class LdeBondingConf

LdeBondingConf

Set driver parameters for the specified bonding interface. The bonding mode should be set at the interface definition

Attributes
`Enum012[0..1]`	`adSelect` 0 \| 1 \| 2
`Enum01[0..1]`	`allSlavesActive` 0 \| 1
`IPv4v6Address[0..]`	`arp` Switches to Address Resolution Protocol (ARP) monitoring for a bonding interface.
`uint32[0..1]`	`arpInterval` Specifies the ARP link monitoring frequency in milliseconds.
`Enum0123[0..1]`	`arpValidate` Specifies whether or not ARP probes and replies should be validated in the active-backup mode. (0 \| 1 \| 2 \| 3)
`string key mandatory noNotification restricted`	`bondingId` bondingId=interface
`uint32[0..1]`	`downdelay` Specifies the time, in milliseconds, to wait before disabling a slave after a link failure has been detected.
`Enum012[0..1]`	`failOverMac` 0 \| 1 \| 2
`Enum01[0..1]`	`lacpRate` 0 \| 1
`uint32[0..1]`	`miimon` Specifies the MII link monitoring frequency in milliseconds.
`Uint0255[0..1]`	`numGratArp` 0-255
`string[0..1]`	`primary` Specifies which slave is the primary device to use.
`Enum012[0..1]`	`primaryReselect` 0 \| 1 \| 2
`Uint0255[0..1]`	`resendIgmp` 0-255
`uint32[0..1]`	`updelay` Specifies the time, in milliseconds, to wait before enabling a slave after a link recovery has been detected.
`Enum01[0..1]`	`useCarrier` 0 \| 1
`Enum012[0..1]`	`xmitHashPolicy` 0 \| 1 \| 2