Contents

1   Introduction

This document describes how to delete a node credential.

1.1   Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1   Conditions

The following conditions must apply:

• The user has the System Security Administrator role.
• All Managed Object (MO) references to the NodeCredential MO to be deleted are deleted.
• An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

2   Procedure

To delete a node credential:

1. Navigate to the CertM MO, for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,SecM=1,CertM=1

2. Enter Config mode:

   (CertM=1)>configure

3. List the node credentials:

   (config-CertM=1)>show

   The following is an example output:

   CertM=1 [...] NodeCredential=1 NodeCredential=2 NodeCredential=3 [...]

4. Delete the node credential, for example:

   (config-CertM=1)>no NodeCredential=1

5. Commit the change:

   (config-CertM=1)>commit

   All resources belonging to the NodeCredential MO are deleted.

6. Verify the deletion by checking the NodeCredential MO instances:

   (CertM=1)>show

   The following is an example output:

   CertM=1 [...] NodeCredential=2 NodeCredential=3 [...]