applicable.
`string key mandatory noNotification restricted`	`ruleId` The value component of the RDN.
`string[0..1] noNotification readOnly`	`ruleName` The rule name. The rule name is a string of '<FunctionName>_<RuleNumber>' <FunctionName> is a unique name for a system, transport, equipment, or application function. <RuleNumber> is a numerical ID of the Rule MO within a <FunctionName>. Examples: BackupAndRestoreManagement_1 FileManagement_2 SecurityManagement_2 SystemManagement_1
`string[0..1]`	`userLabel` An additional descriptive text.

class Rule

class Schema

ManagedElement

+-SystemFunctions

+-SysM

+-Schema

Represents a MIM model fragment whose corresponding functionality is operational in the Managed Element.

This MO is created by the system.

Actions

void

export ( string uri , EcimPasswordString password );: Pushes the schema file out from the ME.

The URI shall contain both the file name and the destination address. The password is optional.; Parameters

Name: uri
Description: The URI used for identifying the adress to the remote location to which the file shall be transferred to.

Name: password
Description: The password used for connecting to the remote file location.

Attributes
`string[0..1] readOnly`	`baseModelIdentifier` Represents the name of the common information model fragment that the data model fragment is derived from.
`string[0..1] readOnly`	`baseModelVersion` The full version information for the common information model fragment that the data model fragment is derived from.
`string[0..1] readOnly`	`identifier` Represents the name of the data model fragment that the schema represents.
`string key mandatory noNotification restricted`	`schemaId` The value component of the RDN. From a usability perspective, the value could e.g. be set to the corresponding model name.
`string[0..] nonUnique readOnly`	`selectedModelOptions` Contains the model features used in the generation of the MIM. The MS can query the information from the model without having to access the MIM file itself.
`string[0..1] readOnly`	`version` Represents the full version information for the data model fragment that the schema represents.

class Schema

class SecM

ManagedElement

+-SystemFunctions

+-SecM

+-CertM [1..1]

+-Ssh [0..1]

+-Tls [0..1]

+-UserManagement [1..1]

Security Management root MOC.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`secMId` The value component of the RDN.

class SecM

class ServerAddress

NetsharedConfig

+-ServerAddress

The local address and port where DBS listens for incoming connections.

Attributes
`string key mandatory noNotification restricted`	`dbsServerAddressId` Unique id.
`string mandatory noNotification`	`host` Host address.
`uint16 mandatory noNotification`	`port` Host port.

class ServerAddress

class SmsCenter

ManagedElement

+-PolicyControlFunction

+-Network

+-SmsCenter

+-SmsDestination [0..]

Container that holds generic SMS Center configuration data.
The data is common to all SmsDestination objects that are part of it.

This MO is created by the system.

Attributes
`int32[0..1]`	`connectionTimeout = 5000` It represents the maximum time (in milliseconds) waiting for a SMPP connection to be established. It also represents the maximum time (in milliseconds) waiting for a SMS notification to be acknowledged.
`int32[0..1]`	`maxNumberRetries = 1` It represents the maximum number of delivery retries. A retry is performed when sending a SMS notification to a SMS center fails.
`string key mandatory noNotification restricted`	`smsCenterId` Identifies the instance of this class. Fixed value = 1.

class SmsCenter

class SmsDestination

ManagedElement

+-PolicyControlFunction

+-Network

+-SmsCenter

+-SmsDestination

It represents a SMS center node (end-point) that SAPC directly communicates with.

Attributes
`int32[0..1] noNotification`	`serverNpiDestination = 0` It represents the Numeric Plan Indicator (NPI) of the notification destination. Range: 0-255.
`int32[0..1] noNotification`	`serverNpiOrigin = 0` It represents the Numeric Plan Indicator (NPI) of the notification origin. Range: 0-255.
`int32[0..1] noNotification`	`serverPort = 2775` It represents the TCP/IP port used by the SMS center to communicate with.
`EcimPassword[0..1]`	`serverPwd` If authentication to the SMS center is needed, it represents the password of the user. The maximum length of the password is 9 bytes.
`int32[0..1] noNotification`	`serverTonDestination = 0` It represents the Type of Number (ToN) of the notification destination. Range: 0-255.
`int32[0..1] noNotification`	`serverTonOrigin = 0` It represents the Type of Number (ToN) of the notification origin. Range: 0-255.
`string mandatory`	`serverUser` If authentication is needed, it represents the user to authenticate to the SMS center node. The maximum length is 16 bytes.
`IpDNSAddress key mandatory noNotification restricted`	`smsDestinationId` Identifies the instance of this class. It represents the IP-Address of SMS Center node.

class SmsDestination

class Snmp

ManagedElement

+-SystemFunctions

+-SysM

+-Snmp

+-SnmpTargetV1 [0..]

+-SnmpTargetV2C [0..]

+-SnmpTargetV3 [0..]

+-SnmpTargetV3Dtls [0..]

+-SnmpViewV1 [0..]

+-SnmpViewV2C [0..]

+-SnmpViewV3 [0..]

Configuration of the SNMP protocol.
For instance configuration of the IP addresses and ports used for SNMP are supported.

This MO is created by the system.

References to:: ManagedObject;

Attributes
`BasicAdmState`	`administrativeState = UNLOCKED` The administrative state for the SNMP protocol. If LOCKED, no SNMP Traps (alarm, alerts or heartbeats) are generated and all access to the SNMP protocol is disabled.
`HostAndPort[0..]`	`agentAddress` Listen addresses for the SNMP agent. This attribute defines on which ports and IP addresses the agent shall listen for incoming SNMP requests using the UDP protocol. The typical configuration is using one port with IP address 0.0.0.0 and port 161, which means that the standard SNMP port is used on all interfaces.
`HostAndPort[0..]`	`agentAddressDtls` Listen addresses for the SNMP agent using DTLS. This attribute defines on which ports and IP addresses the agent shall listen for incoming SNMP requests using the DTLS transport protocol. The typical configuration is using one port with IP address 0.0.0.0 and port 10161, which means that the standard port for SNMP over DTLS is used on all interfaces.
`ManagedObject[0..1]`	`nodeCredential` The node credential to be used for SNMP notifications using the Transport Security Model. Specifies the DN of a NodeCredential MO in Certificate Management. If Transport Sercurity Model (DTLS) is not used, the attribute value may be empty.
`OperState[0..1] noNotification readOnly`	`operationalState` The operational status of the SNMP functionality. If DISABLED, there is some problem that degrades the SNMP functionality.
`string key mandatory noNotification restricted`	`snmpId` The value component of the RDN.
`ManagedObject[0..1]`	`trustCategory` The trust category used for authentication of DTLS protocol users. Specifies the DN of a TrustCategory MO in Certificate Management. If not the DTLS protocol is used, the attribute value may be empty.

class Snmp

class SnmpTargetV1

ManagedElement

+-SystemFunctions

+-SysM

+-Snmp

+-SnmpTargetV1

An SNMP target defines a Trap receiver and gives access privileges.
This class, defines V1 protocol attributes.

Attributes
`IPAddress mandatory`	`address` Host address (or DNS name) for the SNMP Trap target.
`BasicAdmState`	`administrativeState = UNLOCKED` Administrative state for the SNMP target. When LOCKED, for this MO instance traps will not be sent and access is not allowed.
`SnmpCommunity mandatory`	`community` The SNMP community string.
`boolean`	`isMibWritable = true` Specifies if the user has write access to MIB or not. If false, the user is only allowed to perform read access (SNMP GET etc.) The value of this attribute has no relevance if there is a SnmpViewV1 for the community of this instance. The permissions in the view will then override this attribute.
`OperState[0..1] noNotification readOnly`	`operationalState` The operational status of this SNMP target.
`uint32`	`port = 162` UDP port number for this SNMP trap target.
`string key mandatory noNotification restricted`	`snmpTargetV1Id` The value component of the RDN.

class SnmpTargetV1

class SnmpTargetV2C

ManagedElement

+-SystemFunctions

+-SysM

+-Snmp

+-SnmpTargetV2C

An SNMP target defines a Trap receiver and gives access privileges.
This class, defines V2C protocol attributes

Attributes
`IPAddress mandatory`	`address` Host address (or DNS name) for the SNMP Trap target.
`BasicAdmState`	`administrativeState = UNLOCKED` Administrative state for the SNMP target. When LOCKED, for this MO instance traps will not be sent and access is not allowed.
`SnmpCommunity mandatory`	`community` The SNMP community string.
`uint32`	`informRetryCount = 1` The number of retries to be attempted when a response is not received for a notification. This value has only relevance if transportMethod is set to INFORM.
`Timeout`	`informTimeout = 300` Timeout for SNMP INFORM. When an SNMP INFORM is not acknowledged within this time period, an implementation may assume that the notification has not been delivered. This value has only relevance if transportMethod is set to INFORM. The unit is centisecond (0.01 seconds).
`boolean`	`isMibWritable = true` Specifies if the user has write access to MIB or not. If false, the user is only allowed to perform read access (SNMP GET etc.) The value of this attribute has no relevance if there is a SnmpViewV2C for the community of this instance. The permissions in the view will then override this attribute.
`OperState noNotification readOnly`	`operationalState` The operational status of this SNMP target.
`uint32`	`port = 162` UDP port number for this SNMP trap target.
`string key mandatory noNotification restricted`	`snmpTargetV2CId` The value component of the RDN.
`NotifyType`	`transportMethod = TRAP` The type of method to use, can be TRAP or INFORM.

class SnmpTargetV2C

class SnmpTargetV3

ManagedElement

+-SystemFunctions

+-SysM

+-Snmp

+-SnmpTargetV3

An SNMP target defines a Trap receiver and gives access privileges.
This class, defines V3 USM protocol attributes.

Attributes
`IPAddress mandatory`	`address` Host address (or DNS name) for the SNMP Trap target.
`BasicAdmState`	`administrativeState = UNLOCKED` Administrative state for the SNMP target. When LOCKED, for this MO instance traps will not be sent and access is not allowed.
`EcimPassword mandatory`	`authKey` The authentication key used for signing SNMP notifications. Authentication is performed by using a user's authKey to sign the messages being sent. Note that the length of the key must be at least 8 characters. This value attribute has only relevance if authorization is enabled (see attribute snmpSecurityLevel).
`AuthProtocol`	`authProtocol = MD5` The authentication protocol used. This value attribute has only relevance if authorization is enabled (see attribute snmpSecurityLevel).
`uint32`	`informRetryCount = 1` The number of retries to be attempted when a response is not received for a notification. This value has only relevance if transportMethod is set to INFORM.
`Timeout`	`informTimeout = 300` Timeout for SNMP INFORM. When an SNMP INFORM is not acknowledged within this time period, an implementation may assume that the notification has not been delivered. This value has only relevance if transportMethod is set to INFORM. The unit is centisecond (0.01 seconds).
`boolean`	`isMibWritable = true` Specifies if the user has write access to MIB or not. If false, the user is only allowed to perform read access (SNMP GET etc.). The value of this attribute has no relevance if there is a SnmpViewV3 for the user of this instance. The permissions in the view will then override this attribute.
`OperState[0..1] noNotification readOnly`	`operationalState` The operational status of this SNMP target.
`uint32`	`port = 162` UDP port number for this SNMP trap target.
`EcimPassword mandatory`	`privKey` Privacy key used for encryption. Encryption is performed by using a user's privKey to encrypt the data portion of the message being sent. Note that the length of the key must be at least 8 characters. This value attribute has only relevance if privacy is enabled (see attribute snmpSecurityLevel).
`PrivProtocol`	`privProtocol = DES` The privacy protocol used. This value attribute has only relevance if privacy is enabled (see attribute snmpSecurityLevel).
`SecurityLevel`	`snmpSecurityLevel = AUTH_PRIV` The SNMP security level.
`string key mandatory noNotification restricted`	`snmpTargetV3Id` The value component of the RDN.
`NotifyType`	`transportMethod = TRAP` The type of method to use, can be TRAP or INFORM.
`SnmpSecurityName mandatory`	`user` The SNMP V3 user name for the SNMP V3 message.

class SnmpTargetV3

class SnmpTargetV3Dtls

ManagedElement

+-SystemFunctions

+-SysM

+-Snmp

+-SnmpTargetV3Dtls

An SNMP target defines a Trap receiver and gives access privileges.
This class, defines attributes needed for SNMP over DTLS. The attributes nodeCredential and trustCategory defined in the Snmp MO class/instance are used. DTLS is used as transport protocol both for incoming requests, outgoing responses and SNMP notifications.

Attributes
`IPAddress mandatory`	`address` Host address (or DNS name) for the SNMP Trap target.
`BasicAdmState`	`administrativeState = UNLOCKED` Administrative state for the SNMP target. When LOCKED, for this MO instance traps will not be sent and access is not allowed.
`uint32`	`informRetryCount = 1` The number of retries to be attempted when a response is not received for a notification. This value has only relevance if transportMethod is set to INFORM.
`Timeout`	`informTimeout = 300` Timeout for SNMP INFORM. When an SNMP INFORM is not acknowledged within this time period, an implementation may assume that the notification has not been delivered. This value has only relevance if transportMethod is set to INFORM. The unit is centisecond (0.01 seconds).
`boolean`	`isMibWritable = true` Specifies if the user has write access to MIB or not. If false, the user is only allowed to perform read access (SNMP GET etc.). The value of this attribute has no relevance if there is a SnmpViewV3 for the user of this instance. The permissions in the view will then override this attribute.
`OperState[0..1] noNotification readOnly`	`operationalState` The operational status of this SNMP target.
`uint32`	`port = 10162` UDP port number for this SNMP trap target.
`string key mandatory noNotification restricted`	`snmpTargetV3DtlsId` The value component of the RDN.
`NotifyType`	`transportMethod = TRAP` The type of method to use, can be TRAP or INFORM.
`SnmpSecurityName mandatory`	`user` The SNMP V3 user name. The user name is used for authorization of incoming SNMP requests. The user name is defined by the subject alternative name field of the certificate provided by the client at the DTLS session setup.

class SnmpTargetV3Dtls

class SnmpViewV1

ManagedElement

+-SystemFunctions

+-SysM

+-Snmp

+-SnmpViewV1

An SNMP view gives users access to SNMP MIBs.
This class explicitly defines a view for one or several SNMP V1 users. A user is identified by a community name.

Communities that are not configured in any view, are by default given access to the following SNMP MIBs:
- Ericsson Alarm MIB
- SNMP-FRAMEWORK-MIB
- MIB-2

The default denies access to other SNMP MIBs. An explicit view configuration must be created if this default behaviour is not sufficient.

Attributes
`string[0..]`	`community` The SNMP V1 communities that this view shall be applied on. If a specific community is set in more than one V1 view, the user will get access to the sum of the views. The information in this object will override the attribute isMibWriteable in all SnmpTargetV1 for these communities.
`SnmpOid[0..]`	`readOids` Defines which SNMP OIDs the user is allowed to read. The defined OIDs and all their contained OIDs will be readable.
`string key mandatory noNotification restricted`	`snmpViewV1Id` The value component of the RDN.
`SnmpOid[0..]`	`writeOids` Defines which SNMP OIDs the user is allowed to write. The defined OIDs and all their contained OIDs will be writeable.

class SnmpViewV1

class SnmpViewV2C

ManagedElement

+-SystemFunctions

+-SysM

+-Snmp

+-SnmpViewV2C

An SNMP view gives users access to SNMP MIBs.
This class explicitly defines a view for one or several SNMP V2C users. A user is identified by a community name.

Communities that are not configured in any view, are by default given access to the following SNMP MIBs:
- Ericsson Alarm MIB
- SNMP-FRAMEWORK-MIB
- MIB-2

The default denies access to other SNMP MIBs. An explicit view configuration must be created if this default behaviour is not sufficient.

Attributes
`string[0..]`	`community` The SNMP V2C communities that this view shall be applied on. If a specific community is set in more than one V2 view, the user will get access to the sum of the views. The information in this object will override the attribute isMibWriteable in all SnmpTargetV2C for these communities.
`SnmpOid[0..]`	`readOids` Defines which SNMP OIDs the user is allowed to read. The defined OIDs and all their contained OIDs will be readable.
`string key mandatory noNotification restricted`	`snmpViewV2CId` The value component of the RDN.
`SnmpOid[0..]`	`writeOids` Defines which SNMP OIDs the user is allowed to write. The defined OIDs and all their contained OIDs will be writeable.

class SnmpViewV2C

class SnmpViewV3

ManagedElement

+-SystemFunctions

+-SysM

+-Snmp

+-SnmpViewV3

An SNMP view gives users access to SNMP MIBs.
This class explicitly defines a view for one or several SNMP V3 users. A user is identified by a user name.

Users that are not configured in any view, are by default given access to the following SNMP MIBs:
- Ericsson Alarm MIB
- SNMP-FRAMEWORK-MIB
- MIB-2

The default denies access to other SNMP MIBs. An explicit view configuration must be created if this default behaviour is not sufficient.

Attributes
`SnmpOid[0..]`	`readOids` Defines which SNMP OIDs the user is allowed to read. The defined OIDs and all their contained OIDs will be readable.
`string key mandatory noNotification restricted`	`snmpViewV3Id` The value component of the RDN.
`string[0..]`	`user` The SNMP V3 users that this view shall be applied on. If a specific user is defined in more than one V3 view, the user will get access to the sum of the views. The information in this object will override the attribute isMibWriteable in all SnmpTargetV3 for these users.
`SnmpOid[0..]`	`writeOids` Defines which SNMP OIDs the user is allowed to write. The defined OIDs and all their contained OIDs will be writeable.

class SnmpViewV3

class Ssh

ManagedElement

+-SystemFunctions

+-SecM

+-Ssh

Configures system-wide properties of Secure Shell Transport Layer Protocol (SSH).

This MO is created by the system.

Attributes
`SshAlgorithm[1..] mandatory`	`selectedCiphers` The list of selected ciphers. The ciphers are offered to the SSH peer in the order as configured. Each value indicates one cipher.
`SshAlgorithm[1..] mandatory`	`selectedKeyExchanges` The list of selected key exchange algorithms. The algorithms are offered to the SSH peer in the order as configured. Each value indicates one algorithm.
`SshAlgorithm[1..] mandatory`	`selectedMacs` The list of selected message authentication codes. The algorithms are offered to the SSH peer in the order as configured. Each value indicates one coding algorithm.
`string key mandatory noNotification restricted`	`sshId` The value component of the RDN.
`SshAlgorithm[1..] readOnly`	`supportedCiphers` Lists the supported encryption ciphers.
`SshAlgorithm[1..] readOnly`	`supportedKeyExchanges` Lists the supported key exchange algorithms.
`SshAlgorithm[1..] readOnly`	`supportedMacs` Lists the supported message authentication codes.

class Ssh

class SwInventory

ManagedElement

+-SystemFunctions

+-SwInventory

+-SwItem [0..]

+-SwVersion [0..]

A singleton class which has only structural purpose.

This MO is created by the system.

References to:: SwVersion;

Attributes
`SwVersion[1..] readOnly`	`active` A reference to the active software version of a software domain. The software of a managed element can be stuctured into more than one software domain. The active software version(s) control the behavior of the managed element .
`string key mandatory noNotification restricted`	`swInventoryId` The value component of the RDN.
`string[0..1]`	`userLabel` A label for free usage.

class SwInventory

class SwItem

ManagedElement

+-SystemFunctions

+-SwInventory

+-SwItem

A software item holds information about an executable software product.
A software item can also represent a container product that contains other software items, which represents a subordinate container and/or executable software products.

This MO is created by the system.

References from:: SwItem; SwVersion;
References to:: SwItem;

Attributes
`string[0..1] readOnly`	`additionalInfo` Describes any additional relevant aspects of the software item.
`ProductData[0..1] readOnly`	`administrativeData` The product identification of the software item.
`SwItem[0..] readOnly`	`consistsOf` Describes a hierarchical relationship between software items. An empty value indicates that current software item is not a container that includes subordinate software items.
`string key mandatory noNotification restricted`	`swItemId` The value component of RDN.
`string[0..1]`	`userLabel` A label for free usage.

class SwItem

class SwVersion

ManagedElement

+-SystemFunctions

+-SwInventory

+-SwVersion

An MO of this class represents the software version of a domain of the software.
If there is only one software domain, then the MO represents the overall version of the managed element.

This MO is created by the system.

References from:: SwInventory;
References to:: SwItem;

Attributes
`ProductData[0..1] readOnly`	`administrativeData` The product identification of the software version.
`SwItem[0..] readOnly`	`consistsOf` List of references to the software items the software version consists of.
`string key mandatory noNotification restricted`	`swVersionId` The value component of the RDN.
`DateTime[0..1] readOnly`	`timeOfActivation` Indicates the time when the software version was activated. If no time is presented, then current software version has not been activated.
`DateTime[0..1] readOnly`	`timeOfDeactivation` Indicates the time when the software version was deactivated. If no time is presented, then current software version has not been deactivated.
`DateTime[0..1] readOnly`	`timeOfInstallation` Indicates the time the software version was installed.
`string[0..1]`	`userLabel` A label for free usage.

class SwVersion

class SysM

ManagedElement

+-SystemFunctions

+-SysM

+-CliSsh [0..1]

+-CliTls [0..1]

+-CrM [1..1]

+-NetconfSsh [0..1]

+-NetconfTls [0..1]

+-NtpServer [0..]

+-Schema [2..]

+-Snmp [1..1]

+-TimeM [1..1]

This is the System Management MO.

It is a parent to the MOs which represent the system level functions such as time handling and version handling as well as file transfer capabilities and netconf configuration.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`sysMId` The value component of the RDN. It is set automatically when the MO instance is created.
`string[0..1]`	`userLabel` An additional descriptive text.

class SysM

class SystemFunctions

ManagedElement

+-SystemFunctions

+-BrM [1..1]

+-FileM [1..1]

+-Fm [1..1]

+-Lm [1..1]

+-Pm [1..1]

+-SecM [1..1]

+-SwInventory [1..1]

+-SysM [1..1]

This model has a purpose to group the management of the system functions of the Managed Element.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`systemFunctionsId` Holds the name used when identifying the MO.

class SystemFunctions

class ThresholdMonitoring

ManagedElement

+-SystemFunctions

+-FileM

+-FileGroupPolicy

+-ThresholdMonitoring

Specifies a threshold for housekeeping files in a file group.

Attributes
`HousekeepingAspect[0..1]`	`monitoredAspect = SIZE` Defines the aspect this monitor monitors. There will be no monitoring if the aspect is unset. Possible values are: SIZE \| QUANTITY
`uint32 mandatory`	`thresholdHigh` Defines the upper threshold for the configured monitored aspect. A new alarm must be sent or an existing alarm must change severity if the monitored value has reached or exceeded this threshold. The alarm must change severity if there is another MO of the same monitored aspect with a higher threshold value than this MO. The unit of the configured value depends on the selected monitored aspect. SIZE is given in kilobytes (kB) and QUANTITY has no unit.
`uint32 mandatory`	`thresholdLow` Defines the lower threshold for the configured monitored aspect. If there is an outstanding alarm, it must change severity or be cleared when the monitored value has reached or fallen below this threshold. The alarm must be cleared if there is no other MO of the same monitored aspect with a lower threshold value. Otherwise, it is only permitted to send a new alarm with lower severity. The unit of the configured value depends on the selected monitored aspect. SIZE is given in kilobytes (kB) and QUANTITY has no unit.
`string key mandatory noNotification restricted`	`thresholdMonitoringId` Value component of the RDN.
`Severity[0..1]`	`thresholdSeverity = WARNING` Severity of the alarm associated with this monitor. Possible values are: WARNING \| MINOR \| MAJOR \| CRITICAL
`string[0..1]`	`userLabel` Label for free use.

class ThresholdMonitoring

class TimeM

ManagedElement

+-SystemFunctions

+-SysM

+-TimeM

+-DateAndTime [1..1]

+-Ntp [1..1]

Time management concerns the calendar date and local time of the node.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`timeMId` The value component of the RDN.

class TimeM

class Tls

ManagedElement

+-SystemFunctions

+-SecM

+-Tls

Configures system-wide properties of Transport Layer Security (TLS).

This MO is created by the system.

Attributes
`CipherList`	`cipherFilter = kEECDH:kEDH:kRSA:!kPSK:!aPSK:!aDSS:!aNULL:!NULL:!SEED:!3DES:!DES:!MD5:!RC4:!CAMELLIA` Specifies a filter for the cipher suite list. Applied on the cipher suites listed in attribute supportedCiphers. The result is shown in attribute enabledCiphers.
`Cipher[0..] nonUnique readOnly`	`enabledCiphers` Lists the cipher suites as filtered by the attribute cipherFilter. Cipher suites are ordered by strength. The strongest cipher suite is offered first.
`Cipher[0..] nonUnique readOnly`	`supportedCiphers` Lists the cipher suites supported by the ME.
`string key mandatory noNotification restricted`	`tlsId` The value component of the RDN.

class Tls

class Transport

ManagedElement

+-Transport

This is a container for common transport functions used within the Managed Element.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`transportId` Holds the name used when identifying the MO.

class Transport

class TrustCategory

ManagedElement

+-SystemFunctions

+-SecM

+-CertM

+-TrustCategory

Represents a group of trusted certificates that can be referenced by Credential Users on the ME.

References from:: TrustedCertificate;
References to:: ManagedObject; TrustedCertificate;

Attributes
`ManagedObject[0..] nonUnique noNotification readOnly`	`reservedByUser` Indicates the users of this TrustCategory MO. The users are identified by Distinguished Names of Credential User Managed Objects.
`string key mandatory noNotification restricted`	`trustCategoryId` The value component of the RDN.
`TrustedCertificate[1..] nonUnique mandatory`	`trustedCertificates` The list of trusted certificates that belongs to this trust category. Contains the Distinguished Names of the TrustedCertificate Managed Objects.
`string[0..1]`	`userLabel` An additional descriptive text.

class TrustCategory

class TrustedCertificate

ManagedElement

+-SystemFunctions

+-SecM

+-CertM

+-TrustedCertificate

Represents a trusted certificate.

This MO is created by the system.

References from:: CertM; EnrollmentAuthority; TrustCategory;
References to:: TrustCategory;

Attributes
`CertificateContent[0..1] readOnly`	`certificateContent` The X.509 content of the certificate.
`CertificateState[0..1] readOnly`	`certificateState` The current state of the certificate.
`ManagedCertificateState`	`managedState = ENABLED` The state of the trusted certificate set by the MS. If set to ENABLED, the certificate is trusted and the state of the certificate is represented by certificateState. If set to DISABLED, the trusted certificate is quarantined, and thus the trust relationship is suspended.
`TrustCategory[0..] nonUnique noNotification readOnly`	`reservedByCategory` Indicates the trust categories this trusted certificate belongs to. Contains the Distinguished Names of the TrustCategory Managed Objects.
`string key mandatory noNotification restricted`	`trustedCertificateId` The value component of the RDN.

class TrustedCertificate

class UserManagement

ManagedElement

+-SystemFunctions

+-SecM

+-UserManagement

+-LocalAuthorizationMethod [1..1]

User Management MOC.

This MO is created by the system.

Attributes
`string[0..1]`	`legalNotice = IF YOU ARE NOT AN AUTHORIZED USER, PLEASE EXIT IMMEDIATELY` The legal notice presented to the user when starting an O&M session. The message is presented to the client before authentication takes place. Depends on the client capability and configuration if the message is presented to the O&M user. The O&M user may receive this information before authentication if the authentication is password based; otherwise, it is perceived as post-authentication message. The purpose of the message is to warn the user about the consequences of unauthorized access. No value means there is no legal notice.
`uint8[0..1]`	`loginFailureDelay = 5 { 1..255 }` Delay after a failed login attempt in seconds. No value means no delay. Unit: 1 seconds
`string[0..] nonUnique`	`targetType` Lists the target types of the ME for Target Based Access Control (TBAC). This attribute is optional for Authentication Methods that require TBAC configuration. Authentication Methods use TBAC to determine the following: whether a user can be authorized in the ME, and which authorization profiles apply to the user in the ME, based on the target types specified in this attribute. This attribute can contain any classifier string for the ME such as geographical, for example: 'stockholm', network, for example 'ims', or functional identifiers, for example 'cscf', and any combination of these. The generic behavior of TBAC for authorization is as follows: TBAC is LOCKED in the ME: authorization is performed without TBAC. TBAC is UNLOCKED in the ME: authorization is performed if the targets that the user is provided with exactly match at least one string of configured target types. Otherwise, authorization fails. Determining the authorization profiles of the user is specific per Authentication Method. The LOCKED and UNLOCKED states of TBAC in the ME are controlled by the Authentication Methods. Example value: 'cscf.ims.stockholm'. Valid values: ^(\\\\[a-fA-F0-9]{2}\|[A-Za-z0-9!$%&'./:=?@^_`{\|}~-])((\\\\[a-fA-F0-9]{2}\|[A-Za-z0-9!$%&'./:=?@^_`{\|}~# -])*(\\\\[a-fA-F0-9]{2}\|[A-Za-z0-9!$%&'./:=?@^_`{\|}~#-]))?$
`string[0..1]`	`userLabel` An additional descriptive text.
`string key mandatory noNotification restricted`	`userManagementId` The value component of the RDN.

class UserManagement

class WebServiceEndPoint

ManagedElement

+-PolicyControlFunction

+-Network

+-WebServiceEndPoints

+-WebServiceEndPoint

+-WsDestination [0..]

Container that holds web service end point generic configuration data.
The data is common to all WsDestination objects that are part of it.

Attributes
`int32[0..1]`	`connectionTimeout = 5000` It represents the maximum time (in milliseconds) waiting for a HTTP request to be acknowledged.
`int32[0..1]`	`maxNumberRetries = 1` It represents the maximum number of retries of a HTTP request. A retry is performed when sending a SOAP message to a web service end point destination node fails.
`string mandatory`	`soapAction` It represents the SOAP Action HTTP request header. The value must be an URI (Uniform Resource Identifier) identifying the intent of the SOAP HTTP request.
`string key mandatory noNotification restricted`	`webServiceEndPointId` Identifies the instance of this class. It is the administrative identifier of the WebServiceEndPoint.

class WebServiceEndPoint

class WebServiceEndPoints

ManagedElement

+-PolicyControlFunction

+-Network

+-WebServiceEndPoints

+-WebServiceEndPoint [0..]

Container for web service end point related configuration classes.

This MO is created by the system.

Attributes
`string key mandatory noNotification restricted`	`webServiceEndPointsId` Identifies the instance of this class. Fixed value = 1.

class WebServiceEndPoints

class WsDestination

ManagedElement

+-PolicyControlFunction

+-Network

+-WebServiceEndPoints

+-WebServiceEndPoint

+-WsDestination

It represents a web service end point destination (HTTP server) node.
The SAPC communicates directly with it.

Attributes
`string[0..1]`	`httpProxy` If a HTTP proxy node is used, it represents the URL of the proxy node. The proxy node is located between the SAPC and the web service end point destination node.
`string key mandatory noNotification restricted`	`wsDestinationId` Identifies the instance of the class. It represents the URL address of the web service end point destination node.

class WsDestination

Managed Object Model (MOM)

All PM Counters

Contents

Managed Object Model

(MOM)