Contents
1 Alarm Description
This alarm is raised when the number of Rx session rejections exceeds its corresponding configured threshold value.
The alarm is associated to the rxAaasFailed measure and Dynamic Policy Control function.
The main attributes of the alarm are the following:
|
Attribute Name |
Attribute Value |
|---|---|
|
Alarm Type Id |
RxSessionsFailedReached |
|
Major Type |
193 |
|
Minor Type |
7077894 |
|
Specific Problem |
Policy Control, Number of Rx Failed Sessions Reached. |
|
Severity |
Minor |
|
Source |
ManagedElement=1,SystemFunctions=1,Pm=1,PmJob=policyControlFunctionThresholdsJob,MeasurementReader=rxAaasFailed_mr:PolicyControlFunction=1,Network=1,DiameterNodes=1,DiameterNode=<diameterNodeId> |
|
Probable Cause |
100549 |
|
Event Type |
Quality of Service |
|
Additional Text |
The number of Rx failed requests in a specific given granularity period exceeds the configured threshold value |
|
Last Event Time |
YYYY-MM-DDTHH:mm:ss<time zone> |
2 Procedure
2.1 Handle Alarm Policy Control, Number of Rx Failed Sessions Reached
Prerequisites
- Before starting this procedure, ensure that you have
read the following documents:
- For information about Fault Management, refer to Fault Management.
- Before starting this procedure, ensure that the following
tool is available:
- Ericsson Command Line Interface (ECLI).
- No conditions are required.
Steps
- Check that the threshold (thresholdHigh and thresholdLow attributes of the object indicated by source alarm field before ":" character) is configured according to the needs. More information in Measurements.
- Check the configuration of Service Access Control for dynamic services, refer to Configuration Guide for Dynamic Policy Control (Rx).
- If the alarm does not cease, consult the next level of maintenance support. Further actions are outside the scope of this procedure.