Contents

1   Description

This instruction describes how to configure a set of target types for a Managed Element (ME). The value of the targetType attribute can be used by, for example, Target-Based Access Control (TBAC).

2   Procedure

2.1   Add A Target Type Identifier

Prerequisites

• No documents are required.
• No tools are required.
• The following conditions must apply:
  • The user has the System Security Administrator role.
  • An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

Steps

1. Navigate to the UserManagement managed object, for example:

   >dn ManagedElement=1,SystemFunctions=1,SecM=1,UserManagement=1

2. Enter Config mode:

   (UserManagement=1)>configure

3. Add a target type identifier in attribute targetType, for example:

   (config-UserManagement=1)>targetType="Stockholm"

4. Commit the settings:

   (config-UserManagement=1)>commit

5. Verify the targetType:

   (UserManagement=1)>show targetType

   The following is an example output:

   targetType "Stockholm" "Uppsala"

2.2   Delete A targetType Identifier

Steps

1. Navigate to the UserManagement managed object, for example:

   >dn ManagedElement=1,SystemFunctions=1,SecM=1,UserManagement=1

2. Enter Config mode:

   (UserManagement=1)>configure

3. Delete an identifier in targetType, for example:

   (config-UserManagement=1)>no targetType="Uppsala"

4. Commit the settings:

   (config-UserManagement=1)>commit

5. Verify the targetType:

   (UserManagement=1)>show targetType

   The following is an example output:

   targetType "Stockholm"

2.3   Delete All targetType Identifiers

Steps

1. Navigate to the UserManagement managed object, for example:

   >dn ManagedElement=1,SystemFunctions=1,SecM=1,UserManagement=1

2. Enter Config mode:

   (UserManagement=1)>configure

3. Delete all identifiers in targetType, for example:

   (config-UserManagement=1)>no targetType

4. Commit the settings:

   (config-UserManagement=1)>commit

5. Verify the targetType:

   (UserManagement=1)>show targetType

   The following is an example output:

   targetType=[]