Stop Threshold Monitoring Job

1 Description

This instruction describes how to stop a threshold monitoring job. In maintenance situations, the user can suspend a threshold monitoring job to avoid forwarding threshold alarms to the management system when the Managed Element (ME) is unstable and already given specific attention. This is also a way to reduce the load on the ME.

2 Procedure

2.1 Stop Threshold Monitoring Job

Prerequisites

No documents are required.
No tools are required.
The following conditions must apply:
- The job name is known.
  In this instruction, the job name example is POT_Thr_Job.
- An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

Steps

Navigate to the PmJob managed object, for example:
>dn ManagedElement=NODE06ST,SystemFunctions=1,Pm=1,PmJob=POT_Thr_Job
Enter Config mode:
(PmJob=POT_Thr_Job)>configure
Set the PmJob state to STOPPED:
(config-PmJob=POT_Thr_Job)>requestedJobState=STOPPED
Commit the PmJob configuration:
(config-PmJob=POT_Thr_Job)>commit

Verify the result:

(PmJob=POT_Thr_Job)>show -v

The following is an example output:

PmJob=POT_Thr_Job
   compressionType=[] <empty>
   currentJobState=STOPPED <read-only>
   granularityPeriod=FIFTEEN_MIN <default>
   jobControl=FULL <default> <read-only>
   jobGroup=[] <empty>
   jobPriority=MEDIUM <default>
   jobType=THRESHOLDJOB
   pmJobId="POT_Thr_Job"
   reportContentGeneration=CHANGED_ONLY <default>
   reportingPeriod=FIFTEEN_MIN <default>
   requestedJobState=STOPPED
   MeasurementReader=POT_mr

1	Description
2	Procedure
2.1	Stop Threshold Monitoring Job