Contents

1   Introduction

This document describes how to deactivate the Emergency Unlock mode. The user can deactivate the Emergency Unlock mode before it automatically ends to check that the managed element transitions to the expected License Management operation mode.

1.1   Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1   Conditions

The following conditions must apply:

• The Emergency Unlock mode is ACTIVATED.
• An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

2   Procedure

To deactivate the Emergency Unlock mode:

1. Navigate to the EmergencyUnlock managed object, for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,Lm=1,EmergencyUnlock=1

2. Deactivate the Emergency Unlock mode:

   (EmergencyUnlock=1)>deactivate

   The system returns true if the operation is successful.

3. Verify that the Emergency Unlock mode was deactivated:

   (EmergencyUnlock=1)>show activationState

   The system returns activationState=INACTIVE if the Emergency Unlock mode now is deactivated.