License Management, Emergency Unlock Reset Key Required
MTAS
Contents
1 Alarm Description
The alarm is raised when less than two Emergency Unlock attempts remain.
|
Alarm Cause |
Description |
Fault Reason |
Fault Location |
Impact |
|---|---|---|---|---|
|
Less than two Emergency Unlock attempts remain |
Emergency Unlock mode is activated. There is one or zero Emergency Unlock attempts left. |
The number of remaining Emergency Unlock attempts is no longer optimal |
License server |
When the Managed Element (ME) is in a state where Emergency Unlock can no longer be activated, the ME can end up in a situation where there is impact on features or capacity |
2 Procedure
2.1 Handle Alarm License Management, Emergency Unlock Reset Key Required
Prerequisites
- This instruction references the following document:
- No tools are required.
- The following conditions must apply:
Steps
- Contact the Ericsson software supply organization to order an MTAS Emergency Unlock Reset license key. For MTAS, the Emergency Unlock Reset license Key ID is FAT1020383/00001. The Emergency Unlock Reset license Key is delivered along with the other license keys, that is, within a new license key file. Ordered license keys are made available in NeLS and are not installed locally.
- After the Emergency Unlock Reset Key has been made available in NeLS, the activationsLeft attribute in the EmergencyUnlock Managed Object (MO) is automatically reset.
- In ECLI, check the value of attribute activationsLeft in the EmergencyUnlock MO, for example:
show ManagedElement=NODE06ST,SystemFunctions=1,Lm=1,EmergencyUnlock=1,activationsLeft
The following is an example output:
activationsLeft=2
- Is the alarm cleared?
Yes: Proceed with Step 7.
No: Continue with the next step.
- Perform data collection, refer to Data Collection Guideline.
- Consult the next level of maintenance support. Further actions are outside the scope of this instruction.
- Job is completed.