Contents

1   Introduction

This document covers the massive operations available through the Ericsson™ Dynamic Activation (EDA) Command Line Interface (CLI) for Service-Aware Policy Controller (SAPC) data.

Note:  

This function is only supported for layered SAPC.

1.1   Purpose and Scope

This document describes SAPC conditional search commands.

How to use these commands is covered in the document Generic CLI Interface Specification, Reference [1].

1.2   Target Group

The target group for this document is as follows:

• System Integrator

For more information regarding the different target groups, see Library Overview, Reference [2].

1.3   Typographic Conventions

Typographic conventions are described in the document Library Overview, Reference [2].

For information about abbreviations used throughout this document refer to Glossary of Terms and Acronyms, Reference [3].

2   SAPC Conditional Search Command

This section covers all SAPC conditional search commands through the Dynamic Activation CLI. All conditional search commands generate response files, rather than printing the answer directly to the client.

The following SAPC search command is available:

• Print Families and Corresponding Subscribers (PCMSFMP), see Section 2.1

2.1   Print Families and Corresponding Subscribers (PCMSFMP)

The PCMSFMP command supports massive print of the SAPC subscriptions and the SAPC families.

2.1.1   PCMSFMP Request

Command syntax:

PCMSFMP[:FAMILYID=familyid];

Examples of the PCMSFMP command

PCMSFMP;

This CLI command prints the identifiers of all families and the identifiers of their respective subscribers.

PCMSFMP:FAMILYID=family1234;

This CLI command prints the identifiers of all subscribers that belong to the family with identifier family1234.

The following table covers the attribute that can be used in a PCMSFMP request.

2.1.2   PCMSFMP Result File Schema

Example 1 is an example of the result file schema for PCMSFMP:

<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
   targetNamespace="http://schemas.ericsson.com/ma/SAPC/" elementFormDefault="qualified"
   attributeFormDefault="qualified">
  <xs:element name="SAPCFamilyMemberData">
    <xs:complexType>
      <xs:sequence>
        <xs:element name="SAPCFamily" minOccurs="0" maxOccurs="unbounded">
          <xs:complexType>
            <xs:sequence>
              <xs:element name="pcFamilyId" type="xs:string" />
              <xs:element name="pcSubscriberId" type="xs:string" minOccurs="0" maxOccurs="unbounded"/>
            </xs:sequence>
          </xs:complexType>
        </xs:element>
      </xs:sequence>
    </xs:complexType>
  </xs:element>
</xs:schema>

The following table covers the attributes that can be received in a PCMSFMP response.

3   Faults or Errors

The CLI error codes can appear both directly in the prompt, and in the result files. Besides the generic and common error codes, the CLI commands can also return some more specific error codes.

3.1   General CLI Errors

The following table covers Dynamic Activation internal error codes. They can appear in any CLI responses.

3.2   Command Mapped Errors

This section covers SAPC provisioning interface errors that are mapped towards certain commands. The commands listed in this section can be assumed to be stopping, unless "(not stopping)" is stated. They are listed in the following table along with the commands that can return them.

Reference List