Charging Provisioning over CAI3G

Ericsson Dynamic Activation 1

1	Introduction
1.1	Purpose and Scope
1.2	Target Groups
1.3	Typographic Conventions
1.4	Prerequisites
1.5	Namespaces
1.6	Legends
1.7	Operations
1.8	Web Service Interface
1.9	MOType
1.10	MOId
2	Create AIR Subscription
2.1	Request Data
2.2	Response Data
2.3	Examples
3	Get AIR Subscription
3.1	Request Data
3.2	Response Data
3.3	Examples
4	Set AIR Subscription
4.1	Request Data
4.2	Response Data
4.3	Examples
5	Delete AIR Subscription
5.1	Request Data
5.2	Response Data
5.3	Examples
6	Get AIR Offer
6.1	Request Data
6.2	Response Data
6.3	Examples
7	Set AIR Offer
7.1	Request Data
7.2	Response Data
7.3	Examples
8	Delete AIR Offer
8.1	Request Data
8.2	Response Data
8.3	Examples
9	Set AIR refill
9.1	Request Data
9.2	Response Data
9.3	Examples
10	Set AIR Communication ID
10.1	Request Data
10.2	Response Data
10.3	Examples
11	Get Accumulators
11.1	Request Data
11.2	Response Data
11.3	Examples
12	Set Accumulators
12.1	Request Data
12.2	Response Data
12.3	Examples
13	Delete Accumulators
13.1	Request Data
13.2	Response Data
13.3	Examples
14	Set AIR Run Periodic Account Management
14.1	Request Data
14.2	Response Data
14.3	Examples
15	Get AIR Capabilities
15.1	Request Data
15.2	Response Data
15.3	Examples
16	Create AF Subscription
16.1	Request Data
16.2	Examples
17	Set AF Subscription
17.1	Request Data
17.2	Examples
18	Get AF Subscription
18.1	Request Data
18.2	Response Data
18.3	Examples
19	Delete AF Subscription
19.1	Request Data
19.2	Examples
20	Create AF Identifier
20.1	Request Data
20.2	Examples
21	Set AF Identifier
21.1	Request Data
21.2	Examples
22	Get AF Identifier
22.1	Request Data
22.2	Response Data
22.3	Examples
23	Delete AF Identifier
23.1	Request Data
23.2	Examples
24	Set PredefinedOffer
24.1	Request Data
24.2	Response Data
24.3	Examples
25	Get PredefinedOffer
25.1	Request Data
25.2	Response Data
25.3	Examples
26	Delete PredefinedOffer
26.1	Request Data
26.2	Response Data
26.3	Examples
27	Faults and Errors
27.1	AIR Error Codes
27.2	AF Error Codes
27.3	CAI3G Error Message Example
Reference List

1 Introduction

This section contains information about the prerequisites, purpose, scope, and target group for the document. This section also contains information about typographic conventions used in this document.

1.1 Purpose and Scope

This document describes the supported methods for Changing System. This document also declares the types and occurrences of the attributes used in the operations.

Note:: This document is not a tutorial of CAI3G, it must be used together with document Generic CAI3G Interface 1.2, Reference [2], and CAI3G Implementation, Reference [3].

For more information about Charging System , refer to Solution Description Charging and CBiO, Reference [5].

1.2 Target Groups

The target group for this document is as follows:

System Integrator

For more information about the different target groups, see Library Overview, Reference [1].

1.3 Typographic Conventions

Typographic conventions are described in the document Library Overview, Reference [1].

1.4 Prerequisites

To use this document fully, users must meet the following prerequisites:

Basic knowledge about the Ericsson™ Dynamic Activation (EDA) product
Basic knowledge about the IMS solution
Knowledge about Generic CAI3G Interface 1.2, Reference [2]

1.5 Namespaces

The following namespaces are referred to in this document:

CAI3G 1.2 namespace:
http://schemas.ericsson.com/cai3g1.2/
Provisioning namespaces:
http://schemas.ericsson.com/ma/CS/AIR/

http://schemas.ericsson.com/ma/CS/AF/

1.6 Legends

The following table shows the legends used in Extensible Markup Language (XML) schema figures in this specification.

Table 1 Legends Used in XML Schema Figures in This Specification
Legend	Description
	XML attribute
	Optional XML element
	Mandatory XML element
	Structured element
	Subobject element The occurrence of this element is 0–15
	User-defined type This is not a standard XML schema type. It is introduced to describe Managed Object (MO) schema structure more clearly. In practice, this type is to be replaced by the corresponding elements.

1.7 Operations

1.7.1 AIR Service

One Managed Object (MO) with four operations are described in this document. See the following table for the commands and valid operations for AIR service:

Table 2 AIR Provisioning MOs
MO	Operation
MO	Create	Get	Set	Delete
Subscription	x	x	x	x
Offer		x	x	x
CommunicationID			x
Refill			x
Accumulators		x	x	x
Capabilities		x
PredefinedOffer		x	x	x
RunPeriodicAccountManagement			x

1.7.2 AF Service

One Managed Object (MO) with four operations are described in this document. See the following table for the commands and valid operations for AF service:

Table 3 AF Provisioning MOs
MO	Operation
MO	Create	Get	Set	Delete
Subscription	x	x	x	x
Identifier	x	x	x	x

1.8 Web Service Interface

The Web Services Definition Language (WSDL) and XML Schema Definition Language (XSD) files that describe the provisioning interface can be retrieved by following below instruction:

Save the zip file, Multi_Activation_WSDL_ and_ XSD_ files.zip, to a local folder.
Extract the zip file.
Check the InterfacesPGNGN directory for PG NGN-related interfaces.

1.9 MOType

MOType is a plain text string based on the type xs:string. An MOType consists of two parts. One is the namespace of the MO, and the other is the MO name string that is always starting with an alphabetical character in either upper or lower case, followed by zero or more alphabetical characters, digits or underscores.

Those two parts are connected with symbol @. The syntax of the MOType string is MO_Name@MO_Namespace. The name string of an MOType must follow the regular expression: [A-Za-z][A-Za-z0-9]*

The MO name together with the MO namespace must be globally unique.

1.10 MOId

MOId is an XML fragment containing the MOId parameter-value pairs that are used to identify an MO instance in the interface data model. CAI3G 1.2 standard supports compound MO identifiers or multiple MO identifier. The following is an example of an MOId:

Example 1 Example of MOId

<MOId>
   <msisdn>46455395000</msisdn>
   <imsi>46234563545000</imsi>
</MOId>

The MOId is defined as a sequence of xs:any element in CAI3G schema file. It is the developers responsibility to define the real schema for this parameter.

The MOId is also the key attributes that must be defined in the top-level element, CreateMODefinition or SetMODefinition, within MOAttributes parameter.

Each implementation of CAI3G interface is to define own logic relationship of MOId. It is also the CAI3GAgents responsibility to interpret this parameter correctly by either the hard-coded logic or the dynamic parsing of the schema.

2 Create AIR Subscription

This section covers the AIR command createSubscription.

MOType

Subscription@http://schemas.ericsson.com/ma/CS/AIR/

2.1 Request Data

2.1.1 Parameters

MOId

Table 4 Create Subscription MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by `subscriberNumberNAI` parameter.

MOAttributes

Table 5 covers the parameters that can be used in a createSubscription request.

Table 5 Create Subscription Parameters
Parameter				Type	Occurrence	Description
originNodeType				String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName				String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID				String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill. If this parameter is absent from the request, Dynamic Activation will generate System time (in milliseconds) plus seven random digital numbers as the parameter to NEs.
originTimeStamp				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation. If this parameter is absent from the request, Dynamic Activation will generate PGN system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer toUser Guide for Resource Activation, Reference [4] for details of Activation Logic
subscriberNumberNAI				Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Mandatory	The Nature of Address Indicator identifies the format of the `subscriberNumber` parameter.
subscriberNumber				String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by `subscriberNumberNAI` parameter.
originOperatorID				String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate PGN system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic
serviceClassNew				Integer, 0 - 9999	Optional (0-1)	New service class for the refill.
temporaryBlockedFlag				Boolean {0, 1} 0 (false) = Default value. Unblocked 1 (true) = Temporary blocked	Optional (0-1)	Indicate whether the subscriber and operator has access to subscriber and account data. A temporary blocked subscriber does not have access to the account, and any messages requesting changes in the account or subscriber data are rejected. Therefore in case temporary blocked is set, a temporary blocked indication is set in the response code of the response message and the action is rejected. It is always possible to read data, but the only way to change data again is to unblock the subscriber.
languageIDNew				Integer, 1 - 4 1 = Operator specific language 1 2 = Operator specific language 2 3 = Operator specific language 3 4 = Operator specific language 4	Optional (0-1)	The new preferred language of the subscriber.
ussdEndOfCallNotificationID				Integer, 0 - 255 0–199 = As defined in the tariff trees 200–254 = Reserved 255 = No ID assigned (clears previously assigned ID)	Optional (0-1)	This parameter identifies which decision tree to use, when selecting the appropriate USSD text string for the End of Call Notification message to the subscriber.
accountGroupID				Integer, 0 – 2147483647	Optional (0-1)	The Account Group identity for the account. 0 indicate clearing of account group (when set to 0 the account does not belong to any account group).
serviceOfferings				Sub-MO	Optional (0-n)	The values of the service offerings defined on an account.
	serviceOfferingID			Integer, 1 - 31	Mandatory	The identity of a current service offering defined on an account.
	serviceOfferingActiveFlag			Boolean {0, 1} 0 (false) = The service offering is not active. 1 (true) = The service offering is active.	Mandatory	Indicates whether a specific service offering pointed out by the serviceOfferingID parameter is active or not.
serviceOfferingsValue					Optional (0-1)	The value of service offerings
promotionPlanID				String, 1 - 4 characters	Mandatory	The identity of one of the current promotion plans of a subscriber.
promotionStartDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Start date of the associated promotion plan.
promotionEndDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	End date of the associated promotion plan.
accountHomeRegion				Integer, 0 - 999	Optional (0-1)	The home region for the account. Zero means no home region set.
periodicAccountManagementData				Sub-MO	Optional (0-n)	Periodic account management data for a subscriber.
	pamServiceID			Integer, 0 - 99	Mandatory	The id of the periodic account management service.
	pamClassID			Integer, 0 - 9999	Mandatory	The periodic account management class used by the periodic account management service.
	scheduleID			Integer, 0 - 9999	Mandatory	The schedule that is used by the periodic account management service.
	currentPamPeriod			String, 1 - 30 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	periodic account management period that is currently used for the subscriber.
	deferredToDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The deferred to date for the Periodic Account Management service.
	pamServicePriority			Integer, 0 - 65535	Optional (0-1)	Indicate the priority between PAM services at PAM evaluation. Lower value gives higher priority.
transactionCurrency				String, Currency	Optional (0-1)	The ID to point out what currency is used for the transaction. For example, SEK, EUR, USD, etc.
accountPrepaidEmptyLimit				String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	This parameter is used to set a lowest allowed balance on an account.
masterAccountNumber				String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the master subscriber in a multi user account. The format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeros.
negotiatedCapabilities				Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
offerUpdateInformation				Sub-MO	Optional (0-n)	Offer update information for a subscriber.
	offerID			Integer, 0 - 2147483647	Mandatory	The identity of an offer.
	dateInformation			Sub-MO	Optional (0-1)	The date information of a request
		startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime.
		startDateRelative		Integer, -999 to -1 and 1 to 999	Optional (0-1)	This parameter is used to make a relative adjustment to the current start date. The adjustment can be positive or negative. It is expressed in number of days.
		startPamPeriod		Sub-MO	Mandatory	The Periodic Account Management period
			startPamPeriodIndicator	Integer, 0 - 99	Mandatory	The Periodic Account Management period when the offer and DA becomes valid. If the offer has the capability of date and time, the time stamp is set to 00:00:00 by default. Update of the PAM period indicator on an existing offer will keep the current time stamp unchanged. Time stamp can however be changed by including currentTimeOffset. Zero means the start date of an offer or a DA is the current date.
			currentTimeOffset	Boolean {0 ,1} 0 (false) = Time stamp will not be set (default value apply if applicable). 1 (true) = Time stamp will be set to the current system time.	Optional (0-1)	Indicates whether the default time or current time can be used in time stamp.
		expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		expiryDateRelative		Integer, -999 to -1 and 1 to 999	Optional (0-1)	This parameter is used to make a relative adjustment to an expiry date. The adjustment can be positive or negative. It is expressed in number of days.
		expiryPamPeriodIndicator		Integer, 1- 100 and 2147483647 2147483647 = no expiry.	Optional (0-1)	The Periodic Account Management period when the offer or DA becomes invalid. When the offer has the capability of storing date and time, the time stamp will be set to 00:00:00 or 23:59:59 depending on system configuration.
	dateTimeInformation			Sub-MO	Optional (0-1)	The date and time information
		startDateTime		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		startDateTimeRelative		Integer, -99 999 999 to 99 999 999	Optional (0-1)	This parameter is used to make a relative adjustment to the current start date and time for an offer. The adjustment can be positive or negative. It is expressed in number of seconds. The parameter may also be used to define start date and time for other entities depending on the context where it is used.
		expiryDateTime		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Element Value Range: DateMin to DateMax or DateInfinite
		expiryDateTimeRelative		Integer, -99 999 999 to 99 999 999	Optional (0-1)	This parameter is used to make a relative adjustment to the current expiry date and time. The adjustment can be positive or negative. It is expressed in number of seconds. The parameter may also be used to define expiry date and time for other entities depending on the context where it is used.
	pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	offerType			Integer, 0 - 7	Optional (0-1)	Identifies the offer type.
	dedicatedAccountUpdateInformation			Sub-MO	Optional (0-n)	The information for updating balances and expiry date for dedicated accounts.
		dedicatedAccountID		Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account to distinguish between the various dedicated accounts in an array of dedicated accounts.
		productID		Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		dedicatedAccountPamPeriodInformation		Sub-MO	Optional (0-1)
			productID	Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
			adjustmentAmountRelative	String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 Unit	Optional (0-1)	The amount of the adjustment (positive or negative) to be applied to the account.
			dedicatedAccountValueNew	String, 0 -9223372036854775807 Unit	Optional (0-1)	Value to assign to a dedicated account. This is not taking in consideration any ongoing chargeable events.
			adjustmentDateRelative	Integer, -32767 to -1 and 1 to 32767	Optional (0-1)	This parameter is used to make a relative adjustment to the current expiry date. The adjustment can be positive or negative. It is expressed in number of days.
			expiryDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			expiryPamPeriodIndicator	Integer, 1- 100 and 2147483647 2147483647 = no expiry.	Optional (0-1)	The Periodic Account Management period when the offer or DA becomes invalid. When the offer has the capability of storing date and time, the time stamp will be set to 00:00:00 or 23:59:59 depending on system configuration.
			startDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime.
			adjustmentStartDateRelative	Integer, -999 to -1 and 1 to 999	Optional (0-1)	This parameter is used to make a relative adjustment to the current start date. The adjustment can be positive or negative. It is expressed in number of days.
			startPamPeriodIndicator	Integer, 0 - 99	Optional (0-1)	The startPamPeriodIndicator parameter indicates the Periodic Account Management period when the offer and DA becomes valid. If the offer has the capability of date and time, the time stamp will default to 00:00:00. Update of the PAM period indicator on an existing offer will keep the current time stamp unchanged. Time stamp can however be changed by including currentTimeOffset. Zero means that the start date of an offer or a DA is the current date.
			dedicatedAccountUnitType	Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
			expiryDateCurrent	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The current expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			startDateCurrent	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The current start date for a dedicated account. Used for validation. No validation is performed if omitted. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			pamServiceID	Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		updateAction		String Enumeration value="EXPIRE"	Optional (0-1)	Indicates which action to take on the resource. EXPIRE = Expire the resource immediately.
	updateAction			String Enumeration value="EXPIRE"	Optional (0-1)	Indicates which action to take on the resource. EXPIRE = Expire the resource immediately.
	productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	attributeUpdateInformation			Sub-MO	Optional (0-n)	Update information of the attribute
		attributeName		String, 1 - 128 characters	Mandatory	The name of the attribute.
		attributeUpdateAction		String Enumeration value="ADD" Enumeration value="DELETE" Enumeration value="CLEAR" Enumeration value="SET"	Mandatory	The requested action for an attribute. ADD: Add an entry to the set (for attributes storing a set of values). DELETE: Delete an entry from the set (for attributes storing a set of values). CLEAR: Clear all entries from the set (for attributes storing a set of values) or removes the value for a single value attribute. SET: Sets the value for a single value attribute. Previous value, if existing, will be overwritten.
		attributeValueString		String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
		attributeValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
		attributeValueDecimal		Sub-MO	Optional (0-1)	Information about a decimal value.
			attributeValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals	Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
		attributeValueInteger		Integer, -2147483648 to 2147483648	Optional (0-1)	The integer value of an attribute.

2.2 Response Data

2.2.1 Parameters

MOId

Table 6 Create Subscription Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by `subscriberNumberNAI` parameter.

MOAttributes

Table 7 covers the parameters that can be used in a createSubscription response.

Table 7 Create Subscription Parameters
Parameter		Type	Occurrence	Description
subscriberNumber		String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originOperatorID		String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example.
periodicAccountManagementData		Sub-MO	Optional (0-n)	Information used for periodic account management.
	pamServiceID	Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	currentPamPeriod	String, 1 - 33 characters Characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	The periodic account management period that is currently used for the subscriber.
	lastEvaluationDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date of the last periodic account management evaluation. Element Value Range: DateMin to DateMax
negotiatedCapabilities		Interger: array of <int> or <i4> 0 - 2147483647	Optional (0-n)	Indicates the negotiated capabilities between the client and server node. The capabilities are presented as a series of elements, where each element contains an integer value between 0 and 2147483647. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities		Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

2.3 Examples

2.3.1 Example of Creating a Master Subscriber

This section gives an example of the createSubscription request and response message. This example shows how to create a Master subscriber

Request Example

Example 2 Create Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/"
 xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>${Properties#sessionId}</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Create>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>55897214</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:createSubscription subscriberNumber="55897214">               
               <air:originNodeType>ADM</air:originNodeType>               
               <air:originHostName>emasa</air:originHostName>               
               <air:originTransactionID>20120304171831</air:originTransactionID>               
               <air:originTimeStamp>2005-04-22T14:15:21-06:00</air:originTimeStamp>               
               <air:subscriberNumber>55897214</air:subscriberNumber>               
               <air:originOperatorID>operator33</air:originOperatorID>               
               <air:serviceClassNew>5001</air:serviceClassNew>
               <air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
               <air:negotiatedCapabilities>256</air:negotiatedCapabilities>
               <air:offerUpdateInformation>
                  <air:offerID>513</air:offerID>
                  <air:dateInformation>                                                          
                     <air:startDateRelative>111</air:startDateRelative>
                     <air:expiryDateRelative>111</air:expiryDateRelative>                     
                  </air:dateInformation>                  
                  <air:updateAction>EXPIRE</air:updateAction>
               </air:offerUpdateInformation>
            </air:createSubscription>
         </cai3:MOAttributes>
      </cai3:Create>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 3 Create Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>037c43b769fa4dce9d5fa5d74e651abd</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <CreateResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOId>
            <air:subscriberNumber xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/"
 xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/"
 xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">55897214</air:subscriberNumber>
         </MOId>
         <MOAttributes>
            <air:createSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>55897214</air:subscriberNumber>
               <air:originTransactionID>20120304171831</air:originTransactionID>
               <air:originOperatorID>operator33</air:originOperatorID>
               <air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
               <air:negotiatedCapabilities>256</air:negotiatedCapabilities>
               <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
               <air:availableServerCapabilities>16296</air:availableServerCapabilities>
            </air:createSubscriptionResponse>
         </MOAttributes>
      </CreateResponse>
   </S:Body>
</S:Envelope>

2.3.2 Example of Creating a Subordinate Subscriber

This section gives an example of the createSubscription request and response message. This example shows how to create a subordinate subscriber

Request Example

Example 4 Create Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>f1c5d6e5bc044a908622e02c565a3a9b</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Create>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:createSubscription subscriberNumber="465273152000001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:serviceClassNew>111</air:serviceClassNew>
            </air:createSubscription>
         </cai3:MOAttributes>
      </cai3:Create>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 5 Create Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>f1c5d6e5bc044a908622e02c565a3a9b</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <CreateResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOId>
            <air:subscriberNumber xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/" 
              xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
              xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">465273152000001
            </air:subscriberNumber>
         </MOId>
         <MOAttributes>
            <air:createSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14411764631589415223</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:createSubscriptionResponse>
         </MOAttributes>
      </CreateResponse>
   </S:Body>
</S:Envelope>

3 Get AIR Subscription

This section covers the AIR command getSubscription .

MOType

Subscription@http://schemas.ericsson.com/ma/CS/AIR/

3.1 Request Data

3.1.1 Parameters

MOId

Table 8 Get Subscription MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 9 covers the parameters that can be used in a getSubscription request.

Table 9 Get Subscription Parameters
Parameter			Type	Occurrence	Description
originNodeType			String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName			String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID			String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
originTimeStamp			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation.
subscriberNumberNAI			Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
accountDetails				Optional (0-1)	A list of the account details.
	messageCapabilityFlag			Optional (0-1)	The possible actions that may be performed on the account due to an operation initiated over this protocol.
		promotionNotificationFlag	Boolean {0, 1} 0 (false) = Default value. Promotion notification code will not be cleared after delivery in response. 1 (true) = Promotion notification code will be cleared after delivery in response.	Optional (0-1)	Indicate whether the promotion notification code shall be cleared or not after delivery in response.
		firstIVRCallSetFlag	Boolean {0, 1} 0 (false) = Do not set first IVR call done flag. 1 (true) = Set first IVR call done flag.	Optional (0-1)	Indicate whether the first IVR call done flag shall be set or not.
		accountActivationFlag	Boolean {0, 1} 0 (false) = Default value. Pre-activated accounts will not be activated due to the request. Account can however be activated if service fee and supervision expiry dates are set as a result of this request. In this case neither the initial balance nor the life-cycle dates from the pre-activation configuration will not be given. 1 (true) = Pre-activated accounts may be activated due to the request. If service fee and supervision expiry dates are explicitly received in the request these days will used and initial balance will be applied (but no additional days from the pre-activation configuration will be given). If service fee and supervision expiry dates are not explicitly set in the request initial life-cycle days and initial balance will be applied.	Optional (0-1)	Indicate whether pre-activated accounts may be or will not be activated due to the request.
	requestedInformationFlags			Optional (0-1)	The elements to be returned or not returned in a response.
		requestMasterAccountBalanceFlag	Boolean {0, 1} 0 (false) = Default value. Do not return. 1 (true) = Return.	Optional (0-1)	Indicate whether the currency1, accountValue1, aggregatedBalance1, currency2, accountvalue2 and aggregatedBalance2 parameters shall be returned or not.
		allowedServiceClassChangeDateFlag	Boolean {0, 1} 0 (false) = Default value. Do not return. 1 (true) = Return.	Optional (0-1)	Indicate whether the serviceClassChangeUnbarDate parameter shall be returned or not.
		requestLocationInformationFlag	Boolean {0, 1} 0 (false) = Default value. Do not return. 1 (true) = Return.	Optional (0-1)	Used to retrieve location information.
	requestPamInformationFlag		Boolean {1} 1 (true) = Periodic Account Management information	Optional (0-1)	Indicate whether periodic account management information is to be included in the response.
	requestActiveOffersFlag		Boolean {0, 1} 0 (false) = Default value. The response will contain the active as well as the inactive (or disabled) 1 (true) = The response will not contain the inactive (or disabled) offers for the subscriber. Only active offers will be returned	Optional (0-1)	Indicate whether the state of the offers that should be included in a response.
	requestAttributesFlag		Boolean {0, 1} 0 (false) = Default value. The response will not contain attributes. 1 (true) = The response will contain attributes, if existing.	Optional (0-1)	Indicate whether the attribute stored for the offer is to be included in a response.
	requestTreeParameterSetsFlag		Boolean {0, 1} 0 (false) = Default value. The response will not contain tree parameter sets. 1 (true) = The response will contain tree parameter sets, if existing.	Optional (0-1)	Indicates if tree parameter sets for all types of trees stored for the offer are to be included in a response.
	associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider.
allowedServiceClasses			Sub-MO	Optional (0-1)	The information of service classes the subscriber is allowed to change to.
	serviceClassCurrent		Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
balanceAndDate				Optional (0-1)	It is used to perform a balance enquiry on the account associated with a specific subscriber identity. Also lifecycle dates are presented. Information is given on both main and dedicated accounts.
	messageCapabilityFlag			Optional (0-1)	The possible actions that may be performed on the account due to an operation initiated over this protocol.
		promotionNotificationFlag	Boolean { 0, 1 } 0 (false) = Default value. Promotion notification code will not be cleared after delivery in response. 1 (true) = Promotion notification code will be cleared after delivery in response.	Optional (0-1)	Indicate whether the promotion notification code shall be cleared or not after delivery in response.
		firstIVRCallSetFlag	Boolean { 0, 1 } 0 (false) = Do not set first IVR call done flag. 1 (true) = Set first IVR call done flag.	Optional (0-1)	Indicate whether the first IVR call done flag shall be set or not.
		accountActivationFlag	Boolean { 0, 1 } 0 (false) = Default value. Pre-activated accounts will not be activated due to the request. Account can however be activated if service fee and supervision expiry dates are set as a result of this request. In this case neither the initial balance nor the life-cycle dates from the pre-activation configuration will not be given. 1 (true) = Pre-activated accounts may be activated due to the request. If service fee and supervision expiry dates are explicitly received in the request these days will used and initial balance will be applied (but no additional days from the pre-activation configuration will be given). If service fee and supervision expiry dates are not explicitly set in the request initial life-cycle days and initial balance is applied.	Optional (0-1)	Indicate whether pre-activated accounts can be or cannot be activated due to the request. The possibility to activate a pre-activated account by this flag is configured in the account databases service class configuration. This results in that even if the flag is set to true the account may not be activated.
	dedicatedAccountSelection		Sub-MO	Optional (0-n)	This parameter is used to select which dedicated accounts that will be returned.
		dedicatedAccountIDFirst	Integer, 1 - 2147483647	Mandatory	The identity of the first dedicated account in a sequence of dedicated accounts, or the only dedicated account identity if a single dedicated account shall be obtained.
		dedicatedAccountIDLast	Integer, 1 - 2147483647	Optional (0-1)	The identity of the last dedicated account in a sequence of dedicated accounts.
	chargingRequestInformation			Optional (0-1)	This parameter contains request information for a charged end user communication event.
		chargingType	Integer, 1 - 6 1 = Check order and make reservation 2 = Perform order and make deduction 3 = Perform order and commit reservation 4 = Rollback reservation 5 = Get allowed options 6 = Rate and check (reserved for future use)	Optional (0-1)	This parameter contains information how the request is to be charged and which mechanism to use.
		chargingIndicator	Integer, 0 - 65535	Optional (0-1)	An indicator for rating differentiation.
		reservationCorrelationID	Integer, 0 - 2147483647	Optional (0-1)	The id needed to correlate a reservation.
	requestSubDedicatedAccountDetailsFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not include the associated `subDedicatedAccountInformation structs`. 1 (true) = The response will include the associated `subDedicatedAccountInformation structs`.	Optional (0-1)	Indicate the requested detail level of the content in the `dedicatedAccountInformation`.
	requestFirstAccessibleAndExpiredBalanceAndDateFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not include the associated closestExpiryDate, closestExpiryValue1, closestExpi ryValue2, closestAccessibleDate, closestAccessibleValue1,closestAcc essibleValue2. 1 (true) = The response will include the associated closestExpiryDate, closestExpiryValue1, closestExpi ryValue2, closestAccessibleDate, closestAccessibleValue1,closestAcc essibleValue2.	Optional (0-1)	Indicate the requested detail level of the content in the dedicatedAccountInformation.
	requestActiveOffersFlag		Boolean {0, 1} 0 (false) = Default value. The response will contain the active as well as the inactive (or disabled) 1 (true) = The response will not contain the inactive (or disabled) offers for the subscriber. Only active offers will be returned	Optional (0-1)	Indicate whether the state of the offers that should be included in a response.
	requestAttributesFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not contain attributes. 1 (true) The response will contain attributes, if existing.	Optional (0-1)	Indicate whether the attribute stored for the offer is to be included in a response.
	requestTreeParameterSetsFlag		Boolean {0, 1} 0 (false) = Default. The response will not contain tree parameter sets. 1 (true) = The response will contain tree parameter sets, if existing.	Optional (0-1)	Indicates if tree parameter sets for all types of trees stored for the offer are to be included in a response.
	associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider.
fafList				Optional (0-1)	Family and Friends List.
	requestedOwner		Integer, 1- 3 1 = Subscriber 2 = Account 3 = Subscriber and account	Mandatory	Indicate whether the data is attached to the account or subscriber.
promotionCounters				Optional (0-1)	It returns the current accumulated values used as base for the calculation of when to give a promotion and when to progress a promotion plan.
promotionPlans				Optional (0-1)	It returns the promotion plans allocated to the subscribers account.
refillOptions			Integer, 1- 999	Optional (0-1)	It contains the value of a refill option
	serviceClassCurrent		Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
	voucherActivationCode		String, 8 - 20 digits	Mandatory	The activation number which is the unique secret code on the voucher which the subscriber uses when performing a voucher based refill of the account. The format includes support of leading zeroes.
	messageCapabilityFlag			Optional (0-1)	The possible actions that may be performed on the account due to an operation initiated over this protocol.
		promotionNotificationFlag	Boolean { 0, 1 } 0 (false) = Default value. Promotion notification code will not be cleared after delivery in response. 1 (true) = Promotion notification code will be cleared after delivery in response.	Optional (0-1)	Indicate whether the promotion notification code shall be cleared or not after delivery in response.
		firstIVRCallSetFlag	Boolean { 0, 1 } 0 (false) = Do not set first IVR call done flag. 1 (true) = Set first IVR call done flag.	Optional (0-1)	Indicate whether the first IVR call done flag shall be set or not.
		accountActivationFlag	Boolean { 0, 1 } 0 (false) = Default value. Pre-activated accounts will not be activated due to the request. Account can however be activated if service fee and supervision expiry dates are set as a result of this request. In this case neither the initial balance nor the life-cycle dates from the pre-activation configuration will not be given. 1 (true) = Pre-activated accounts may be activated due to the request. If service fee and supervision expiry dates are explicitly received in the request these days will used and initial balance will be applied (but no additional days from the pre-activation configuration will be given). If service fee and supervision expiry dates are not explicitly set in the request initial life-cycle days and initial balance is applied.	Optional (0-1)	Indicate whether pre-activated accounts can be or cannot be activated due to the request. The possibility to activate a pre-activated account by this flag is configured in the account databases service class configuration. This results in that even if the flag is set to true the account may not be activated.
usageThresholdsAndCounters				Optional (0-1)	Information of active usage thresholds and usage counters for a subscriber.
	originOperatorID		String, 1- 255 characters	Optional (0-1)	Identity of the system user or the session from where the operation was initiated.
	associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider.
negotiatedCapabilities			Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.

3.2 Response Data

3.2.1 Parameters

MOId

Table 10 Get Subscription Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 11 covers the parameters that can be used in a getSubscription response.

Table 11 Get Subscription Parameters
Parameter						Type	Occurrence	Description
subscriberNumber						String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID						String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
accountDetails							Optional (0-1)	A list of the account details.
	firstIVRCallFlag					Boolean, {1} 1 (true) = The current IVR session is the first IVR call.	Optional (0-1)	This flag is sent to inform the client that the current IVR session is the first IVR call.
	languageIDCurrent					Integer, 1 - 4 1 = Operator specific language 1 2 = Operator specific language 2 3 = Operator specific language 3 4 = Operator specific language 4	Optional (0-1)	The preferred language of subscriber.
	serviceClassOriginal					Integer, 0 - 9999	Optional (0-1)	The identity of the original service class when a temporary service class is active for an account.
	serviceClassCurrent					Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
	serviceClassTemporaryExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of a temporary service class of an account. A temporary service class has precedence before the normally assigned service class, as long as the temporary service class date expiry date is not passed.
	ussdEndOfCallNotificationID					Integer, 0 - 255 0–199 = As defined in the tariff trees 200–254 = Reserved 255 = No ID assigned (clears previously assigned ID)	Optional (0-1)	This parameter identifies which decision tree to use, when selecting the appropriate USSD text string for the End of Call Notification message to the subscriber.
	accountGroupID					Integer, 0 - 2147483647	Optional (0-1)	The Account Group identity for the account. 0 indicate clearing of account group (when set to 0 the account does not belong to any account group).
	serviceOfferings					Sub-MO	Optional (0-n)	The values of the service offerings defined on an account. It has to be matched to the definitions of the tariff tree.
		serviceOfferingID				Integer, 1 - 31	Mandatory	The identity of a current service offering defined on an account.
		serviceOfferingActiveFlag				Boolean { 0, 1 } 0 (false) = The service offering is not active. 1 (true) = The service offering is active.	Mandatory	Whether a specific service offering pointed out by the serviceOfferingID parameter is active or not.
	communityInformationCurrent					String	Optional (0-1)	The community the subscriber currently belongs to.
	temporaryBlockedFlag					Boolean {0, 1} 0 (false) = Default value. Unblocked 1 (true) = Temporary blocked	Optional (0-1)	Indicate whether the subscriber and operator has access to subscriber and account data. A temporary blocked subscriber does not have access to the account, and any messages requesting changes in the account or subscriber data are rejected. Therefore in case temporary blocked is set, a temporary blocked indication is set in the response code of the response message and the action is rejected. It is always possible to read data, but the only way to change data again is to unblock the subscriber.
	accountActivatedFlag					Boolean {1} 1 (true) = Account got activated as a result of the User Communication session.	Optional (0-1)	This flag is sent when the account got activated as a result of the User Communication session.
	activationDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The activation date of an account. Subordinate subscribers will contain the activation date of the master account. Element Value Range: DateMin to DateToday
	accountFlags						Optional (0-1)	The life cycle state flags of the account, indicating the actual status of the account.
		activationStatusFlag				Boolean, { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
		negativeBarringStatusFlag				Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
		supervisionPeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
		serviceFeePeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
		supervisionPeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
		serviceFeePeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
	masterSubscriberFlag					Boolean, { 1 } 1 (true) = The user is the master subscriber of the account.	Optional (0-1)	Indicate that the user is the master subscriber of the account.
	masterAccountNumber					String, 1 - 28	Optional (0-1)	The subscriber identity of the master subscriber in a multi user account. The format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeros.
	refillUnbarDateTime					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time when a refill barred subscriber is unbarred and is allowed to do a new refill.
	promotionAnnouncementCode					Integer, 0 - 99	Optional (0-1)	The promotional code for the announcement to be played.
	promotionPlanID					String, 1 - 4	Optional (0-1)	The identity of one of the current promotion plans of a subscriber.
	promotionStartDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Start date of the associated promotion plan.
	promotionEndDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	End date of the associated promotion plan.
	supervisionExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Expiry date of the supervision period.
	creditClearanceDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when the credit clearance period will expire.
	serviceRemovalDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when the account will be removed after the service removal period has expired.
	serviceFeeExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of the service fee period.
	serviceClassChangeUnbarDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when a charged service class change will be unbarred, that is allowed again. If sent, a charged service class change is not allowed. Today's date and dates older than today's date will not be sent. Element Value Range: DateTomorrow to DateMax.
	serviceFeePeriod					Integer, -32767 to 32767	Optional (0-1)	Number of days until the service fee period expires.
	supervisionPeriod					Integer, -32767 to 32767	Optional (0-1)	Number of days until the supervision period expires.
	serviceRemovalPeriod					Integer, 0 - 1023	Optional (0-1)	The period until service removal.
	creditClearancePeriod					Integer, 0 - 1023	Optional (0-1)	The period until credit clearance.
	currency1					String, Currency	Optional (0-1)	The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	accountValue1					Sting, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The account value for the master account of subscriber. This is not taking in consideration any ongoing chargeable events. It indicates an account value in the first currency.
	currency2					String, Currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	accountValue2					Sting, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The account value for the master account of subscriber. This is not taking in consideration any ongoing chargeable events. It indicates an account value in the second currency.
	accountHomeRegion					Integer, 0 - 999	Optional (0-1)	The home region for the account. Zero means no home region set.
	periodicAccountManagementData					Sub-MO	Optional (0-n)	Information used for periodic account management.
		pamServiceID				Integer, 0 - 99	Mandatory	The id of the periodic account management service.
		pamClassID				Integer, 0 - 9999	Mandatory	The periodic account management class used by the periodic account management service.
		scheduleID				Integer, 0 - 9999	Mandatory	The schedule that is used by the periodic account management service.
		currentPamPeriod				String, 1 - 30 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Mandatory	The periodic account management period that is currently used for the subscriber.
		deferredToDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The deferred to date for the Periodic Account Management service.
		lastEvaluationDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date of the last periodic account management evaluation.
		pamServicePriority				Integer, 0 - 65535	Optional (0-1)	Indicate the priority between PAM services at PAM evaluation. Lower value gives higher priority.
	maxServiceFeePeriod					Integer, 0 - 32767	Optional (0-1)	The maximum allowed duration of the service fee period in number of days until the period expires.
	maxSupervisionPeriod					Integer, 0 - 32767	Optional (0-1)	The maximum allowed duration of the supervision period in number of days until the period expires.
	negativeBalanceBarringDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when a subscriber is scheduled to be barred, or was barred, due to negative balance. Element Value Range: DateMin to DateMax
	accountFlagsBefore						Optional (0-1)	Life cycle state flags of the account, indicating the actual status of the account before.
		activationStatusFlag				Boolean, { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
		negativeBarringStatusFlag				Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
		supervisionPeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
		serviceFeePeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
		supervisionPeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
		serviceFeePeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
	offerInformation					Sub-MO	Optional (0-n)	Dates (or dates and time) for offers.
		offerID				Integer, 0 - 2147483647	Optional (0-1)	The identity of an offer.
		startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account, Value Range: DateMin to DateMax or DateInfinite
		startDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Value Range: DateMin to DateMax or DateInfinite
		pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerType				Integer, 0 - 7	Optional (0-1)	The identifies the offer type.
		offerState				Integer, 0 - 99 0 = Enabled offer state 1 = Disabled offer state 2-99 = Reserved for future use	Optional (0-1)	Specifies the actual offer state to return in a GetOfferrequest.
		offerProviderID				String, 1 - 28 digits	Optional (0-1)	The subscriber number as represented in the SDP database for the provider.
		productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		usageCounterUsageThresholdInformation				Sub-MO	Optional (0-n)	All active usage counters with their thresholds for a subscriber.
			usageCounterID			Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
			usageCounterValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter.
			usageCounterNominalValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter, without any factor.
			usageCounterMonetaryValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the first currency.
			usageCounterMonetaryNominalValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the first currency.
			usageCounterMonetaryValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the second currency.
			usageCounterMonetaryNominalValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the second currency.
			usageThresholdInformation			Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
				usageThresholdID		Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
				usageThresholdValue		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
				usageThresholdMonetaryValue1		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
				usageThresholdMonetaryValue2		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
				usageThresholdSource		Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
				associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
			associatedPartyID			String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		dedicatedAccountChangeInformation				Sub-MO	Optional (0-n)	Information of changes done to balances and dates for dedicated accounts.
			dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
			offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
			closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
			closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
			closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			subDedicatedAccountChangeInformation			Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
				changedAmount1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the first currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
				changedAmount2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the second currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
				dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
				dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
				changedExpiryDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
				newExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new expiry date for a dedicated account.
				clearedExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous expiry date for a cleared dedicated account. DateMin to DateMax or DateInfinite
				changedStartDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the start date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
				newStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new start date for a dedicated account. DateMin to DateMax or DateBeginningOfTime
				clearedStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous start date for a cleared dedicated account. DateMin to DateMax or DateBeginningOfTime
			dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		dedicatedAccountInformation				Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
			dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
			offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
			closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
			closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
			closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			subDedicatedAccountInformation			Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
				dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
				dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
				startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
				expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
			compositeDedicatedAccountFlag			Boolean { 1 }	Optional (0-1)	This flag indicates that a dedicated account is a composite dedicated account. It is used to identify a composite dedicated account that does not have any sub dedicated accounts.
		attributeInformation				Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
			attributeName			String, 1 - 128 characters	Optional (0-1)	The name of the attribute.
			attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
			attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
			attributeValueDecimal				Optional (0-1)	Information about a decimal value.
				attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
				numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
			attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute.
			attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contain the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
		treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
			serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rule determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
			treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about a treeParameter.
				treeParameterName		String, 1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
				treeParameterValueString		String, 1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
				treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
				treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals that are used.
					treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	Contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
					numberOfDecimals	Integer, 0 - 15	Mandatory	Contains information about where to put the decimal sign counted in positions from the right and forms together with attributeValueNumber a decimal number.
				treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter.
				treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
					scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
					scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
					scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
					scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
					scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
					scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
					scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
					scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
				treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
				treeParameterValueDateRange			Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
					treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
					treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
				treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
				treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
				associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
	cellIdentifier					String, 1 - 19 1 - 19 = Numeric 0 - 19 CAP = 14 CGI/SAI	Optional (0-1)	This parameter output the CellGlobal Identity (CGI) or Service Area Identity (SAI). It can be sent as an input parameter through UCIP. If not sent as parameter, this parameter is retrieved from the HLR using ATI request. The cellIdentifier parameter can also be a return parameter through UCIP.
	locationNumber					String, 1 - 20 digits	Optional (0-1)	The parameter contains the location of the subscriber. The default numbering format in the parameter is the same numbering format that is used for subscriber numbers in the Account Database. If another format is used, then it must be indicated by ‘‘Location Number NAI’’
	accountPrepaidEmptyLimit1					String, -999 999 999 999 to 999 999 999 999	Optional (0-1)	The lowest allowed balance on an account. It indicates an account balance in the first currency
	accountPrepaidEmptyLimit2					String, -999 999 999 999 to 999 999 999 999	Optional (0-1)	The lowest allowed balance on an account. It indicates an account balance in the second currency
allowedServiceClasses							Optional (0-1)	The information of service classes the subscriber is allowed to change to.
	serviceClassCurrent					Integer, 0 - 9999	Mandatory	The service class currently used by the subscriber.
	serviceClass					Integer, 0 - 9999	Optional (0-n)	The list of new service classes which the subscriber is allowed to change to.
promotionCounters							Optional (0-1)	It returns the current accumulated values used as base for the calculation of when to give a promotion and when to progress a promotion plan.
	currency1					String, Currency	Optional (0-1)	The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	currency2					String, Currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	promotionRefillAccumulatedValue1					String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of account refills made within the current promotion plan of a subscriber. It indicates the value in the first currency.
	promotionRefillAccumulatedValue2					String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of account refills made within the current promotion plan of a subscriber. It indicates the value in the second currency.
	promotionRefillCounter					Integer, 0 - 255	Optional (0-1)	The accumulated number of account refills within the current promotion plan of a subscriber.
	progressionRefillValue1					String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of refills for promotion plan progression. It indicates the value in the first currency.
	progressionRefillValue2					String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of refills for promotion plan progression. It indicates the value in the second currency.
	progressionRefillCounter					Integer, 0 - 255	Optional (0-1)	The value of the accumulated number of refills for promotion plan progression.
balanceAndDate							Optional (0-1)	It is used to perform a balance enquiry on the account associated with a specific subscriber identity. Also lifecycle dates are presented. Information is given on both main and dedicated accounts.
	serviceClassCurrent					Integer, 0 - 9999	Mandatory	The service class currently used by the subscriber.
	currency1					String, Currency		The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	accountValue1					Sting, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The account value for the master account of subscriber. This is not taking in consideration any ongoing chargeable events. It indicates an account value in the first currency. The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	currency2					String, Currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	accountValue2					Sting, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The account value for the master account of subscriber. This is not taking in consideration any ongoing chargeable events. It indicates an account value in the second currency. For example, SEK, EUR, USD, etc.
	dedicatedAccountInformation					Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
		dedicatedAccountID				Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		dedicatedAccountValue1				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		dedicatedAccountValue2				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerID				Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
		productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		closestExpiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
		closestExpiryValue1				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestExpiryValue2				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestAccessibleDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
		closestAccessibleValue1				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		closestAccessibleValue2				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		subDedicatedAccountInformation				Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		dedicatedAccountActiveValue1				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountActiveValue2				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountUnitType				Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		compositeDedicatedAccountFlag				Boolean { 1 }	Optional (0-1)	This flag indicates that a dedicated account is a composite dedicated account. It is used to identify a composite dedicated account that does not have any sub dedicated accounts.
	supervisionExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of the supervision period.
	serviceFeeExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of the service fee period.
	creditClearanceDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when the credit clearance period will expire.
	serviceRemovalDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when the account will be removed after the service removal period has expired.
	languageIDCurrent					Integer, 1 - 4 1 = Operator specific language 1 2 = Operator specific language 2 3 = Operator specific language 3 4 = Operator specific language 4	Optional (0-n)	The preferred language of subscriber.
	temporaryBlockedFlag					Boolean {0, 1} 0 (false) = Default value. Unblocked 1 (true) = Temporary blocked	Optional (0-1)	Indicate whether the subscriber and operator has access to subscriber and account data. A temporary blocked subscriber does not have access to the account, and any messages requesting changes in the account or subscriber data are rejected. Therefore in case temporary blocked is set, a temporary blocked indication is set in the response code of the response message and the action is rejected. It is always possible to read data, but the only way to change data again is to unblock the subscriber.
	chargingResultInformation						Optional (0-1)	Information for a charged end user communication event.
		cost1				String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The cost for an event. It indicates a cost in the first currency.
		currency1				String, ISO 4217 standard	Optional (0-1)	The first currency to be presented to the end user.
		cost2				String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The cost for an event. It indicates a cost in the second currency.
		currency2				String, ISO 4217 standard	Optional (0-1)	The second currency to be presented to the end user.
		chargingResultCode				Integer, 0 - 2 0 = or not present Successful 1 = No charge (free counter stepped) 2 = No charge (free counter not stepped)	Optional (0-1)	Information related to a charged event.
		reservationCorrelationID				Integer, 0 - 2147483647	Optional (0-1)	The id needed to correlate a reservation.
		chargingResultInformationService					Optional (0-1)	Result information regarding a service for a charged end user communication event
			cost1			String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The cost for an event. It indicates a cost in the first currency.
			cost2			String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The cost for an event. It indicates a cost in the second currency.
	accountFlagsAfter						Optional (0-1)	Life cycle state flags of the account, indicating the actual status of the account after.
		activationStatusFlag				Boolean, { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
		negativeBarringStatusFlag				Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
		supervisionPeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
		serviceFeePeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
		supervisionPeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
		serviceFeePeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
	accountFlagsBefore						Optional (0-1)	Life cycle state flags of the account, indicating the actual status of the account before.
		activationStatusFlag				Boolean, { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
		negativeBarringStatusFlag				Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
		supervisionPeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
		serviceFeePeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
		supervisionPeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
		serviceFeePeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
	offerInformation					Sub-MO	Optional (0-n)	Dates (or dates and time) for offers.
		offerID				Integer, 0 - 2147483647	Mandatory	The identity of an offer.
		startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account, Value Range: DateMin to DateMax or DateInfinite
		startDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Value Range: DateMin to DateMax or DateInfinite
		pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerType				Integer, 0 - 7	Optional (0-1)	The identifies the offer type.
		offerState				Integer, 0 - 99 0 = Enabled offer state 1 = Disabled offer state 2-99 = Reserved for future use	Optional (0-1)	Specifies the actual offer state to return in a GetOfferrequest.
		offerProviderID				String, 1 - 28 digits	Optional (0-1)	The subscriber number as represented in the SDP database for the provider.
		productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		usageCounterUsageThresholdInformation				Sub-MO	Optional (0-n)	All active usage counters with their thresholds for a subscriber.
			usageCounterID			Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
			usageCounterValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter.
			usageCounterNominalValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter, without any factor.
			usageCounterMonetaryValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the first currency.
			usageCounterMonetaryNominalValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the first currency.
			usageCounterMonetaryValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the second currency.
			usageCounterMonetaryNominalValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the second currency.
			usageThresholdInformation			Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
				usageThresholdID		Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
				usageThresholdValue		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
				usageThresholdMonetaryValue1		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
				usageThresholdMonetaryValue2		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
				usageThresholdSource		Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
				associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
			associatedPartyID			String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		dedicatedAccountChangeInformation				Sub-MO	Optional (0-n)	Information of changes done to balances and dates for dedicated accounts.
			dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
			offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
			closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
			closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
			closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			subDedicatedAccountChangeInformation			Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
				changedAmount1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the first currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
				changedAmount2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the second currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
				dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
				dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
				changedExpiryDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
				newExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new expiry date for a dedicated account.
				clearedExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous expiry date for a cleared dedicated account. DateMin to DateMax or DateInfinite
				changedStartDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the start date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
				newStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new start date for a dedicated account. DateMin to DateMax or DateBeginningOfTime
				clearedStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous start date for a cleared dedicated account. DateMin to DateMax or DateBeginningOfTime
			dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		dedicatedAccountInformation				Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
			dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
			offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
			closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
			closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
			closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			subDedicatedAccountInformation			Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
				dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
				dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
				startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
				expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
			compositeDedicatedAccountFlag			Boolean { 1 }	Optional (0-1)	Indicate that a dedicated account is a composite dedicated account. It is used to identify a composite dedicated account that does not have any sub dedicated accounts
		attributeInformation				Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
			attributeName			String, 1 - 128 characters	Mandatory	The name of the attribute.
			attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
			attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
			attributeValueDecimal				Optional (0-1)	Information about a decimal value.
				attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
				numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
			attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute.
			attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contains the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
		treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
			serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rule determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
			treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about a treeParameter.
				treeParameterName		String, 1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
				treeParameterValueString		String, 1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
				treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
				treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals that are used.
					treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	Contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
					numberOfDecimals	Integer, 0 - 15	Mandatory	Contains information about where to put the decimal sign counted in positions from the right and forms together with attributeValueNumber a decimal number.
				treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter.
				treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
					scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
					scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
					scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
					scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
					scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
					scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
					scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
					scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
				treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
				treeParameterValueDateRange			Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
					treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
					treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
				treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
				treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
				associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
	accountPrepaidEmptyLimit1					String, -999 999 999 999 to 999 999 999 999	Optional (0-1)	The lowest allowed balance on an account. It indicates an account balance in the first currency
	accountPrepaidEmptyLimit2					String, -999 999 999 999 to 999 999 999 999	Optional (0-1)	The lowest allowed balance on an account. It indicates an account balance in the second currency
fafList							Optional (0-1)	Family and Friends List.
	fafInformation						Optional (0-1)	The information of Family and Friends.
		fafNumber				tring, 1 - 30 digits	Mandatory	A Family and Friends number
		owner				String Enumeration value="Subscriber" Enumeration value="Account"	Mandatory	Indicate whether the data is attached to the account or subscriber.
		fafIndicator				Integer, 1 - 65535	Optional (0-1)	This parameter is used for differentiated rating for traffic events to and from numbers in the Family and Friends (FaF) number list.
		exactMatch				Boolean { 0, 1 } 0 = Default value. Match faf number partially. 1 = Match faf number exactly.	Optional (0-1)	Indicate whether the faf number should be matched partial or exact.
	fafChangeUnbarDate					DateTime.iso8601	Optional (0-1)	The date when a family and friends change is allowed again. DateTomorrow to DateMax
	fafMaxAllowedNumbersReachedFlag					Boolean, {0, 1} 0 (false) = Default value. Maximum number of allowed FaF numbers is not reached. 1 (true) = Maximum number of allowed FaF numbers is reached.	Optional (0-1)	A flag indicating that it's not allowed to add more FaF numbers to the FaF-list for this subscriber.
	fafChargingNotAllowedFlag					Boolean, {0, 1} 0 (false) = Default value. Charged FaF administration is allowed for service class. 1 (true) = Charged FaF administration is not allowed for service class.	Optional (0-1)	Indicate that charged Family and Friends (FaF) administration is not allowed for the current service class.
promotionPlans							Optional (0-1)	It returns the promotion plans allocated to the subscribers account.
	originOperatorID					String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example.
	promotionPlanInformation						Optional (0-1)	The information of promotion plan.
		promotionPlanID				String, 1 - 4	Mandatory	The identity of one of the current promotion plans of a subscriber.
		promotionStartDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Start date of the associated promotion plan.
		promotionEndDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	End date of the associated promotion plan.
refillOptions						Integer, 1- 999	Optional (0-1)	It contains the value of a refill option
	serviceClassCurrent					Integer, 0 - 9999	Mandatory	The service class currently used by the subscriber.
	refillOptions					Integer, 1- 999	Mandatory	It contains the value of a refill option
	accountFlagsAfter						Optional (0-1)	Life cycle state flags of the account, indicating the actual status of the account after.
		activationStatusFlag				Boolean, { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
		negativeBarringStatusFlag				Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
		supervisionPeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
		serviceFeePeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
		supervisionPeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
		serviceFeePeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
	accountFlagsBefore						Optional (0-1)	Life cycle state flags of the account, indicating the actual status of the account before.
		activationStatusFlag				Boolean, { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
		negativeBarringStatusFlag				Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
		supervisionPeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
		serviceFeePeriodWarningActiveFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
		supervisionPeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
		serviceFeePeriodExpiryFlag				Boolean, { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
usageThresholdsAndCounters							Optional (0-1)	Information of active usage thresholds and usage counters for a subscriber.
	originOperatorID					String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example.
	currency1					String, Currency	Optional (0-1)	The first currency to be presented to the end user.
	currency2					String, Currency	Optional (0-1)	The second currency to be presented to the end user.
	usageCounterUsageThresholdInformation					Sub-MO	Optional (0-n)	All active usage counters with their thresholds for a subscriber.
		usageCounterID				Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
		usageCounterValue				String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter.
		usageCounterNominalValue				String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter, without any factor.
		usageCounterMonetaryValue1				String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the first currency.
		usageCounterMonetaryNominalValue1				String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the first currency.
		usageCounterMonetaryValue2				String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the second currency.
		usageCounterMonetaryNominalValue2				String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the second currency.
		usageThresholdInformation				Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
			usageThresholdID			Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
			usageThresholdValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
			usageThresholdMonetaryValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
			usageThresholdMonetaryValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
			usageThresholdSource			Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
			associatedPartyID			String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		associatedPartyID				String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
negotiatedCapabilities						Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities						Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

3.3 Examples

3.3.1 Example of Retrieving the Account Details

This section gives an example of the getSubscription request and response message. This example shows how to retrieve the account details of a subscriber.

Request Example

Example 6 Get Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/"
 xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>${Properties#sessionId}</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>4955897213</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="4955897213">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:accountDetails>
                  <air:requestAttributesFlag>1</air:requestAttributesFlag>
                  <air:requestTreeParameterSetsFlag>1</air:requestTreeParameterSetsFlag>
               </air:accountDetails>
               <air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
               <air:negotiatedCapabilities>168</air:negotiatedCapabilities>
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 7 Get Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>bf64107bff654bdeb82a25a01e260ce6</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:getSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000010005</air:subscriberNumber>
               <air:originTransactionID>1445324795536584705</air:originTransactionID>
               <air:accountDetails>
                  <air:firstIVRCallFlag>1</air:firstIVRCallFlag>
                  <air:languageIDCurrent>1</air:languageIDCurrent>
                  <air:serviceClassCurrent>111</air:serviceClassCurrent>
                  <air:ussdEndOfCallNotificationID>0</air:ussdEndOfCallNotificationID>
                  <air:accountGroupID>1</air:accountGroupID>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>1</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>2</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>3</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>4</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>5</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>6</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>7</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>8</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>9</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>10</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>11</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>12</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>13</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>14</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>15</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>16</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>17</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>18</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>19</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>20</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>21</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>22</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>23</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>24</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>25</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>26</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>27</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>28</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>29</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>30</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:serviceOfferings>
                     <air:serviceOfferingID>31</air:serviceOfferingID>
                     <air:serviceOfferingActiveFlag>0</air:serviceOfferingActiveFlag>
                  </air:serviceOfferings>
                  <air:accountFlags>
                     <air:activationStatusFlag>0</air:activationStatusFlag>
                     <air:negativeBarringStatusFlag>0</air:negativeBarringStatusFlag>
                     <air:supervisionPeriodWarningActiveFlag>
                      0</air:supervisionPeriodWarningActiveFlag>
                     <air:serviceFeePeriodWarningActiveFlag>
                      0</air:serviceFeePeriodWarningActiveFlag>
                     <air:supervisionPeriodExpiryFlag>0</air:supervisionPeriodExpiryFlag>
                     <air:serviceFeePeriodExpiryFlag>0</air:serviceFeePeriodExpiryFlag>
                  </air:accountFlags>
                  <air:masterSubscriberFlag>1</air:masterSubscriberFlag>
                  <air:masterAccountNumber>465273152000010</air:masterAccountNumber>
                  <air:promotionPlanID>123</air:promotionPlanID>
                  <air:promotionStartDate>2015-08-26T12:00:00+00:00</air:promotionStartDate>
                  <air:promotionEndDate>2016-08-20T12:00:00+00:00</air:promotionEndDate>
                  <air:serviceRemovalPeriod>0</air:serviceRemovalPeriod>
                  <air:creditClearancePeriod>0</air:creditClearancePeriod>
                  <air:maxServiceFeePeriod>100</air:maxServiceFeePeriod>
                  <air:maxSupervisionPeriod>100</air:maxSupervisionPeriod>
                  <air:accountFlagsBefore>
                     <air:activationStatusFlag>0</air:activationStatusFlag>
                     <air:negativeBarringStatusFlag>0</air:negativeBarringStatusFlag>
                     <air:supervisionPeriodWarningActiveFlag>
                      0</air:supervisionPeriodWarningActiveFlag>
                     <air:serviceFeePeriodWarningActiveFlag>
                      0</air:serviceFeePeriodWarningActiveFlag>
                     <air:supervisionPeriodExpiryFlag>0</air:supervisionPeriodExpiryFlag>
                     <air:serviceFeePeriodExpiryFlag>0</air:serviceFeePeriodExpiryFlag>
                  </air:accountFlagsBefore>
                  <air:accountPrepaidEmptyLimit1>100</air:accountPrepaidEmptyLimit1>
               </air:accountDetails>
               <air:negotiatedCapabilities>8192</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:getSubscriptionResponse>
         </MOAttributes>
      </GetResponse>
   </S:Body>
</S:Envelope>

3.3.2 Example of Retrieving the Balance and Date Details

This section gives an example of the getSubscription request and response message. This example shows how to retrieve the Balance and Date details of a subscriber.

Request Example

Example 8 Get Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>e1d4bebfdd1e49c287654222abe4022a6</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000014</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="465273152000014">
               <air:originNodeType>ADM</air:originNodeType>
                <air:originHostName>node1</air:originHostName>
               <air:originTransactionID>12345</air:originTransactionID>
               <air:originTimeStamp>2015-10-23T12:00:00+00:00</air:originTimeStamp>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:balanceAndDate>
                  <air:messageCapabilityFlag>
                     <air:promotionNotificationFlag>0</air:promotionNotificationFlag>
                     <air:firstIVRCallSetFlag>0</air:firstIVRCallSetFlag>
                     <air:accountActivationFlag>0</air:accountActivationFlag>
                  </air:messageCapabilityFlag>
                    <air:dedicatedAccountSelection>
                    <air:dedicatedAccountIDFirst>1</air:dedicatedAccountIDFirst>
                  </air:dedicatedAccountSelection>
                  <air:dedicatedAccountSelection>
                     <air:dedicatedAccountIDFirst>1</air:dedicatedAccountIDFirst>
                     <air:dedicatedAccountIDLast>2</air:dedicatedAccountIDLast>
                  </air:dedicatedAccountSelection>
                  <air:chargingRequestInformation>
                     <air:chargingType>5</air:chargingType>
                     <air:chargingIndicator>0</air:chargingIndicator>
                     <air:reservationCorrelationID>0</air:reservationCorrelationID>
                  </air:chargingRequestInformation>
                  <air:requestSubDedicatedAccountDetailsFlag>
                  1</air:requestSubDedicatedAccountDetailsFlag>
                  <air:requestFirstAccessibleAndExpiredBalanceAndDateFlag>
                   1</air:requestFirstAccessibleAndExpiredBalanceAndDateFlag>
                  <air:requestActiveOffersFlag>1</air:requestActiveOffersFlag>
                  <air:requestAttributesFlag>1</air:requestAttributesFlag>
               </air:balanceAndDate>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 9 Get Subscription Response Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>e1d4bebfdd1e49c287654222abe4022a6</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000014</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="465273152000014">
               <air:originNodeType>ADM</air:originNodeType> 
               <air:originHostName>node1</air:originHostName>
               <air:originTransactionID>12345</air:originTransactionID>
               <air:originTimeStamp>2015-10-23T12:00:00+00:00</air:originTimeStamp>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:balanceAndDate>
                  <air:messageCapabilityFlag>
                     <air:promotionNotificationFlag>0</air:promotionNotificationFlag>
                     <air:firstIVRCallSetFlag>0</air:firstIVRCallSetFlag>
                     <air:accountActivationFlag>0</air:accountActivationFlag>
                  </air:messageCapabilityFlag>
                  <air:dedicatedAccountSelection>
                     <air:dedicatedAccountIDFirst>1</air:dedicatedAccountIDFirst>
                  </air:dedicatedAccountSelection>
                  <air:dedicatedAccountSelection>
                     <air:dedicatedAccountIDFirst>1</air:dedicatedAccountIDFirst>
                     <air:dedicatedAccountIDLast>2</air:dedicatedAccountIDLast>
                  </air:dedicatedAccountSelection>
                  <air:chargingRequestInformation>
                     <air:chargingType>5</air:chargingType>
                     <air:chargingIndicator>0</air:chargingIndicator>
                     <air:reservationCorrelationID>0</air:reservationCorrelationID>
                  </air:chargingRequestInformation>
                  <air:requestSubDedicatedAccountDetailsFlag>
                   1</air:requestSubDedicatedAccountDetailsFlag>
                  <air:requestFirstAccessibleAndExpiredBalanceAndDateFlag>
                   1</air:requestFirstAccessibleAndExpiredBalanceAndDateFlag>
                    <air:requestActiveOffersFlag>1</air:requestActiveOffersFlag>
                  <air:requestAttributesFlag>1</air:requestAttributesFlag>
               </air:balanceAndDate>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

3.3.3 Example of Retrieving the Promotion Plan Details

This section gives an example of the getSubscription request and response message. This example shows how to retrieve the promotion plan details of a subscriber.

Request Example

Example 10 Get Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>f62b6df1ff14466e8fc9a0882a2af237</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000292</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
           <air:getSubscription subscriberNumber="465273152000292">               
               <air:originNodeType>ADM</air:originNodeType>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:promotionPlans/>               
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 11 Get Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>f62b6df1ff14466e8fc9a0882a2af237</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:getSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000292</air:subscriberNumber>
               <air:originTransactionID>14461541312756764732</air:originTransactionID>
               <air:promotionPlans>
                  <air:promotionPlanInformation>
                     <air:promotionPlanID>2</air:promotionPlanID>
                     <air:promotionStartDate>2013-09-26T12:00:00+00:00</air:promotionStartDate>
                     <air:promotionEndDate>2015-12-26T12:00:00+00:00</air:promotionEndDate>
                  </air:promotionPlanInformation>
               </air:promotionPlans>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:getSubscriptionResponse>
         </MOAttributes>
      </GetResponse>
   </S:Body>
</S:Envelope>

3.3.4 Example of Retrieving the Promotion Counters Details

This section gives an example of the getSubscription request and response message. This example shows how to retrieve the promotion counters information of a subscriber.

Request Example

Example 12 Get Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>8fba5eecbd754021a4f6f2c464eac3c3</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="465273152000001">
               <air:originNodeType>ADM</air:originNodeType>
               <air:originHostName>node1</air:originHostName>
               <air:originTransactionID>12345</air:originTransactionID>
               <air:originTimeStamp>2015-10-23T12:00:00+00:00</air:originTimeStamp>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:promotionCounters/>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>               
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 13 Get Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>8fba5eecbd754021a4f6f2c464eac3c3</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:getSubscriptionResponse 
               xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>12345</air:originTransactionID>
               <air:promotionCounters>
                  <air:currency1>SEK</air:currency1>
<air:promotionRefillAccumulatedValue1>999999999999</air:promotionRefillAccumulatedValue1>
                  <air:promotionRefillCounter>255</air:promotionRefillCounter>
<air:progressionRefillValue1>999999999999</air:progressionRefillValue1>
<air:progressionRefillCounter>255</air:progressionRefillCounter>
               </air:promotionCounters>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
<air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:getSubscriptionResponse>
         </MOAttributes>
      </GetResponse>
   </S:Body>
</S:Envelope>

3.3.5 Example of Retrieving the FaF List

This section gives an example of the getSubscription request and response message. This example shows how to retrieve the FaF list information of a subscriber.

Request Example

Example 14 Get Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>3da2c60a07064e83ac9372e258e6ae5d</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
<cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="465273152000001">
               <air:fafList>
                  <air:requestedOwner>3</air:requestedOwner>
               </air:fafList>
<air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 15 Get Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>3da2c60a07064e83ac9372e258e6ae5d</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:getSubscriptionResponse 
              xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
<air:originTransactionID>14461546553265469772</air:originTransactionID>
               <air:fafList>
                  <air:fafInformation>
                     <air:fafNumber>0703105001</air:fafNumber>
                     <air:owner>Account</air:owner>
                     <air:fafIndicator>5004</air:fafIndicator>
                  </air:fafInformation>
                  <air:fafInformation>
                     <air:fafNumber>0703105999</air:fafNumber>
                     <air:owner>Subscriber</air:owner>
                     <air:fafIndicator>5003</air:fafIndicator>
                  </air:fafInformation>
               </air:fafList>
<air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
<air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:getSubscriptionResponse>
         </MOAttributes>
      </GetResponse>
   </S:Body>
</S:Envelope>

3.3.6 Example of Retrieving the Refill Options

This section gives an example of the getSubscription request and response message. This example shows how to retrieve the Refill Options of a subscriber.

Request Example

Example 16 Get Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>80b8cc5cc20b477dbd3d7e05d3320424</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
<cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="465273152000001">
               <air:refillOptions>
                  <air:serviceClassCurrent>0</air:serviceClassCurrent>
<air:voucherActivationCode>00000000</air:voucherActivationCode>
                  <air:messageCapabilityFlag>
<air:promotionNotificationFlag>1</air:promotionNotificationFlag>
                     <air:firstIVRCallSetFlag>1</air:firstIVRCallSetFlag>
                     <air:accountActivationFlag>1</air:accountActivationFlag>
                  </air:messageCapabilityFlag>
               </air:refillOptions>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 17 Get Subscription Response Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>80b8cc5cc20b477dbd3d7e05d3320424</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
<cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="465273152000001">
               <air:refillOptions>
                  <air:serviceClassCurrent>0</air:serviceClassCurrent>
<air:voucherActivationCode>00000000</air:voucherActivationCode>
                  <air:messageCapabilityFlag>
<air:promotionNotificationFlag>1</air:promotionNotificationFlag>
                     <air:firstIVRCallSetFlag>1</air:firstIVRCallSetFlag>
                     <air:accountActivationFlag>1</air:accountActivationFlag>
                  </air:messageCapabilityFlag>
               </air:refillOptions>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

3.3.7 Example of Retrieving the Usage Thresholds and Counters

This section gives an example of the getSubscription request and response message. This example shows how to retrieve the Usage Thresholds and Counters information of a subscriber.

Request Example

Example 18 Get Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>8762d368b14d408bb9e36ef81a8bfffb</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
<cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000009</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="465273152000009">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:usageThresholdsAndCounters>
               </air:usageThresholdsAndCounters>              
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 19 Get Subscription Response Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>8762d368b14d408bb9e36ef81a8bfffb</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>    
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000009</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="465273152000009">               
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>         
               <air:usageThresholdsAndCounters>
               </air:usageThresholdsAndCounters>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

3.3.8 Example of Retrieving the Allowed Service Class

This section gives an example of the getSubscription request and response message. This example shows how to retrieve the Allowed Service Class details of a subscriber.

Request Example

Example 20 Get Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>8298219224044d389372c5850deeef8e</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
<cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="465273152000001">
               <air:allowedServiceClasses>
                  <air:serviceClassCurrent>100</air:serviceClassCurrent>
               </air:allowedServiceClasses>
<air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 21 Get Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>8298219224044d389372c5850deeef8e</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:getSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
<air:originTransactionID>14462116962525038412</air:originTransactionID>
               <air:allowedServiceClasses>
                  <air:serviceClassCurrent>111</air:serviceClassCurrent>
               </air:allowedServiceClasses>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
<air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:getSubscriptionResponse>
         </MOAttributes>
      </GetResponse>
   </S:Body>
</S:Envelope>

4 Set AIR Subscription

This section covers the AIR command SetSubscription .

MOType

Subscription@http://schemas.ericsson.com/ma/CS/AIR/

4.1 Request Data

4.1.1 Parameters

MOId

Table 12 Set Subscription MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 13 covers the parameters that can be used in a setSubscription request.

Table 13 Set Subscription Parameter
Parameter				Type	Occurrence	Description
originNodeType				String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName				String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID				String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill. If this parameter is absent from the request, Dynamic Activation will generate System time milliseconds plus seven random digital numbers as the parameter to NEs.
originTimeStamp				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation. If this parameter is absent from the request, Dynamic Activation will generate system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic
subscriberNumberNAI				Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
originOperatorID				String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate the default "operator" or the configured `OriginOperatorId` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic configure.
accountDetails				Sub-MO	Optional (0-1)	A list of the account details.
	accountPrepaidEmptyLimitAction			String Enumeration value="SET" Enumeration value="DELETE"	Optional (0-1)	This parameter contains the requested action for changing the Account Prepaid Empty Limit. SET = Update the Account Prepaid Empty Limit. DELETE = Delete the Account Prepaid Empty Limit.
	messageCapabilityFlag			Sub-MO	Optional (0-1)	The possible actions that may be performed on the account due to an operation initiated over this protocol.
		promotionNotificationFlag		Boolean { 0, 1 } 0 (false) = Default value. Promotion notification code will not be cleared after delivery in response. 1 (true) = Promotion notification code will be cleared after delivery in response.	Optional (0-1)	Indicate whether the promotion notification code shall be cleared or not after delivery in response.
		firstIVRCallSetFlag		Boolean { 0, 1 } 0 (false) = Do not set first IVR call done flag. 1 (true) = Set first IVR call done flag.	Optional (0-1)	Indicate whether the first IVR call done flag shall be set or not.
		accountActivationFlag		Boolean { 0, 1 } 0 (false) = Default value. Pre-activated accounts will not be activated due to the request. Account can however be activated if service fee and supervision expiry dates are set as a result of this request. In this case neither the initial balance nor the life-cycle dates from the pre-activation configuration will not be given. 1 (true) = Pre-activated accounts may be activated due to the request. If service fee and supervision expiry dates are explicitly received in the request these days will used and initial balance will be applied (but no additional days from the pre-activation configuration will be given). If service fee and supervision expiry dates are not explicitly set in the request initial life-cycle days and initial balance is applied.	Optional (0-1)	Indicate whether pre-activated accounts can be or cannot be activated due to the request. The possibility to activate a pre-activated account by this flag is configured in the account databases service class configuration. This results in that even if the flag is set to true the account may not be activated.
	languageIDNew			Integer, 1 - 4 1 = Operator specific language 1 2 = Operator specific language 2 3 = Operator specific language 3 4 = Operator specific language 4	Optional (0-1)	The new preferred language of the subscriber.
	firstIVRCallDoneFlag			Boolean { 1 } 1 (true) = First IVR call has been done.	Optional (0-1)	Indicate that the first IVR call has been done.
	externalData1			String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
	externalData2			String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
	accountHomeRegion			Integer, 0 - 999	Optional (0-1)	The home region for the account. Zero means no home region set.
	ussdEndOfCallNotificationID			Integer, 0 - 255 0–199 = As defined in the tariff trees 200–254 = Reserved 255 = No ID assigned (clears previously assigned ID)	Optional (0-1)	This parameter identifies which decision tree to use, when selecting the appropriate USSD text string for the End of Call Notification message to the subscriber.
	languageIDCurrent			Integer, 1 - 4 1 = Operator specific language 1 2 = Operator specific language 2 3 = Operator specific language 3 4 = Operator specific language 4	Optional (0-1)	The preferred language of subscriber.
	transactionCurrency			String, currency	Optional (0-1)	The ID to point out what currency is used for the transaction. For example, SEK, EUR, USD, etc.
	accountPrepaidEmptyLimit			String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	This parameter is used to set a lowest allowed balance on an account.
periodicAccountManagementData				Sub-MO	Optional (0-n)	Periodic account management data for a subscriber.
	pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	pamClassID			Integer, 0 - 9999	Optional (0-1)	The periodic account management class used by the periodic account management service.
	scheduleID			Integer, 0 - 9999	Optional (0-1)	The schedule that is used by the periodic account management service.
	currentPamPeriod			String, 1 - 30 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	periodic account management period that is currently used for the subscriber.
	deferredToDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The deferred to date for the Periodic Account Management service.
	pamServicePriority			Integer, 0 - 65535	Optional (0-1)	Indicate the priority between PAM services at PAM evaluation. Lower value gives higher priority.
	pamClassIDCurrent			Integer, 0 - 9999	Optional (0-1)	The current periodic account management class used by the periodic account management service.
	scheduleIDCurrent			Integer, 0 - 9999	Optional (0-1)
	pamServicePriorityCurrent			Integer, 0 - 65535	Optional (0-1)
accountGroupID				Integer, 0 - 2147483647	Optional (0-1)	The Account Group identity for the account. 0 indicate clearing of account group (when set to 0 the account does not belong to any account group).
serviceOfferings				Sub-MO	Optional (0-n)	The values of the service offerings defined on an account. It has to be matched to the definitions of the tariff tree.
	serviceOfferingID			Integer, 1 - 31	Mandatory	The identity of a current service offering defined on an account.
	serviceOfferingActiveFlag			Boolean { 0, 1 } 0 (false) = The service offering is not active. 1 (true) = The service offering is active.	Mandatory	Whether a specific service offering pointed out by the serviceOfferingID parameter is active or not.
serviceOfferingsValue				Sub-MO	Optional (0-1)	An array of the service offering value in decimal.
	serviceOfferingsValueAdd			String	Optional (0-1)	The service offerings which is to be added to the subscriber.
	serviceOfferingsValueDelete			String	Optional (0-1)	The service offerings which is to be deleted from the subscriber.
	serviceOfferingsValueCurrent			String	Mandatory	The current value of service offerings value.
PromotionPlan				Sub-MO	Optional (0-n)	A list of promotion plan.
	promotionPlanID			String, 1 - 4 characters	Optional (0-1)	The identity of one of the current promotion plans of a subscriber.
	promotionPlanIDCurrent			String, 1 - 4 characters	Optional (0-1)	The identity of one of the current promotion plans of a subscriber.
	promotionOldStartDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The old start date of the associated promotion plan.
	promotionOldEndDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The old end date of the associated promotion plan.
	promotionStartDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date of the associated promotion plan.
	promotionEndDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The end date of the associated promotion plan.
temporaryBlockedFlag				Boolean { 0, 1 } 0 (false) = Default value. Unblocked 1 (true) = Temporary blocked	Optional (0-1)	Indicate whether the subscriber and operator have access to subscriber and account data.
serviceClass				Sub-MO	Optional (0-1)	A list information of service class
	serviceClassAction			String Enumeration value="SET" Enumeration value="SetOriginal" Enumeration value="SetTemporary" Enumeration value="DeleteTemporary"	Mandatory	Indicate which action to take when updating the service class. Set = Update ordinary (original) and temporary Service classes SetOriginal = Update ordinary (original) Service class SetTemporary = Update temporary Service class DeleteTemporary = Remove temporary Service class
	serviceClassCurrent			Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
	serviceClassNew			Integer, 0 - 9999	Optional (0-1)	The new service class for the refill.
	serviceClassTemporary			Integer, 0 - 9999	Optional (0-1)	The service class to be used by the subscriber.
	serviceClassTemporaryExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of a temporary service class of an account.
	serviceClassTemporaryNew			Integer, 0 - 9999	Optional (0-1)	The new temporary service class when changing an already assigned temporary service class.
	serviceClassTemporaryNewExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)
	serviceClassValidationFlag			Boolean { 0, 1 } 0 (false) = Default value. Do not perform validation. 1 (true) = Perform validation.	Optional (0-1)	Indicate whether validation regarding if a service class update is made within the range of allowed service classes shall be performed or not.
	externalData1			String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
	externalData2			String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
	chargingRequestInformation			Sub-MO	Optional (0-1)	This parameter contains request information for a charged end user communication event.
		chargingType		Integer, 1 - 6 1 = Check order and make reservation 2 = Perform order and make deduction 3 = Perform order and commit reservation 4 = Rollback reservation 5 = Get allowed options 6 = Rate and check (reserved for future use)	Optional (0-1)	This parameter contains information how the request is to be charged and which mechanism to use.
		chargingIndicator		Integer, 0 - 65535	Optional (0-1)	An indicator for rating differentiation.
		reservationCorrelationID		Integer, 0 - 2147483647	Optional (0-1)	The id needed to correlate a reservation.
FaF				Sub-MO	Optional (0-n)	Information about family and friends function
	fafNumber			tring, 1 - 30 digits	Optional (0-1)	A Family and Friends number
	owner			String Enumeration value="Subscriber" Enumeration value="Account"	Optional (0-1)	Indicate whether the data is attached to the account or subscriber.
	fafIndicator			Integer, 1 - 65535	Optional (0-1)	This parameter is used for differentiated rating for traffic events to and from numbers in the Family and Friends (FaF) number list.
	exactMatch			Boolean { 0, 1 } 0 = Default value. Match faf number partially. 1 = Match faf number exactly.	Optional (0-1)	Indicate whether the faf number should be matched partial or exact.
	selectedOption			Integer, 1 - 999	Optional (0-1)	The value of the selected option. The values are configurable by the operator.
	chargingRequestInformation			Sub-MO	Optional (0-1)	This parameter contains request information for a charged end user communication event.
		chargingType		Integer, 1 - 6 1 = Check order and make reservation 2 = Perform order and make deduction 3 = Perform order and commit reservation 4 = Rollback reservation 5 = Get allowed options 6 = Rate and check (reserved for future use)	Optional (0-1)	This parameter contains information how the request is to be charged and which mechanism to use.
		chargingIndicator		Integer, 0 - 65535	Optional (0-1)	An indicator for rating differentiation.
		reservationCorrelationID		Integer, 0 - 2147483647	Optional (0-1)	The id needed to correlate a reservation.
	enableFafMNPFlag			Boolean { 0, 1 } 0 = No check of FaF number towards NPDB will be performed. 1 = Check of FaF number towards NPDB will be performed.	Optional (0-1)	This parameter is sent if the check of FaF number towards NPDB should be performed.
communityInformationCurrent				String	Optional (0-1)	The community the subscriber currently belongs to.
communityInformationNew				String	Optional (0-1)	The community which is to be assigned to the subscriber.
communityInformationUpdate				Sub-MO	Optional (0-1)	Contains the community which is to be added to the subscriber and the community which is to be deleted from the subscriber.
	communityInformationAdd			String	Optional (0-1)	The community which is to be added to the subscriber.
	communityInformationDelete			String	Optional (0-1)	The community which is to be deleted from the subscriber.
balanceAndDate				Sub-MO	Optional (0-1)	It is used to perform a balance enquiry on the account associated with a specific subscriber identity. Also lifecycle dates are presented. Information is given on both main and dedicated accounts.
	messageCapabilityFlag			Sub-MO	Optional (0-1)	The possible actions that may be performed on the account due to an operation initiated over this protocol.
		promotionNotificationFlag		Boolean { 0, 1 } 0 (false) = Default value. Promotion notification code will not be cleared after delivery in response. 1 (true) = Promotion notification code will be cleared after delivery in response.	Optional (0-1)	Indicate whether the promotion notification code shall be cleared or not after delivery in response.
		firstIVRCallSetFlag		Boolean { 0, 1 } 0 (false) = Do not set first IVR call done flag. 1 (true) = Set first IVR call done flag.	Optional (0-1)	Indicate whether the first IVR call done flag shall be set or not.
		accountActivationFlag		Boolean { 0, 1 } 0 (false) = Default value. Pre-activated accounts will not be activated due to the request. Account can however be activated if service fee and supervision expiry dates are set as a result of this request. In this case neither the initial balance nor the life-cycle dates from the pre-activation configuration will not be given. 1 (true) = Pre-activated accounts may be activated due to the request. If service fee and supervision expiry dates are explicitly received in the request these days will used and initial balance will be applied (but no additional days from the pre-activation configuration will be given). If service fee and supervision expiry dates are not explicitly set in the request initial life-cycle days and initial balance is applied.	Optional (0-1)	Indicate whether pre-activated accounts can be or cannot be activated due to the request. The possibility to activate a pre-activated account by this flag is configured in the account databases service class configuration. This results in that even if the flag is set to true the account may not be activated.
	transactionCurrency			String, currency	Optional (0-1)	The ID to point out what currency is used for the transaction.
	adjustmentAmountRelative			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807	Optional (0-1)	The amount of the adjustment (positive or negative) to be applied to the account.
	dedicatedAccountUpdateInformation			Sub-MO	Optional (0-n)	Information for updating balances and expiry date for dedicated accounts.
		dedicatedAccountID		Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		productID		Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		adjustmentAmountRelative		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 Unit	Optional (0-1)	The amount of the adjustment (positive or negative) to be applied to the account.
		dedicatedAccountValueNew		String, 0 - 999 999 999 999 Unit	Optional (0-1)	Value to assign to a dedicated account. This is not taking in consideration any ongoing chargeable events.
		adjustmentDateRelative		Integer, -32767 to -1 and 1 to 32767	Optional (0-1)	This parameter is used to make a relative adjustment to the current expiry date. The adjustment can be positive or negative. It is expressed in number of days.
		expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		expiryPamPeriodIndicator		Integer, 1- 100 and 2147483647 2147483647 = no expiry.	Optional (0-1)	the Periodic Account Management period when the offer or DA becomes invalid. When the offer has the capability of storing date and time the time stamp will be set to 00:00:00 or 23:59:59 depending on system configuration.
		startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime.
		adjustmentStartDateRelative		Integer, -999 to -1 and 1 to 999	Optional (0-1)	This parameter is used to make a relative adjustment to the current start date. The adjustment can be positive or negative. It is expressed in number of days.
		startPamPeriodIndicator		Integer, 0 - 99	Optional (0-1)	The startPamPeriodIndicator parameter indicates the Periodic Account Management period when the offer and DA becomes valid. If the offer has the capability of date and time the time stamp will default to 00:00:00. Update of the PAM period indicator on an existing offer will keep the current time stamp unchanged. Time stamp can however be changed by including currentTimeOffset. Zero means that the start date of an offer or a DA is the current date.
		dedicatedAccountUnitType		Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		expiryDateCurrent		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The current expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		startDateCurrent		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The current start date for a dedicated account. Used for validation. No validation is performed if omitted. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		pamServiceID		Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		updateAction		String Enumeration value="EXPIRE"	Optional (0-1)	Indicate which action to take on the resource. EXPIRE = Expire the resource immediately.
	allowCropOfCompositeDedicatedAccounts			Boolean { 0, 1 } 0 (false) = Default value. Do not allow crop. 1 (true) = Allow crop.	Optional (0-1)	Indicate whether it shall be allowed to crop a composite dedicated account
	supervisionExpiryDateRelative			Integer, -32767 to -1 and 1 to 32767	Optional (0-1)	Used to make a relative adjustment to the current supervision expiry date. The adjustment can be positive or negative. It is expressed in number of days.
	supervisionExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of the supervision period.
	serviceFeeExpiryDateRelative			Integer, -32767 to -1 and 1 to 32767	Optional (0-1)	Used to make a relative adjustment to the current service fee expiry date. The adjustment can be positive or negative. It is expressed in number of days.
	serviceFeeExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of the service fee period.
	creditClearancePeriod			Integer, 0 - 1023	Optional (0-1)	The period until credit clearance.
	serviceRemovalPeriod			Integer, 0 - 1023	Optional (0-1)	The period until service removal.
	transactionType			String, 1 - 30 characters	Optional (0-1)	Specify the operation in more detail. It associate a description of a certain operation along with `transactionCode`.
	transactionCode			String, 1 - 30 characters	Optional (0-1)	Specify the operation in more detail. It associate a description of a certain operation along with `transactionType`.
	externalData1			String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
	externalData2			String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
	serviceFeeExpiryDateCurrent			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The current expiry date of the service fee period.
	supervisionExpiryDateCurrent			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The current expiry date of the supervision period.
	serviceClassCurrent			Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
	cellIdentifier			String, 1 - 19 1 - 19 = Numeric 0 - 19 CAP = 14 CGI/SAI	Optional (0-1)	This parameter output the CellGlobal Identity (CGI) or Service Area Identity (SAI). It can be sent as an input parameter through UCIP. If not sent as parameter, this parameter is retrieved from the HLR using ATI request. The cellIdentifier parameter can also be a return parameter through UCIP.
deleteDedicatedAccounts				Sub-MO	Optional (0-1)	The information about the dedicated account to be deleted.
	serviceClassCurrent			Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
	dedicatedAccountIdentifier			Sub-MO	Mandatory	The identifier of the dedicated account to be deleted.
		dedicatedAccountID		Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		productID		Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
promotionCounters				Sub-MO	Optional (0-1)	It returns the current accumulated values used as base for the calculation of when to give a promotion and when to progress a promotion plan.
	transactionCurrency			String, currency	Optional (0-1)	The ID to point out what currency is used for the transaction.
	promotionRefillAmountRelative			String, - 999 999 999 999 to 999 999 999 999	Optional (0-1)	Specifies an amount to be adjusted to the accumulated value of account refills made within the current promotion plan of a subscriber.
	promotionRefillCounterStepRelative			String, -255 to 255	Optional (0-1)	Contains the number of steps to be adjusted to the accumulated number of account refills within the current promotion plan of a subscriber.
	progressionRefillAmountRelative			String, - 999 999 999 999 to 999 999 999 999	Optional (0-1)	Specifies an amount to be adjusted to the accumulated value of account refill for promotion plan progression.
	progressionRefillCounterStepRelative			String, -255 to 255	Optional (0-1)	Contains the number of steps to be adjusted on the accumulated number of account refills for promotion plan progression.
refillBarring				Sub-MO	Optional (0-1)	The information about the refill to be barred.
	refillBarAction			String Enumeration value="CLEAR" Enumeration value="STEP" Enumeration value="BAR"	Mandatory	Describes what action to apply to the refill bar counter. Network Element Type: CLEAR: Clear the counter STEP: Increase counter by one BAR: Immediate barring of refill
	refillUnbarDateTime			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time when a refill barred subscriber is unbarred and is allowed to do a new refill.
subDedicatedAccount				Sub-MO	Optional (0-n)	The information about balances and dates for dedicated accounts.
	transactionCurrency			String, currency	Optional (0-1)	The ID to point out what currency is used for the transaction.
	subDedicatedAccountUpdateInformation			Sub-MO	Mandatory	The information for updating balances and expiry date for sub dedicated accounts.
		dedicatedAccountID		Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		subDedicatedAccountIdentifier		Sub-MO	Mandatory	The information for identifying a unique sub dedicated account.
			startDateCurrent	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	The current start date for a dedicated account. Used for validation. No validation is performed if omitted. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			expiryDateCurrent	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	The current expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		adjustmentAmountRelative		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 Unit	Optional (0-1)	The amount of the adjustment (positive or negative) to be applied to the account.
		subDedicatedAccountValueAbsolute		String, 0 - 9 223 372 036 854 775 807	Optional (0-1)	The units to assign to a sub dedicated account.
		adjustmentDateRelative		Integer, -32767 to -1 and 1 to 32767	Optional (0-1)	This parameter is used to make a relative adjustment to the current expiry date. The adjustment can be positive or negative. It is expressed in number of days.
		expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		expiryPamPeriodIndicator		Integer, 1- 100 and 2147483647 2147483647 = no expiry.	Optional (0-1)	the Periodic Account Management period when the offer or DA becomes invalid. When the offer has the capability of storing date and time the time stamp will be set to 00:00:00 or 23:59:59 depending on system configuration.
		startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		adjustmentStartDateRelative		Integer, -999 to -1 and 1 to 999	Optional (0-1)	This parameter is used to make a relative adjustment to the current start date. The adjustment can be positive or negative. It is expressed in number of days.
		startPamPeriodIndicator		Integer, 0 - 99	Optional (0-1)	The Periodic Account Management period when the offer and DA becomes valid. If the offer has the capability of date and time the time stamp will default to 00:00:00. Update of the PAM period indicator on an existing offer will keep the current time stamp unchanged. Time stamp can however be changed by including currentTimeOffset. Zero means that the start date of an offer or a DA is the current date.
		pamServiceID		Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		expiryDateCurrent		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The current expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		startDateCurrent		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The current start date for a dedicated account. Used for validation. No validation is performed if omitted. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		dedicatedAccountUnitType		Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
	transactionType			String, 1 - 30 characters	Optional (0-1)	Specify the operation in more detail. It associate a description of a certain operation along with `transactionCode`.
	transactionCode			String, 1 - 30 characters	Optional (0-1)	Specify the operation in more detail. It associate a description of a certain operation along with `transactionType`.
	externalData1			String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
	externalData2			String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
usageThresholdsAndCounters				Sub-MO	Optional (0-1)	Information of active usage thresholds and usage counters for a subscriber.
	transactionCurrency			String, currency	Optional (0-1)	The ID to point out what currency is used for the transaction.
	updateUsageCounterForMultiUser			Integer, 1	Optional (0-1)	Indicates that the request should be performed for all subscribers in a multi user account or for the provider and all consumers.
	usageCounterUpdateInformation			Sub-MO	Optional (0-n)	The updated information of the usage counter data
		usageCounterID		Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
		usageCounterValueNew		Integer, 0 - 9 223 372 036 854 775 807	Optional (0-1)	The updated value of a non-monetary usage counter.
		adjustmentUsageCounterValueRelative		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 digits	Optional (0-1)	The adjustment value of a non-monetary usage counter.
		usageCounterMonetaryValueNew		String, 0 - 999 999 999 999 price	Optional (0-1)	The updated value of a monetary usage counter.
		adjustmentUsageCounterMonetaryValueRelative		String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	Indicates the adjustment value of a monetary usage counter.
		associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		productID		Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	usageThresholdUpdateInformation			Sub-MO	Optional (0-n)	The update information of the usage threshold.
		usageThresholdID		Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
		usageThresholdValueNew		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The new value of a non-monetary usage threshold.
		usageThresholdMonetaryValueNew		String, 0 - 999 999 999 999 price	Optional (0-1)	The updated value of a monetary usage threshold.
		associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
negotiatedCapabilities				Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.

4.2 Response Data

4.2.1 Parameters

MOId

Table 14 Set Subscription Parameter
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 15 covers the parameters that can be used in a setSubscription response.

Table 15 Set Subscription Parameter
Parameter			Type	Occurrence	Description
subscriberNumber			String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID			String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
originOperatorID			String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example.
serviceClassCurrent			Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
accountFlagsAfter			Sub-MO	Optional (0-1)	Life cycle state flags of the account, indicating the actual status of the account after.
	activationStatusFlag		Boolean, { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
	negativeBarringStatusFlag		Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
	supervisionPeriodWarningActiveFlag		Boolean, { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
	serviceFeePeriodWarningActiveFlag		Boolean, { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
	supervisionPeriodExpiryFlag		Boolean, { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
	serviceFeePeriodExpiryFlag		Boolean, { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
accountFlagsBefore			Sub-MO	Optional (0-1)	Life cycle state flags of the account, indicating the actual status of the account before.
	activationStatusFlag		Boolean, { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
	negativeBarringStatusFlag		Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
	supervisionPeriodWarningActiveFlag		Boolean, { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
	serviceFeePeriodWarningActiveFlag		Boolean, { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
	supervisionPeriodExpiryFlag		Boolean, { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
	serviceFeePeriodExpiryFlag		Boolean, { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
currency1			String, Currency	Optional (0-1)	The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
currency2			String, Currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
accountPrepaidEmptyLimit1			String, -999 999 999 999 to 999 999 999 999	Optional (0-1)	The lowest allowed balance on an account. It indicates an account balance in the first currency
accountPrepaidEmptyLimit2			String, -999 999 999 999 to 999 999 999 999	Optional (0-1)	The lowest allowed balance on an account. It indicates an account balance in the second currency
chargingResultInformation			Sub-MO	Optional (0-1)	Information for a charged end user communication event.
	Cost1		String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The cost for an event. It indicates a cost in the first currency.
	currency1		String, Currency	Optional (0-1)	The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	Cost 2		String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The cost for an event. It indicates a cost in the second currency.
	currency2		String,Currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	chargingResultCode		Integer, 0 - 2 0 = or not present Successful 1 = No charge (free counter stepped) 2 = No charge (free counter not stepped)	Optional (0-1)	Information related to a charged event.
	reservationCorrelationID		Integer, 0 - 2147483647	Optional (0-1)	The id needed to correlate a reservation.
	chargingResultInformationService				Result information regarding a service for a charged end user communication event
		cost1	String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The cost for an event. It indicates a cost in the first currency.
		cost2	String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The cost for an event. It indicates a cost in the second currency.
periodicAccountManagementData			Sub-MO	Optional (0-n)	Information used for periodic account management.
	pamServiceID		Integer, 0 - 99	Mandatory	The id of the periodic account management service.
	pamClassID		Integer, 0 - 9999	Optional (0-1)	The periodic account management class used by the periodic account management service.
	scheduleID		Integer, 0 - 9999	Optional (0-1)	The schedule that is used by the periodic account management service.
	currentPamPeriod		String, 1 - 30 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Mandatory	The periodic account management period that is currently used for the subscriber.
	deferredToDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The deferred to date for the Periodic Account Management service.
	lastEvaluationDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date of the last periodic account management evaluation.
	pamServicePriority		Integer, 0 - 65535	Optional (0-1)	Indicate the priority between PAM services at PAM evaluation. Lower value gives higher priority.
allowedOptions			Integer, 1- 999 1 = Both incoming and outgoing direction allowed. 2 = Incoming direction allowed. 3 = Outgoing direction allowed.	Optional (0-8)	The value of an allowed option The allowedOption can be repeated up to 8 times for UpdateFaFList Response.
fafMaxAllowedNumbersReachedFlag			Boolean, {0, 1} 0 (false) = Default value. Maximum number of allowed FaF numbers is not reached 1 (true) = Maximum number of allowed FaF numbers is reached.	Optional (0-1)	A flag indicating that it's not allowed to add more FaF numbers to the FaF-list for this subscriber.
fafChangeUnbarDate			DateTime.iso8601	Optional (0-1)	The date when a family and friends change is allowed again. DateTomorrow to DateMax
negativeBalanceBarringDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when a subscriber is scheduled to be barred, or was barred, due to negative balance. Element Value Range: DateMin to DateMax
dedicatedAccountChangeInformation			Sub-MO	Optional (0-n)	Information of changes done to balances and dates for dedicated accounts.
	dedicatedAccountID		Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
	productID		Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
	dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
	expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
	startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
	pamServiceID		Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	offerID		Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
	closestExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
	closestExpiryValue1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
	closestExpiryValue2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
	closestAccessibleDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
	closestAccessibleValue1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
	closestAccessibleValue2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
	dedicatedAccountActiveValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
	dedicatedAccountActiveValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
	subDedicatedAccountChangeInformation		Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
		changedAmount1	String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the first currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
		changedAmount2	String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the second currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
		dedicatedAccountValue1	String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
		dedicatedAccountValue2	String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
		changedExpiryDate	Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
		newExpiryDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new expiry date for a dedicated account.
		clearedExpiryDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous expiry date for a cleared dedicated account. DateMin to DateMax or DateInfinite
		changedStartDate	Integer, -65535 to 65535	Optional (0-1)	The number of days the start date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
		newStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new start date for a dedicated account. DateMin to DateMax or DateBeginningOfTime
		clearedStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous start date for a cleared dedicated account. DateMin to DateMax or DateBeginningOfTime
	dedicatedAccountUnitType		Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
accountValue1			String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The account value for the master account of subscriber. This is not taking in consideration any ongoing chargeable events. It indicates an account value in the first currency.
accountValue2			String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The account value for the master account of subscriber. This is not taking in consideration any ongoing chargeable events. It indicates an account value in the second currency.
usageCounterUsageThresholdInformation			Sub-MO	Optional (0-n)	All active usage counters with their thresholds for a subscriber.
	usageCounterID		Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
	usageCounterValue		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter.
	usageCounterNominalValue		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter, without any factor.
	usageCounterMonetaryValue1		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the first currency.
	usageCounterMonetaryNominalValue1		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the first currency.
	usageCounterMonetaryValue2		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the second currency.
	usageCounterMonetaryNominalValue2		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the second currency.
	usageThresholdInformation		Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
		usageThresholdID	Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
		usageThresholdValue	String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
		usageThresholdMonetaryValue1	String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
		usageThresholdMonetaryValue2	String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
		usageThresholdSource	Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
		associatedPartyID	String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
	associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
	productID		Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
usageThresholdInformation			Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
	usageThresholdID		Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
	usageThresholdValue		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
	usageThresholdMonetaryValue1		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
	usageThresholdMonetaryValue2		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
	usageThresholdSource		Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
	associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
promotionRefillAccumulatedValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of account refills made within the current promotion plan of a subscriber. It indicates the value in the first currency.
promotionRefillAccumulatedValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of account refills made within the current promotion plan of a subscriber. It indicates the value in the second currency.
promotionRefillCounter			Integer, 0 - 255	Optional (0-1)	The accumulated number of account refills within the current promotion plan of a subscriber.
progressionRefillValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of refills for promotion plan progression. It indicates the value in the first currency.
progressionRefillValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of refills for promotion plan progression. It indicates the value in the second currency.
progressionRefillCounter			Integer, 0 - 255	Optional (0-1)	The value of the accumulated number of refills for promotion plan progression.
refillUnbarDateTime			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time when a refill barred subscriber is unbarred and is allowed to do a new refill.
refillFraudCount			Integer, 0 - 255	Optional (0-1)	Contain the number of fraudulent refill attempts left, before the account becomes barred from refill.
dedicatedAccountDeleteInformation			Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
	dedicatedAccountID		Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
	productID		Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
	dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
	expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
	startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
	pamServiceID		Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	offerID		Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
	subDedicatedAccountInformation		Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
		dedicatedAccountValue1	String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
		dedicatedAccountValue2	String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
		startDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDate	Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
	dedicatedAccountUnitType		Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
negotiatedCapabilities			Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities			Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

4.3 Examples

4.3.1 Example of Updating Account Details

This section gives an example of the setSubscription request and response message. This example shows how to update Account Details for a subscriber.

Request Example

Example 22 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>8298219224044d389372c5850deeef8e</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
<cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getSubscription subscriberNumber="465273152000001">
               <air:allowedServiceClasses>
                  <air:serviceClassCurrent>100</air:serviceClassCurrent>
               </air:allowedServiceClasses>
<air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
            </air:getSubscription>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 23 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>8298219224044d389372c5850deeef8e</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:getSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
<air:originTransactionID>14462116962525038412</air:originTransactionID>
               <air:allowedServiceClasses>
                  <air:serviceClassCurrent>111</air:serviceClassCurrent>
               </air:allowedServiceClasses>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
<air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:getSubscriptionResponse>
         </MOAttributes>
      </GetResponse>
   </S:Body>
</S:Envelope>

4.3.2 Example of Adding Promotion Plan

This section gives an example of the setSubscription request and response message. This example shows how to add Promotion Plan for a subscriber.

Request Example

Example 24 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>8353a8293d454b4a98945e85eadb0ef2</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000010</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000010">
               <air:originNodeType>ADM</air:originNodeType>
               <air:originHostName>node1</air:originHostName>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:promotionPlan promotionPlanID="3">
                  <air:promotionPlanID>3</air:promotionPlanID>
                  <air:promotionPlanIDCurrent>2</air:promotionPlanIDCurrent>
                  <air:promotionOldStartDate>2013-09-26T06:44:01+01:00
                   </air:promotionOldStartDate>
                  <air:promotionOldEndDate>2015-09-26T06:44:01+01:00
                   </air:promotionOldEndDate>
                  <air:promotionStartDate>2019-09-26T06:44:01+01:00
                  </air:promotionStartDate>
                  <air:promotionEndDate>2020-09-26T06:44:01+01:00
                  </air:promotionEndDate>
               </air:promotionPlan>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 25 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>8353a8293d454b4a98945e85eadb0ef2</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000010</air:subscriberNumber>
               <air:originTransactionID>14416985238478365358</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.3 Example of Setting Promotion Plan

This section gives an example of the setSubscription request and response message. This example shows how to set the Promotion Plan for a subscriber.

Request Example

Example 26 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>8353a8293d454b4a98945e85eadb0ef2</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000010</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000010">
               <air:originNodeType>ADM</air:originNodeType>
               <air:originHostName>node1</air:originHostName>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:promotionPlan promotionPlanID="2">
                  <air:promotionOldStartDate>
                     2013-09-26T06:44:01+01:00
                  </air:promotionOldStartDate>
                  <air:promotionOldEndDate>
                     2015-09-26T06:44:01+01:00
                  </air:promotionOldEndDate>
                  <air:promotionStartDate>
                     2014-09-26T06:44:01+01:00
                  </air:promotionStartDate>
                  <air:promotionEndDate>
                     2015-09-26T06:44:01+01:00
                  </air:promotionEndDate>
               </air:promotionPlan>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 27 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>8353a8293d454b4a98945e85eadb0ef2</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000010</air:subscriberNumber>
               <air:originTransactionID>14416999892341471075</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.4 Example of Deleting Promotion Plan

This section gives an example of the setSubscription request and response message. This example shows how to delete the Promotion Plan from a subscriber.

Request Example

Example 28 Set Subscription Request Message

<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>8353a8293d454b4a98945e85eadb0ef2</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000010024</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000010024">
               <air:originNodeType>ADM</air:originNodeType>
               <air:originHostName>node1</air:originHostName>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:promotionPlan promotionPlanID="2" xsi:nil="true"></air:promotionPlan>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 29 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>8353a8293d454b4a98945e85eadb0ef2</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000010024</air:subscriberNumber>
               <air:originTransactionID>14417862771269132072</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.5 Example of Adding Family and Friends Number List

This section gives an example of the setSubscription request and response message. This example shows how to add Family and Friends Number List for a subscriber.

Request Example

Example 30 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>ffc1b6d5068447b5b674d85602cc13b4</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:faf fafNumber="0703105000" owner="Account">
                  <air:fafNumber>0703105000</air:fafNumber>
                  <air:owner>Account</air:owner>
                  <air:fafIndicator>65535</air:fafIndicator>
               </air:faf>
               <air:faf fafNumber="0703105000" owner="Subscriber">
                  <air:fafNumber>0703105000</air:fafNumber>
                  <air:owner>Subscriber</air:owner>
                  <air:fafIndicator>65535</air:fafIndicator>
               </air:faf>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 31 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>ffc1b6d5068447b5b674d85602cc13b4</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14419583159563036520</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.6 Example of Setting Family and Friends Number List

This section gives an example of the setSubscription request and response message. This example shows how to set Family and Friends Number List for a subscriber.

Request Example

Example 32 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/" >
   <soapenv:Header>
      <cai3:SessionId>ffc1b6d5068447b5b674d85602cc13b4</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>16100001001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="16100001001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>               
               <air:faf fafNumber="0703101003" owner="Subscriber">
                  <air:fafIndicator>1003</air:fafIndicator>
               </air:faf>              
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 33 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>ffc1b6d5068447b5b674d85602cc13b4</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>16100001001</air:subscriberNumber>
               <air:originTransactionID>14419583171941301003</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.7 Example of Deleting Family and Friends Number List

This section gives an example of the setSubscription request and response message. This example shows how to delete Family and Friends Number List from a subscriber.

Request Example

Example 34 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/" 
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <soapenv:Header>
      <cai3:SessionId>ffc1b6d5068447b5b674d85602cc13b4</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:faf fafNumber="0703105000" owner="Account" xsi:nil="true"/>
               <air:faf fafNumber="0703105000" owner="Subscriber" xsi:nil="true"/>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 35 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>ffc1b6d5068447b5b674d85602cc13b4</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14419583180022020087</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.8 Example of Updating Service Classes

This section gives an example of the setSubscription request an d response message. This example shows how to update Service Classes for a subscriber.

Request Example

Example 36 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>e77cc74b16374525ac89dff7fd3ca4c6</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000010</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000010">
               <air:originNodeType>ADM</air:originNodeType>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:serviceClass>
                  <air:serviceClassAction>SetOriginal</air:serviceClassAction>
                  <air:serviceClassCurrent>111</air:serviceClassCurrent>
                  <air:serviceClassNew>112</air:serviceClassNew>
                  <air:serviceClassValidationFlag>0</air:serviceClassValidationFlag>
                  <air:externalData1>externaldata1</air:externalData1>
                  <air:externalData2>externaldata2</air:externalData2>
                  <air:chargingRequestInformation>
                     <air:chargingType>1</air:chargingType>
                     <air:chargingIndicator>1</air:chargingIndicator>
                     <air:reservationCorrelationID>2147483647</air:reservationCorrelationID>
                  </air:chargingRequestInformation>
               </air:serviceClass>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 37 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>e77cc74b16374525ac89dff7fd3ca4c6</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000010</air:subscriberNumber>
               <air:originTransactionID>14400530413366575140</air:originTransactionID>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.9 Example of Updating Temporary Service Classes

This section gives an example of the setSubscription request and response message. This example shows how to update Temporary Service Classes for a subscriber.

Request Example

Example 38 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>e77cc74b16374525ac89dff7fd3ca4c6</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000010</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000010">
               <air:originNodeType>ADM</air:originNodeType>
               <air:originHostName>node1</air:originHostName>
               <air:originTransactionID>14400530413366575140</air:originTransactionID>
               <air:originTimeStamp>2015-08-20T06:44:01+01:00</air:originTimeStamp>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:originOperatorID>operator</air:originOperatorID>
               <air:serviceClass>
                  <air:serviceClassAction>SetTemporary</air:serviceClassAction>
                  <air:serviceClassTemporary>113</air:serviceClassTemporary>
                  <air:serviceClassTemporaryExpiryDate>
                     2015-10-20T06:44:01+01:00
                  </air:serviceClassTemporaryExpiryDate>
                  <air:serviceClassTemporaryNew>114</air:serviceClassTemporaryNew>
                  <air:serviceClassTemporaryNewExpiryDate>
                     2015-10-20T06:44:01+01:00
                  </air:serviceClassTemporaryNewExpiryDate>
                  <air:serviceClassValidationFlag>0</air:serviceClassValidationFlag>
                  <air:externalData1>external1</air:externalData1>
                  <air:externalData2>external2</air:externalData2>
                  <air:chargingRequestInformation>
                     <air:chargingType>1</air:chargingType>
                     <air:chargingIndicator>1</air:chargingIndicator>
                     <air:reservationCorrelationID>2147483647</air:reservationCorrelationID>
                  </air:chargingRequestInformation>
               </air:serviceClass>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 39 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>e77cc74b16374525ac89dff7fd3ca4c6</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000010</air:subscriberNumber>
               <air:originTransactionID>14400530413366575140</air:originTransactionID>
               <air:originOperatorID>operator</air:originOperatorID>
               <air:accountFlagsAfter>
                  <air:activationStatusFlag>0</air:activationStatusFlag>
                  <air:negativeBarringStatusFlag>0</air:negativeBarringStatusFlag>
                  <air:supervisionPeriodWarningActiveFlag>0</air:supervisionPeriodWarningActiveFlag>
                  <air:serviceFeePeriodWarningActiveFlag>0</air:serviceFeePeriodWarningActiveFlag>
                  <air:supervisionPeriodExpiryFlag>0</air:supervisionPeriodExpiryFlag>
                  <air:serviceFeePeriodExpiryFlag>0</air:serviceFeePeriodExpiryFlag>
               </air:accountFlagsAfter>
               <air:accountFlagsBefore>
                  <air:activationStatusFlag>0</air:activationStatusFlag>
                  <air:negativeBarringStatusFlag>0</air:negativeBarringStatusFlag>
                  <air:supervisionPeriodWarningActiveFlag>0</air:supervisionPeriodWarningActiveFlag>
                  <air:serviceFeePeriodWarningActiveFlag>0</air:serviceFeePeriodWarningActiveFlag>
                  <air:supervisionPeriodExpiryFlag>0</air:supervisionPeriodExpiryFlag>
                  <air:serviceFeePeriodExpiryFlag>0</air:serviceFeePeriodExpiryFlag>
               </air:accountFlagsBefore>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.10 Example of Updating Community List

This section gives an example of the setSubscription request and response message. This example shows how to update Community List for a subscriber.

Request Example 1

Example 40 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>f35c9c9541064704bdacf099e88fed10</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000010</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000010">
               <air:communityInformationCurrent>2,1</air:communityInformationCurrent>
               <air:communityInformationNew>1,2,3</air:communityInformationNew>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example 1

Example 41 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>f35c9c9541064704bdacf099e88fed10</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000010</air:subscriberNumber>
               <air:originTransactionID>14423792128496507931</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

Request Example 2

Example 42 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>f35c9c9541064704bdacf099e88fed10</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000010</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000010">
               <air:communityInformationCurrent>3,2,5</air:communityInformationCurrent>
               <air:communityInformationUpdate>              
                  <air:communityInformationAdd>15</air:communityInformationAdd>
                  <air:communityInformationDelete>2,3</air:communityInformationDelete>
               </air:communityInformationUpdate>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 43 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>f35c9c9541064704bdacf099e88fed10</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000010</air:subscriberNumber>
               <air:originTransactionID>14423847482453593884</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.11 Example of Updating Temporary Blocked

This section gives an example of the setSubscription request and response message. This example shows how to update Temporary Blocked for a subscriber.

Request Example

Example 44 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>b1d212056dfb458e95daf0f652817e26</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:temporaryBlockedFlag>1</air:temporaryBlockedFlag>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 45 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>b1d212056dfb458e95daf0f652817e26</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14417897176209634802</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.12 Example of Updating Subscriber Segment

This section gives an example of the setSubscription request and response message. This example shows how to update Subscriber Segment for a subscriber.

Request Example 1

Example 46 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>75738e5d12544f1f90417f5359229ffe</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:accountGroupID>11</air:accountGroupID>
               <air:serviceOfferings>
                  <air:serviceOfferingID>1</air:serviceOfferingID>
                  <air:serviceOfferingActiveFlag>1</air:serviceOfferingActiveFlag>
               </air:serviceOfferings>
               <air:serviceOfferings>
                  <air:serviceOfferingID>2</air:serviceOfferingID>
                  <air:serviceOfferingActiveFlag>1</air:serviceOfferingActiveFlag>
               </air:serviceOfferings>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example1

Example 47 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>75738e5d12544f1f90417f5359229ffe</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>1442389963776495208</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

Request Example 2

Example 48 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>75738e5d12544f1f90417f5359229ffe</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:accountGroupID>22</air:accountGroupID>
               <air:serviceOfferingsValue>
                  <air:serviceOfferingsValueAdd>8,16</air:serviceOfferingsValueAdd>
                  <air:serviceOfferingsValueDelete>2,8</air:serviceOfferingsValueDelete>
                  <air:serviceOfferingsValueCurrent>15</air:serviceOfferingsValueCurrent>
               </air:serviceOfferingsValue>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example 2

Example 49 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>75738e5d12544f1f90417f5359229ffe</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14423899734202446566</air:originTransactionID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.13 Example of Adding Periodic Account Management Data

This section gives an example of the setSubscription request and response message. This example shows how to add Periodic Account Management Data for a subscriber.

Request Example

Example 50 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>aec38f67bb85422cadf1256a73ccdbaa</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:originOperatorID>operator111</air:originOperatorID>
               <air:periodicAccountManagementData pamServiceID="11">
                  <air:pamServiceID>11</air:pamServiceID>
                  <air:pamClassID>21</air:pamClassID>
                  <air:scheduleID>21</air:scheduleID>
               </air:periodicAccountManagementData>
               <air:periodicAccountManagementData pamServiceID="99">
                  <air:pamServiceID>99</air:pamServiceID>
                  <air:pamClassID>99</air:pamClassID>
                  <air:scheduleID>222</air:scheduleID>
                  <air:currentPamPeriod>pid-2015-10-1/a/b/c</air:currentPamPeriod>
                  <air:deferredToDate>2015-10-08T12:00:00+00:00</air:deferredToDate>
                  <air:pamServicePriority>65535</air:pamServicePriority>
               </air:periodicAccountManagementData>              
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 51 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>aec38f67bb85422cadf1256a73ccdbaa</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14416947487057163409</air:originTransactionID>
               <air:originOperatorID>operator111</air:originOperatorID>
               <air:periodicAccountManagementData>
                  <air:pamServiceID>11</air:pamServiceID>
                  <air:currentPamPeriod>pid-21-20160907</air:currentPamPeriod>
               </air:periodicAccountManagementData>
               <air:periodicAccountManagementData>
                  <air:pamServiceID>99</air:pamServiceID>
                  <air:currentPamPeriod>pid-2015-10-1/a/b/c</air:currentPamPeriod>
               </air:periodicAccountManagementData>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.14 Example of Setting Periodic Account Management Data

This section gives an example of the setSubscription request and response message. This example shows how to set the Periodic Account Management Data for a subscriber.

Request Example

Example 52 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/" 
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <soapenv:Header>
      <cai3:SessionId>aec38f67bb85422cadf1256a73ccdbaa</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000002</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000002">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:periodicAccountManagementData pamServiceID="99">
                  <air:currentPamPeriod>pid-1003-1//x/y/z</air:currentPamPeriod>
                  <air:deferredToDate>2019-12-31T12:12:31-06:00</air:deferredToDate>
                  <air:pamServicePriority>99</air:pamServicePriority>
                  <air:pamServicePriorityCurrent>222</air:pamServicePriorityCurrent>
               </air:periodicAccountManagementData>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 53 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>aec38f67bb85422cadf1256a73ccdbaa</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000002</air:subscriberNumber>
               <air:originTransactionID>14416947501628497009</air:originTransactionID>
               <air:periodicAccountManagementData>
                  <air:pamServiceID>99</air:pamServiceID>
                  <air:currentPamPeriod>pid-1003-1//x/y/z</air:currentPamPeriod>
               </air:periodicAccountManagementData>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.15 Example of Deleting Periodic Account Management Data

This section gives an example of the setSubscription request and response message. This example shows how to delete Periodic Account Management Data for a subscriber.

Request Example

Example 54 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/" 
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <soapenv:Header>
      <cai3:SessionId>bd149057ac0941dfb77b53e198c6b3f0</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:originOperatorID>operator111</air:originOperatorID>
               <air:periodicAccountManagementData pamServiceID="11" xsi:nil="true"/>
               <air:periodicAccountManagementData pamServiceID="99" xsi:nil="true"/>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 55 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>bd149057ac0941dfb77b53e198c6b3f0</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14416947490109139963</air:originTransactionID>
               <air:originOperatorID>operator111</air:originOperatorID>
               <air:periodicAccountManagementData>
                  <air:pamServiceID>11</air:pamServiceID>
                  <air:pamClassID>21</air:pamClassID>
                  <air:scheduleID>21</air:scheduleID>
                  <air:currentPamPeriod>pid-21-20160907</air:currentPamPeriod>
                  <air:pamServicePriority>0</air:pamServicePriority>
               </air:periodicAccountManagementData>
               <air:periodicAccountManagementData>
                  <air:pamServiceID>99</air:pamServiceID>
                  <air:pamClassID>99</air:pamClassID>
                  <air:scheduleID>222</air:scheduleID>
                  <air:currentPamPeriod>pid-2015-10-1/a/b/c</air:currentPamPeriod>
                  <air:deferredToDate>2015-10-08T12:00:00+00:00</air:deferredToDate>
                  <air:pamServicePriority>65535</air:pamServicePriority>
               </air:periodicAccountManagementData>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.16 Example of Updating the Balance and Date Information

This section gives an example of the setSubscription request and response message. This example shows how to update Balance and Date Information for a subscriber.

Request Example

Example 56 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>b4255a3261484ba4989daf4dbecd4aa8</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:balanceAndDate>
                  <air:messageCapabilityFlag>
<air:promotionNotificationFlag>1</air:promotionNotificationFlag>
                     <air:firstIVRCallSetFlag>1</air:firstIVRCallSetFlag>
                     <air:accountActivationFlag>1</air:accountActivationFlag>
                  </air:messageCapabilityFlag>
                  <air:transactionCurrency>SEK</air:transactionCurrency>
                  <air:adjustmentAmountRelative>-1000</air:adjustmentAmountRelative>
<air:supervisionExpiryDateRelative>1</air:supervisionExpiryDateRelative>
<air:serviceFeeExpiryDateRelative>1</air:serviceFeeExpiryDateRelative>
                  <air:creditClearancePeriod>0</air:creditClearancePeriod>
                  <air:serviceRemovalPeriod>0</air:serviceRemovalPeriod>
                  <air:transactionType>SCC</air:transactionType>
                  <air:transactionCode>EUC</air:transactionCode>
                  <air:externalData1>exData1</air:externalData1>
                  <air:externalData2>exData2</air:externalData2>
               </air:balanceAndDate>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 57 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>b4255a3261484ba4989daf4dbecd4aa8</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
          <air:originTransactionID>14467063394586463924</air:originTransactionID>
               <air:accountFlagsAfter>
                  <air:activationStatusFlag>1</air:activationStatusFlag>
<air:negativeBarringStatusFlag>0</air:negativeBarringStatusFlag>
<air:supervisionPeriodWarningActiveFlag>0</air:supervisionPeriodWarningActiveFlag>
                  <air:serviceFeePeriodWarningActiveFlag>0</air:serviceFeePeriodWarningActiveFlag>
<air:supervisionPeriodExpiryFlag>0</air:supervisionPeriodExpiryFlag>
<air:serviceFeePeriodExpiryFlag>0</air:serviceFeePeriodExpiryFlag>
               </air:accountFlagsAfter>
               <air:accountFlagsBefore>
                  <air:activationStatusFlag>1</air:activationStatusFlag>
<air:negativeBarringStatusFlag>0</air:negativeBarringStatusFlag>
<air:supervisionPeriodWarningActiveFlag>0</air:supervisionPeriodWarningActiveFlag>
<air:serviceFeePeriodWarningActiveFlag>0</air:serviceFeePeriodWarningActiveFlag>
<air:supervisionPeriodExpiryFlag>0</air:supervisionPeriodExpiryFlag>
<air:serviceFeePeriodExpiryFlag>0</air:serviceFeePeriodExpiryFlag>
               </air:accountFlagsBefore>
               <air:currency1>SEK</air:currency1>
               <air:accountValue1>12000</air:accountValue1>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
<air:availableServerCapabilities>805646916</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.17 Example of Updating Usage Thresholds and Counters

This section gives an example of the setSubscription request and response message. This example shows how to update Usage Thresholds and Counters for a subscriber.

Request Example

Example 58 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>fdcda745c7bc42c4b2aff709c66b5879</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001" 
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:usageThresholdsAndCounters>
                  <air:transactionCurrency>SEK</air:transactionCurrency>
                  <air:updateUsageCounterForMultiUser>1</air:updateUsageCounterForMultiUser>
                  <air:usageCounterUpdateInformation>
                     <air:usageCounterID>1</air:usageCounterID>
                     <air:usageCounterValueNew>0</air:usageCounterValueNew>
                     <air:associatedPartyID>001</air:associatedPartyID>
                     <air:productID>1</air:productID>
                  </air:usageCounterUpdateInformation>
                  <air:usageCounterUpdateInformation>
                     <air:usageCounterID>2</air:usageCounterID>
                     <air:adjustmentUsageCounterValueRelative>-100</air:adjustmentUsageCounterValueRelative>
                     <air:associatedPartyID>002</air:associatedPartyID>
                    </air:usageCounterUpdateInformation>
                  <air:usageCounterUpdateInformation>
                     <air:usageCounterID>3</air:usageCounterID>
                     <air:usageCounterMonetaryValueNew>0</air:usageCounterMonetaryValueNew>
                     <air:productID>2</air:productID>
                  </air:usageCounterUpdateInformation>
                  <air:usageCounterUpdateInformation>
                     <air:usageCounterID>4</air:usageCounterID>
                     <air:adjustmentUsageCounterMonetaryValueRelative>
                       -999999999999
                     </air:adjustmentUsageCounterMonetaryValueRelative>
                  </air:usageCounterUpdateInformation>                                                      
                  <air:usageThresholdUpdateInformation usageThresholdID="1">
                     <air:usageThresholdValueNew>0</air:usageThresholdValueNew>
                     <air:associatedPartyID>1</air:associatedPartyID>
                  </air:usageThresholdUpdateInformation>
                  <air:usageThresholdUpdateInformation usageThresholdID="2">
                     <air:usageThresholdMonetaryValueNew>0</air:usageThresholdMonetaryValueNew>
                  </air:usageThresholdUpdateInformation>
               </air:usageThresholdsAndCounters>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 59 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>fdcda745c7bc42c4b2aff709c66b5879</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14476335267953221512</air:originTransactionID>
               <air:currency1>SEK</air:currency1>
               <air:usageCounterUsageThresholdInformation>
                  <air:usageCounterID>1</air:usageCounterID>
                  <air:usageCounterValue>100</air:usageCounterValue>
                  <air:usageCounterNominalValue>0</air:usageCounterNominalValue>
                  <air:usageThresholdInformation>
                     <air:usageThresholdID>1</air:usageThresholdID>
                     <air:usageThresholdValue>0</air:usageThresholdValue>
                     <air:usageThresholdSource>1</air:usageThresholdSource>
                     <air:associatedPartyID>1</air:associatedPartyID>
                  </air:usageThresholdInformation>
                  <air:usageThresholdInformation>
                     <air:usageThresholdID>2</air:usageThresholdID>
                     <air:usageThresholdMonetaryValue1>0</air:usageThresholdMonetaryValue1>
                     <air:usageThresholdMonetaryValue2>999999999999</air:usageThresholdMonetaryValue2>
                     <air:usageThresholdSource>1</air:usageThresholdSource>
                  </air:usageThresholdInformation>
                  <air:associatedPartyID>001</air:associatedPartyID>
                  <air:productID>1</air:productID>
               </air:usageCounterUsageThresholdInformation>
               <air:usageCounterUsageThresholdInformation>
                  <air:usageCounterID>2</air:usageCounterID>
                  <air:usageCounterMonetaryValue1>0</air:usageCounterMonetaryValue1>
                  <air:usageCounterMonetaryNominalValue1>0</air:usageCounterMonetaryNominalValue1>
                  <air:usageCounterMonetaryValue2>999999999999</air:usageCounterMonetaryValue2>
                  <air:usageCounterMonetaryNominalValue2>999999999999</air:usageCounterMonetaryNominalValue2>
                  <air:usageThresholdInformation>
                     <air:usageThresholdID>3</air:usageThresholdID>
                     <air:usageThresholdMonetaryValue1>0</air:usageThresholdMonetaryValue1>
                     <air:usageThresholdSource>1</air:usageThresholdSource>
                  </air:usageThresholdInformation>
               </air:usageCounterUsageThresholdInformation>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.18 Example of Deleting a Usage Thresholds

This section gives an example of the setSubscription request and response message. This example shows how to delete a Usage Thresholds of a subscriber.

Request Example

Example 60 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>e8d576f2cfbe4c339db0e4bfc741df29</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001"
 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:usageThresholdsAndCounters>
                  <air:transactionCurrency>SEK</air:transactionCurrency>
                  <air:updateUsageCounterForMultiUser>1</air:updateUsageCounterForMultiUser>
                    <air:usageThresholdUpdateInformation usageThresholdID="1" xsi:nil="true"/>
                  <air:usageThresholdUpdateInformation usageThresholdID="2" xsi:nil="true"/>                  
               </air:usageThresholdsAndCounters>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 61 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>e8d576f2cfbe4c339db0e4bfc741df29</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14476337020188483188</air:originTransactionID>
               <air:currency1>SEK</air:currency1>
               <air:usageThresholdInformation>
                  <air:usageThresholdID>1</air:usageThresholdID>
                  <air:usageThresholdMonetaryValue1>0</air:usageThresholdMonetaryValue1>
                  <air:usageThresholdSource>1</air:usageThresholdSource>
               </air:usageThresholdInformation>
               <air:usageThresholdInformation>
                  <air:usageThresholdID>2</air:usageThresholdID>
                  <air:usageThresholdValue>0</air:usageThresholdValue>
                  <air:usageThresholdSource>1</air:usageThresholdSource>
               </air:usageThresholdInformation>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.19 Example of Updating Promotion Counters

This section gives an example of the setSubscription request and response message. This example shows how to update Promotion Counters for a subscriber.

Request Example

Example 62 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>40550c9774f142a9ac0fdaf40c207b98</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000001">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:promotionCounters>
                  <air:transactionCurrency>SEK</air:transactionCurrency>
                  <air:promotionRefillAmountRelative>
                     999999999999
                  </air:promotionRefillAmountRelative>               
                  <air:progressionRefillAmountRelative>
                     999999999999
                  </air:progressionRefillAmountRelative>
               </air:promotionCounters>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 63 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>40550c9774f142a9ac0fdaf40c207b98</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14471328837187422743</air:originTransactionID>
               <air:originOperatorID>sdz</air:originOperatorID>
               <air:currency1>SEK</air:currency1>
               <air:promotionRefillAccumulatedValue1>
                  999999999999
               </air:promotionRefillAccumulatedValue1>
               <air:promotionRefillCounter>0</air:promotionRefillCounter>
               <air:progressionRefillValue1>999999999999</air:progressionRefillValue1>
               <air:progressionRefillCounter>0</air:progressionRefillCounter>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>805646916</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.20 Example of Updating Refill Barring

This section gives an example of the setSubscription request and response message. This example shows how to update Refill Barring for a subscriber.

Request Example

Example 64 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
	<soapenv:Header>
		<cai3:SessionId>e240d11d047a49aaa04e1d4959a8fd69</cai3:SessionId>
	</soapenv:Header>
	<soapenv:Body>
		<cai3:Set>
			<cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
			<cai3:MOId>
	<air:subscriberNumber>465273152000003</air:subscriberNumber>
			</cai3:MOId>
			<cai3:MOAttributes>
				<air:setSubscription subscriberNumber="465273152000003">
	<air:subscriberNumberNAI>1</air:subscriberNumberNAI>
					<air:refillBarring>
	<air:refillBarAction>BAR</air:refillBarAction>
						<air:refillUnbarDateTime>2016-11-20T06:44:01+01:00</air:refillUnbarDateTime>
					</air:refillBarring>
					<air:negotiatedCapabilities>0</air:negotiatedCapabilities>
				</air:setSubscription>
			</cai3:MOAttributes>
		</cai3:Set>
	</soapenv:Body>
</soapenv:Envelope>

Response Example

Example 65 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>e240d11d047a49aaa04e1d4959a8fd69</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000003</air:subscriberNumber>
               <air:originTransactionID>14478359630645647626</air:originTransactionID>
               <air:refillUnbarDateTime>2016-11-20T06:44:01+01:00</air:refillUnbarDateTime>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.21 Example of Updating the SubDedicate Account

This section gives an example of the setSubscription request and response message. This example shows how to update the SubDedicate Account for a subscriber.

Request Example

Example 66 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>238ea94132af49bea24dd2a9f97c00c2</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000002</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000002">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:subDedicatedAccount>
                  <air:transactionCurrency>SEK</air:transactionCurrency>
                  <air:subDedicatedAccountUpdateInformation>
                     <air:dedicatedAccountID>21</air:dedicatedAccountID>
                     <air:subDedicatedAccountIdentifier>
                        <air:startDateCurrent>2015-11-01T01:00:00+00:00</air:startDateCurrent>
                        <air:expiryDateCurrent>2015-12-20T01:00:00+00:00</air:expiryDateCurrent>
                     </air:subDedicatedAccountIdentifier>
<air:adjustmentAmountRelative>999</air:adjustmentAmountRelative>
<air:adjustmentDateRelative>1000</air:adjustmentDateRelative>
                     <air:startDate>2015-10-08T12:12:12+02:00</air:startDate>
                     <air:pamServiceID>99</air:pamServiceID>
                     <air:expiryDateCurrent>2015-12-20T12:00:00+00:00</air:expiryDateCurrent>
                     <air:startDateCurrent>2015-10-23T12:00:00+00:00</air:startDateCurrent>
                     <air:dedicatedAccountUnitType>1</air:dedicatedAccountUnitType>
                  </air:subDedicatedAccountUpdateInformation>
                  <air:transactionType>SCC</air:transactionType>
                  <air:transactionCode>EUC</air:transactionCode>
                  <air:externalData1>exData1</air:externalData1>
                  <air:externalData2>exData2</air:externalData2>
               </air:subDedicatedAccount>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 67 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>238ea94132af49bea24dd2a9f97c00c2</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000002</air:subscriberNumber>
               <air:originTransactionID>14471328837187422743</air:originTransactionID>
               <air:originOperatorID>sdz</air:originOperatorID>
               <air:currency1>SEK</air:currency1>
               <air:dedicatedAccountChangeInformation>
                  <air:dedicatedAccountID>21</air:dedicatedAccountID>
                  <air:productID>21</air:productID>
                  <air:dedicatedAccountValue1>21</air:dedicatedAccountValue1>
                  <air:dedicatedAccountValue2>22</air:dedicatedAccountValue2>
                  <air:expiryDate>2015-12-20T12:00:00+00:00</air:expiryDate>
                  <air:startDate>2015-10-08T12:12:12+02:00</air:startDate>
                  <air:pamServiceID>99</air:pamServiceID>
                  <air:offerID>99</air:offerID>
                  <air:closestExpiryDate>2015-10-08T12:12:12+02:00</air:closestExpiryDate>
                  <air:closestExpiryValue1>99</air:closestExpiryValue1>
                  <air:closestExpiryValue2>100</air:closestExpiryValue2>
                  <air:closestAccessibleDate>2015-11-01T01:00:00+00:00</air:closestAccessibleDate>
                  <air:closestAccessibleValue1>103</air:closestAccessibleValue1>
                  <air:closestAccessibleValue2>102</air:closestAccessibleValue2>
                  <air:dedicatedAccountActiveValue1>105</air:dedicatedAccountActiveValue1>
                  <air:dedicatedAccountActiveValue2>106</air:dedicatedAccountActiveValue2>
                  <air:subDedicatedAccountChangeInformation>
                     <air:changedAmount1>110</air:changedAmount1>
                     <air:changedAmount2>112</air:changedAmount2>
                     <air:dedicatedAccountValue1>21</air:dedicatedAccountValue1>
                     <air:dedicatedAccountValue2>22</air:dedicatedAccountValue2>
                     <air:changedExpiryDate>25</air:changedExpiryDate>
                     <air:newExpiryDate>2011-01-18T14:15:21+02:00</air:newExpiryDate>
                     <air:clearedExpiryDate>2015-11-01T01:00:00+00:00</air:clearedExpiryDate>
                     <air:changedStartDate>25</air:changedStartDate>
                     <air:newStartDate>2011-01-18T14:15:21+02:00</air:newStartDate>
                     <air:clearedStartDate>2015-11-01T01:00:00+00:00</air:clearedStartDate>
                  </air:subDedicatedAccountChangeInformation>
                  <air:dedicatedAccountUnitType>1</air:dedicatedAccountUnitType>
               </air:dedicatedAccountChangeInformation>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>805646916</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

4.3.22 Example of Deleting the Dedicate Account

This section gives an example of the setSubscription request and response message. This example shows how to update the Dedicate Account for a subscriber.

Request Example

Example 68 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>2c9389000c2c4af0b2a5977e41704954</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000002</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setSubscription subscriberNumber="465273152000002">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:deleteDedicatedAccounts>
                  <air:serviceClassCurrent>21</air:serviceClassCurrent>
                  <air:dedicatedAccountIdentifier>
                     <air:dedicatedAccountID>21</air:dedicatedAccountID>
                     <air:expiryDate>2015-12-20T01:00:00+00:00</air:expiryDate>
                     <air:productID>21</air:productID>
                  </air:dedicatedAccountIdentifier>
               </air:deleteDedicatedAccounts>
               <air:negotiatedCapabilities>64</air:negotiatedCapabilities>
            </air:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 69 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>2c9389000c2c4af0b2a5977e41704954</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000002</air:subscriberNumber>
               <air:originTransactionID>14416947486266349809</air:originTransactionID>
               <air:originOperatorID>gzg</air:originOperatorID>
               <air:currency1>SEK</air:currency1>
               <air:dedicatedAccountDeleteInformation>
                  <air:dedicatedAccountID>21</air:dedicatedAccountID>
                  <air:productID>21</air:productID>
                  <air:dedicatedAccountValue1>211</air:dedicatedAccountValue1>
                  <air:dedicatedAccountValue2>212</air:dedicatedAccountValue2>
                  <air:expiryDate>2015-12-01T01:00:00+00:00</air:expiryDate>
                  <air:startDate>2015-11-01T01:00:00+00:00</air:startDate>
                  <air:pamServiceID>21</air:pamServiceID>
                  <air:offerID>213</air:offerID>
                  <air:subDedicatedAccountInformation>
                     <air:dedicatedAccountValue1>21</air:dedicatedAccountValue1>
                     <air:dedicatedAccountValue2>212</air:dedicatedAccountValue2>
                     <air:startDate>2015-11-01T01:00:00+00:00</air:startDate>
                     <air:expiryDate>2015-12-01T01:00:00+00:00</air:expiryDate>
                  </air:subDedicatedAccountInformation>
                  <air:dedicatedAccountUnitType>1</air:dedicatedAccountUnitType>
               </air:dedicatedAccountDeleteInformation>
               <air:negotiatedCapabilities>64</air:negotiatedCapabilities>
               <air:availableServerCapabilities>805646916</air:availableServerCapabilities>
            </air:setSubscriptionResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

5 Delete AIR Subscription

This section covers the AIR command deleteSubscription.

MOType

Subscription@http://schemas.ericsson.com/ma/CS/AIR/

5.1 Request Data

5.1.1 Parameters

MOId

Table 16 Delete Subscription MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 17 covers the parameters that can be used in a deleteSubscription request.

Table 17 Delete Subscription Parameters
Parameter	Type	Occurrence	Description
originNodeType	String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs
originHostName	String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate PGN node name, which the character "-" replaced by "" as the parameter to NEs
originTransactionID	String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill. If this parameter is absent from the request, Dynamic Activation will generate System time milliseconds plus seven ramdon digital numbers as the parameter to NEs.
originTimeStamp	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation. If this parameter is absent from the request, Dynamic Activation will generate PGN system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic
subscriberNumberNAI	Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
originOperatorID	String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate the default "operator" or the configured `OriginOperatorId` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic configure.
deleteReasonCode	Integer, 0 - 255	Optional (0-1)	This parameter allows the user to set a reason to why an account and/or subscriber is deleted. Zero reserved for Service expired, as defined by the life cycle of the account
barring	Boolean, { 0,1 } 0 (false) = No barring 1 (true) = Barring (default)	Optional (0-1)	Indicate whether barring in HLR is to be performed prior to deletion.
negotiatedCapabilities	Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.

5.2 Response Data

5.2.1 Parameters

MOId

Table 18 Delete Subscription Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 19 covers the parameters that can be used in a deleteSubscription response.

Table 19 Delete Subscription Parameters
Parameter					Type	Occurrence	Description
subscriberNumber					String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID					String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originOperatorID					String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example.
currency1					String, Currency	Optional (0-1)	The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
currency2					String, Currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
balanceCleared1					String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	This parameter contain amount cleared for the subscriber's main account when deleted. It indicates that the balance is in the first currency.
balanceCleared2					String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	This parameter contain amount cleared for the subscriber's main account when deleted. It indicates that the balance is in the first currency.
communityInformationCurrent					String	Optional (0-1)	The community the subscriber currently belongs to.
accountGroupID					Integer, 0 – 2147483647	Optional (0-1)	The Account Group identity for the account. 0 indicate clearing of account group (when set to 0 the account does not belong to any account group).
serviceOfferings					Sub-MO	Optional (0-n)	The values of the service offerings defined on an account. It has to be matched to the definitions of the tariff tree.
	serviceOfferingID				Integer, 1 - 31	Mandatory	The identity of a current service offering defined on an account.
	serviceOfferingActiveFlag				Boolean { 0, 1 } 0 (false) = The service offering is not active. 1 (true) = The service offering is active.	Mandatory	Whether a specific service offering pointed out by the serviceOfferingID parameter is active or not.
serviceClassCurrent					Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
languageIDCurrent					Integer, 1 - 4 1 = Operator specific language 1 2 = Operator specific language 2 3 = Operator specific language 3 4 = Operator specific language 4	Optional (0-1)	The preferred language of subscriber.
ussdEndOfCallNotificationID					Integer, 0 - 255 0–199 = As defined in the tariff trees 200–254 = Reserved 255 = No ID assigned (clears previously assigned ID)	Optional (0-1)	This parameter identifies which decision tree to use, when selecting the appropriate USSD text string for the End of Call Notification message to the subscriber.
serviceFeeExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of the service fee period.
supervisionExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of the supervision period.
creditClearancePeriod					Integer, 0 - 1023	Optional (0-1)	The period until credit clearance.
serviceRemovalPeriod					Integer, 0 - 1023	Optional (0-1)	The period until service removal.
refillUnbarDateTime					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time when a refill barred subscriber is unbarred and is allowed to do a new refill.
accountFlags					Sub-MO	Optional (0-1)	The life cycle state flags of the account, indicating the actual status of the account.
	activationStatusFlag				Boolean { 0, 1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
	negativeBarringStatusFlag				Boolean { 0, 1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
	supervisionPeriodWarningActiveFlag				Boolean { 0, 1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
	serviceFeePeriodWarningActiveFlag				Boolean { 0, 1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
	supervisionPeriodExpiryFlag				Boolean { 0, 1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
	serviceFeePeriodExpiryFlag				Boolean { 0, 1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate if the service fee period date has expired or not.
serviceClassOriginal					Integer, 0 - 9999	Optional (0-1)	The identity of the original service class when a temporary service class is active for an account. In case serviceClassOriginal is returned then the serviceClassCurrent will contain the temporary service class currently active for the account. When a temporary service class is active and a Return Service Class ID is specified, the serviceClassOriginal parameter will contain the identity of the return service class instead of the original service class. The account will then return to the specified Return Service Class ID when the temporary service class expires.
serviceClassTemporaryExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00		The expiry date of a temporary service class of an account. A temporary service class has precedence before the normally assigned service class, as long as the temporary service class date expiry date is not passed.
activationDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The activation date of an account. Subordinate subscribers will contain the activation date of the master account. Element Value Range: DateMin to DateToday
promotionPlanID					String, 1 - 4	Optional (0-1)	The identity of one of the current promotion plans of a subscriber.
promotionStartDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Start date of the associated promotion plan.
promotionEndDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	End date of the associated promotion plan.
promotionRefillCounter					Integer, 0 - 255	Optional (0-1)	The accumulated number of account refills within the current promotion plan of a subscriber.
promotionRefillAccumulatedValue1					String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of account refills made within the current promotion plan of a subscriber. It indicates the value in the first currency.
promotionRefillAccumulatedValue2					String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of account refills made within the current promotion plan of a subscriber. It indicates the value in the second currency.
progressionRefillValue1					String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of refills for promotion plan progression. It indicates the value in the first currency.
progressionRefillValue2					String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of refills for promotion plan progression. It indicates the value in the second currency.
progressionRefillCounter					Integer, 0 - 255	Optional (0-1)	The value of the accumulated number of refills for promotion plan progression.
dedicatedAccountDeleteInformation					Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
	dedicatedAccountID				Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
	productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	dedicatedAccountValue1				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
	dedicatedAccountValue2				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
	expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
	startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
	pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	offerID				Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
	subDedicatedAccountInformation				Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
		dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
		dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
		expiryDate			Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
		startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
	dedicatedAccountUnitType				Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
offerInformation					Sub-MO	Optional (0-n)	Dates (or dates and time) for offers.
	offerID				Integer, 0 - 2147483647	Optional (0-1)	The identity of an offer.
	startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
	expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account, Value Range: DateMin to DateMax or DateInfinite
	startDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Value Range: DateMin to DateMax or DateBeginningOfTime
	expiryDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Value Range: DateMin to DateMax or DateInfinite
	pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	offerType				Integer, 0 - 7	Optional (0-1)	The identifies the offer type.
	offerState				Integer, 0 - 99 0 = Enabled offer state 1 = Disabled offer state 2-99 = Reserved for future use	Optional (0-1)	Specifies the actual offer state to return in a GetOfferrequest.
	offerProviderID				String, 1 - 28 digits	Optional (0-1)	The subscriber number as represented in the SDP database for the provider.
	productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	usageCounterUsageThresholdInformation				Sub-MO	Optional (0-n)	All active usage counters with their thresholds for a subscriber.
		usageCounterID			Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
		usageCounterValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter.
		usageCounterNominalValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter, without any factor.
		usageCounterMonetaryValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the first currency.
		usageCounterMonetaryNominalValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the first currency.
		usageCounterMonetaryValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the second currency.
		usageCounterMonetaryNominalValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the second currency.
		usageThresholdInformation			Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
			usageThresholdID		Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
			usageThresholdValue		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
			usageThresholdMonetaryValue1		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
			usageThresholdMonetaryValue2		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
			usageThresholdSource		Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
			associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		associatedPartyID			String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	dedicatedAccountChangeInformation				Sub-MO	Optional (0-n)	Information of changes done to balances and dates for dedicated accounts.
		dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
		dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
		expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
		closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
		closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
		closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		subDedicatedAccountChangeInformation			Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
			changedAmount1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the first currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
			changedAmount2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the second currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
			dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
			dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
			changedExpiryDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
			newExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new expiry date for a dedicated account.
			clearedExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous expiry date for a cleared dedicated account. DateMin to DateMax or DateInfinite
			changedStartDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the start date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
			newStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new start date for a dedicated account. DateMin to DateMax or DateBeginningOfTime
			clearedStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous start date for a cleared dedicated account. DateMin to DateMax or DateBeginningOfTime
		dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
	dedicatedAccountInformation				Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
		dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
		productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
		closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
		closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		subDedicatedAccountInformation			Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
			dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		compositeDedicatedAccountFlag			Boolean { 1 }	Optional (0-1)	This flag indicates that a dedicated account is a composite dedicated account. It is used to identify a composite dedicated account that does not have any sub dedicated accounts.
	attributeInformation				Sub-MO	Mandatory	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
		attributeName			String, 1 - 128 characters	Optional (0-1)	The name of the attribute.
		attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
		attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
		attributeValueDecimal			Sub-MO	Optional (0-1)	Information about a decimal value.
			attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
		attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute.
		attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contain the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
	treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
		serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
		treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about a treeParameter.
			treeParameterName		String, 1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
			treeParameterValueString		String, 1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
			treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
			treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals that are used.
				treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	Contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
				numberOfDecimals	Integer, 0 - 15	Mandatory	Contains information about where to put the decimal sign counted in positions from the right and forms together with attributeValueNumber a decimal number.
			treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter.
			treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
				scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
				scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
				scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
				scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
				scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
				scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
				scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
				scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
			treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
			treeParameterValueDateRange		Sub-MO	Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
				treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
				treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
			treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
			treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
			associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
	productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
accountHomeRegion					Integer, 0 - 999	Optional (0-1)	The home region for the account. Zero means no home region set.
periodicAccountManagementData					Sub-MO	Optional (0-n)	Information used for periodic account management.
	pamServiceID				Integer, 0 - 99	Mandatory	The id of the periodic account management service.
	pamClassID				Integer, 0 - 9999	Mandatory	The periodic account management class used by the periodic account management service.
	scheduleID				Integer, 0 - 9999	Mandatory	The schedule that is used by the periodic account management service.
	currentPamPeriod				String, 1 - 30 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Mandatory	The periodic account management period that is currently used for the subscriber.
	deferredToDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The deferred to date for the Periodic Account Management service.
	lastEvaluationDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date of the last periodic account management evaluation.
	pamServicePriority				Integer, 0 - 65535	Optional (0-1)	Indicate the priority between PAM services at PAM evaluation. Lower value gives higher priority.
usageCounterDeleteInformation					Sub-MO	Optional (0-n)	All active usage counters with their thresholds for a subscriber.
	usageCounterID				Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
	usageCounterValue				String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter.
	usageCounterMonetaryValue1				String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the first currency.
	usageCounterMonetaryValue2				String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage threshold amount in the second currency.
	usageThresholdInformation				Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
		usageThresholdID			Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
		usageThresholdValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
		usageThresholdMonetaryValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
		usageThresholdMonetaryValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
		usageThresholdSource			Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
		associatedPartyID			String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
	associatedPartyID				String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
	productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
negotiatedCapabilities					Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities					Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

5.3 Examples

5.3.1 Example of Deleting a Master Subscriber

This section gives an example of the deleteSubscription request and response message. This example shows how to delete a Master Subscriber.

Request Example

Example 70 Delete Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>7b505785ba4945c6930c99988401d06f</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Delete>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000005</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:deleteSubscription subscriberNumber="465273152000001">
            <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
            </air:deleteSubscription>
         </cai3:MOAttributes>
      </cai3:Delete>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 71 Delete Subscription Response Message

message.
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>7b505785ba4945c6930c99988401d06f</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <DeleteResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOId>
            <air:subscriberNumber xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">465273152000005</air:subscriberNumber>
         </MOId>
         <MOAttributes>
            <air:deleteSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>1441178898568250340</air:originTransactionID>
               <air:originOperatorID>operator</air:originOperatorID>
               <air:currency1>SEK</air:currency1>
               <air:balanceCleared1>0</air:balanceCleared1>
               <air:accountGroupID>0</air:accountGroupID>
               <air:serviceClassCurrent>22</air:serviceClassCurrent>
               <air:languageIDCurrent>1</air:languageIDCurrent>
               <air:ussdEndOfCallNotificationID>255</air:ussdEndOfCallNotificationID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:deleteSubscriptionResponse>
         </MOAttributes>
      </DeleteResponse>
   </S:Body>
</S:Envelope>

5.3.2 Example of Deleting a Subordinate Subscriber

This section gives an example of the deleteSubscription request and response message. This example shows how to delete a Subordinate Subscriber.

Request Example

Example 72 Delete Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>7b505785ba4945c6930c99988401d06f</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Delete>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000006</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:deleteSubscription subscriberNumber="465273152000006">
            <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
            </air:deleteSubscription>
         </cai3:MOAttributes>
      </cai3:Delete>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 73 Delete Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>7b505785ba4945c6930c99988401d06f</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <DeleteResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOId>
            <air:subscriberNumber xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">465273152000006</air:subscriberNumber>
         </MOId>
         <MOAttributes>
            <air:deleteSubscriptionResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000006</air:subscriberNumber>
               <air:originTransactionID>1441178895393568592</air:originTransactionID>
               <air:originOperatorID>operator</air:originOperatorID>
               <air:languageIDCurrent>1</air:languageIDCurrent>
               <air:ussdEndOfCallNotificationID>255</air:ussdEndOfCallNotificationID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>536879616</air:availableServerCapabilities>
            </air:deleteSubscriptionResponse>
         </MOAttributes>
      </DeleteResponse>
   </S:Body>
</S:Envelope>

6 Get AIR Offer

This section covers the AIR subscriber command getOffer.

MOType

Offer@http://schemas.ericsson.com/ma/CS/AIR/

6.1 Request Data

6.1.1 Parameters

MOId

Table 20 Get Offer Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 21 covers the parameters that can be used in a getOffer request.

Table 21 Get Offer Parameters
Parameter		Type	Occurrence	Description
originNodeType		String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName		String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
originTimeStamp		String: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation.
subscriberNumberNAI		Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
offerSelection		Sub-MO	Optional (0-n)	Used to define offer identifiers to retrieve.
	offerIDFirst	Integer, 1 - 2147483647	Mandatory	The identity of the first offer in a sequence of offers, or the only offer identity if a single offer shall be obtained.
	offerIDLast	Integer, 1 - 2147483647	Optional (0-1)	The identity of the last offer in a sequence of offers, or the only offer identity if a single offer shall be obtained.
productSelection		Sub-MO	Optional (0-n)	Used to define product identifiers to retrieve for a given offer.
	offerID	Integer, 1 - 2147483647	Mandatory	The identity of an offer.
	productID	Integer, 0 - 2147483647	Optional	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
requestInactiveOffersFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not contain the inactive (or disabled) offers for the subscriber. Only active offers will be returned. 1 (true) = The response will contain all offers for the subscriber (including expired offers within their removal protection period).	Optional (0-1)	Indicate the state of the offers that should be included in a response.
offerRequestedTypeFlag		String, 8 digits Example string: For '10xxxxxx' digit 1 is set and for '01xxxxxx' digit 2 is set. Index 1: Account 0 = Do not return Account offers 1 = Return Account offers Index 2: Multi User Identification 0 = Do not return Multi User Identification offers 1 = Return Multi User Identification offers Index 3: Timer 0 = Do not return high resolution offers for Timer charging 1 = Return high resolution offers for Timer charging Index 4: Provider Account 0 = Do not return Provider Account offers 1 = Return Provider Account offers Index 4: Shared Account 0 = Do not return Shared Account offers 1 = Return Shared Account offers Index 6-8: For future use	Optional (0-1)	The type or types of offers to return in a GetOffers request. If omitted, only Account offers are returned.
requestDedicatedAccountDetailsFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not include the dedicatedAccountInformation structs which are associated with the offer. 1 (true) = The response will include the dedicatedAccountInformation structs which are associated with the offer.	Optional (0-1)	Indicate the requested detail level of the content in the dedicatedAccountInformation.
requestSubDedicatedAccountDetailsFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not include the associated subDedicatedAccountInformation structs. 1 (true) = The response will include the associated subDedicatedAccountInformation structs.	Optional (0-1)	Indicate the requested detail level of the content in the dedicatedAccountInformation.
requestFirstAccessibleAndExpiredBalanceAndDateFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not include the associated closestExpiryDate, closestExpiryValue1, closestExpi ryValue2, closestAccessibleDate, closestAccessibleValue1,closestAcc essibleValue2. 1 (true) = The response will include the associated closestExpiryDate, closestExpiryValue1, closestExpi ryValue2, closestAccessibleDate, closestAccessibleValue1,closestAcc essibleValue2.	Optional (0-1)	Indicate the requested detail level of the content in the dedicatedAccountInformation.
requestUsageCountersAndThresholdsFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not include the associated offerInformation structs. 1 (true) = The response will include the associated offerInformation structs.	Optional (0-1)	Indicate the requested detail level of the content in the offerInformation.
requestTreeParameterSetsFlag		Boolean { 0, 1 } 0 (false) (default value): The response will not contain tree parameter sets. 1 (true): The response will contain tree parameter sets, if existing.	Optional (0-1)	Indicates if the tree parameter sets for all types of trees stored for the offer are to be included in a response.
productOfferingName		String, 1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
requestAttributesFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not contain attributes. 1 (true) The response will contain attributes, if existing.	Optional (0-1)	Indicate whether the attribute stored for the offer is to be included in a response.
negotiatedCapabilities		Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same as the numbering format used by the account database, which also includes support of leading zeroes.
requestOfferResourcesFlag		Boolean { 0, 1 } 0 (false) (default value) = Do not return. 1 (true) = return	Optional (0-1)	The parameter is used to request whether offer resources (DAs and UCs with their UTs) for both non-product-private and product-private resources for an offer is to be returned or not.

6.2 Response Data

6.2.1 Parameters

MOId

Table 22 Get Offer Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 23 covers the parameters that can be used in a getOffer response.

Table 23 Get Offer Response
Parameter					Type	Occurrence	Description
subscriberNumber					String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID					String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
offerInformation					Sub-MO	Optional (0-n)	Dates (or dates and time) for offers.
	offerID				Integer, 0 - 2147483647	Mandatory	The identity of an offer.
	startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
	expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account, Value Range: DateMin to DateMax or DateInfinite
	startDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Value Range: DateMin to DateMax or DateBeginningOfTime
	expiryDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Value Range: DateMin to DateMax or DateInfinite
	pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	offerType				Integer, 0 - 7	Optional (0-1)	The identifies the offer type.
	offerState				Integer, 0 - 99 0 = Enabled offer state 1 = Disabled offer state 2-99 = Reserved for future use	Optional (0-1)	Specifies the actual offer state to return in a GetOfferrequest.
	offerProviderID				String, 1 - 28 digits	Optional (0-1)	The subscriber number as represented in the SDP database for the provider.
	productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	usageCounterUsageThresholdInformation				Sub-MO	Optional (0-n)	All active usage counters with their thresholds for a subscriber.
		usageCounterID			Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
		usageCounterValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter.
		usageCounterNominalValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter, without any factor.
		usageCounterMonetaryValue1			String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the first currency.
		usageCounterMonetaryNominalValue1			String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the first currency.
		usageCounterMonetaryValue2			String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the second currency.
		usageCounterMonetaryNominalValue2			String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the second currency.
		usageThresholdInformation			Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
			usageThresholdID		Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
			usageThresholdValue		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
			usageThresholdMonetaryValue1		String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
			usageThresholdMonetaryValue2		String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
			usageThresholdSource		Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
			associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		associatedPartyID			String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		usageCounterResourceConnected			Boolean {1} 1 (true): The usage counter is a non-product-private connected resource	Optional (0-1)	Indicates if the usage counter is a non-product-private connected resource.
	dedicatedAccountChangeInformation				Sub-MO	Optional (0-n)	Contain information of changes done to balances and dates for dedicated accounts.
		dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
		dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
		startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
		closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
		closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
		closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		subDedicatedAccountChangeInformation			Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
			changedAmount1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the first currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
			changedAmount2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the second currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
			dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
			dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
			changedExpiryDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
			newExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new expiry date for a dedicated account.
			clearedExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous expiry date for a cleared dedicated account. DateMin to DateMax or DateInfinite
			changedStartDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the start date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
			newStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new start date for a dedicated account. DateMin to DateMax or DateBeginningOfTime
			clearedStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous start date for a cleared dedicated account. DateMin to DateMax or DateBeginningOfTime
		dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		dedicatedAccountResourceConnected			Boolean {1} 1 (true): The dedicated account is a non-product-private connected resource	Optional (0-1)	Indicates if the dedicated account is a non-product-private connected resource.
	dedicatedAccountInformation				Sub-MO	Optional (0-n)	Contain balances and dates for dedicated accounts.
		dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
		productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
		closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
		closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		subDedicatedAccountInformation			Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
			dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		compositeDedicatedAccountFlag			Boolean { 1 }	Optional (0-1)	Indicate that a dedicated account is a composite dedicated account. It is used to identify a composite dedicated account that does not have any sub dedicated accounts
		dedicatedAccountResourceConnected			Boolean {1} 1 (true): The dedicated account is a non-product-private connected resource	Optional (0-1)	Indicates if the dedicated account is a non-product-private connected resource.
	attributeInformation				Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
		attributeName			String, 1 - 128 characters	Mandatory	The name of the attribute.
		attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
		attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
		attributeValueDecimal				Optional (0-1)	Information about a decimal value.
			attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
		attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute.
		attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contains the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
	treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
		serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
		treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about a treeParameter.
			treeParameterName		String, 1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
			treeParameterValueString		String, 1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
			treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
			treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals that are used.
				treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	Contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
				numberOfDecimals	Integer, 0 - 15	Mandatory	Contains information about where to put the decimal sign counted in positions from the right and forms together with attributeValueNumber a decimal number.
			treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter.
			treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
				scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
				scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
				scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
				scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
				scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
				scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
				scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
				scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
			treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-n)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
			treeParameterValueDateRange			Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
				treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
				treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
			treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
			treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
			associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
	productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
currency1					String, Currency	Optional (0-1)	The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
currency2					String, Currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
negotiatedCapabilities					Interger: array of <int> or <i4> 0 - 2147483647	Optional (0-n)	Indicates the negotiated capabilities between the client and server node. The capabilities are presented as a series of elements, where each element contains an integer value between 0 and 2147483647. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities					Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.
treeParameterInformation					Sub-MO	Optional (0-n)	Contains information about a treeParameter.
	treeParameterName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
	treeParameterValueString				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
	treeParameterValueDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
	treeParameterValueDecimal				Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
		treeParameterValueNumber			String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
		numberOfDecimals			Integer, 0 - 15	Mandatory	The parameter contains information about where to put the decimal sign counted in positions from the right.
	treeParameterValueInteger				String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
	treeParameterValueSchedule					Optional (0-1)	Contains values for a schedule event.
		scheduledFrequency			Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
		scheduledInterval			Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
		scheduledMonth			Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
		scheduledDayOfMonth			Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
		scheduledDayOfWeek			Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
		scheduledHour			Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
		scheduledMinute			Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
		scheduledSecond			Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
	treeParameterValueDayOfWeek				Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
	treeParameterValueDateRange					Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
		treeParameterStartDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
		treeParameterEndDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
	treeParameterValueTime				String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
	treeParameterSource				Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
	associatedPartyID				String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.

6.3 Examples

This section gives an example of the getOffer request and response message. This example shows how to get an AIR offer.

Request Example

Example 74 Get Offer Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>481651e281824a4681d7184320e75986</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Offer@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000009</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getOffer subscriberNumber="465273152000009">
               <air:offerSelection>
                  <air:offerIDFirst>101</air:offerIDFirst>
                  
                  <air:offerIDLast>103</air:offerIDLast>
               </air:offerSelection>
 		  </air:getOffer>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 75 Get Offer Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>481651e281824a4681d7184320e75986</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:getOfferResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000009</air:subscriberNumber>
               <air:originTransactionID>14465353343564436411</air:originTransactionID>
               <air:offerInformation>
                  <air:offerID>101</air:offerID>
                  <air:startDate>2015-10-08T12:00:00+00:00</air:startDate>
                  <air:expiryDate>2017-10-08T12:00:00+00:00</air:expiryDate>
               </air:offerInformation>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>805646916</air:availableServerCapabilities>
            </air:getOfferResponse>
         </MOAttributes>
      </GetResponse>
   </S:Body>
</S:Envelope>

7 Set AIR Offer

This section covers the command setOffer .

MOType

Offer@http://schemas.ericsson.com/ma/CS/AIR/

7.1 Request Data

7.1.1 Parameters

MOId

Table 24 Set Offer MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
offerID	Integer, 0 - 2147483647	Mandatory	The identity of an offer.

MOAttributes

Table 25 covers the parameters that can be used in a setOffer request.

Table 25 Set Offer Parameters
Parameter				Type	Occurrence	Description
originNodeType				String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName				String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID				String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill. If this parameter is absent from the request, Dynamic Activation will generate System time milliseconds plus seven ramdon digital numbers as the parameter to NEs.
originTimeStamp				String: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation. If this parameter is absent from the request, Dynamic Activation will generate PGN system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic.
subscriberNumberNAI				Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
transactionCurrency				String, currency	Optional (0-1)	The ID to point out what currency is used for the transaction. For example, SEK, EUR, USD, etc.
originOperatorID				String, 1- 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It can be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate the default "operator" or the configured `OriginOperatorId` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic configure.
offerRequestInformation				Sub-MO	Optional (0-1)	Information about an offer request
	dateInformation			Sub-MO	Optional (0-1)	The date information of a request
		startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime.
		startDateRelative		Integer, -999 to -1 and 1 to 999	Optional (0-1)	This parameter is used to make a relative adjustment to the current start date. The adjustment can be positive or negative. It is expressed in number of days.
		startPamPeriod		Sub-MO	Mandatory	The Periodic Account Management period
			startPamPeriodIndicator	Integer, 0 - 99	Mandatory	The Periodic Account Management period when the offer and DA becomes valid. If the offer has the capability of date and time the time stamp will default to 00:00:00. Update of the PAM period indicator on an existing offer will keep the current time stamp unchanged. Time stamp can however be changed by including currentTimeOffset. Zero means that the start date of an offer or a DA is the current date.
			currentTimeOffset	Boolean {0 ,1} 0 (false) = Time stamp will not be set (default value apply if applicable). 1 (true) = Time stamp will be set to current system time.	Optional (0-1)	Indicates whether the default time or current time should be used in time stamp.
		expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		expiryDateRelative		Integer, -999 to -1 and 1 to 999	Optional (0-1)	This parameter is used to make a relative adjustment to an expiry date. The adjustment can be positive or negative. It is expressed in number of days.
		expiryPamPeriodIndicator		Integer, 1- 100 and 2147483647 2147483647 = no expiry.	Optional (0-1)	the Periodic Account Management period when the offer or DA becomes invalid. When the offer has the capability of storing date and time the time stamp will be set to 00:00:00 or 23:59:59 depending on system configuration.
	dateTimeInformation			Sub-MO	Optional (0-1)	The date and time information
		startDateTime		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		startDateTimeRelative		Integer, -99 999 999 to 99 999 999	Optional (0-1)	This parameter is used to make a relative adjustment to the current start date and time for an offer. The adjustment can be positive or negative. It is expressed in number of seconds. The parameter may also be used to define start date and time for other entities depending on the context where it is used.
		expiryDateTime		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Element Value Range: DateMin to DateMax or DateInfinite
		expiryDateTimeRelative		Integer, -99 999 999 to 99 999 999	Optional (0-1)	This parameter is used to make a relative adjustment to the current expiry date and time. The adjustment can be positive or negative. It is expressed in number of seconds. The parameter may also be used to define expiry date and time for other entities depending on the context where it is used.
	pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	offerType			Integer, 0 - 7	Optional (0-1)	The identifies the offer type.
	offerProviderID			String, 1 - 28 digits	Optional (0-1)	The subscriber number as represented in the SDP database for the provider.
	dedicatedAccountUpdateInformation			Sub-MO	Optional (0-n)	Information for updating balances and expiry date for dedicated accounts.
		dedicatedAccountID		Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		productID		Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		dedicatedAccountPamPeriodInformation		Sub-MO	Optional (0-1)
			productID	Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
			adjustmentAmountRelative	String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 Unit	Optional (0-1)	The amount of the adjustment (positive or negative) to be applied to the account.
			dedicatedAccountValueNew	String, 0 - 999 999 999 999 Unit	Optional (0-1)	Value to assign to a dedicated account. This is not taking in consideration any ongoing chargeable events.
			adjustmentDateRelative	Integer, -32767 to -1 and 1 to 32767	Optional (0-1)	This parameter is used to make a relative adjustment to the current expiry date. The adjustment can be positive or negative. It is expressed in number of days.
			expiryDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			expiryPamPeriodIndicator	Integer, 1- 100 and 2147483647 2147483647 = no expiry.	Optional (0-1)	the Periodic Account Management period when the offer or DA becomes invalid. When the offer has the capability of storing date and time the time stamp will be set to 00:00:00 or 23:59:59 depending on system configuration.
			startDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime.
			adjustmentStartDateRelative	Integer, -999 to -1 and 1 to 999	Optional (0-1)	This parameter is used to make a relative adjustment to the current start date. The adjustment can be positive or negative. It is expressed in number of days.
			startPamPeriodIndicator	Integer, 0 - 99	Optional (0-1)	The startPamPeriodIndicator parameter indicates the Periodic Account Management period when the offer and DA becomes valid. If the offer has the capability of date and time the time stamp will default to 00:00:00. Update of the PAM period indicator on an existing offer will keep the current time stamp unchanged. Time stamp can however be changed by including currentTimeOffset. Zero means that the start date of an offer or a DA is the current date.
			dedicatedAccountUnitType	Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
			expiryDateCurrent	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The current expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			startDateCurrent	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The current start date for a dedicated account. Used for validation. No validation is performed if omitted. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			pamServiceID	Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		updateAction		String Enumeration value="EXPIRE"	Optional (0-1)	Indicate which action to take on the resource. EXPIRE = Expire the resource immediately.
	attributeUpdateInformation			Sub-MO	Optional (0-n)	Update information of the attribute
		attributeName		String, 1 - 128 characters	Mandatory	The name of the attribute.
		attributeUpdateAction		String Enumeration value="ADD" Enumeration value="DELETE" Enumeration value="CLEAR" Enumeration value="SET"	Mandatory	The requested action for an attribute. ADD : Add an entry to the set (for attributes storing a set of values). DELETE : Delete an entry from the set (for attributes storing a set of values). CLEAR :Clear all entries from the set (for attributes storing a set of values) or removes the value for a single value attribute. SET :Sets the value for a single value attribute. Previous value, if existing, will be overwritten.
		attributeValueString		String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
		attributeValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
		attributeValueDecimal		Sub-MO	Optional (0-1)	Information about a decimal value.
			attributeValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals	Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
		attributeValueInteger		Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute.
updateAction				String Enumeration value="EXPIRE"	Mandatory	Indicate which action to take on the resource. EXPIRE = Expire the resource immediately.
treeParameterSetUpdateInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names.
	serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
	treeParameterUpdateInformation			Sub-MO	Optional (0-n)	Contains information about the changes made to a treeParameter.
		treeParameterName		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Mandatory	Contains the name of the tree parameter.
		treeParameterUpdateAction		String Enumeration value="ADD" Enumeration value="DELETE" Enumeration value="CLEAR" Enumeration value="SET"	Mandatory	Contains the requested action for a tree parameter. ADD: Adds an entry to the set (for tree parameters storing a set of values). DELETE: Deletes an entry from the set (for tree parameters storing a set of values). CLEAR: Clears all entries from the set (for tree parameters storing a set of values) or removes the value for a single value tree parameter. SET: Sets the value for a single value tree parameter. Previous value, if existing, will be overwritten.
		treeParameterValueString		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
		treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
		treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
			attributeValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals	Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
		treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
		treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
		treeParameterValueDateRange		Sub-MO	Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
			treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
			treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
		treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
		treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
			scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
			scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
			scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
			scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
			scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
			scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
			scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
			scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
		associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
negotiatedCapabilities				Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.

7.2 Response Data

7.2.1 Parameters

MOId

Table 26 Set Offer MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 27 covers the parameters that can be used in a setOffer response.

Table 27 Set Offer Response
Parameter				Type	Occurrence	Description
subscriberNumber				String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID				String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originOperatorID				String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example.
currency1				String, Currency	Optional (0-1)	The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
currency2				String, Currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
offerID				Integer, 0 - 2147483647	Mandatory	The identity of an offer.
startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account, Value Range: DateMin to DateMax or DateInfinite
startDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Value Range: DateMin to DateMax or DateBeginningOfTime
expiryDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Value Range: DateMin to DateMax or DateInfinite
pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
offerType				Integer, 0 - 7	Optional (0-1)	The identifies the offer type.
offerState				Integer, 0 - 99 0 = Enabled offer state 1 = Disabled offer state 2-99 = Reserved for future use	Optional (0-1)	Specifies the actual offer state to return in a GetOfferrequest.
offerProviderID				String, 1 - 28 digits	Optional (0-1)	The subscriber number as represented in the SDP database for the provider.
productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
dedicatedAccountChangeInformation				Sub-MO	Optional (0-n)	Information of changes done to balances and dates for dedicated accounts.
	dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
	productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
	dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
	startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
	expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
	pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
	closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
	closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
	closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
	closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
	closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
	closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
	dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
	dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
	subDedicatedAccountChangeInformation			Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
		changedAmount1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the first currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
		changedAmount2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the second currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
		dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
		dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
		changedExpiryDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
		newExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new expiry date for a dedicated account.
		clearedExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous expiry date for a cleared dedicated account. DateMin to DateMax or DateInfinite
		changedStartDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the start date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
		newStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new start date for a dedicated account. DateMin to DateMax or DateBeginningOfTime
		clearedStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous start date for a cleared dedicated account. DateMin to DateMax or DateBeginningOfTime
	dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
	dedicatedAccountResourceConnected			Boolean {1} 1 (true): The dedicated account is a non-product-private connected resource	Optional (0-1)	Indicates if the dedicated account is a non-product-private connected resource.
attributeInformation				Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
	attributeName			String, 1 - 128 characters	Mandatory	The name of the attribute.
	attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
	attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
	attributeValueDecimal			Sub-MO	Optional (0-1)	Information about a decimal value.
		attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
		numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
	attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute.
	attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contain the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
	serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
	treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about a treeParameter.
		treeParameterName		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
		treeParameterValueString		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
		treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
		treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
			treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals	Integer, 0 - 15	Mandatory	The parameter contains information about where to put the decimal sign counted in positions from the right.
		treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
		treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
			scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
			scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
			scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
			scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
			scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
			scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
			scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
			scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
		treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
		treeParameterValueDateRange		Sub-MO	Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
			treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
			treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
		treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
		treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
		associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
negotiatedCapabilities				Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities				Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

7.3 Examples

This section gives an example of the setOffer request and response message. This example shows how to set an AIR offer.

Request Example

Example 76 Set Offer Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>5b96b03b62c9445fac3862d4632aabeb</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Offer@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
            <air:offerID>102</air:offerID>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setOffer subscriberNumber="465273152000001" offerID="102">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:transactionCurrency>SEK</air:transactionCurrency>
               <air:offerRequestInformation>
                  <air:offerProviderID>465273152000001</air:offerProviderID>
               </air:offerRequestInformation>
               <air:negotiatedCapabilities>64</air:negotiatedCapabilities>
            </air:setOffer>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 77 Set Offer Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>5b96b03b62c9445fac3862d4632aabeb</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setOfferResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>14430814093956082332</air:originTransactionID>
               <air:offerID>102</air:offerID>
               <air:startDateTime>2015-09-24T09:56:49+02:00</air:startDateTime>
               <air:offerType>3</air:offerType>
               <air:offerProviderID>465273152000001</air:offerProviderID>
               <air:negotiatedCapabilities>64</air:negotiatedCapabilities>
               <air:availableServerCapabilities>805646916</air:availableServerCapabilities>
            </air:setOfferResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

8 Delete AIR Offer

This section covers the AIR command deleteOffer.

MOType

Offer@http://schemas.ericsson.com/ma/CS/AIR/

8.1 Request Data

8.1.1 Parameters

MOId

Table 28 Delete Offer MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by `subscriberNumberNAI` parameter.
offerID	Integer, 1 - 2147483647	Mandatory	The identity of an offer.

MOAttributes

Table 29 covers the parameters that can be used in a deleteOffer request.

Table 29 Delete Offer Parameters
Parameter	Type	Occurrence	Description
originNodeType	String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName	String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID	String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in the originTransactionID parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill. If this parameter is absent from the request, Dynamic Activation will generate System time milliseconds plus seven ramdon digital numbers as the parameter to NEs.
originTimeStamp	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation. If this parameter is absent from the request, Dynamic Activation will generate PGN system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic
subscriberNumberNAI	Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
originOperatorID	String, 1- 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It can be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate the default "operator" or the configured `OriginOperatorId` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic configure.
productID	Integer, 1 - 2147483647	Optional (0-1)	The identity of a product.
negotiatedCapabilities	Interger: array of <int> or <i4> 0 - 2147483647	Optional (0-n)	Indicates the negotiated capabilities between the client and server node. The capabilities are presented as a series of elements, where each element contains an integer value between 0 and 2147483647. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.

8.2 Response Data

8.2.1 Parameters

MOId

Table 30 Delete Offer Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by `subscriberNumberNAI` parameter.

MOAttributes

Table 31 covers the parameters that can be used in a deleteOffer response.

Table 31 Delete Offer Response
Parameter					Type	Occurrence	Description
subscriberNumber					String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID					String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originOperatorID					String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example.
offerID					Integer, 0 - 2147483647	Mandatory	The identity of an offer.
startDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
expiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account, Value Range: DateMin to DateMax or DateInfinite
startDateTime					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Value Range: DateMin to DateMax or DateBeginningOfTime
expiryDateTime					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Value Range: DateMin to DateMax or DateInfinite
offerInformation					Sub-MO	Optional (0-n)	Dates (or dates and time) for offers.
	offerID				Integer, 0 - 2147483647	Mandatory	The identity of an offer.
	startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
	expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account, Value Range: DateMin to DateMax or DateInfinite
	startDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Value Range: DateMin to DateMax or DateBeginningOfTime
	expiryDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Value Range: DateMin to DateMax or DateInfinite
	pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
	offerType				Integer, 0 - 7	Optional (0-1)	The identifies the offer type.
	offerState				Integer, 0 - 99 0 = Enabled offer state 1 = Disabled offer state 2-99 = Reserved for future use	Optional (0-1)	Specifies the actual offer state to return in a GetOfferrequest.
	offerProviderID				String, 1 - 28 digits	Optional (0-1)	The subscriber number as represented in the SDP database for the provider.
	productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	usageCounterUsageThresholdInformation				Sub-MO	Optional (0-n)	All active usage counters with their thresholds for a subscriber.
		usageCounterID			Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
		usageCounterValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter.
		usageCounterNominalValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter, without any factor.
		usageCounterMonetaryValue1			String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the first currency.
		usageCounterMonetaryNominalValue1			String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the first currency.
		usageCounterMonetaryValue2			String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the second currency.
		usageCounterMonetaryNominalValue2			String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the second currency.
		usageThresholdInformation			Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
			usageThresholdID		Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
			usageThresholdValue		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
			usageThresholdMonetaryValue1		String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
			usageThresholdMonetaryValue2		String, 0 - 999 999 999 999	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
			usageThresholdSource		Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
			associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		associatedPartyID			String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		usageCounterResourceConnected			Boolean {1} 1 (true): The usage counter is a non-product-private connected resource	Optional (0-1)	Indicates if the usage counter is a non-product-private connected resource.
	dedicatedAccountChangeInformation				Sub-MO	Optional (0-n)	Contain information of changes done to balances and dates for dedicated accounts.
		dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
		dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
		startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
		closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
		closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
		closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		subDedicatedAccountChangeInformation			Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
			changedAmount1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the first currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
			changedAmount2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the second currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
			dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
			dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
			changedExpiryDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
			newExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new expiry date for a dedicated account.
			clearedExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous expiry date for a cleared dedicated account. DateMin to DateMax or DateInfinite
			changedStartDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the start date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
			newStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new start date for a dedicated account. DateMin to DateMax or DateBeginningOfTime
			clearedStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous start date for a cleared dedicated account. DateMin to DateMax or DateBeginningOfTime
		dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		dedicatedAccountResourceConnected			Boolean {1} 1 (true): The dedicated account is a non-product-private connected resource	Optional (0-1)	Indicates if the dedicated account is a non-product-private connected resource.
	dedicatedAccountInformation				Sub-MO	Optional (0-n)	Contain balances and dates for dedicated accounts.
		dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
		productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
		closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
		closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		subDedicatedAccountInformation			Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
			dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		compositeDedicatedAccountFlag			Boolean { 1 }	Optional (0-1)	Indicate that a dedicated account is a composite dedicated account. It is used to identify a composite dedicated account that does not have any sub dedicated accounts
		dedicatedAccountResourceConnected			Boolean {1} 1 (true): The dedicated account is a non-product-private connected resource	Optional (0-1)	Indicates if the dedicated account is a non-product-private connected resource.
	attributeInformation				Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
		attributeName			String, 1 - 128 characters	Mandatory	The name of the attribute.
		attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
		attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
		attributeValueDecimal			Sub-MO	Optional (0-n)	Information about a decimal value.
			attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
		attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute.
		attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contains the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
	treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
		serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
		treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about a treeParameter.
			treeParameterName		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
			treeParameterValueString		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
			treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
			treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
				treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
				numberOfDecimals	Integer, 0 - 15	Mandatory	The parameter contains information about where to put the decimal sign counted in positions from the right.
			treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
			treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
			treeParameterValueDateRange		Sub-MO	Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
				treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
				treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
			treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
			treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
				scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
				scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
				scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
				scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
				scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
				scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
				scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
				scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
			treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
			associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
	productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
pamServiceID					Integer, 0 - 99	Optional (0-1)	The identity of the periodic account management service.
currency1					String, Currency	Optional (0-1)	The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
currency2					String, Currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
dedicatedAccountDeleteInformation					Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
	dedicatedAccountID				Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
	productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
	dedicatedAccountValue1				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
	dedicatedAccountValue2				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
	expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
	startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
	pamServiceID				Integer, 0 - 99	Optional (0-1)	The identity of the periodic account management service.
	offerID				Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
	subDedicatedAccountInformation				Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
		dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
	dedicatedAccountUnitType				Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional
fafInformation					Sub-MO	Optional (0-n)	Information about family and friends function
	fafNumber				String, 1 - 30 digits	Mandatory	A Family and Friends number
	owner				String Enumeration value="Subscriber" Enumeration value="Account"	Mandatory	Indicate whether the data is attached to the account or subscriber.
	fafIndicator				Integer, 1 - 65535	Optional (0-1)	This parameter is used for differentiated rating for traffic events to and from numbers in the Family and Friends (FaF) number list.
offerType					Integer, 0 - 7	Optional (0-1)	The identifies the offer type.
offerState					Integer, 0 - 99 0 = Enabled offer state 1 = Disabled offer state 2-99 = Reserved for future use	Optional (0-1)	Specifies the actual offer state to return in a GetOfferrequest.
offerProviderID					String, 1 - 28 digits	Optional (0-1)	The subscriber number as represented in the SDP database for the provider.
attributeInformation					Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
	attributeName				String, 1 - 128 characters	Mandatory	The name of the attribute.
	attributeValueString				String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
	attributeValueDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	The date value of an attribute. DateMin to DateMax or DateInfinite
	attributeValueDecimal				Sub-MO	Mandatory	Information about a decimal value.
		attributeValueNumber			String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
		numberOfDecimals			Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
	attributeValueInteger				Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute.
	attributeSource				Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contains the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
treeParameterSetInformation					Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
	serviceProvider				Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
	treeParameterInformation				Sub-MO	Optional (0-n)	Contains information about a treeParameter.
		treeParameterName			String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
		treeParameterValueString			String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
		treeParameterValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
		treeParameterValueDecimal			Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
			treeParameterValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter contains information about where to put the decimal sign counted in positions from the right.
		treeParameterValueInteger			String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
		treeParameterValueSchedule				Optional (0-1)	Contains values for a schedule event.
			scheduledFrequency		Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
			scheduledInterval		Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
			scheduledMonth		Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
			scheduledDayOfMonth		Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
			scheduledDayOfWeek		Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
			scheduledHour		Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
			scheduledMinute		Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
			scheduledSecond		Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
		treeParameterValueDayOfWeek			Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
		treeParameterValueDateRange			Sub-MO	Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
			treeParameterStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
			treeParameterEndDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
		treeParameterValueTime			String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
		treeParameterSource			Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
		associatedPartyID			String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
productOfferingName					String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
negotiatedCapabilities					Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities					Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

8.3 Examples

This section gives an example of the deleteOffer request and response message. This example shows how to delete an AIR offer.

Request Example

Example 78 Delete Offer Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>5b96b03b62c9445fac3862d4632aabeb</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Delete>
         <cai3:MOType>Offer@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
            <air:offerID>102</air:offerID>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:deleteOffer subscriberNumber="465273152000001" offerID="102">
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:originOperatorID>operator1997</air:originOperatorID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:deleteOffer>
         </cai3:MOAttributes>
      </cai3:Delete>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 79 Delete Offer Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>5b96b03b62c9445fac3862d4632aabeb</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <DeleteResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOId>
            <air:subscriberNumber xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">465273152000001
            </air:subscriberNumber>
            <air:offerID xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
             102</air:offerID>
         </MOId>
         <MOAttributes>
            <deleteOfferResponse:deleteOfferResponse 
xmlns="http://schemas.ericsson.com/ma/CS/AIR/" 
xmlns:deleteOfferResponse="http://schemas.ericsson.com/ma/CS/AIR/">
               <subscriberNumber>465273152000001</subscriberNumber>
               <originTransactionID>14430815310782731534</originTransactionID>
               <originOperatorID>operator1997</originOperatorID>
               <offerID>102</offerID>
               <startDateTime>2015-09-24T09:56:49+02:00</startDateTime>
               <expiryDateTime>9999-12-31T12:00:00+00:00</expiryDateTime>
               <offerType>3</offerType>
               <offerProviderID>465273152000001</offerProviderID>
               <negotiatedCapabilities>0</negotiatedCapabilities>
               <availableServerCapabilities>805646916</availableServerCapabilities>
            </deleteOfferResponse:deleteOfferResponse>
         </MOAttributes>
      </DeleteResponse>
   </S:Body>
</S:Envelope>

9 Set AIR refill

This section covers the AIR command setRefill.

MOType

Refill@http://schemas.ericsson.com/ma/CS/AIR/

9.1 Request Data

9.1.1 Parameters

MOId

Table 32 Set Refill MOId
Parameter	Type	Occurrence	Description
`subscriberNumber`	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by `subscriberNumberNAI` parameter.

MOAttributes

Table 33 covers the parameters that can be used in a setRefill request.

Table 33 Set Refill Parameters
Parameter		Type	Occurrence	Description
originNodeType		String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName		String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill. If this parameter is absent from the request, Dynamic Activation will generate System time milliseconds plus seven ramdon digital numbers as the parameter to NEs.
originTimeStamp		String: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation. If this parameter is absent from the request, Dynamic Activation will generate PGN system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic.
subscriberNumberNAI		Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
originOperatorID		String, 1- 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It can be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate the default "operator" or the configured `OriginOperatorId` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic configure.
externalData1		String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
externalData2		String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
externalData3		String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
externalData4		String, 1 - 128	Optional (0-1)	A spare parameter for customizations to include in data records.
transactionType		String, 1 - 30 characters	Optional (0-1)	Specify the operation in more detail. It associate a description of a certain operation along with `transactionCode`.
transactionCode		String, 1 - 30 characters	Optional (0-1)	Specify the operation in more detail. It associate a description of a certain operation along with `transactionType`.
messageCapabilityFlag		Sub-MO	Optional (0-1)	The possible actions that may be performed on the account due to an operation initiated over this protocol.
	promotionNotificationFlag	Boolean { 0, 1 } 0 (false) = Default value. Promotion notification code will not be cleared after delivery in response. 1 (true) = Promotion notification code will be cleared after delivery in response.	Optional (0-1)	Indicate whether the promotion notification code shall be cleared or not after delivery in response.
	firstIVRCallSetFlag	Boolean { 0, 1 } 0 (false) = Do not set first IVR call done flag. 1 (true) = Set first IVR call done flag.	Optional (0-1)	Indicate whether the first IVR call done flag shall be set or not.
	accountActivationFlag	Boolean { 0, 1 } 0 (false) = Default value. Pre-activated accounts will not be activated due to the request. Account can however be activated if service fee and supervision expiry dates are set as a result of this request. In this case neither the initial balance nor the life-cycle dates from the pre-activation configuration will not be given. 1 (true) = Pre-activated accounts may be activated due to the request. If service fee and supervision expiry dates are explicitly received in the request these days will used and initial balance will be applied (but no additional days from the pre-activation configuration will be given). If service fee and supervision expiry dates are not explicitly set in the request initial life-cycle days and initial balance is applied.	Optional (0-1)	Indicate whether pre-activated accounts can be or cannot be activated due to the request. The possibility to activate a pre-activated account by this flag is configured in the account databases service class configuration. This results in that even if the flag is set to true the account may not be activated.
requestRefillAccountBeforeFlag		Boolean { 0, 1 } 0 (false) = Request account details before refill is not applied. 1 (true) = Request account details before refill is applied.	Optional (0-1)	The parameter contains the optional information that is requested.
requestRefillAccountAfterFlag		Boolean { 0, 1 } 0 (false) = Request account details after refill is not applied. 1 (true) = Request account details after refill is applied.	Optional (0-1)	The parameter contains optional information that is requested.
requestRefillDetailsFlag		Boolean { 0, 1 } 0 (false) = Request refill information is not applied. 1 (true) = Request refill information is applied.	Optional (0-1)	The parameter contains optional information that is requested.
requestSubDedicatedAccountDetailsFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not include the associated `subDedicatedAccountInformation structs`. 1 (true) = The response will include the associated `subDedicatedAccountInformation structs`.	Optional (0-1)	Indicate the requested detail level of the content in the `dedicatedAccountInformation`.
transactionAmount		String, 0 - 999 999 999 999	Optional (0-1)	The nominal value of the refill.
transactionCurrency		String, Currency	Optional (0-1)	The ID to point out what currency is used for the transaction. For example, SEK, EUR, USD, etc.
refillProfileID		String, 1 - 4 characters	Optional (0-1)	The parameter contains a refill profile that is converted into a segmentation identity by the AIR server.
voucherActivationCode		String, 8 - 20 digits	Optional (0-1)	The activation number which is the unique secret code on the voucher which the subscriber uses when performing a voucher based refill of the account. The format includes support of leading zeroes.
selectedOption		Integer, 1- 999	Optional (0-1)	The value of the selected option. The values are configurable by the operator. The value is primarily used for Option Refill.
locationNumber		String, 1 - 20 digits	Optional (0-1)	The parameter contains the location of the subscriber. The default numbering format in the parameter is the same numbering format that is used for subscriber numbers in the Account Database. If another format is used, then it must be indicated by ‘‘Location Number NAI’’
locationNumberNAI		Integer, 0 -2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The locationNumberNAI (Nature of Address Indicator) parameter identifies the format of the ‘‘location Number’’.
refillType		Integer, 1-999 1 = Value Refill 2 = Account Refill 3 = Premium Refill 4~99 = Reserved for future use 100~999 = Operator defined	Optional (0-1)	The refillType parameter specifies the kind of refill, it is part of both the refill request and refill response. The refillType parameter in a request specifies the wanted type of refill; this parameter can be validated or ignored depending of the configuration.
cellIdentifier		String, 1 - 19 1 - 19 = Numeric 10 - 19 CAP = 14 CGI/SAI	Optional (0-1)	The parameter output the CellGlobal Identity (CGI) or Service Area Identity (SAI). It can be sent as an input parameter through UCIP. If not sent as parameter, this parameter is retrieved from the HLR using ATI request. The cellIdentifier parameter can also be a return parameter through UCIP.
validateSubscriberLocation		Boolean { 0, 1 } 0 (false) = Default value. Do not perform validation. 1 (true) = Perform validation	Optional (0-1)	Indicates whether a validation of the subscriber location should be performed or not.
treeDefinedField		Sub-MO	Optional (0-1)
	treeDefinedFieldName	String, 1 - 15 characters	Mandatory	The defined name of the TDF.
	treeDefinedFieldType	String	Mandatory	The treeDefinedFieldType parameter holds the defined type of the TDF. Possible value are list as below: Boolean String Long
	treeDefinedFieldValue	String Alphanumeric Ranger: Depends on treeDefinedFieldType Boolean "true", "false" String Allowed characters: All	Mandatory	The treeDefinedFieldValue parameter contains the defined value of the TDF.
requestAttributesFlag		Boolean { 0, 1 } 0 (false) = Default value. The response will not contain attributes. 1 (true) The response will contain attributes, if existing.	Optional (0-1)	Indicate whether the attribute stored for the offer is to be included in a response.
negotiatedCapabilities		Interger: array of <int> or <i4> 0 - 2147483647	Optional (0-n)	Indicates the negotiated capabilities between the client and server node. The capabilities are presented as a series of elements, where each element contains an integer value between 0 and 2147483647. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active..

9.2 Response Data

9.2.1 Parameters

MOAttributes

The following tables cover the parameters that can be used in a setRefill response.

Table 34 Set Refill Parameters (Part I)
Parameter					Type	Occurrence	Description
subscriberNumber					String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID					String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originOperatorID					String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example.
masterAccountNumber					String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the master subscriber in a multi user account. The format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeros.
languageIDCurrent					Integer, 1 - 4 1 = Operator specific language 1 2 = Operator specific language 2 3 = Operator specific language 3 4 = Operator specific language 4	Optional (0-1)	The preferred language of the subscriber.
promotionAnnouncementCode					Integer, 0 - 99	Optional (0-1)	The promotional code for the announcement to be played.
voucherAgent					String, 1 - 8 characters	Optional (0-1)	The dealer who received the vouchers from the service provider (as defined when creating the vouchers).
voucherSerialNumber					String, 8 - 20 digits	Optional (0-1)	The vouchers serial number. Mandatory for voucher based refill and not needed for voucherless refill.
voucherGroup					String, 1 - 4 characters	Optional (0-1)	The unique identity of the card group that is associated to the voucher.
transactionCurrency					String, Currency	Optional (0-1)	The ID to point out what currency is used for the transaction. For example, SEK, EUR, USD, etc.
transactionAmount					String, 0 - 999 999 999 999	Optional (0-1)	The nominal value of the refill. A transaction parameter includes data regarding a requested change.
transactionAmountConverted					String, 0 - 999 999 999 999	Optional (0-1)	The ‘Transaction Amount Refill’ that has been converted into the currency of the account.
currency1					String, Currency	Optional (0-1)	The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
currency2					String, Currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
refillInformation					Sub-MO	Optional (0-1)	Contain information the refillvalue Total and Promotion.
	refillValueTotal				Sub-MO	Mandatory	The total values applied to account (including market segmentation and promotion). It contains the resulting values that will be applied to the account, both for the added amounts and dates.
		refillAmount1			Sting, 0 - 9 223 372 036 854 775 807	Mandatory	Refill value towards the main account in the first currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
		refillAmount2			Sting, 0 - 9 223 372 036 854 775 807	Optional (0-1)	Refill value towards the main account in the second currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
		supervisionDaysExtended			Integer, 0 - 2147483647	Optional (0-1)	Number of days the supervision period has been extended as a result of the refill. The part is given in number of days.
		serviceFeeDaysExtended			Integer, 0 - 2147483647	Optional (0-1)	Number of days the service fee period has been extended as a result of the refill. The part is given in number of days.
		dedicatedAccountRefillInformation			Sub-MO	Optional (0-n)	The Refill information of dedicated Account.
			dedicatedAccountID		Integer, 0 - 2147483647	Optional (0-1)	Identity of the dedicated account in order to be able to distinguish between the various dedicated accounts.
			refillAmount1		Sting, 0 - 9 223 372 036 854 775 807	Optional (0-1)	Refill value towards the main account in the first currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
			refillAmount2		Sting, 0 - 9 223 372 036 854 775 807	Optional (0-1)	Refill value towards the main account in the second currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
			expiryDateExtended		Integer, 0 - 65535 0 = Expiry date has been changed to no expiry date. 1 - 65535 = Expiry date has been extended.	Optional (0-1)	The expiry date for a dedicated account has been extended. The part is given in number of days.
			clearedValue1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807	Optional (0-1)	The units cleared for the dedicated account of subscriber when the dedicated account is removed. For example, a dedicated account might be removed at a service class change, or when the account is deleted. It indicates that the units cleared is in the first currency to be announced If the unit type is other than money the clearedValue1 contains the amount of the valid units and clearedValue2 is omitted.
			clearedValue2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807	Optional (0-1)	The units cleared for the dedicated account of subscriber when the dedicated account is removed. For example, a dedicated account might be removed at a service class change, or when the account is deleted. It indicates that the units cleared is in the second currency to be announced If the unit type is other than money the clearedValue1 contains the amount of the valid units and clearedValue2 is omitted.
			offerID		Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
			subDedicatedAccountRefillInformation		Sub-MO	Optional (0-1)	The refill information of sub dedicated account.
				startDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
				expiryDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
				refillAmount1	Sting, 0 - 9 223 372 036 854 775 807	Optional (0-1)	Refill value towards the main account in the first currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
				refillAmount2	Sting, 0 - 9 223 372 036 854 775 807	Optional (0-1)	Refill value towards the main account in the second currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
				clearedValue1	String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807	Optional (0-1)	The units cleared for the dedicated account of subscriber when the dedicated account is removed. For example, a dedicated account might be removed at a service class change, or when the account is deleted. It indicates that the units cleared is in the first currency to be announced If the unit type is other than money the clearedValue1 contains the amount of the valid units and clearedValue2 is omitted.
				clearedValue2	String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807	Optional (0-1)	The units cleared for the dedicated account of subscriber when the dedicated account is removed. For example, a dedicated account might be removed at a service class change, or when the account is deleted. It indicates that the units cleared is in the second currency to be announced If the unit type is other than money the clearedValue1 contains the amount of the valid units and clearedValue2 is omitted.
			dedicatedAccountUnitType		Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional
		usageAccumulatorInformation			Sub-MO	Optional (0-n)	Information of usage accumulator.
			accumulatorID		Integer, 1 - 2147483647	Optional (0-1)	The identity of accumulator.
			accumulatorValue		Integer, -2147483648 to 2147483647	Optional (0-1)	The value of accumulator.
	refillValuePromotion				Sub-MO	Optional (0-1)	The resulting promotion values that is applied to the account (including market segmentation and promotion). It contains the resulting values that will be applied to the account, both for the added amounts and dates.
		refillAmount1			Sting, 0 - 9 223 372 036 854 775 807	Mandatory	Refill value towards the main account in the first currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
		refillAmount2			Sting, 0 - 9 223 372 036 854 775 807	Optional (0-1)	Refill value towards the main account in the second currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
		supervisionDaysExtended			Integer, 0 - 2147483647	Optional (0-1)	Number of days the supervision period has been extended as a result of the refill. The part is given in number of days.
		serviceFeeDaysExtended			Integer, 0 - 2147483647	Optional (0-1)	Number of days the service fee period has been extended as a result of the refill. The part is given in number of days.
		dedicatedAccountRefillInformation			Sub-MO	Optional (0-n)	The Refill information of dedicated Account.
			dedicatedAccountID		Integer, 1 - 2147483647	Optional (0-1)	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts.
			refillAmount1		Sting, 0 - 9 223 372 036 854 775 807	Optional (0-1)	Refill value towards the main account in the first currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
			refillAmount2		Sting, 0 - 9 223 372 036 854 775 807	Optional (0-1)	Refill value towards the main account in the second currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
			expiryDateExtended		Integer, 0 - 65535 0 = Expiry date has been changed to no expiry date. 1 - 65535 = Expiry date has been extended.	Optional (0-1)	The expiry date for a dedicated account has been extended. The part is given in number of days.
			clearedValue1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807	Optional (0-1)	The units cleared for the dedicated account of subscriber when the dedicated account is removed. For example, a dedicated account might be removed at a service class change, or when the account is deleted. It indicates that the units cleared is in the first currency to be announced If the unit type is other than money the clearedValue1 contains the amount of the valid units and clearedValue2 is omitted.
			clearedValue2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807	Optional (0-1)	The units cleared for the dedicated account of subscriber when the dedicated account is removed. For example, a dedicated account might be removed at a service class change, or when the account is deleted. It indicates that the units cleared is in the second currency to be announced If the unit type is other than money the clearedValue1 contains the amount of the valid units and clearedValue2 is omitted.
			offerID		Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
			subDedicatedAccountRefillInformation		Sub-MO	Optional (0-1)	The refill information of sub dedicated account.
				startDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
				expiryDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
				refillAmount1	Sting, 0 - 9 223 372 036 854 775 807	Optional (0-1)	Refill value towards the main account in the first currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
				refillAmount2	Sting, 0 - 9 223 372 036 854 775 807	Optional (0-1)	Refill value towards the main account in the second currency. If the unit type is other than money the refillAmount1 contains the amount of the valid units and refillAmount2 is omitted.
				clearedValue1	String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807	Optional (0-1)	The units cleared for the dedicated account of subscriber when the dedicated account is removed. For example, a dedicated account might be removed at a service class change, or when the account is deleted. It indicates that the units cleared is in the first currency to be announced If the unit type is other than money the clearedValue1 contains the amount of the valid units and clearedValue2 is omitted.
				clearedValue2	String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807	Optional (0-1)	The units cleared for the dedicated account of subscriber when the dedicated account is removed. For example, a dedicated account might be removed at a service class change, or when the account is deleted. It indicates that the units cleared is in the second currency to be announced If the unit type is other than money the clearedValue1 contains the amount of the valid units and clearedValue2 is omitted.
			dedicatedAccountUnitType		Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4= The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		usageAccumulatorInformation			Sub-MO	Optional (0-n)	Information of usage accumulator.
			accumulatorID		Integer, 1 - 2147483647	Optional (0-1)	The identity of accumulator.
			accumulatorValue		Integer, -2147483648 to 2147483647	Optional (0-1)	The value of accumulator.
		serviceClassCurrent			Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
		serviceClassTemporaryExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of a temporary service class of an account. A temporary service class has precedence before the normally assigned service class, as long as the temporary service class date expiry date is not passed.
		promotionPlanProgressed			Boolean { 0, 1 } 0 (false) = Default value. No progress 1 (true) = Progression of promotion	Optional (0-1)	Indicate whether the result of the refill was a progression of promotion plan.
		supervisionDaysSurplus			Integer, 0 - 2147483647	Optional (0-1)	The number of days that was not possible to add (including any promotional part) as the date has exceed the maximum period allowed. The accounts actual supervision date will be set equal to the maximum allowed date.
		serviceFeeDaysSurplus			Integer, 0 - 2147483647	Optional (0-1)	The number of days that was not possible to add (including any promotional part) as the date has exceed the maximum period allowed. The accounts actual supervision date will be set equal to the maximum allowed date.
		promotionRefillAccumulatedValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of account refills made within the current promotion plan of a subscriber. It indicates the value in the first currency.
		promotionRefillAccumulatedValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of account refills made within the current promotion plan of a subscriber. It indicates the value in the second currency.
		promotionRefillCounter			Integer, 0 - 255	Optional (0-1)	The accumulated number of account refills within the current promotion plan of a subscriber.
		progressionRefillValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of refills for promotion plan progression. It indicates the value in the first currency.
		progressionRefillValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The accumulated value of refills for promotion plan progression. It indicates the value in the second currency.
		progressionRefillCounter			Integer, 0 - 255	Optional (0-1)	The value of the accumulated number of refills for promotion plan progression.

Table 35 Set Refill Parameters (Part II)
Parameter						Type	Occurrence	Description
accountBeforeRefill						Sub-MO	Optional (0-1)	The financial and lifecycle data of the account before the refill is applied.
	serviceClassTemporaryExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of a temporary service class of an account. A temporary service class has precedence before the normally assigned service class, as long as the temporary service class date expiry date is not passed.
	serviceClassOriginal					Integer, 0 - 9999	Optional (0-1)	The identity of the original service class when a temporary service class is active for an account. In case serviceClassOriginal is returned then the serviceClassCurrent will contain the temporary service class currently active for the account. When a temporary service class is active and a Return Service Class ID is specified, the serviceClassOriginal parameter will contain the identity of the return service class instead of the original service class. The account will then return to the specified Return Service Class ID when the temporary service class expires.
	serviceClassCurrent					Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber. This might be a temporary Service Class, which is controlled by a temporary Service Class expiry date (separate parameter).
	accountFlags					Sub-MO	Optional (0-1)	The life cycle state flags of the account, indicating the actual status of the account.
		activationStatusFlag				Boolean { 0, 1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
		negativeBarringStatusFlag				Boolean { 0, 1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
		supervisionPeriodWarningActiveFlag				Boolean { 0, 1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
		serviceFeePeriodWarningActiveFlag				Boolean { 0, 1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
		supervisionPeriodExpiryFlag				Boolean { 0, 1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
		serviceFeePeriodExpiryFlag				Boolean { 0, 1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate if the service fee period date has expired or not.
	promotionPlanID					String, 1 - 4 characters	Optional (0-1)	The identity of one of the current promotion plans of a subscriber.
	serviceFeeExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of the service fee period.
	supervisionExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of the supervision period.
	creditClearanceDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the credit clearance period will expire.
	serviceRemovalDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the account will be removed after the service removal period has expired.
	accountValue1					String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The account value for the master account of subscriber. This is not taking in consideration any ongoing chargeable events. It indicates an account value in the first currency.
	accountValue2					String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The account value for the master account of subscriber. This is not taking in consideration any ongoing chargeable events. It indicates an account value in the second currency.
	dedicatedAccountInformation					Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
		dedicatedAccountID				Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		dedicatedAccountValue1				String, 0 - 9 223 372 036 854 775 807 Unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
		dedicatedAccountValue2				String, 0 - 9 223 372 036 854 775 807 Unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
		expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Value Range: DateMin to DateMax or DateInfinite
		startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
		pamServiceID				Integer, 0 - 99	Optional (0-1)	The identity of the periodic account management service.
		offerID				Integer, 0 - 2147483647	Optional (0-1)	The identity of an offer.
		productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		closestExpiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. Value Range: DateToday to DateMax
		closestExpiryValue1				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestExpiryValue2				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestAccessibleDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. Value Range: DateToday to DateMax
		closestAccessibleValue1				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		closestAccessibleValue2				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		subDedicatedAccountInformation				Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Value Range: DateMin to DateMax or DateInfinite
		dedicatedAccountActiveValue1				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountActiveValue2				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountUnitType				Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4= The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		compositeDedicatedAccountFlag				Boolean { 1 }	Optional (0-1)	This flag indicates that a dedicated account is a composite dedicated account. It is used to identify a composite dedicated account that does not have any sub dedicated accounts.
	usageAccumulatorInformation					Sub-MO	Optional (0-n)	Information of usage accumulator.
		accumulatorID				Integer, 1 - 2147483647	Optional (0-1)	The identity of accumulator.
		accumulatorValue				Integer, -2147483648 to 2147483647	Optional (0-1)	The value of accumulator.
	serviceOfferings					Sub-MO	Optional (0-n)	The values of the service offerings defined on an account. It has to be matched to the definitions of the tariff tree.
		serviceOfferingID				Integer, 1 - 31	Mandatory	The identity of a current service offering defined on an account.
		serviceOfferingActiveFlag				Boolean { 0, 1 } 0 (false) = The service offering is not active. 1 (true) = The service offering is active.	Mandatory	Whether a specific service offering pointed out by the serviceOfferingID parameter is active or not.
	communityID					String	Mandatory (1-n)	The identity of the community the subscriber belong to.
	offerInformation					Sub-MO	Optional (0-n)	Dates (or dates and time) for offers.
		offerID				Integer, 0 - 2147483647	Mandatory	The identity of an offer.
		startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account, Value Range: DateMin to DateMax or DateInfinite
		startDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Value Range: DateMin to DateMax or DateInfinite
		pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerType				Integer, 0 - 7	Optional (0-1)	The identifies the offer type.
		offerState				Integer, 0 - 99 0 = Enabled offer state 1 = Disabled offer state 2-99 = Reserved for future use	Optional (0-1)	Specifies the actual offer state to return in a GetOfferrequest.
		offerProviderID				String, 1 - 28 digits	Optional (0-1)	The subscriber number as represented in the SDP database for the provider.
		productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		usageCounterUsageThresholdInformation				Sub-MO	Optional (0-n)	All active usage counters with their thresholds for a subscriber.
			usageCounterID			Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
			usageCounterValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter.
			usageCounterNominalValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter, without any factor.
			usageCounterMonetaryValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the first currency.
			usageCounterMonetaryNominalValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the first currency.
			usageCounterMonetaryValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the second currency.
			usageCounterMonetaryNominalValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the second currency.
			usageThresholdInformation			Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
				usageThresholdID		Integer, 1 - 2147483647	Mandatory	The ID of a usage threshold.
				usageThresholdValue		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
				usageThresholdMonetaryValue1		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
				usageThresholdMonetaryValue2		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
				usageThresholdSource		Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
				associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
			associatedPartyID			String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		dedicatedAccountChangeInformation				Sub-MO	Optional (0-n)	Information of changes done to balances and dates for dedicated accounts.
			dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
			offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
			closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
			closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
			closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			subDedicatedAccountChangeInformation			Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
				changedAmount1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the first currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
				changedAmount2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the second currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
				dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
				dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
				changedExpiryDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
				newExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new expiry date for a dedicated account.
				clearedExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous expiry date for a cleared dedicated account. DateMin to DateMax or DateInfinite
				changedStartDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the start date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
				newStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new start date for a dedicated account. DateMin to DateMax or DateBeginningOfTime
				clearedStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous start date for a cleared dedicated account. DateMin to DateMax or DateBeginningOfTime
			dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		dedicatedAccountInformation				Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
			dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
			offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
			closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
			closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
			closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			subDedicatedAccountInformation			Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
				dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
				dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
				startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
				expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
			compositeDedicatedAccountFlag			Boolean { 1 }	Optional (0-1)	Indicate that a dedicated account is a composite dedicated account. It is used to identify a composite dedicated account that does not have any sub dedicated accounts
		attributeInformation				Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
			attributeName			String, 1 - 128 characters	Mandatory	The name of the attribute.
			attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
			attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
			attributeValueDecimal			Sub-MO	Optional (0-1)	Information about a decimal value.
				attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
				numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
			attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute.
			attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contains the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
		treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
			serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
			treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about a treeParameter.
				treeParameterName		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
				treeParameterValueString		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
				treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
				treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
					treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
					numberOfDecimals	Integer, 0 - 15	Mandatory	The parameter contains information about where to put the decimal sign counted in positions from the right.
				treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
				treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
					scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
					scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
					scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
					scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
					scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
					scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
					scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
					scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
				treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
				treeParameterValueDateRange		Sub-MO	Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
					treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
					treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
				treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
				treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
				associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.

Table 36 Set Refill Parameters (Part III)
Parameter						Type	Occurrence	Description
accountAfterRefill						Sub-MO	Optional (0-1)	Contain financial and lifecycle data that affected during a refill.
	serviceClassTemporaryExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date of a temporary service class of an account. A temporary service class has precedence before the normally assigned service class, as long as the temporary service class date expiry date is not passed.
	serviceClassOriginal					Integer, 0 - 9999	Optional (0-1)	The identity of the original service class when a temporary service class is active for an account. In case serviceClassOriginal is returned then the serviceClassCurrent will contain the temporary service class currently active for the account. When a temporary service class is active and a Return Service Class ID is specified, the serviceClassOriginal parameter will contain the identity of the return service class instead of the original service class. The account will then return to the specified Return Service Class ID when the temporary service class expires.
	serviceClassCurrent					Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
	accountFlags					Sub-MO	Optional (0-1)	The life cycle state flags of the account, indicating the actual status of the account.
		activationStatusFlag				Boolean { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
		negativeBarringStatusFlag				Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
		supervisionPeriodWarningActiveFlag				Boolean { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
		serviceFeePeriodWarningActiveFlag				Boolean { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
		supervisionPeriodExpiryFlag				Boolean { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
		serviceFeePeriodExpiryFlag				Boolean { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
	promotionPlanID					String, 1 - 4 characters	Optional (0-1)	The identity of one of the current promotion plans of a subscriber.
	serviceFeeExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Expiry date of the service fee period.
	supervisionExpiryDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Expiry date of the supervision period.
	creditClearanceDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when the credit clearance period will expire.
	serviceRemovalDate					DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date when the account will be removed after the service removal period has expired.
	accountValue1					String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The account value for the master account of subscriber. This is not taking in consideration any ongoing chargeable events. It indicates an account value in the first currency.
	accountValue2					String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The account value for the master account of subscriber. This is not taking in consideration any ongoing chargeable events. It indicates an account value in the second currency.
	dedicatedAccountInformation					Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
		dedicatedAccountID				Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
		dedicatedAccountValue1				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		dedicatedAccountValue2				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
		expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
		pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerID				Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
		productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		closestExpiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
		closestExpiryValue1				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestExpiryValue2				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
		closestAccessibleDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
		closestAccessibleValue1				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		closestAccessibleValue2				String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
		subDedicatedAccountInformation				Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
		dedicatedAccountActiveValue1				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountActiveValue2				String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
		dedicatedAccountUnitType				Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		compositeDedicatedAccountFlag				Boolean { 1 }	Optional (0-1)	This flag indicates that a dedicated account is a composite dedicated account. It is used to identify a composite dedicated account that does not have any sub dedicated accounts.
	usageAccumulatorInformation					Sub-MO	Optional (0-n)	Information of usage accumulator.
		accumulatorID				Integer, 1 - 2147483647	Optional (0-1)	The identity of accumulator.
		accumulatorValue				Integer, -2147483648 to 2147483647	Optional (0-1)	The value of accumulator.
	serviceOfferings					Sub-MO	Optional (0-n)	The values of the service offerings defined on an account. It has to be matched to the definitions of the tariff tree.
		serviceOfferingID				Integer, 1 - 31	Mandatory	The identity of a current service offering defined on an account.
		serviceOfferingActiveFlag				Boolean { 0, 1 } 0 (false) = The service offering is not active. 1 (true) = The service offering is active.	Mandatory	Whether a specific service offering pointed out by the serviceOfferingID parameter is active or not.
	communityID					Integer, 1- 9 999 999	Mandatory (1-n)	The identity of the community the subscriber belong to.
	offerInformation					Sub-MO	Optional (0-n)	Dates (or dates and time) for offers.
		offerID				Integer, 0 - 2147483647	Mandatory	The identity of an offer.
		startDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDate				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account, Value Range: DateMin to DateMax or DateInfinite
		startDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The start date and time for an offer. Value Range: DateMin to DateMax or DateBeginningOfTime
		expiryDateTime				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date and time. Value Range: DateMin to DateMax or DateInfinite
		pamServiceID				Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
		offerType				Integer, 0 - 7	Optional (0-1)	The identifies the offer type.
		offerState				Integer, 0 - 99 0 = Enabled offer state 1 = Disabled offer state 2-99 = Reserved for future use	Optional (0-1)	Specifies the actual offer state to return in a GetOfferrequest.
		offerProviderID				String, 1 - 28 digits	Optional (0-1)	The subscriber number as represented in the SDP database for the provider.
		productID				Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		usageCounterUsageThresholdInformation				Sub-MO	Optional (0-n)	All active usage counters with their thresholds for a subscriber.
			usageCounterID			Integer, 1 - 2147483647	Mandatory	The id of a usage counter.
			usageCounterValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter.
			usageCounterNominalValue			String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage counter, without any factor.
			usageCounterMonetaryValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the first currency.
			usageCounterMonetaryNominalValue1			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the first currency.
			usageCounterMonetaryValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter. It indicates a usage counter amount in the second currency.
			usageCounterMonetaryNominalValue2			String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage counter, without any factor. It indicates a usage counter amount in the second currency.
			usageThresholdInformation			Sub-MO	Optional (0-n)	All information about a usage threshold. Depending on the usage counted the threshold value is represented either in the usageThresholdValue parameter or the usage ThresholdMonetaryValue1 or usageThresholdMonetaryValue2 parameter. The usageThresholdSource parameter can not be updated but is included in responses.
				usageThresholdID		Integer, 1 - 2147483647	Optional (0-1)	The ID of a usage threshold.
				usageThresholdValue		String, 0 - 9 223 372 036 854 775 807 digits	Optional (0-1)	The value of a non-monetary usage threshold.
				usageThresholdMonetaryValue1		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the first currency.
				usageThresholdMonetaryValue2		String, 0 - 999 999 999 999 price	Optional (0-1)	The value of a monetary usage threshold. It indicates a usage threshold amount in the second currency.
				usageThresholdSource		Integer, 1 - 3 1 = Personal - The threshold has been changed to a value other than the usage counter definition and is fetched from the subscriber. 2 = Common - The threshold has been changed to an individual value for a provider shared by all consumers. 3 = Default - The threshold value fetched from the usage counter definition.	Optional (0-1)	The source of a usage threshold.
				associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
			associatedPartyID			String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
		dedicatedAccountChangeInformation				Sub-MO	Optional (0-n)	Information of changes done to balances and dates for dedicated accounts.
			dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
			offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
			closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
			closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
			closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			subDedicatedAccountChangeInformation			Sub-MO	Optional (0-n)	Information about the changes made to a sub dedicated account.
				changedAmount1		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the first currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
				changedAmount2		String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The parameter defines changed values on a main or dedicated account. It indicates a changed amount in the second currency. If the unit type is other than money the changedAmount1 contains the amount of the valid units and changedAmount2 is omitted.
				dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the first currency.
				dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807. It indicates the balance in the second currency.
				changedExpiryDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the expiry date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
				newExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new expiry date for a dedicated account.
				clearedExpiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous expiry date for a cleared dedicated account. DateMin to DateMax or DateInfinite
				changedStartDate		Integer, -65535 to 65535	Optional (0-1)	The number of days the start date for a dedicated account has been changed as a result of the operation. The value is given in number of days.
				newStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The new start date for a dedicated account. DateMin to DateMax or DateBeginningOfTime
				clearedStartDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The previous start date for a cleared dedicated account. DateMin to DateMax or DateBeginningOfTime
			dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
		dedicatedAccountInformation				Sub-MO	Optional (0-n)	Balances and dates for dedicated accounts.
			dedicatedAccountID			Integer, 1 - 2147483647	Mandatory	The identity of the dedicated account in order to be able to distinguish between the various dedicated accounts in an array of dedicated accounts.
			dedicatedAccountValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			dedicatedAccountValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
			expiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			startDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
			pamServiceID			Integer, 0 - 99	Optional (0-1)	The id of the periodic account management service.
			offerID			Integer, 1 - 2147483647	Optional (0-1)	The identity of an offer.
			productID			Integer, 0 - 2147483647	Optional (0-1)	The identity of a product. Zero can only be received in a response where it indicates that a personal usage threshold value exists for the usage counter and there may exist zero or more additional product local usage counters which have not been used yet.
			closestExpiryDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will expire, this include both active and inactive sub dedicated accounts. DateToday to DateMax
			closestExpiryValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the first currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestExpiryValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest expiry date, this include both active and in active sub dedicated accounts. It indicates the balance of the second currency. If the unit type is other than money the closestExpiryValue1 contains the amount of the valid units and closestExpiryValue2 is omitted.
			closestAccessibleDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when the next sub dedicated account(s) will be accessible. This parameter is only valid for composite dedicated accounts. DateToday to DateMax
			closestAccessibleValue1			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the first currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			closestAccessibleValue2			String, -9 223 372 036 854 775 807 to 9 223 372 036 854 775 807 unit	Optional (0-1)	The balance of the sub dedicated account(s) with the closest start date. This parameter is only valid for composite dedicated accounts. It indicates the balance in the second currency. If the unit type is other than money the closestAccessibleValue1 contains the sum of the valid units and closestAccessibleValue2 is omitted.
			subDedicatedAccountInformation			Sub-MO	Optional (0-n)	Balances and dates for sub dedicated accounts.
				dedicatedAccountValue1		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the first currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
				dedicatedAccountValue2		String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	The total balance of the dedicated account, this includes all currently active and not yet active balances of the dedicated account if applicable. This is not taking in consideration any ongoing chargeable events. It indicates that the balance is in the second currency. If the unit type is not money the dedicatedAccountValue1 contains the sum of the valid units and dedicatedAccountValue2 is omitted. When dedicatedAccountUnitType is Money, the parameter can contain both an integer part and a decimal part. There is no decimal separator, the decimal part is given directly to the right of the integer part. The number of digits in the decimal part is configured in the currency configuration. The integer part range is: 0-9223372036854. The decimal part can consist of 0 to 6 digits, that is maximum value is 999999. If the maximum value of the integer part is reached the maximum decimal part is 775807.
				startDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date when a dedicated account, FaF entry or offer will be considered as active. The parameter may also be used to define start date for other entities depending on the context where it is used. Element Value Range: DateMin to DateMax or DateBeginningOfTime
				expiryDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The expiry date for a dedicated account. Element Value Range: DateMin to DateMax or DateInfinite
			dedicatedAccountActiveValue1			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the first currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountActiveValue2			String, 0 - 9 223 372 036 854 775 807 unit	Optional (0-1)	This parameter contains a dedicated account balance that can be consumed right now. This is not taking in consideration any ongoing chargeable events. The active value is only valid for composite dedicated account as they can have resources that becomes accessible later. It indicates that the balance is in the second currency. If the unit type is other than money the dedicatedAccountActiveValue1 contains the sum of the valid units and dedicatedAccountActiveValue2 is omitted.
			dedicatedAccountUnitType			Integer, 0 - 6 0 = The account contains time. 1 = The account contains money. 2 - 4 = The account contains total octets (Not used, reserved for future use). 5 = The account contains service specific units. 6 = The account contains volume.	Optional (0-1)	The unit of the dedicated account values and is mandatory if the function "multi unit" is active, in other case it is optional.
			compositeDedicatedAccountFlag			Boolean { 1 }	Optional (0-1)	This flag indicates that a dedicated account is a composite dedicated account. It is used to identify a composite dedicated account that does not have any sub dedicated accounts.
		attributeInformation				Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
			attributeName			String, 1 - 128 characters	Mandatory	The name of the attribute.
			attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
			attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
			attributeValueDecimal			Sub-MO	Optional (0-1)	Information about a decimal value.
				attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
				numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
			attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute.
			attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contain the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
		treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
			serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
			treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about a treeParameter.
				treeParameterName		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
				treeParameterValueString		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
				treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
				treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
					treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
					numberOfDecimals	Integer, 0 - 15	Mandatory	The parameter contains information about where to put the decimal sign counted in positions from the right.
				treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
				treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
					scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
					scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
					scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
					scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
					scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
					scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
					scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
					scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
				treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
				treeParameterValueDateRange		Sub-MO	Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
					treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
					treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
				treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
				treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
				associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
		productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
refillFraudCount						Integer, 0 - 255	Optional (0-1)	Contain the number of fraudulent refill attempts left, before the account becomes barred from refill.
selectedOption						Integer, 1 - 999	Optional (0-1)	The value of the selected option. The values are configurable by the operator. The value is primarily used for Option Refill.
segmentationID						String, 1 - 4 characters	Optional (0-1)	The value that was used for the branching in the refill trees.
refillType						Integer, 1-999 1 = Value Refill 2 = Account Refill 3 = Premium Refill 4~99 = Reserved for future use 100~999 = Operator defined	Optional (0-1)	The refillType parameter specifies the kind of refill, it is part of both the refill request and refill response.
accountPrepaidEmptyLimit1						String, -999 999 999 999 to 999 999 999 999	Optional (0-1)	The lowest allowed balance on an account. It indicates an account balance in the first currency
accountPrepaidEmptyLimit2						String, -999 999 999 999 to 999 999 999 999	Optional (0-1)	The lowest allowed balance on an account. It indicates an account balance in the second currency
treeDefinedField						Sub-MO	Optional (0-1)	Information about the Tree Defined Field values.
	treeDefinedFieldName					String, 1-200 characters	Mandatory	The name of the TDF.
	treeDefinedFieldType					String Enumeration value="Boolean" Enumeration value="String" Enumeration value="Long" Enumeration value="Amount"	Mandatory	The defined type of the TDF.
	treeDefinedFieldValue					String, depends on treeDefinedFieldType If treeDefinedFieldType is Boolean, then the value is "true" or "false" If treeDefinedFieldType is String, then the value is all allowed characters. If treeDefinedFieldType is Long, then the value is 1 - 9 digits. If treeDefinedFieldType is Amount, then the value is the Decimal value and currency code to hold a monetary amount.	Mandatory	The defined value of the TDF.
negotiatedCapabilities						Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities						Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

9.3 Examples

9.3.1 Example of Refilling with Voucher

This section gives an example of the setRefill request and response message. This example shows how to refill with voucher.

Request Example

Example 80 Set Refill Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
           <cai3:SessionId>e64d81502bc741bf9b2d9b8babec3ce2</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Refill@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000005</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setRefill subscriberNumber="465273152000005">
               <air:originNodeType>ADM</air:originNodeType>
               <air:voucherActivationCode>11111111</air:voucherActivationCode>
            </air:setRefill>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 81 Set Refill Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>e64d81502bc741bf9b2d9b8babec3ce2</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setRefillResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000005</air:subscriberNumber>
               <air:originTransactionID>43061763180304238</air:originTransactionID>
               <air:masterAccountNumber>465273152000005</air:masterAccountNumber>
               <air:languageIDCurrent>1</air:languageIDCurrent>
               <air:voucherAgent>1</air:voucherAgent>
               <air:voucherSerialNumber>11111111</air:voucherSerialNumber>
               <air:voucherGroup>1</air:voucherGroup>
               <air:currency1>SEK</air:currency1>
               <air:segmentationID>01</air:segmentationID>
               <air:refillType>0</air:refillType>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>805646916</air:availableServerCapabilities>
            </air:setRefillResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

9.3.2 Example of Refilling without Voucher

This section gives an example of the setRefill request and response message. This example shows how to refill without voucher.

Request Example

Example 82 Set Refill Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
           <cai3:SessionId>07581bf0857345109d3b24e6d2928258</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Refill@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000005</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setRefill subscriberNumber="465273152000005">
               <air:originNodeType>ADM</air:originNodeType>
               <air:transactionAmount>13</air:transactionAmount>
               <air:transactionCurrency>SEK</air:transactionCurrency>
               <air:refillProfileID>1</air:refillProfileID>
            </air:setRefill>
        </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 83 Set Refill Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>07581bf0857345109d3b24e6d2928258</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setRefillResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000005</air:subscriberNumber>
               <air:originTransactionID>43061763180304238</air:originTransactionID>
               <air:masterAccountNumber>465273152000005</air:masterAccountNumber>
               <air:languageIDCurrent>1</air:languageIDCurrent>
               <air:transactionCurrency>SEK</air:transactionCurrency>
               <air:transactionAmount>13</air:transactionAmount>
               <air:currency1>SEK</air:currency1>
               <air:segmentationID>MA</air:segmentationID>
               <air:refillType>0</air:refillType>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>805646916</air:availableServerCapabilities>
            </air:setRefillResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

10 Set AIR Communication ID

This section covers the AIR subscriber command setCommunicationID.

MOType

CommunicationID@http://schemas.ericsson.com/ma/CS/AIR/

10.1 Request Data

10.1.1 Parameters

MOId

Table 37 Set Communication ID Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 38 covers the parameters that can be used in a setCommunicationID request.

Table 38 Set Communication ID Parameters
Parameter		Type	Occurrence	Description
originNodeType		String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Mandatory	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName		String,1 - 255 characters	Mandatory	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Mandatory	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill. If this parameter is absent from the request, Dynamic Activation will generate System time milliseconds plus seven ramdon digital numbers as the parameter to NEs.
originTimeStamp		String: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	The date and time of sending the request by the entity that initiated the operation. If this parameter is absent from the request, Dynamic Activation will generate PGN system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic.
originOperatorID		String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate the default "operator" or the configured `OriginOperatorId` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic configure.
msisdnCurrent		String, 1 - 28 digits	Optional (0-1)	This parameter contains the existing subscriber identity of the subscriber. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
msisdnCurrentNAI		Integer, 0 - 7 0 = Unknown 1 = International number 2 = National significant number 3 = Network specific number 4 = Subscriber number 5 = Reserved 6 = Abbreviated Number 7 = Reserved for extension	Optional (0-1)	Nature of Address Indicator identifies the format of the msisdnCurrent parameter.
msisdnNew		String, 1 - 28 digits	Optional (0-1)	The MSISDN format of the msisdnNew parameter
msisdnNewNAI		Integer, 0 - 7 0 = Unknown 1 = International number 2 = National significant number 3 = Network specific number 4 = Subscriber number 5 = Reserved 6 = Abbreviated Number 7 = Reserved for extension	Optional (0-1)	Nature of Address Indicator identifies the format of the msisdnNew parameter.
imsiCurrent		String, 1 - 15 digits	Optional (0-1)	The subscriber's existing IMSI.
imsiNew		String, 1 - 15 digits	Optional (0-1)	The subscriber's new IMSI.
naiCurrent		String, 1-128 characters	Optional (0-1)	The subscriber's existing Network Access Identifier (NAI).
naiNew		String, 1-128 characters	Optional (0-1)	The subscriber's new Network Access Identifier (NAI).
sipUriCurrent		String, 1-128 characters	Optional (0-1)	The subscriber's existing SIP-URI.
sipUriNew		String, 1-128 characters	Optional (0-1)	The subscriber's new SIP-URI.
privateCurrent		String, 1-128 characters	Optional (0-1)	The subscriber's existing address in Private format.
privateNew		String, 1-128 characters	Optional (0-1)	The subscriber's new address in Private format.
chargingInformation		Sub-MO	Mandatory	Information for an charged Online Communication ID Change.
	chargingIndicator	Integer, 0 - 65535	Optional (0-1)	An indicator for rating differentiation.
	specifiedPrice	String, 0 - 999 999 999 999	Optional (0-1)	The price that shall be used to charge for the operation, instead of using the rating function normally used.
	transactionCurrency	String, Currency	Optional (0-1)	The ID to point out what currency is used for the transaction. For example, SEK, EUR, USD, etc.
	suppressDeduction	Boolean {0, 1} 0 (false) = Default value. Not suppressed deduction 1 (true) = Suppressed deduction	Optional (0-1)	Indicates if the calculated cost is to be withdrawn from the account or not.
externalContract		Boolean {0, 1} 0 (false) = Not an external contract, that is, the account resides in Charging Compound. 1 (true) = An external contract, the account resides outside Charging Compound.	Optional (0-1)	Indicate if the account resides in Charging Compound or in an external system in a convergent solution.
negotiatedCapabilities		Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.

10.2 Response Data

10.2.1 Parameters

MOAttributes

Table 39 covers the parameters that can be used in a setCommunicationID response.

Table 39 Set Communication ID Parameters
Parameter		Type	Occurrence	Description
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits	Mandatory	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
cleanupDate		DateTime.iso8601	Optional (0-1)	Information of how long an old Identifier is kept in parallel during an Online Communication ID change. DateToday to DateMax
originOperatorID		String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example.
deductionSuppressed		Boolean {0, 1} 0 (false) = Default value. Not suppressed deduction 1 (true) = Suppressed deduction	Optional (0-1)	Indicates if the calculated cost has not been withdrawn from the account or not.
chargingResultInformation		Sub-MO	Optional (0-1)	Information for a charged end user communication event.
	cost1	String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The cost for an event. It indicates a cost in the first currency.
	currency1	String, currency	Optional (0-1)	The first currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	cost2	String, -999 999 999 999 to 999 999 999 999 price	Optional (0-1)	The cost for an event. It indicates a cost in the second currency.
	currency2	String, currency	Optional (0-1)	The second currency to be presented to the end user. For example, SEK, EUR, USD, etc.
	chargingResultCode	Integer, 0 - 2 0 = or not present Successful 1 = No charge (free counter stepped) 2 = No charge (free counter not stepped)	Optional (0-1)	Information related to a charged event.
	reservationCorrelationID	Integer, 0 - 2147483647	Optional (0-1)	The id needed to correlate a reservation.
negotiatedCapabilities		Interger: array of <int> or <i4> 0 - 2147483647	Optional (0-n)	Indicates the negotiated capabilities between the client and server node. The capabilities are presented as a series of elements, where each element contains an integer value between 0 and 2147483647. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities		Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

10.3 Examples

This section gives an example of the setCommunicationID request and response message. This example shows how to set the communication ID .

Request Example

Example 84 Set Communication ID Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>12b27d765da5490b87a864dbb9a5a7fd</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>CommunicationID@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000010</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setCommunicationID subscriberNumber="465273152000010">
               <air:imsiCurrent>46001111222</air:imsiCurrent>
               <air:imsiNew>46001111223</air:imsiNew>
               <air:externalContract>1</air:externalContract>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setCommunicationID>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 85 Set Communication ID Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>12b27d765da5490b87a864dbb9a5a7fd</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setCommunicationIDResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:originTransactionID>1442804667204430352</air:originTransactionID>
               <air:cleanupDate>2015-12-20T12:00:00+00:00</air:cleanupDate>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>805646852</air:availableServerCapabilities>
            </air:setCommunicationIDResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

11 Get Accumulators

This section covers the AIR command getAccumulators.

MOType

Accumulators@http://schemas.ericsson.com/ma/CS/AIR/

11.1 Request Data

11.1.1 Parameters

MOId

Table 40 Get Accumulators MOId
Parameter	Type	Occurrence	Description
`subscriberNumber`	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by `subscriberNumberNAI` parameter.

MOAttributes

Table 41 covers the parameters that can be used in a getAccumulatorsResponse request.

Table 41 Get Accumulators Parameter
Parameter		Type	Occurrence	Description
originNodeType		String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point
originHostName		String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
originTimeStamp		String: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation.
subscriberNumberNAI		Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
messageCapabilityFlag			Optional (0-1)	The possible actions that may be performed on the account due to an operation initiated over this protocol.
	promotionNotificationFlag	Boolean { 0, 1 } 0 (false) = Default value. Promotion notification code will not be cleared after delivery in response. 1 (true) = Promotion notification code will be cleared after delivery in response.	Optional (0-1)	Indicate whether the promotion notification code shall be cleared or not after delivery in response.
	firstIVRCallSetFlag	Boolean { 0, 1 } 0 (false) = Do not set first IVR call done flag. 1 (true) = Set first IVR call done flag.	Optional (0-1)	Indicate whether the first IVR call done flag shall be set or not.
	accountActivationFlag	Boolean { 0, 1 } 0 (false) = Default value. Pre-activated accounts will not be activated due to the request. Account can however be activated if service fee and supervision expiry dates are set as a result of this request. In this case neither the initial balance nor the life-cycle dates from the pre-activation configuration will not be given. 1 (true) = Pre-activated accounts may be activated due to the request. If service fee and supervision expiry dates are explicitly received in the request these days will used and initial balance will be applied (but no additional days from the pre-activation configuration will be given). If service fee and supervision expiry dates are not explicitly set in the request initial life-cycle days and initial balance is applied.	Optional (0-1)	Indicate whether pre-activated accounts can be or cannot be activated due to the request. The possibility to activate a pre-activated account by this flag is configured in the account databases service class configuration. This results in that even if the flag is set to true the account may not be activated.
accumulatorSelection		Sub-Mo	Optional (0-n)	This parameter is used to select which usage accumulators that will be returned.
	accumulatorIDFirst	Interger, 1 - 2147483647	Mandatory	The first accumulator identity in a sequence of usage accumulators or the only accumulator identity if a single usage accumulator shall be obtained.
	accumulatorIDLast	Interger, 1 - 2147483647	Optional (0-1)	The last accumulator identity in a sequence of usage accumulators.
negotiatedCapabilities		Interger, 0 - 2147483647	Optional (0-n)	Indicates the negotiated capabilities between the client and server node. The capabilities are presented as a series of elements, where each element contains an integer value between 0 and 2147483647. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active..

11.2 Response Data

11.2.1 Parameters

MOId

Table 42 Get Accumulators Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 43 covers the parameters that can be used in a getAccumulators response.

Table 43 Get Accumulators Parameter
Parameter		Type	Occurrence	Description
subscriberNumber		String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
languageIDCurrent		Integer, 1 - 4 1 = Operator specific language 1 2 = Operator specific language 2 3 = Operator specific language 3 4 = Operator specific language 4	Mandatory	The preferred language of the subscriber.
serviceClassCurrent		Integer, 0 - 9999	Mandatory	The service class currently used by the subscriber.
accumulatorInformation			Optional (0-1)	The list information of accumulator.
	accumulatorID	Integer, 1 - 2147483647	Mandatory	The identity of accumulator.
	accumulatorValue	Integer, -2147483648 to 2147483647	Mandatory	The value of accumulator.
	accumulatorStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Indicates the date on which the accumulator was last reset.
	accumulatorEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Indicates the date on which the accumulator will be reset to the initial value again.
temporaryBlockedFlag		Boolean { 0, 1 } 0 (false) = Default value. Unblocked 1 (true) = Temporary blocked	Optional (0-1)	Indicate whether the subscriber and operator has access to subscriber and account data.
accountFlagsAfter			Optional (0-1)	Life cycle state flags of the account, indicating the actual status of the account after.
	activationStatusFlag	Boolean, { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
	negativeBarringStatusFlag	Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
	supervisionPeriodWarningActiveFlag	Boolean, { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
	serviceFeePeriodWarningActiveFlag	Boolean, { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
	supervisionPeriodExpiryFlag	Boolean, { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
	serviceFeePeriodExpiryFlag	Boolean, { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
accountFlagsBefore			Optional (0-1)	Life cycle state flags of the account, indicating the actual status of the account before.
	activationStatusFlag	Boolean, { 0,1 } 0 (false) = Default value. Account is not activated 1 (true) = Account is activated	Optional (0-1)	Indicate whether an account is activated or not.
	negativeBarringStatusFlag	Boolean { 0,1 } 0 (false) = Default value. Account is not barred due to negative balance. 1 (true) = Account is barred due to negative balance.	Optional (0-1)	Indicate whether an account is barred due to negative balance or not.
	supervisionPeriodWarningActiveFlag	Boolean, { 0,1 } 0 (false) = Default value. Supervision period date expiration warning not active. 1 (true) = Supervision period date expiration warning active.	Optional (0-1)	Indicate whether the supervision period date expiration warning is active or not.
	serviceFeePeriodWarningActiveFlag	Boolean, { 0,1 } 0 (false) = Default value. Service fee period date expiration warning not active. 1 (true) = Service fee period date expiration warning active	Optional (0-1)	Indicate whether the service fee period date expiration warning is active or not.
	supervisionPeriodExpiryFlag	Boolean, { 0,1 } 0 (false) = Default value. Supervision period date has not expired. 1 (true) = Supervision period date has expired.	Optional (0-1)	Indicate whether the supervision period date has expired or not.
	serviceFeePeriodExpiryFlag	Boolean, { 0,1 } 0 (false) = Default value. Service fee period date has not expired. 1 (true) = Service fee period date has expired.	Optional (0-1)	Indicate whether the service fee period date has expired or not.
negotiatedCapabilities		Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities		Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

11.3 Examples

This section gives an example of the getAccumulators request and response message. This example shows how to get Accumulators.

Request Example

Example 86 Get Accumulators Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SequenceId>12345</cai3:SequenceId>
      <cai3:TransactionId>12345</cai3:TransactionId>
      <cai3:SessionId>70c10a7fd2de4bed9ca3c03f2313af98</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Accumulators@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getAccumulators subscriberNumber="465273152000001">
               <air:originNodeType>ADM</air:originNodeType>
               <air:originHostName>node1</air:originHostName>
               <air:originTransactionID>00000</air:originTransactionID>
               <air:originTimeStamp>2015-10-01T12:00:00+00:00</air:originTimeStamp>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:messageCapabilityFlag>
                  <air:promotionNotificationFlag>0</air:promotionNotificationFlag>
                  <air:firstIVRCallSetFlag>0</air:firstIVRCallSetFlag>
                  <air:accountActivationFlag>0</air:accountActivationFlag>
               </air:messageCapabilityFlag>
               <air:accumulatorSelection>
                  <air:accumulatorIDFirst>1</air:accumulatorIDFirst>
                  <air:accumulatorIDLast>2</air:accumulatorIDLast>
               </air:accumulatorSelection>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:getAccumulators>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 87 Get Accumulators Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>70c10a7fd2de4bed9ca3c03f2313af98</cai3g:SessionId>
      <cai3g:TransactionId>12345</cai3g:TransactionId>
      <cai3g:SequenceId>12345</cai3g:SequenceId>
   </S:Header>
   <S:Body>
      <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:getAccumulatorsResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>00000</air:originTransactionID>
               <air:languageIDCurrent>1</air:languageIDCurrent>
               <air:serviceClassCurrent>111</air:serviceClassCurrent>
               <air:accumulatorInformation>
                  <air:accumulatorID>1</air:accumulatorID>
                  <air:accumulatorValue>2147483647</air:accumulatorValue>
                  <air:accumulatorStartDate>2015-10-01T12:00:00+00:00</air:accumulatorStartDate>
                  <air:accumulatorEndDate>2021-10-31T12:00:00+00:00</air:accumulatorEndDate>
               </air:accumulatorInformation>
               <air:accumulatorInformation>
                  <air:accumulatorID>2</air:accumulatorID>
                  <air:accumulatorValue>2147483647</air:accumulatorValue>
                  <air:accumulatorStartDate>2015-11-01T12:00:00+00:00</air:accumulatorStartDate>
                  <air:accumulatorEndDate>2024-12-16T12:00:00+00:00</air:accumulatorEndDate>
               </air:accumulatorInformation>
               <air:accountFlagsAfter>
                  <air:activationStatusFlag>1</air:activationStatusFlag>
                  <air:negativeBarringStatusFlag>0</air:negativeBarringStatusFlag>
                  <air:supervisionPeriodWarningActiveFlag>0</air:supervisionPeriodWarningActiveFlag>
                  <air:serviceFeePeriodWarningActiveFlag>0</air:serviceFeePeriodWarningActiveFlag>
                  <air:supervisionPeriodExpiryFlag>0</air:supervisionPeriodExpiryFlag>
                  <air:serviceFeePeriodExpiryFlag>0</air:serviceFeePeriodExpiryFlag>
               </air:accountFlagsAfter>
               <air:accountFlagsBefore>
                  <air:activationStatusFlag>1</air:activationStatusFlag>
                  <air:negativeBarringStatusFlag>0</air:negativeBarringStatusFlag>
                  <air:supervisionPeriodWarningActiveFlag>0</air:supervisionPeriodWarningActiveFlag>
                  <air:serviceFeePeriodWarningActiveFlag>0</air:serviceFeePeriodWarningActiveFlag>
                  <air:supervisionPeriodExpiryFlag>0</air:supervisionPeriodExpiryFlag>
                  <air:serviceFeePeriodExpiryFlag>0</air:serviceFeePeriodExpiryFlag>
               </air:accountFlagsBefore>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:getAccumulatorsResponse>
         </MOAttributes>
      </GetResponse>
   </S:Body>
</S:Envelope>

12 Set Accumulators

This section covers the AIR command setAccumulators.

MOType

Accumulators@http://schemas.ericsson.com/ma/CS/AIR/

12.1 Request Data

12.1.1 Parameters

MOId

Table 44 Set Accumulators MOId
Parameter	Type	Occurrence	Description
`subscriberNumber`	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by `subscriberNumberNAI` parameter.

MOAttributes

Table 45 covers the parameters that can be used in a setAccumulators request.

Table 45 Set Accumulators Parameter
Parameter		Type	Occurrence	Description
originNodeType		String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point
originHostName		String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
originTimeStamp		String: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation.
subscriberNumberNAI		Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
originOperatorID		String, 1- 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It can be used for security management or logging purposes for an example.
accumulatorUpdateInformation		Sub-MO	Mandatory	The updated information of the accumulator.
	accumulatorID	Integer, 1 - 2147483647	Mandatory	The identity of accumulator.
	accumulatorValueRelative	Integer, -2147483648 to 2147483647	Optional (0-1)	An accumulator value used for a relative update.
	accumulatorValueAbsolute	Integer, -2147483648 to 2147483647	Optional (0-1)	An accumulator value used for an absolute update.
	accumulatorStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Indicates the date on which the accumulator was last reset.
serviceClassCurrent		Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
negotiatedCapabilities		Interger, 0 - 2147483647	Optional (0-n)	Indicates the negotiated capabilities between the client and server node. The capabilities are presented as a series of elements, where each element contains an integer value between 0 and 2147483647. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active..

12.2 Response Data

12.2.1 Parameters

MOId

Table 46 Set Accumulators Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 47 covers the parameters that can be used in a setAccumulators response.

Table 47 Set Accumulators Parameter
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID	String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
originOperatorID	String, 1- 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It can be used for security management or logging purposes for an example.
negotiatedCapabilities	Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities	Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

12.3 Examples

This section gives an example of the setAccumulators request and response message. This example shows how to set Accumulators.

Request Example

Example 88 Set Accumulators Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>ffaaa4415eb249449a1a6f6827b7ca1e</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Accumulators@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setAccumulators subscriberNumber="465273152000001">
               <air:originNodeType>ADM</air:originNodeType>
               <air:originHostName>node1</air:originHostName>
               <air:originTransactionID>00000</air:originTransactionID>
               <air:originTimeStamp>2015-10-01T12:00:00+00:00</air:originTimeStamp>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:originOperatorID>user1</air:originOperatorID>
               <air:accumulatorUpdateInformation>
                  <air:accumulatorID>1</air:accumulatorID>
                  <air:accumulatorValueAbsolute>2147483647</air:accumulatorValueAbsolute>
                  <air:accumulatorStartDate>2015-10-01T12:00:00+00:00</air:accumulatorStartDate>
               </air:accumulatorUpdateInformation>
               <air:accumulatorUpdateInformation>
                  <air:accumulatorID>2</air:accumulatorID>
                  <air:accumulatorValueAbsolute>2147483647</air:accumulatorValueAbsolute>
                  <air:accumulatorStartDate>2015-11-01T12:00:00+00:00</air:accumulatorStartDate>
               </air:accumulatorUpdateInformation>
               <air:serviceClassCurrent>111</air:serviceClassCurrent>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setAccumulators>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 89 Set Accumulators Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>ffaaa4415eb249449a1a6f6827b7ca1e</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setAccumulatorsResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:subscriberNumber>465273152000001</air:subscriberNumber>
               <air:originTransactionID>00000</air:originTransactionID>
               <air:originOperatorID>user1</air:originOperatorID>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:setAccumulatorsResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

13 Delete Accumulators

This section covers the AIR command deleteAccumulators.

MOType

Accumulators@http://schemas.ericsson.com/ma/CS/AIR/

13.1 Request Data

13.1.1 Parameters

MOId

Table 48 Delete Accumulators MOId
Parameter	Type	Occurrence	Description
`subscriberNumber`	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by `subscriberNumberNAI` parameter.

MOAttributes

Table 49 covers the parameters that can be used in a deleteAccumulators request.

Table 49 Delete Accumulators Parameter
Parameter		Type	Occurrence	Description
originNodeType		String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point
originHostName		String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
originTimeStamp		String: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation.
subscriberNumberNAI		Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
originOperatorID		String, 1- 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It can be used for security management or logging purposes for an example.
serviceClassCurrent		Integer, 0 - 9999	Optional (0-1)	The service class currently used by the subscriber.
accumulatorIdentifier		Sub-MO	Mandatory	The identifier information of the accumulator.
	accumulatorID	Integer, 1 - 2147483647	Mandatory	The identity of accumulator.
	accumulatorEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Indicates the date on which the accumulator will be reset to the initial value again.
negotiatedCapabilities		Interger, 0 - 2147483647	Optional (0-n)	Indicates the negotiated capabilities between the client and server node. The capabilities are presented as a series of elements, where each element contains an integer value between 0 and 2147483647. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active..

13.2 Response Data

13.2.1 Parameters

MOId

Table 50 Delete Accumulators Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 51 covers the parameters that can be used in a deleteAccumulators response.

Table 51 Delete Accumulators Parameter
Parameter		Type	Occurrence	Description
subscriberNumber		String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
originOperatorID		String, 1- 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It can be used for security management or logging purposes for an example.
accumulatorInformation		Sub-MO	Mandatory	The list information of accumulator.
	accumulatorID	Integer, 1 - 2147483647	Mandatory	The identity of accumulator.
	accumulatorValue	Integer, -2147483648 to 2147483647	Mandatory	The value of accumulator.
	accumulatorStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Indicates the date on which the accumulator was last reset.
	accumulatorEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Indicates the date on which the accumulator will be reset to the initial value again.
negotiatedCapabilities		Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities		Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

13.3 Examples

This section gives an example of the deleteAccumulators request and response message. This example shows how to delete Accumulators.

Request Example

Example 90 Delete Accumulators Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SequenceId>12345</cai3:SequenceId>
      <cai3:TransactionId>12345</cai3:TransactionId>
      <cai3:SessionId>d3679e5e0af64a77804210816a7e1e70</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Delete>
         <cai3:MOType>Accumulators@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:deleteAccumulators subscriberNumber="465273152000001">
               <air:originNodeType>ADM</air:originNodeType>
               <air:originHostName>node1</air:originHostName>
               <air:originTransactionID>00000</air:originTransactionID>
               <air:originTimeStamp>2015-10-01T12:00:00+00:00</air:originTimeStamp>
               <air:subscriberNumberNAI>1</air:subscriberNumberNAI>
               <air:originOperatorID>user1</air:originOperatorID>
               <air:serviceClassCurrent>111</air:serviceClassCurrent>
               <air:accumulatorIdentifier>
                  <air:accumulatorID>1</air:accumulatorID>
                  <air:accumulatorEndDate>2030-10-01T12:00:00+00:00</air:accumulatorEndDate>
               </air:accumulatorIdentifier>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:deleteAccumulators>
         </cai3:MOAttributes>
      </cai3:Delete>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 91 Delete Accumulators Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>d3679e5e0af64a77804210816a7e1e70</cai3g:SessionId>
      <cai3g:TransactionId>12345</cai3g:TransactionId>
      <cai3g:SequenceId>12345</cai3g:SequenceId>
   </S:Header>
   <S:Body>
      <DeleteResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOId>
            <air:subscriberNumber xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
              465273152000001</air:subscriberNumber>
         </MOId>
         <MOAttributes>
            <deleteAccumulatorsResponse:deleteAccumulatorsResponse 
xmlns="http://schemas.ericsson.com/ma/CS/AIR/" 
xmlns:deleteAccumulatorsResponse="http://schemas.ericsson.com/ma/CS/AIR/">
               <subscriberNumber>465273152000001</subscriberNumber>
               <originTransactionID>14484215823058213847</originTransactionID>
               <originOperatorID>user1</originOperatorID>
               <accumulatorInformation>
                  <accumulatorID>1</accumulatorID>
                  <accumulatorValue>2147483647</accumulatorValue>
                  <accumulatorStartDate>2015-10-01T12:00:00+00:00</accumulatorStartDate>
                  <accumulatorEndDate>2021-10-31T12:00:00+00:00</accumulatorEndDate>
               </accumulatorInformation>
               <negotiatedCapabilities>0</negotiatedCapabilities>
               <availableServerCapabilities>809988676</availableServerCapabilities>
            </deleteAccumulatorsResponse:deleteAccumulatorsResponse>
         </MOAttributes>
      </DeleteResponse>
   </S:Body>
</S:Envelope>

14 Set AIR Run Periodic Account Management

This section covers the AIR subscriber command setRunPeriodicAccountManagement.

MOType

RunPeriodicAccountManagement@http://schemas.ericsson.com/ma/CS/AIR/

14.1 Request Data

14.1.1 Parameters

MOId

Table 52 Set Run Periodic Account Management Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 53 covers the parameters that can be used in a setRunPeriodicAccountManagement request.

Table 53 Set Run Periodic Account Management Parameters
Parameter	Type	Occurrence	Description
originNodeType	String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point
originHostName	String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type.
originTransactionID	String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	The Unique identifier for the transaction, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. An operation in this case is for example a refill.
originTimeStamp	String: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation.
subscriberNumberNAI	Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
originOperatorID	String, 1- 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It can be used for security management or logging purposes for an example.
pamServiceID	Integer, 0 - 99	Mandatory	The id of the periodic account management service.
pamIndicator	Integer, 0 - 65535	Optional (0-1)	This parameter is used for differentiation in the periodic account management structure when executing a periodic account management evaluation.
negotiatedCapabilities	Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.

14.2 Response Data

14.2.1 Parameters

MOId

Table 54 Set Run Periodic Account Management Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 55 covers the parameters that can be used in a setRunPeriodicAccountManagement response.

Table 55 Set Run Periodic Account Management Parameters
Parameter		Type	Occurrence	Description
subscriberNumber		String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits	Mandatory	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originOperatorID		String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example.
pamInformation		SubMo	Mandatory	Information used for periodic account management.
	pamServiceID	Integer, 0 - 99	Mandatory	The id of the periodic account management service.
	pamClassID	Integer, 0 - 9999	Mandatory	The periodic account management class used by the periodic account management service.
	scheduleID	Integer, 0 - 9999	Mandatory	The schedule that is used by the periodic account management service.
	currentPamPeriod	String, 1 - 30 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Mandatory	Periodic account management period that is currently used for the subscriber.
	deferredToDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The deferred to date for the Periodic Account Management service.
	lastEvaluationDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Date of the last periodic account management evaluation.
	pamServicePriority	Integer, 0 - 65535	Optional (0-1)	Indicate the priority between PAM services at PAM evaluation. Lower value gives higher priority.
negotiatedCapabilities		Interger, 0 - 2147483647	Optional (0-n)	Indicates the negotiated capabilities between the client and server node. The capabilities are presented as a series of elements, where each element contains an integer value between 0 and 2147483647. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities		Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

14.3 Examples

This section gives an example of the setRunPeriodicAccountManagement request and response message. This example shows how to set Run Periodic Account Management.

Request Example

Example 92 Set Run Periodic Account Management Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>12b27d765da5490b87a864dbb9a5a7fd</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>CommunicationID@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000010</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:setCommunicationID subscriberNumber="465273152000010">
               <air:imsiCurrent>46001111222</air:imsiCurrent>
               <air:imsiNew>46001111223</air:imsiNew>
               <air:externalContract>1</air:externalContract>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
            </air:setCommunicationID>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 93 Set Run Periodic Account Management Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>12b27d765da5490b87a864dbb9a5a7fd</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:setCommunicationIDResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:originTransactionID>1442804667204430352</air:originTransactionID>
               <air:cleanupDate>2015-12-20T12:00:00+00:00</air:cleanupDate>
               <air:negotiatedCapabilities>0</air:negotiatedCapabilities>
               <air:availableServerCapabilities>805646852</air:availableServerCapabilities>
            </air:setCommunicationIDResponse>
         </MOAttributes>
      </SetResponse>
   </S:Body>
</S:Envelope>

15 Get AIR Capabilities

This section covers the AIR subscriber command getCapabilites.

MOType

Capabilites@http://schemas.ericsson.com/ma/CS/AIR/

15.1 Request Data

15.1.1 Parameters

MOId

Table 56 Get Capabilities Parameters
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

15.2 Response Data

15.2.1 Parameters

MOAttributes

Table 57 covers the parameters that can be used in a getCapabilites response.

Table 57 Get Capabilities Parameters
Parameter					Type	Occurrence	Description
availableServerCapabilities					Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

15.3 Examples

This section gives an example of the getCapabilites request and response message. This example shows how to get Capabilities.

Request Example

Example 94 Get Capabilities Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
   <soapenv:Header>
      <cai3:SessionId>a4573228f4124562bf58b6624565607d</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Capabilities@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
         <cai3:MOId>
            <air:subscriberNumber>465273152000001</air:subscriberNumber>
         </cai3:MOId>
         <cai3:MOAttributes>
            <air:getCapabilities subscriberNumber="465273152000001"/>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 95 Get Capabilities Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>a4573228f4124562bf58b6624565607d</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <air:getCapabilitiesResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
               <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
            </air:getCapabilitiesResponse>
         </MOAttributes>
      </GetResponse>
   </S:Body>
</S:Envelope>

16 Create AF Subscription

This section covers the AF command createSubscription .

MOType

Subscription@http://schemas.ericsson.com/ma/CS/AF/

16.1 Request Data

16.1.1 Parameters

MOId

Table 58 Create Subscription MOId
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier

MOAttributes

Table 59 covers the parameters that can be used in a createSubscription request.

Table 59 Create Subscription Parameters
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier
ttl	Integer	Optional (0-1)	Time To Live
sdpHostName	String Format : `hostname.domainname`	Mandatory	SDP hostname
prerequisite	Boolean, {true, false}	Optional (0-1)	When it is set to TRUE in the Create operation, it means the MSISDNs are not to be defined in AF, otherwise error is returned. When set to FALSE, it means that this request is to be forced to execute no matter MSISDNs exists or not.

16.2 Examples

This section gives an example of the createSubscription request and response message. This example shows how to create a Subscription.

Request Example

Example 96 Create Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:af="http://schemas.ericsson.com/ma/CS/AF/">
   <soapenv:Header>
      <cai3:SessionId>afe520a0a77e4f47b419bb0555665c11</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Create>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AF/</cai3:MOType>
         <cai3:MOId>
            <af:msisdn>465273152000995</af:msisdn>
         </cai3:MOId>
         <cai3:MOAttributes>
            <af:createSubscription msisdn="465273152000995">
               <af:msisdn>465273152000995</af:msisdn>
               <af:ttl>2147483647</af:ttl>
               <af:sdpHostName>vmx2118x2119-vip</af:sdpHostName>
               <af:prerequisite>1</af:prerequisite>
            </af:createSubscription>
         </cai3:MOAttributes>
      </cai3:Create>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 97 Create Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>afe520a0a77e4f47b419bb0555665c11</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <CreateResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOId>
            <af:msisdn xmlns:af="http://schemas.ericsson.com/ma/CS/AF/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">465273152000995</af:msisdn>
         </MOId>
      </CreateResponse>
   </S:Body>
</S:Envelope>

17 Set AF Subscription

This section covers the AF command setSubscription.

MOType

Subscription@http://schemas.ericsson.com/ma/CS/AF/

17.1 Request Data

17.1.1 Parameters

MOId

Table 60 Set Subscription MOId
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier

MOAttributes

Table 61 covers the parameters that can be used in a setSubscription request.

Table 61 Set Subscription Parameters
Parameter	Type	Occurrence	Description
ttl	Integer	Optional (0-1)	Time To Live
sdpHostName	String Format : `hostname.domainname`	Mandatory	SDP hostname
prerequisite	Boolean, {true, false}	Optional (0-1)	When it is set to TRUE in the Create operation, it means the MSISDNs are not to be defined in AF, otherwise error is returned. When set to FALSE, it means that this request is to be forced to execute no matter MSISDNs exists or not.

17.2 Examples

This section gives an example of the setSubscription request and response message. This example shows how to set a Subscription.

Request Example

Example 98 Set Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:af="http://schemas.ericsson.com/ma/CS/AF/">
   <soapenv:Header>
      <cai3:SessionId>96904b47ed2342aab5a59695b10d9677</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AF/</cai3:MOType>
         <cai3:MOId>
            <af:msisdn>465273152000995</af:msisdn>
         </cai3:MOId>
         <cai3:MOAttributes>
            <af:setSubscription msisdn="465273152000995">
               <af:ttl>0</af:ttl>
               <af:sdpHostName>vmx2118x2119-vip</af:sdpHostName>
               <af:prerequisite>1</af:prerequisite>
            </af:setSubscription>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 99 Set Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>96904b47ed2342aab5a59695b10d9677</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/"/>
   </S:Body>
</S:Envelope>

18 Get AF Subscription

This section covers the AF command getSubscription.

MOType

Subscription@http://schemas.ericsson.com/ma/CS/AF/

18.1 Request Data

18.1.1 Parameters

MOId

Table 62 Get Subscription MOId
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier

18.2 Response Data

18.2.1 Parameters

MOAttributes

Table 63 covers the parameters that can be used in a getSubscription response.

Table 63 Get Subscription Parameters
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier
class	String	Mandatory	Class identifier
ttl	Integer	Mandatory	Time To Live
sdpHostName	String Format : `hostname.domainname`	Mandatory	SDP hostname
sdpIP	String	Mandatory	The IP address of SDP node

18.3 Examples

This section gives an example of the getSubscription request and response message. This example shows how to get a Subscription.

Request Example

Example 100 Get Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:af="http://schemas.ericsson.com/ma/CS/AF/">
   <soapenv:Header>
      <cai3:SessionId>96904b47ed2342aab5a59695b10d9677</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AF/</cai3:MOType>
         <cai3:MOId>
            <af:msisdn>465273152000995</af:msisdn>
         </cai3:MOId>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 101 Get Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>96904b47ed2342aab5a59695b10d9677</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOAttributes>
            <af:getSubscriptionResponse xmlns:af="http://schemas.ericsson.com/ma/CS/AF/">
               <af:msisdn>465273152000995</af:msisdn>
               <af:class>IN</af:class>
               <af:ttl>2147483647</af:ttl>
               <af:sdpHostName>vmx2118x2119-vip.cs.</af:sdpHostName>
               <af:sdpIP>10.61.14.128</af:sdpIP>
            </af:getSubscriptionResponse>
         </MOAttributes>
      </GetResponse>
   </S:Body>
</S:Envelope>

19 Delete AF Subscription

This section covers the AF command deleteSubscription.

MOType

Subscription@http://schemas.ericsson.com/ma/CS/AF/

19.1 Request Data

19.1.1 Parameters

MOId

Table 64 Delete Subscription MOId
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier

19.2 Examples

This section gives an example of the deleteSubscription request and response message. This example shows how to delete a Subscription.

Request Example

Example 102 Delete Subscription Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:af="http://schemas.ericsson.com/ma/CS/AF/">
   <soapenv:Header>
      <cai3:SessionId>96904b47ed2342aab5a59695b10d9677</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Delete>
         <cai3:MOType>Subscription@http://schemas.ericsson.com/ma/CS/AF/</cai3:MOType>
         <cai3:MOId>
            <af:msisdn>465273152000995</af:msisdn>
         </cai3:MOId>
      </cai3:Delete>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 103 Delete Subscription Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>96904b47ed2342aab5a59695b10d9677</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <DeleteResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOId>
            <af:msisdn xmlns:af="http://schemas.ericsson.com/ma/CS/AF/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">465273152000995</af:msisdn>
         </MOId>
      </DeleteResponse>
   </S:Body>
</S:Envelope>

20 Create AF Identifier

This section covers the AF command createIdentifier .

MOType

Identifier@http://schemas.ericsson.com/ma/CS/AF/

20.1 Request Data

20.1.1 Parameters

MOId

Table 65 Create Identifier MOId
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier
identifier	String, 1 - 28 digits	Mandatory	The identifier pointing to an MSISDN.

MOAttributes

Table 66 covers the parameters that can be used in a createIdentifier request.

Table 66 Create Identifier Parameters
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier
identifier	String, 1 - 28 digits	Mandatory	The identifier pointing to an MSISDN.
type	String Enumeration value="NAI" Enumeration value="IMSI" Enumeration value="SIP-URI" Enumeration value="PRIVATE"	Mandatory	The type of the identifier
ttl	Integer	Optional (0-1)	Time To Live
prerequisite	Boolean, {true, false}	Optional (0-1)	When it is set to TRUE in the Create operation, it means the MSISDNs are not to be defined in AF, otherwise error is returned. When set to FALSE, it means that this request is to be forced to execute no matter MSISDNs exists or not.

20.2 Examples

This section gives an example of the createIdentifier request and response message. This example shows how to create an identifier.

Request Example

Example 104 Create Identifier Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:af="http://schemas.ericsson.com/ma/CS/AF/">
   <soapenv:Header>
      <cai3:SessionId>8e883666b30541d2954e563e96b32123</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Create>
         <cai3:MOType>Identifier@http://schemas.ericsson.com/ma/CS/AF/</cai3:MOType>
         <cai3:MOId>
            <af:msisdn>465273152000111</af:msisdn>
            <af:identifier>naifoobar201@ericsson.com</af:identifier>
         </cai3:MOId>
         <cai3:MOAttributes>
            <af:createIdentifier msisdn="465273152000111" identifier="naifoobar201@ericsson.com">
               <af:msisdn>465273152000111</af:msisdn>
               <af:identifier>naifoobar201@ericsson.com</af:identifier>
               <af:type>nai</af:type>
               <af:ttl>201</af:ttl>
               <af:prerequisite>1</af:prerequisite>
            </af:createIdentifier>
         </cai3:MOAttributes>
      </cai3:Create>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 105 Create Identifier Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>8e883666b30541d2954e563e96b32123</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <CreateResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOId>
            <af:msisdn xmlns:af="http://schemas.ericsson.com/ma/CS/AF/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">465273152000111</af:msisdn>
            <af:identifier xmlns:af="http://schemas.ericsson.com/ma/CS/AF/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">naifoobar201@ericsson.com</af:identifier>
         </MOId>
      </CreateResponse>
   </S:Body>
</S:Envelope>

21 Set AF Identifier

This section covers the AF command setIdentifier.

MOType

Identifier@http://schemas.ericsson.com/ma/CS/AF/

21.1 Request Data

21.1.1 Parameters

MOId

Table 67 Set Identifier MOId
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier
identifier	String, 1 - 28 digits	Mandatory	The identifier pointing to an MSISDN.

MOAttributes

Table 68 covers the parameters that can be used in a setIdentifier request.

Table 68 Set Identifier Parameters
Parameter	Type	Occurrence	Description
type	String Enumeration value="NAI" Enumeration value="IMSI" Enumeration value="SIP-URI" Enumeration value="PRIVATE"	Mandatory	The type of the identifier
ttl	Integer	Optional (0-1)	Time To Live
prerequisite	Boolean, {true, false}	Optional (0-1)	When it is set to TRUE in the Create operation, it means the MSISDNs are not to be defined in AF, otherwise error is returned. When set to FALSE, it means that this request is to be forced to execute no matter MSISDNs exists or not.

21.2 Examples

This section gives an example of the setIdentifier request and response message. This example shows how to set an identifier.

Request Example

This section gives an example of a setIdentifier request message, as shown in xxx.

Example 106 Set Identifier Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:af="http://schemas.ericsson.com/ma/CS/AF/">
   <soapenv:Header>
      <cai3:SessionId>8e883666b30541d2954e563e96b32123</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Set>
         <cai3:MOType>Identifier@http://schemas.ericsson.com/ma/CS/AF/</cai3:MOType>
         <cai3:MOId>
            <af:msisdn>465273152000111</af:msisdn>
            <af:identifier>naifoobar200@ericsson.com</af:identifier>
         </cai3:MOId>
         <cai3:MOAttributes>
            <af:setIdentifier msisdn="465273152000111" identifier="naifoobar200@ericsson.com">
               <af:type>nai</af:type>
               <af:ttl>200</af:ttl>
               <af:prerequisite>1</af:prerequisite>
            </af:setIdentifier>
         </cai3:MOAttributes>
      </cai3:Set>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 107 Set Identifier Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>8e883666b30541d2954e563e96b32123</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/"/>
   </S:Body>
</S:Envelope>

22 Get AF Identifier

This section covers the command getIdentifier.

MOType

Identifier@http://schemas.ericsson.com/ma/CS/AF/

22.1 Request Data

22.1.1 Parameters

MOId

Table 69 Get Identifier MOId
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier
identifier	String, 1 - 28 digits	Mandatory	The identifier pointing to an MSISDN.

MOAttributes

Table 70 covers the parameters that can be used in a getIdentifier request.

Table 70 Get Identifier Parameters
Parameter	Type	Occurrence	Description
type	String Enumeration value="NAI" Enumeration value="IMSI" Enumeration value="SIP-URI" Enumeration value="PRIVATE"	Mandatory	The type of the identifier

22.2 Response Data

22.2.1 Parameters

MOAttributes

Table 71 covers the parameters that can be used in a getIdentifier response.

Table 71 Get Identifier Parameters
Parameter	Type	Occurrence	Description
identifier	String, 1 - 28 digits	Mandatory	The identifier pointing to an MSISDN.
type	String Enumeration value="NAI" Enumeration value="IMSI" Enumeration value="SIP-URI" Enumeration value="PRIVATE"	Mandatory	The type of the identifier
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier
class	String	Mandatory	Class identifier
ttl	Integer	Mandatory	Time To Live
sdpHostName	String Format : `hostname.domainname`	Mandatory	SDP hostname
sdpIP	String	Mandatory	The IP address of SDP node

22.3 Examples

This section gives an example of the getIdentifier request and response message. This example shows how to get an identifier.

Request Example

Example 108 Get Identifier Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:af="http://schemas.ericsson.com/ma/CS/AF/">
   <soapenv:Header>
      <cai3:SessionId>8e883666b30541d2954e563e96b32123</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Identifier@http://schemas.ericsson.com/ma/CS/AF/</cai3:MOType>
         <cai3:MOId>
            <af:msisdn>465273152000111</af:msisdn>
            <af:identifier>naifoobar200@ericsson.com</af:identifier>
         </cai3:MOId>
         <cai3:MOAttributes>
            <af:getIdentifier msisdn="465273152000111" identifier="naifoobar200@ericsson.com">
               <af:type>nai</af:type>
            </af:getIdentifier>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 109 Get Identifier Response Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:af="http://schemas.ericsson.com/ma/CS/AF/">
   <soapenv:Header>
      <cai3:SessionId>8e883666b30541d2954e563e96b32123</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Get>
         <cai3:MOType>Identifier@http://schemas.ericsson.com/ma/CS/AF/</cai3:MOType>
         <cai3:MOId>
            <af:msisdn>465273152000111</af:msisdn>
            <af:identifier>naifoobar200@ericsson.com</af:identifier>
         </cai3:MOId>
         <cai3:MOAttributes>
            <af:getIdentifier msisdn="465273152000111" identifier="naifoobar200@ericsson.com">
               <af:type>nai</af:type>
            </af:getIdentifier>
         </cai3:MOAttributes>
      </cai3:Get>
   </soapenv:Body>
</soapenv:Envelope>

23 Delete AF Identifier

This section covers the AF command deleteIdentifier.

MOType

Subscription@http://schemas.ericsson.com/ma/CS/AF/

23.1 Request Data

23.1.1 Parameters

MOId

Table 72 Delete Identifier MOId
Parameter	Type	Occurrence	Description
msisdn	String, 1 - 28 digits A single number. For example, 13999292921 Several numbers separated by comma. For example, 13999292921, 13999292925, 13999292930 A number range. For example, 13999292921- 13999292971	Mandatory	Subscriber identifier
identifier	String, 1 - 28 digits	Mandatory	The identifier pointing to an MSISDN.

MOAttributes

Table 73 covers the parameters that can be used in a deleteIdentifier request.

Table 73 Delete Identifier Parameters
Parameter	Type	Occurrence	Description
type	String Enumeration value="NAI" Enumeration value="IMSI" Enumeration value="SIP-URI" Enumeration value="PRIVATE"	Mandatory	The type of the identifier

23.2 Examples

This section gives an example of the deleteIdentifier request and response message. This example shows how to delete an identifier.

Request Example

Example 110 Delete Identifier Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" xmlns:af="http://schemas.ericsson.com/ma/CS/AF/">
   <soapenv:Header>
      <cai3:SessionId>8e883666b30541d2954e563e96b32123</cai3:SessionId>
   </soapenv:Header>
   <soapenv:Body>
      <cai3:Delete>
         <cai3:MOType>Identifier@http://schemas.ericsson.com/ma/CS/AF/</cai3:MOType>
         <cai3:MOId>
            <af:msisdn>465273152000111</af:msisdn>
            <af:identifier>naifoobar200@ericsson.com</af:identifier>
         </cai3:MOId>
         <cai3:MOAttributes>
            <af:deleteIdentifier msisdn="465273152000111" identifier="naifoobar200@ericsson.com">
               <af:type>nai</af:type>
            </af:deleteIdentifier>
         </cai3:MOAttributes>
      </cai3:Delete>
   </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 111 Delete Identifier Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>8e883666b30541d2954e563e96b32123</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <DeleteResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
         <MOId>
            <af:msisdn xmlns:af="http://schemas.ericsson.com/ma/CS/AF/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
             465273152000111</af:msisdn>
            <af:identifier xmlns:af="http://schemas.ericsson.com/ma/CS/AF/" 
xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
             naifoobar200@ericsson.com</af:identifier>
         </MOId>
      </DeleteResponse>
   </S:Body>
</S:Envelope>

24 Set PredefinedOffer

This section covers the AIR command setPredefinedOffer .

MOType

PredefinedOffer@http://schemas.ericsson.com/ma/CS/AIR/

24.1 Request Data

24.1.1 Parameters

MOId

Table 74 Set PredefinedOffer MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
offerID	Integer, 0 - 2147483647	Mandatory	The identity of an offer.

MOAttributes

Table 75 covers the parameters that can be used in a setPredefinedOffer request.

Table 75 Set PredefinedOffer Parameters
Parameter				Type	Occurrence	Description
originNodeType				String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName				String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID				String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originTimeStamp				DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation. If this parameter is absent from the request, Dynamic Activation will generate system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic
subscriberNumberNAI				Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
originOperatorID				String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate the default "operator" or the configured `OriginOperatorId` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic configure.
attributeUpdateInformation				Sub-MO	Optional (0-n)	Update information of the attribute
	attributeName			String, 1 - 128 characters	Mandatory	The name of the attribute.
	attributeUpdateAction			String Enumeration value="ADD" Enumeration value="DELETE" Enumeration value="CLEAR" Enumeration value="SET"	Mandatory	The requested action for an attribute. ADD : Add an entry to the set (for attributes storing a set of values). DELETE : Delete an entry from the set (for attributes storing a set of values). CLEAR :Clear all entries from the set (for attributes storing a set of values) or removes the value for a single value attribute. SET :Sets the value for a single value attribute. Previous value, if existing, will be overwritten.
	attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
	attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
	attributeValueDecimal			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
		attributeValueNumber		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
		numberOfDecimals		Sub-MO	Optional (0-1)	Information about a decimal value.
	attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute
treeParameterSetUpdateInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names.
	serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
	treeParameterUpdateInformation			Sub-MO	Optional (0-n)	Contains information about the changes made to a treeParameter.
		treeParameterName		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Mandatory	Contains the name of the tree parameter.
		treeParameterUpdateAction		String Enumeration value="ADD" Enumeration value="DELETE" Enumeration value="CLEAR" Enumeration value="SET"	Mandatory	Contains the requested action for a tree parameter. ADD: Adds an entry to the set (for tree parameters storing a set of values). DELETE: Deletes an entry from the set (for tree parameters storing a set of values). CLEAR: Clears all entries from the set (for tree parameters storing a set of values) or removes the value for a single value tree parameter. SET: Sets the value for a single value tree parameter. Previous value, if existing, will be overwritten.
		treeParameterValueString		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
		treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
		treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
			attributeValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals	Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
		treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
		treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
		treeParameterValueDateRange		Sub-MO	Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
			treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
			treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
		treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
		treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
			scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
			scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
			scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
			scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
			scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
			scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
			scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
			scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
		associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
negotiatedCapabilities				Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.

24.2 Response Data

24.2.1 Parameters

MOId

Table 76 Set PredefinedOffer MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 77 covers the parameters that can be used in a setPredefinedOffer response.

Table 77 Set PredefinedOffer Response
Parameter				Type	Occurrence	Description
subscriberNumber				String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID				String, 0 - 9999 9999 9999 9999 9999 digits	Optional (0-1)	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originOperatorID				String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate the default "operator" or the configured `OriginOperatorId` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic configuration.
offerID				Integer, 0 - 2147483647	Mandatory	The identity of an offer.
negotiatedCapabilities				Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities				Integer, 0 - 2147483647	Optional (0-n)	Indicates the available capabilities on the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.
attributeInformation				Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
	attributeName			String, 1 - 128 characters	Mandatory	The name of the attribute.
	attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
	attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
	attributeValueDecimal				Optional (0-1)	Information about a decimal value.
		attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
		numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
	attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute
	attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contain the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
	serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
	treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about the changes made to a treeParameter.
		treeParameterName		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
		treeParameterValueString		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
		treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
		treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
			treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	Contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals	Integer, 0 - 15	Mandatory	Contains information about where to put the decimal sign counted in positions from the right and forms together with attributeValueNumber a decimal number.
		treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
		treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
			scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
			scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
			scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
			scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
			scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
			scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
			scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
			scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
		treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
		treeParameterValueDateRange		Sub-MO	Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
			treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
			treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
		treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
		treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
		associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.

24.3 Examples

This section gives an example of the setPredefinedOffer request and response message. This example shows how to set an AIR PredefinedOffer.

Request Example

Example 112 Set PredefinedOffer Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/"
 xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/">
  <soapenv:Header>
    <cai3:SessionId>86e7024622bd4af8bbd57a716dd72cbc</cai3:SessionId>
  </soapenv:Header>
  <soapenv:Body>
    <cai3:Set>
      <cai3:MOType>PredefinedOffer@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
      <cai3:MOId>
        <air:subscriberNumber>55897213</air:subscriberNumber>
        <air:offerID>513</air:offerID>
      </cai3:MOId>
      <cai3:MOAttributes>
        <air:setPredefinedOffer offerID="513" subscriberNumber="55897213">
          <air:originNodeType>ADM</air:originNodeType>
          <air:originHostName>AIR</air:originHostName>
          <air:originTransactionID>14428155633403480337</air:originTransactionID>
          <air:originTimeStamp>2017-10-08T12:00:00+00:00</air:originTimeStamp>
          <air:originOperatorID>egumeng</air:originOperatorID>
          <air:attributeUpdateInformation>
            <air:attributeName>LOS</air:attributeName>
            <air:attributeUpdateAction>ADD</air:attributeUpdateAction>
            <air:attributeValueString>VauleParameter1</air:attributeValueString>
          </air:attributeUpdateInformation>
          <air:attributeUpdateInformation>
            <air:attributeName>TemplateVersion</air:attributeName>
            <air:attributeUpdateAction>SET</air:attributeUpdateAction>
            <air:attributeValueString>ChangeDefault</air:attributeValueString>
          </air:attributeUpdateInformation>
          <air:attributeUpdateInformation>
            <air:attributeName>parent_offer</air:attributeName>
            <air:attributeUpdateAction>SET</air:attributeUpdateAction>
            <air:attributeValueInteger>1009</air:attributeValueInteger>
          </air:attributeUpdateInformation>
          <air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
          <air:negotiatedCapabilities>16296</air:negotiatedCapabilities>
        </air:setPredefinedOffer>
      </cai3:MOAttributes>
    </cai3:Set>
  </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 113 Set PredefinedOffer Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
  <S:Header>
    <cai3g:SessionId>86e7024622bd4af8bbd57a716dd72cbc</cai3g:SessionId>
  </S:Header>
  <S:Body>
    <SetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
      <MOAttributes>
        <air:setPredefinedOfferResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
          <air:subscriberNumber>55897213</air:subscriberNumber>
          <air:originTransactionID>14428155633403480337</air:originTransactionID>
          <air:originOperatorID>egumeng</air:originOperatorID>
          <air:offerID>513</air:offerID>
          <air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
          <air:negotiatedCapabilities>16296</air:negotiatedCapabilities>
          <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
          <air:availableServerCapabilities>16296</air:availableServerCapabilities>
          <air:attributeInformation>
            <air:attributeName>LOS</air:attributeName>
            <air:attributeValueString>VauleParameter1</air:attributeValueString>
          </air:attributeInformation>
          <air:attributeInformation>
            <air:attributeName>TemplateVersion</air:attributeName>
            <air:attributeValueString>ChangeDefault</air:attributeValueString>
          </air:attributeInformation>
          <air:attributeInformation>
            <air:attributeName>parent_offer</air:attributeName>
            <air:attributeValueInteger>1009</air:attributeValueInteger>
          </air:attributeInformation>
          <air:treeParameterSetInformation>
            <air:serviceProvider>3</air:serviceProvider>
            <air:treeParameterInformation>
              <air:treeParameterName>OfferType</air:treeParameterName>
              <air:treeParameterValueString>Sunday</air:treeParameterValueString>
            </air:treeParameterInformation>
          </air:treeParameterSetInformation>
          <air:treeParameterSetInformation>
            <air:serviceProvider>4</air:serviceProvider>
            <air:treeParameterInformation>
              <air:treeParameterName>Offer_fee_once</air:treeParameterName>
              <air:treeParameterValueDecimal>
                <air:treeParameterValueNumber>41</air:treeParameterValueNumber>
                <air:numberOfDecimals>1</air:numberOfDecimals>
              </air:treeParameterValueDecimal>
            </air:treeParameterInformation>
            <air:treeParameterInformation>
              <air:treeParameterName>Offer_fee</air:treeParameterName>
              <air:treeParameterValueInteger>1009</air:treeParameterValueInteger>
            </air:treeParameterInformation>
          </air:treeParameterSetInformation>
          <air:productOfferingName>Test_EDA</air:productOfferingName>
        </air:setPredefinedOfferResponse>
      </MOAttributes>
    </SetResponse>
  </S:Body>

25 Get PredefinedOffer

This section covers the AIR command getPredefinedOffer .

MOType

PredefinedOffer@http://schemas.ericsson.com/ma/CS/AIR/

25.1 Request Data

25.1.1 Parameters

MOId

Table 78 Get PredefinedOffer MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.

MOAttributes

Table 79 covers the parameters that can be used in a getPredefinedOffer request.

Table 79 Get PredefinedOffer Parameters
Parameter		Type	Occurrence	Description
originNodeType		String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Mandatory	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName		String,1 - 255 characters	Mandatory	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID		String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Mandatory	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originTimeStamp		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	The date and time of sending the request by the entity that initiated the operation. If this parameter is absent from the request, Dynamic Activation will generate system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic
subscriberNumberNAI		Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
offerSelection		Sub-MO	Optional (0-n)	Used to define offer identifiers to retrieve.
	offerIDFirst	Integer, 1 - 2147483647	Mandatory	The identity of the first offer in a sequence of offers, or the only offer identity if a single offer shall be obtained.
	offerIDLast	Integer, 1 - 2147483647	Optional (0-1)	The identity of the last offer in a sequence of offers, or the only offer identity if a single offer shall be obtained.
negotiatedCapabilities		Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.

25.2 Response Data

25.2.1 Parameters

MOAttributes

Table 80 covers the parameters that can be used in a getPredefinedOffer response.

Table 80 Get PredefinedOffer Parameters
Parameter					Type	Occurrence	Description
subscriberNumber					String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID					String, 0 - 9999 9999 9999 9999 9999 digits	Mandatory	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
predefinedOfferValuesInformation					Sub-MO	Optional (0-n)	Contains all predefined offer values assigned to each offer.
	offerID				Integer, 0 - 2147483647	Optional (0-1)	The identity of an offer.
	attributeInformation				Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
		attributeName			String, 1 - 128 characters	Mandatory	The name of the attribute.
		attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Optional (0-1)	The string value of an attribute.
		attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date value of an attribute. DateMin to DateMax or DateInfinite
		attributeValueDecimal				Optional (0-1)	Information about a decimal value.
			attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
			attributeValueInteger		Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute
		attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contain the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
	treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
		serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
		treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about the changes made to a treeParameter.
			treeParameterName		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
			treeParameterValueString		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
			treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
			treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
				treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	Contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
				numberOfDecimals	Integer, 0 - 15	Mandatory	Contains information about where to put the decimal sign counted in positions from the right and forms together with attributeValueNumber a decimal number.
			treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
			treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
				scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
				scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
				scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
				scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
				scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
				scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
				scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
				scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
			treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
			treeParameterValueDateRange			Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
				treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
				treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
			treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
			treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
			associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
	productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
negotiatedCapabilities					Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities					Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

25.3 Examples

This section gives an example of the getPredefinedOffer request and response message. This example shows how to get an AIR PredefinedOffer.

Request Example

Example 114 Get PredefinedOffer Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/"
 xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/">
  <soapenv:Header>
    <cai3:SessionId>86e7024622bd4af8bbd57a716dd72cbc</cai3:SessionId>
  </soapenv:Header>
  <soapenv:Body>
    <cai3:Get>
      <cai3:MOType>PredefinedOffer@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
      <cai3:MOId>
        <air:subscriberNumber>55897213</air:subscriberNumber>
      </cai3:MOId>
      <cai3:MOAttributes>
        <air:getPredefinedOffer subscriberNumber="55897213">
          <air:originNodeType>ADM</air:originNodeType>
          <air:originHostName>AIR</air:originHostName>
          <air:originTransactionID>14428155633403480337</air:originTransactionID>
          <air:originTimeStamp>2017-10-08T12:00:00+00:00</air:originTimeStamp>
          <air:offerSelection>
            <air:offerIDFirst>513</air:offerIDFirst>
            <air:offerIDLast>514</air:offerIDLast>
          </air:offerSelection>
          <air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
          <air:negotiatedCapabilities>16296</air:negotiatedCapabilities>
        </air:getPredefinedOffer>
      </cai3:MOAttributes>
    </cai3:Get>
  </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 115 Get PredefinedOffer Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
  <S:Header>
    <cai3g:SessionId>86e7024622bd4af8bbd57a716dd72cbc</cai3g:SessionId>
  </S:Header>
  <S:Body>
    <GetResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
      <MOAttributes>
        <air:getPredefinedOfferResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
          <air:subscriberNumber>55897213</air:subscriberNumber>
          <air:originTransactionID>14428155633403480337</air:originTransactionID>
          <air:predefinedOfferValuesInformation>
            <air:offerID>513</air:offerID>
            <air:treeParameterSetInformation>
              <air:serviceProvider>3</air:serviceProvider>
              <air:treeParameterInformation>
                <air:treeParameterName>OfferType</air:treeParameterName>
                <air:treeParameterValueString>Sunday</air:treeParameterValueString>
              </air:treeParameterInformation>
            </air:treeParameterSetInformation>
            <air:treeParameterSetInformation>
              <air:serviceProvider>4</air:serviceProvider>
              <air:treeParameterInformation>
                <air:treeParameterName>Offer_fee_once</air:treeParameterName>
                <air:treeParameterValueDecimal>
                  <air:treeParameterValueNumber>41</air:treeParameterValueNumber>
                  <air:numberOfDecimals>1</air:numberOfDecimals>
                </air:treeParameterValueDecimal>
              </air:treeParameterInformation>
              <air:treeParameterInformation>
                <air:treeParameterName>Offer_fee</air:treeParameterName>
                <air:treeParameterValueInteger>1009</air:treeParameterValueInteger>
              </air:treeParameterInformation>
            </air:treeParameterSetInformation>
            <air:productOfferingName>Test_EDA</air:productOfferingName>
          </air:predefinedOfferValuesInformation>
          <air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
          <air:negotiatedCapabilities>16296</air:negotiatedCapabilities>
          <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
          <air:availableServerCapabilities>16296</air:availableServerCapabilities>
        </air:getPredefinedOfferResponse>
      </MOAttributes>
    </GetResponse>
  </S:Body>
</S:Envelope>

26 Delete PredefinedOffer

This section covers the AIR command deletePredefinedOffer .

MOType

PredefinedOffer@http://schemas.ericsson.com/ma/CS/AIR/

26.1 Request Data

26.1.1 Parameters

MOId

Table 81 Delete PredefinedOffer MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
offerID	Integer, 0 - 2147483647	Mandatory	The identity of an offer.

MOAttributes

Table 82 covers the parameters that can be used in a deletePredefinedOffer request.

Table 82 Delete PredefinedOffer Parameters
Parameter	Type	Occurrence	Description
originNodeType	String Enumeration value="EXT" Enumeration value="AIR" Enumeration value="ADM" Enumeration value="UGW" Enumeration value="IVR" Enumeration value="OGW" Enumeration value="SDP"	Optional (0-1)	The parameter contains the origin node type that is set by AIR or provided by an external network element. It contains the type of the logical node from where the operation originated. External network elements are not allowed to use the reserved names on network element types, (except EXT). Network Element Type: EXT:External system AIR:Account information and refill ADM:Administrative system UGW: USSD gateway IVR :Interactive voice response system OGW: On-line gateway SDP: Service data point If this parameter is absent from the request, Dynamic Activation will generate “ADM” as the parameter to NEs.
originHostName	String,1 - 255 characters	Optional (0-1)	The identifier string for the host where the operation originated from. The host name shall be unique within the network for a given network element type. If this parameter is absent from the request, Dynamic Activation will generate a node name, which the character "-" replaced by "" as the parameter to NEs.
originTransactionID	String, 0 - 9999 9999 9999 9999 9999 digits Each digit is 0-9	Optional (0-1)	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originTimeStamp	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	The date and time of sending the request by the entity that initiated the operation. If this parameter is absent from the request, Dynamic Activation will generate system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic
subscriberNumberNAI	Integer, 0 - 2 0 = National number (with prefix) 1 = International number 2 = National significant number (without prefix)	Optional (0-1)	The Nature of Address Indicator identifies the format of the subscriberNumber parameter.
originOperatorID	String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate PGN system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic
negotiatedCapabilities	Integer, 0 - 2147483647	Mandatory	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.

26.2 Response Data

26.2.1 Parameters

MOId

Table 83 Delete PredefinedOffer MOId
Parameter	Type	Occurrence	Description
subscriberNumber	String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
offerID	Integer, 0 - 2147483647	Mandatory	The identity of an offer.

MOAttributes

Table 84 covers the parameters that can be used in a deletePredefinedOffer response.

Table 84 Delete PredefinedOffer Parameters
Parameter				Type	Occurrence	Description
subscriberNumber				String, 1 - 28 digits	Mandatory	The subscriber identity of the subscriber related to the operation. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes. If another format is used then it must be indicated by subscriberNumberNAI parameter.
originTransactionID				String, 0 - 9999 9999 9999 9999 9999 digits	Mandatory	Reference to a single operation, generated by the system it was initiated from. The value in this parameter must be unique per operation and can be a sequence number. For example, an operation in this case is a refill.
originOperatorID				String, 1 - 255 characters	Optional (0-1)	The identity of the system user or the session from where the operation was initiated. It might be used for security management or logging purposes for an example. If this parameter is absent from the request, Dynamic Activation will generate PGN system time plus the default "+0100" or the configured `ChargingTimeZone` value in Activation Logic as the parameter to NEs. Refer to User Guide for Resource Activation, Reference [4] for details of Activation Logic
offerID				Integer, 0 - 2147483647	Mandatory	The identity of an offer.
attributeInformation				Sub-MO	Optional (0-n)	Contains information about attributes. It will be returned as response to GetAccountDetails, GetBalanceAndDate, GetOffers and Refill if requested with requestAttributesFlag and if any attributes exist that have a value. attributeInformation will also be included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, attributeInformation will include all attributes that have values.
	attributeName			String, 1 - 128 characters	Mandatory	The name of the attribute.
	attributeValueString			String, 1 - 128 extended characters Extended characters which allows all US-ASCII values from 32 to 126 (hexadecimal 0x20 to 0x7e).	Mandatory	The string value of an attribute.
	attributeValueDate			DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	The date value of an attribute. DateMin to DateMax or DateInfinite
	attributeValueDecimal			Sub-MO	Mandatory	Information about a decimal value.
		attributeValueNumber		String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	The parameter contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
		numberOfDecimals		Integer, 0 - 15	Mandatory	The parameter forms together with attributeValue Number a decimal number. The parameter contains information about where to put the decimal sign counted in positions from the right.
	attributeValueInteger			Integer, -2147483648 to 2147483647	Optional (0-1)	Contains the integer value of an attribute
	attributeSource			Integer, 1 - 255 1 = Default value from definition 2 - 255 = Reserved for future use	Optional (0-1)	Contain the source from where the attribute is fetched. Default (parameter is not included) means the attribute is stored on the entity provisioned for a subscriber.
treeParameterSetInformation				Sub-MO	Optional (0-n)	Contains information about treeParameterSets divided per tree names It is returned as response to GetAccountDetails, GetBalanceAndDate and GetOffers if requested with requestTreeParameterSetsFlag and if any attributes exist that have a value. It is also included as response to DeleteOffer and DeleteSubscriber if any attributes is removed. For UpdateOffer reponse, it includes all attributes that have values.
	serviceProvider			Integer, 1 - 6 1: Rating template 2: Policy rulfe determination template 3: Product notification template 4: Product fee template 5: Product provision template 6: Quota determination template	Optional (0-1)	Contains the service provider which is the type of treeParameter.
	treeParameterInformation			Sub-MO	Optional (0-n)	Contains information about the changes made to a treeParameter.
		treeParameterName		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the name of the tree parameter.
		treeParameterValueString		String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash).	Optional (0-1)	Contains the string value of a tree parameter.
		treeParameterValueDate		DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Optional (0-1)	Contains the date value of a tree parameter.
		treeParameterValueDecimal		Sub-MO	Optional (0-n)	Contains information about a decimal value. It is enclosed in a <struct> of its own. The structure contains one parameter treeParameterValueNumber containing the significant digits and a numberOfDecimals part telling how many decimals are used.
			treeParameterValueNumber	String, -999 999 999 999 999 to 999 999 999 999 999 SignedNumeric	Mandatory	Contains up to 15 significant digits that together with the numberOfDecimals parameter forms a decimal number. There is no decimal sign included in this parameter.
			numberOfDecimals	Integer, 0 - 15	Mandatory	Contains information about where to put the decimal sign counted in positions from the right and forms together with attributeValueNumber a decimal number.
		treeParameterValueInteger		String, -9223372036854775807 to 9223372036854775807 SignedNumeric	Optional (0-1)	Contains the integer value of a tree parameter
		treeParameterValueSchedule			Optional (0-1)	Contains values for a schedule event.
			scheduledFrequency	Integer, 1 - 7	Mandatory	Contains the frequency of the schedule (monthly, weekly, daily etc). 1: Yearly 2: Monthly 3: Weekly 4: Daily 5: Hourly 6: Minutely 7: Secondly
			scheduledInterval	Integer, 1 - 99999	Optional (0-1)	Contains the interval of the schedule (For example every week, every second, every month, etc.).
			scheduledMonth	Integer, 1 - 12	Optional (0-n)	Contains the number of month for the schedule.
			scheduledDayOfMonth	Integer, -1 - 31	Optional (0-n)	Contains the number of the days of month for the schedule. Value -1 means last day of month.
			scheduledDayOfWeek	Integer, 1 - 7	Optional (0-n)	Contains the week day for the schedule. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
			scheduledHour	Integer, 0 - 23	Optional (0-1)	Contains the time (hour) for the schedule.
			scheduledMinute	Integer, 0 - 59	Optional (0-1)	Contains the time (minute) for the schedule.
			scheduledSecond	Integer, 0 - 59	Optional (0-1)	Contains the time (second) for the schedule.
		treeParameterValueDayOfWeek		Integer, 0 - 7	Optional (0-1)	Contains the value of day of week of a tree parameter. 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday 7: Sunday
		treeParameterValueDateRange		Sub-MO	Optional (0-1)	The struct is used to define the range of dates valid for a tree parameter. It contains two dates in a sequence to specify the range needed for tree parameter.
			treeParameterStartDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the initial date of range applied for a tree parameter.
			treeParameterEndDate	DateTime.iso8601: YYYY-MM-DDT hh:mm:ssTZ TZ is the deviation in hours from UTC, the format is: [+\|-] hh:mm For example, 2005-11- 24T23:59:59+08:00	Mandatory	Contains the final date of range applied for a tree parameter.
		treeParameterValueTime		String，1 - 8 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-1)	Contains the value of time applied for a tree parameter.
		treeParameterSource		Integer, 1 - 2 1: Tree parameter value fetched from the offer definition 2: Tree parameter fetched from the template tree definition	Optional (0-1)	Contains the source where the tree parameter is fetched. Default (parameter is not included) means the tree parameter is stored on the entity provisioned for a subscriber.
		associatedPartyID		String, 1 - 28 digits	Optional (0-1)	The subscriber identity of the consumer or provider. The default format of the parameter is the same numbering format as used by the account database, this also includes support of leading zeroes.
productOfferingName				String，1 - 128 characters Allowed characters are a-z. A-Z, 0-9, - (hyphen) and / (slash)	Optional (0-n)	Contains the identity of a product offering.
negotiatedCapabilities				Integer, 0 - 2147483647	Optional (0-n)	Indicate the negotiated capabilities between the client and server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active.
availableServerCapabilities				Integer, 0 - 2147483647	Optional (0-n)	Indicate the available capabilities at the server node. The value 0 indicates that none of the capabilities in the element are active, and the value 2147483647 indicates that all of the capabilities in the element are active. If only one element is present and is set to 0, no functions after release AIR-IP 5.0 are active, only legacy functionality can be used.

26.3 Examples

This section gives an example of the deletePredefinedOffer request and response message. This example shows how to delete an AIR PredefinedOffer.

Request Example

Example 116 Delete PredefinedOffer Request Message

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/"
 xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/">
  <soapenv:Header>
    <cai3:SessionId>86e7024622bd4af8bbd57a716dd72cbc</cai3:SessionId>
  </soapenv:Header>
  <soapenv:Body>
    <cai3:Delete>
      <cai3:MOType>PredefinedOffer@http://schemas.ericsson.com/ma/CS/AIR/</cai3:MOType>
      <cai3:MOId>
        <air:subscriberNumber>55897213</air:subscriberNumber>
        <air:offerID>513</air:offerID>
      </cai3:MOId>
      <cai3:MOAttributes>
        <air:deletePredefinedOffer offerID="513" subscriberNumber="55897213">
          <air:originNodeType>ADM</air:originNodeType>
          <air:originHostName>AIR</air:originHostName>
          <air:originTransactionID>14428155633403480337</air:originTransactionID>
          <air:originTimeStamp>2017-10-08T12:00:00+00:00</air:originTimeStamp>
          <air:originOperatorID>egumeng</air:originOperatorID>
          <air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
          <air:negotiatedCapabilities>16296</air:negotiatedCapabilities>
        </air:deletePredefinedOffer>
      </cai3:MOAttributes>
    </cai3:Delete>
  </soapenv:Body>
</soapenv:Envelope>

Response Example

Example 117 Delete PredefinedOffer Response Message

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
  <S:Header>
    <cai3g:SessionId>86e7024622bd4af8bbd57a716dd72cbc</cai3g:SessionId>
  </S:Header>
  <S:Body>
    <DeleteResponse xmlns="http://schemas.ericsson.com/cai3g1.2/">
      <MOId>
        <air:subscriberNumber xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/"
 xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/"
 xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">55897213
        </air:subscriberNumber>
        <air:offerID xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/"
 xmlns:cai3="http://schemas.ericsson.com/cai3g1.2/"
 xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">513</air:offerID>
      </MOId>
      <MOAttributes>
        <air:deletePredefinedOfferResponse xmlns:air="http://schemas.ericsson.com/ma/CS/AIR/">
          <air:subscriberNumber>55897213</air:subscriberNumber>
          <air:originTransactionID>14428155633403480337</air:originTransactionID>
          <air:originOperatorID>egumeng</air:originOperatorID>
          <air:offerID>513</air:offerID>
          <air:attributeInformation>
            <air:attributeName>LOS</air:attributeName>
            <air:attributeValueString>VauleParameter1</air:attributeValueString>
          </air:attributeInformation>
          <air:attributeInformation>
            <air:attributeName>TemplateVersion</air:attributeName>
            <air:attributeValueString>ChangeDefault</air:attributeValueString>
          </air:attributeInformation>
          <air:attributeInformation>
            <air:attributeName>parent_offer</air:attributeName>
            <air:attributeValueInteger>1009</air:attributeValueInteger>
          </air:attributeInformation>
          <air:treeParameterSetInformation>
            <air:serviceProvider>3</air:serviceProvider>
            <air:treeParameterInformation>
              <air:treeParameterName>OfferType</air:treeParameterName>
              <air:treeParameterValueString>Sunday</air:treeParameterValueString>
            </air:treeParameterInformation>
          </air:treeParameterSetInformation>
          <air:treeParameterSetInformation>
            <air:serviceProvider>4</air:serviceProvider>
            <air:treeParameterInformation>
              <air:treeParameterName>Offer_fee_once</air:treeParameterName>
              <air:treeParameterValueDecimal>
                <air:treeParameterValueNumber>41</air:treeParameterValueNumber>
                <air:numberOfDecimals>1</air:numberOfDecimals>
              </air:treeParameterValueDecimal>
            </air:treeParameterInformation>
            <air:treeParameterInformation>
              <air:treeParameterName>Offer_fee</air:treeParameterName>
              <air:treeParameterValueInteger>1009</air:treeParameterValueInteger>
            </air:treeParameterInformation>
          </air:treeParameterSetInformation>
          <air:productOfferingName>Test_EDA</air:productOfferingName>
          <air:negotiatedCapabilities>809988676</air:negotiatedCapabilities>
          <air:negotiatedCapabilities>16296</air:negotiatedCapabilities>
          <air:availableServerCapabilities>809988676</air:availableServerCapabilities>
          <air:availableServerCapabilities>16296</air:availableServerCapabilities>
        </air:deletePredefinedOfferResponse>
      </MOAttributes>
    </DeleteResponse>
  </S:Body>
</S:Envelope>

27 Faults and Errors

The generic structure for fault responses is covered in Generic CAI3G Interface 1.2, Reference [2]. That document also covers the generic fault codes, which are applicable to all CAI3G operations.

This section covers the subordinate CAI3G errors. They can appear in the errorcode element in the error message.

AIR and AF specific error codes are described in this section. These error codes are included in the Fault type PGFault.

For generic error codes, and information about the different Fault types, see CAI3G Implementation, Reference [3].

27.1 AIR Error Codes

The following table covers error codes for AIR commands over the CAI3G interface.

Table 85 AIR Error Codes
Error Code	Error Message	Mapped from
17100	Illegal request message	1000
17101	Mandatory field missing	1001
17102	Illegal data type	1002
17103	Data out of bounds	1003
17104	Unknown operation	1004
17105	Internal server error	1005
17107	Overload rejection	1007
17111	OK but supervision period exceeded	1
17112	OK but Service Fee period exceeded	2
17199	Other Error No Retry	999
17200	Other Error	100
17202	Subscriber not found	102
17203	Account barred from refill	103
17204	Temporary Blocked	104
17205	Dedicated account not allowed	105
17206	Dedicated account negative	106
17207	Voucher status used by same	107
17208	Voucher status used by different	108
17209	Voucher status unavailable	109
17210	Voucher status expired	110
17211	Voucher status stolen or missing	111
17212	Voucher status damaged	112
17213	Voucher status pending	113
17214	Voucher type not accepted	114
17215	Refill not accepted	115
17217	Service class change not allowed	117
17219	Invalid voucher activation code	119
17220	Invalid refill profile	120
17221	Supervision period too long	121
17222	Service fee period too long	122
17223	Maximum credit limit exceeded	123
17224	Below minimum balance	124
17226	Account not active	126
17227	Accumulator not available	127
17228	Invalid PIN Code	128
17229	FAF number does not exist	129
17230	FAF number not allowed	130
17233	Service class list empty	133
17234	Accumulator overflow	134
17235	Accumulator underflow	135
17236	Date adjustment error	136
17237	Get balance and date not allowed	137
17238	No PIN Code registered	138
17239	Dedicated account not defined	139
17240	Invalid old Service Class	140
17241	Invalid Language	141
17242	Subscriber already installed	142
17243	Invalid master subscriber	143
17244	Subscriber already activated	144
17245	Already linked subordinate	145
17246	Already linked as master	146
17247	Invalid old community list	147
17248	Invalid new community list	148
17249	Invalid promotion plan end date	149
17250	Invalid promotion plan id	150
17251	Promotion plan not found	151
17252	Deblocking of expired account	152
17253	Dedicated account max credit limit exceeded	153
17254	Invalid old SC date	154
17255	Invalid new service class	155
17256	Delete subscriber failed	156
17257	Invalid account home region	157
17258	Maximum number of allocated promotion plans that is already reached	158
17259	Charged FaF not active for service class	159
17260	Operation not allowed from current location	160
17261	Failed to get location information	161
17265	Offer not found	165
17267	Invalid unit type	167
17290	The PAM service id provided in the request exists.	190
17291	The PAM service id provided in the request was out of range, or did not exist.	191
17292	The old PAM class id provided in the request was incorrect or did not match the existing PAM class id for the account.	192
17293	The PAM class id or new PAM class id provided in the request was incorrect.	193
17294	The old schedule id provided in the request was incorrect or did not match the existing schedule id for the account.	194
17295	The schedule id or new schedule id provided in the request was incorrect.	195
17296	Invalid deferred to date	196
17297	Periodic account management evaluation failed	197
17298	Too many PAM services given in the sequence or the number of services on the account would be exceeded.	198
17299	The PAM period, provided or calculated, could not be found in the schedule.	199
17300	The PAM class id or new PAM class id provided in the request does not exist.	200
17301	The schedule id or new schedule id provided in the request did not exist or no valid period found.	201
17302	Invalid PAM indicator	202
17314	One or several of the provided offers are not defined or there is a mismatch between provided offer type and the offer type definition. It is also used when the offer type is not supported for the requested update.	214
17315	Too many offers of the type Multi User Identification given in the sequence or the Multi User Identification offer is already activated for the subscriber.	215
17316	Use threshold not found in definition	216
17317	Use counter not found in definition	217
17319	Use counter value out of bounds	219
17320	The supplied value type does not match the definition.	220
17321	No subordinate subscribers connected to the account	221
17325	The offer start date cannot be changed because the offer is already active.	225
17326	Invalid PAM Period Relative Dates Start PAM Period Indicator	226
17327	Invalid PAM Period Relative Dates Expiry PAM Period Indicator	227
17330	Not allowed to convert to other type of lifetime	230
17332	Not allowed to delete PAM service ID in use. The PAM Service ID is used by an Offer, DA, or sub-DAs Relative Dates.	232
17337	Not allowed to add a Provider ID to another offer type than the provider account offer.	237
17338	Not allowed to create a provider account offer without providing a provider ID.	238
17333	Invalid PAM service priority	233
17334	The old PAM service priority provided in the request was incorrect or did not match the existing PAM service priority for the account.	234
17335	Not allowed to connect the PAM class to the PAM Service. The account already has a bill cycle service. Only one bill cycle per account is allowed.	235
17336	The PAM service priority is already used for some other PAM services.	236
17347	The product is not found.	247
17348	The shared account offer is not allowed on a subordinate subscriber.	248
17350	The communication ID change fails because of insufficient funds.	250
17351	The communication ID change fails. The AIA does not match the MSISDN.	251
17352	Invalid combination of values	252
17353	The communication ID change fails. The previous MSISDN change is pending.	253
17354	The Communication ID change fails. The new MSISDN is not available.	254
17355	The operation is not allowed on a subordinate subscriber.	255
17356	Attribute name does not exist.	256
17357	Operation not allowed since End of Provisioning is set.	257
17358	Attribute value does not exist.	258
17359	Attribute value exists.	259
17362	Attribute update action not allowed for this attribute.	262
17363	Attribute value is not possible to override for the subscriber.	263
17364	The result of the operation is a nominal value that is out of bounds.	264
17366	Permission denied	266
17388	Tree parameter name does not exist	288
17389	Tree parameter value has wrong format	289
17390	Service provider (= tree type) does not exist	290
17397	Maximum limit of offers exceeded during Installation of subscriber	297
17398	Failure to Delete Subscriber, that had been successfully installed, but should be deleted due to failure of offers	298
17399	Failure to Install Subscriber	299
17344	Associated party ID not allowed for this type of entity	244
17335	Not allowed to connect the PAM Class to the PAM Service. The account already has a bill cycle service. Only one bill cycle and one related cycle PAM service per account is allowed	235
17501	Unauthorized	401

27.2 AF Error Codes

The following table covers error codes for AF commands over the CAI3G interface.

Table 86 AF Error Codes
Error Code	Error Message	Mapped from
17051	Format error	1
17052	Name server internal failure.	2
17053	The domain name does not exist.	3
17054	Not supported by the name server.	4
17055	Refused	5
17056	Name exists when it should not.	6
17057	RR set exists when it should not.	7
17058	RR set that should exist does not.	8
17059	Not authoritative	9
17060	Name is not contained in zone.	10

27.3 CAI3G Error Message Example

The following is an example of a CAI3G error message:

Example 118 CAI3G Error Message for AIR

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>0418dc80b9f149a2b05f6bc8052ffedf</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <ns2:Fault xmlns:ns2="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:ns3="http://www.w3.org/2003/05/soap-envelope">
         <faultcode>ns2:Server</faultcode>
         <faultstring>This is a server fault</faultstring>
         <detail>
            <Cai3gFault:Cai3gFault xmlns="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:Cai3gFault="http://schemas.ericsson.com/cai3g1.2/">
               <faultcode>4006</faultcode>
               <faultreason>
                  <reasonText>External error.</reasonText>
               </faultreason>
               <faultrole>MF</faultrole>
               <details>
                  <PGFault:PGFault xmlns="http://schemas.ericsson.com/pg/1.0" 
xmlns:PGFault="http://schemas.ericsson.com/pg/1.0">
                     <errorcode>17242</errorcode>
                     <errormessage>Subscriber already installed.</errormessage>
                     <errordetails>External error. Error occurred when provisioning AIR. 
                        - [Processed by PG Node: node1]</errordetails>
                  </PGFault:PGFault>
               </details>
            </Cai3gFault:Cai3gFault>
         </detail>
      </ns2:Fault>
   </S:Body>
</S:Envelope>

Example 119 CAI3G Error Message for AF

<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:cai3g="http://schemas.ericsson.com/cai3g1.2/">
   <S:Header>
      <cai3g:SessionId>a4d8cbfcab6d4605b2afb66092025b91</cai3g:SessionId>
   </S:Header>
   <S:Body>
      <ns2:Fault xmlns:ns2="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:ns3="http://www.w3.org/2003/05/soap-envelope">
         <faultcode>ns2:Server</faultcode>
         <faultstring>This is a server fault</faultstring>
         <detail>
            <Cai3gFault:Cai3gFault xmlns="http://schemas.ericsson.com/cai3g1.2/" 
xmlns:Cai3gFault="http://schemas.ericsson.com/cai3g1.2/">
               <faultcode>4006</faultcode>
               <faultreason>
                  <reasonText>External error.</reasonText>
               </faultreason>
               <faultrole>MF</faultrole>
               <details>
                  <PGFault:PGFault xmlns="http://schemas.ericsson.com/pg/1.0" 
xmlns:PGFault="http://schemas.ericsson.com/pg/1.0">
                     <errorcode>17056</errorcode>
                     <errormessage>Name Exists when it should not.</errormessage>
                     <errordetails>External error. Error occurred when provisioning AF. 
                         - [Processed by PG Node: node1]</errordetails>
                  </PGFault:PGFault>
               </details>
            </Cai3gFault:Cai3gFault>
         </detail>
      </ns2:Fault>
   </S:Body>
</S:Envelope>

Reference List


[1] Library Overview, 18/1553-CSH 109 628 Uen
[2] Generic CAI3G Interface 1.2, 2/155 19-FAY 302 0003 Uen
[3] CAI3G Implementation, 26/155 19-CSH 109 628 Uen
[4] User Guide for Resource Activation, 1/1553-CSH 109 628 Uen
[5] Solution Description Charging and CBiO, 1/221 02-CSH 109 628 Uen