| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
mtasUCRouting
-
This attribute defines the primary key of MtasUCRouting and this section describes the MtasUCRouting attributes.
|
BasicAdmState |
-
mtasUCRoutingAdministrativeState
=
LOCKED
-
This attribute defines the administrative state of the UC Routing service in MTAS.
When Unlocked, the call is routed to the external UC system to execute the enterprise services of the served user.
When Locked, the call is not routed to the external UC system.
Takes effect: New session
|
MtasString0to128DT[0..1] |
-
mtasUCRoutingNormalizedNumberHeader
=
Ericsson-Normalized-Number
-
This attribute defines the name of the private SIP header that contains the normalized number. The header is sent in the outgoing INVITE from the originating MTAS towards the UC system.
Takes effect: New session
|
MtasString0to128DT[0..1] |
-
mtasUCRoutingOriginalDestinationNumberHeader
=
Ericsson-Original-Destination-Number
-
This attribute defines the name of the private SIP header that contains the original dialed number as received in the initial INVITE at the originating MTAS. The header is sent in the outgoing INVITE from the originating MTAS towards the UC system.
Takes effect: New session
|
MtasString0to128DT[0..1] |
-
mtasUCRoutingPSUHeader
=
Ericsson-UCMobility-PSU
-
This attribute defines the name of the private SIP header that contains the served-user identity of the UC business user. The header is sent in the outgoing INVITE from MTAS towards the UC system.
Takes effect: New session
|
MtasTadsCsRetryPsSipErrorCodesDT[0..30] nonUnique |
-
mtasUCRoutingSessionContinuationErrorCodes
-
This attribute defines the list of SIP error codes from the UC-System/SBG when the UC-system is not available e.g. due to the connectivity loss. Each entry in the list can define an individual or a range of SIP error code(s). On receiving any of the configure SIP error code, MMTel AS continues the call towards the originally dialled number.
Specification: Single SIP error code (three numerical characters, like 400) or SIP error code range (three numerical character, dash, three numerical characters, like 400-499)
Takes effect: New session
|
MtasUCRoutingSuppressServiceNumbersDT |
-
mtasUCRoutingSuppressServiceNumbers
=
SUPPRESSION_DISABLED
-
This attribute suppress/controls routing of call toward UC system.
If 1, when user calls to Service(non-uc) number, MTAS will not route call toward UC System.
If 0, when user calls to Service(non-uc) number, MTAS will route call toward UC System.
Takes effect: New session
|
MtasString0to128DT[0..1] |
-
mtasUCRoutingTermReceivedNumberHeader
=
Ericsson-Term-Received-Number
-
This attribute defines the name of the private SIP header that contains the number as received in the initial INVITE at the terminating-trunk MTAS. The header is sent in the outgoing INVITE from the terminating-trunk MTAS towards the UC system.
Takes effect: New session
|
MtasUCRoutingTermTrunkResponseDT |
-
mtasUCRoutingTermTrunkResponse
=
480
-
This attribute defines which SIP error response is sent by MTAS when the UC routing service is unavailable in the terminating-trunk session case.
Takes effect: New session
|