Contents
| 1 | Alarm Description |
2 | Procedure |
| 2.1 | Handle Alarm Policy Control, Geographical Redundancy Unable To Reach Peer |
1 Alarm Description
The SAPC raises this alarm when it detects a communication failure with the peer.
The SAPC clears this alarm when it detects that the communication with the peer is re-established.
The possible causes of this alarm are:
The main attributes of the alarm are the following:
|
Attribute Name |
Attribute Value |
|---|---|
|
Alarm Type Id |
GeographicalRedundancyUnableToReachPeer |
|
Major Type |
193 |
|
Minor Type |
7077898 |
|
Specific Problem |
Policy Control, Geographical Redundancy Unable To Reach Peer. |
|
Severity |
Major |
|
Source |
ManagedElement=1,PolicyControlFunction=1,GeoRedManager=1,TrafficChannel or ManagedElement=1,PolicyControlFunction=1,GeoRedManager=1,ReplicationChannel |
|
Probable Cause |
100505 |
|
Event Type |
Communications |
|
Additional Text |
"Communication failed with <IP>:<Port>" |
|
Last Event Time |
YYYY-MM-DDTHH:mm:ss<time zone> |
2 Procedure
2.1 Handle Alarm Policy Control, Geographical Redundancy Unable To Reach Peer
Prerequisites
- Before starting this procedure, ensure that you have
read the following documents:
- Active-Standby Geographical Redundancy or Active-Active Geographical Redundancy.
- For information about Fault Management, refer to Fault Management.
- Before starting this procedure, ensure that the following
tool is available:
- Ericsson Command-Line Interface (ECLI).
- No conditions are required.
Steps
- Check the network IP connectivity between the SAPC nodes.
- Navigate to class GeoRedManager object:
>dn ManagedElementId=1,PolicyControlFunction=1,GeoRedManager=1
- Execute showConfiguration action:
(ManagedElement=1,PolicyControlFunction=1,GeoRedManager=1)>showConfiguration
- Verify the values of Local IP and Peer IP attributes.
- If the alarm does not cease, consult the next level of maintenance support. Further actions are outside the scope of this procedure.