| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
vtasMmt
-
This attribute defines the primary key of VtasMmt and this section describes the VtasMmt attributes.
|
BasicAdmState |
-
vtasMmt199Generation
=
UNLOCKED
-
This attribute defines the administrative state of the 199 provisional response generation.
If set to Enabled, 199 provisional response will be generated across multiple services to inform the caller that an early dialog has been terminated.For example, 199 provisional response will be generated when MTAS initiates the release of the MTAS established announcement early dialog.See also vtasMmt199Method attribute that determines for which scenarios the 199 Early Dialog Terminated message is sent. Prerequisite for sending 199 Early Dialog Terminated message is the "199" option-tag indicated in the Supported header of the associated dialog establishment INVITE request.
Takes effect: New session
|
MtasMmt199MethodDT |
-
vtasMmt199Method
=
MMT_199_ON_ALL
-
This attribute controls whether 199 Early Dialog Terminated message shall be sent for all MMTel AS initiated early dialogs or only for the dialogs that do not terminate the session. This attribute has effect only if vtasMmt199Generation is set to 1=UNLOCKED.
Dependencies: This attribute has effect only if vtasMmt199Generation is set to 1=UNLOCKED
Takes effect: New session
|
AdmState |
-
vtasMmtAdministrativeState
=
LOCKED
-
This attribute defines the administrative state of the VtasMmt MO. Controls the possibilities
to set up MMTel sessions. Changing this attribute impacts all traffic, including conference, for more information see chapter "Administrative State".
Takes effect: New session
|
BasicAdmState |
-
vtasMmtAscfAdministrativeState
=
LOCKED
-
This attribute defines the administrative state of the AS Controlled Forking feature. This attribute determines if MTAS can use terminal selector in the INVITEs sent to the served user.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasMmtAudioAnnounceCode
=
0
-
This attribute defines which audio announcement that is to be played to a party calling an unregistered PUI.
Takes effect: New session
|
BasicAdmState |
-
vtasMmtAudioAnnouncement
=
LOCKED
-
This attribute defines if an audio network announcement must be played. When the attribute is enabled, and the
incoming session is for an unregistered user, an audio announcement corresponding to the
value of the vtasMmtAudioAnnounceCode attribute will be played to the calling party.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasMmtAVAudioCode
=
0
-
This attribute defines which audio announcement that is to be played to a party calling an unregistered PUI.
The video code vtasMmtAVVideoCode attribute must be configured for this audio code.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasMmtAVVideoCode
=
0
-
This attribute defines the video announcement component of the Audio-Video announcement to
be played to a party calling an unregistered PUI. The audio code attribute (vtasMmtAVAudioCode)
is also configured for this Audio-Video announcement.
Takes effect: New session
|
MtasString0to032DT[0..1] |
-
vtasMmtBusyAnnouncementName
-
This attribute defines the name of the generic announcement representing a busy indication, specified in an instance of VtasGaAnn, to be used in called number re-targeting scenarios when the MMTel AS already has an established session with served user.If this attribute is empty or does not specify an instance of VtasGaAnn,no announcement is played.
Dependencies: An instance of VtasGaAnn with this string must exist
Takes effect: New session
|
MtasString0to128DT[0..1] |
-
vtasMmtChargedServiceId
=
+g.ericsson.mmt
-
This attribute defines the charged service id, in feature tag format, for MMTel sessions to be included in charging data.
Takes effect: New session
|
MtasString1to128DT[0..1] |
-
vtasMmtChargingProfileRef
=
Default
-
This attribute defines the charging profile that is applicable for the MMTel.
Takes effect: New session
|
MtasString0to128DT |
-
vtasMmtDefPAssertedService
=
urn:urn-7:3gpp-service.ims.icsi.mmtel
-
This attribute defines the string to configure the default P-Asserted-Service. The attribute shall only applicable when vtasMmtPAssertedSeviceBehavior is set to 1 or 2.
Takes effect: New session
|
MtasMmtDomesticRoamingDT |
-
vtasMmtDomesticRoaming
=
ENHANCED_SUPPORT
-
This attribute defines options to select between MCC and MCC+MNC based roaming determination to detect network level roaming after the country level roaming is detected. This attribute is ignored when mtasMmtVersion/vtasMmtVersion is set to INITIAL_VERSION.
Takes effect: New session
|
VtasDropBackDT |
-
vtasMmtDropBack
=
USE_OTP_VALUES
-
This attribute defines whether this virtual operator wishes to use the values in VtasMmt or the values in MtasMmt.
Takes effect: New registration
|
MtasBooleanDT |
-
vtasMmtExtendedFeatureTag
=
false
-
This attribute defines if the MTAS Extended MMTel feature tagging capability will be used.
For example, if configured then the ICSI for MMTel and the 'audio' tags with the values "explicit;require" are used to tag calls, true indicates extended feature tags,
false indicates no extended feature tags.
Takes effect: New session
|
MtasString0to064DT[0..1] |
-
vtasMmtExtendedStringFeatureTag
=
audio;explicit;require
-
This attribute defines the string extension to add to the primary feature tag. The string extension
to the primary feature tag is added, if a primary feature tag exists or is added by the MTAS, and that the
extended feature tag is configured to be used.
Takes effect: New session
|
BasicAdmState |
-
vtasMmtGen199Reliably
=
LOCKED
-
This attribute defines whether the 199 provisional response is generated reliably or unreliably.
If set to Enabled, MTAS generates a 199 provisional response reliably.
Dependencies: The Enabled setting has an effect only in that case if the vtasMmt199Generation attribute is set to Enabled, and the "199" option-tag was indicated in the Supported header field of the associated dialog establishment INVITE request, and the "100rel" option-tag was indicated in the Require header field of the associated dialog establishment INVITE request.
Takes effect: New session
|
MtasString0to032DT[0..1] |
-
vtasMmtGenericFailureAnnouncementName
-
This attribute defines the name of the generic announcement representing a 'called party not available' indication,specified in an instance of VtasGaAnn, to be used in called number re-targeting scenarios when the MMTel AS already has an established session with served user. If this attribute is empty or does not specify an instance of VtasGaAnn, no announcement is played.
Dependencies: An instance of VtasGaAnn with this string must exist
Takes effect: New session
|
MtasGaAnnIdRefDT[0..1] |
-
vtasMmtLocalRingbackAnnouncementName
-
This attribute defines the name of the generic announcement, specified in an instance of MtasGaAnn, to be used in case of Local Ringback scenario. If this attribute is empty or does not specify an instance of MtasGaAnn, no announcement is played.
Takes effect: New session
|
MtasMmtLocalRingBackModeDT |
-
vtasMmtLocalRingBackMode
=
USER_CONTROLED
-
The attribute defines if there shall be user controlled ring back or network provided ring back.
Takes effect: New session
|
MtasMmtLoopDetectionDT |
-
vtasMmtLoopDetection
=
DISABLED
-
This attribute defines whether to enable/disable the call diversion loop detection function. When enabled and a loop is detected the call is rejected with SIP response 482 Loop Detected.
Takes effect: New session
|
MtasMmtMaxNumberOfSessionsDT |
-
vtasMmtMaxNumberOfSessions
=
10
-
This attribute defines the maximum number of MMTel sessions that a PUI can have.
Takes effect: New session
|
MtasString0to064DT[0..1] |
-
vtasMmtMediaBasedRoutingAudioPrefix
-
This attribute defines the string extension to add as a prefix after the + sign to
the Tel URI when SDP only has audio defined as a media.
Takes effect: New session
|
MtasMmtMidCallRenegotiationRetryAfterSupportDT |
-
vtasMmtMidCallRenegotiationRetryAfterSupport
=
MIDCALL_RETRY_DISABLED
-
This attribute enables the feature of retrying Re-Invite/UPDATE request on final response 500 with Retry-After header. The feature is used when re-INVITE/UPDATE sent from caller/callee is relayed to the other party.
Takes effect: New session
|
MtasMmtMobileBehaviourDT |
-
vtasMmtMobileBehaviour
=
MOBILE_ENHANCEMENT_OFF
-
Not Used. This attribute defines the behaviour of the mobile device for the Multi Mobile under one IRS.It determines, if MMTEL AS support extra information for Mobile devices . E.g reporting MSISDN and IMSI in charging etc. Not used.
Takes effect: New session
|
MtasString3to256DT[0..64] nonUnique |
-
vtasMmtMobileUserDetermination
-
This attribute defines the identification strings for the Mobile Subscription.It is an array of strings. MMTEL AS uses these configured entries to identify mobile subscription by doing right string match of each entry with domain string part of each of the IMPU in IRS.
Takes effect: New session
|
MtasMmtMultiMobileSupportDT |
-
vtasMmtMultiMobileSupport
=
PRIMARY_MOBILE_SUBSCRIPTION_ACTIVE
-
Not Used. This attribute defines the support for the Multi Mobile subscription under one IRS.It determines if MTAS consider Multiple Mobile subscriptions provisioned for the subscriber in single IRS. Not used.
Dependencies: This attribute can be enabled only if value Multi-Sim License is granted and vtasMmtMobileBehaviour is MOBILE_ENHANCEMENT_ON
Takes effect: New session
|
MtasTimerSec00010to000300DT |
-
vtasMmtNoReplyTimer
=
180
-
This attribute defines the no reply timer for MMTel sessions. If vtasMmtOrigNoReplyTimer is enabled (> 0), vtasMmtNoReplyTimer is considered only for the terminating MMTel sessions.
Dependencies: The configured value is not to be greater than the value of the vtasCDivTimer. If mtasSipInvite2FinalResponseTimer is enabled (> 0), vtasMmtNoReplyTimer has to be at least 10 seconds shorter than mtasSipInvite2FinalResponseTimer.
Takes effect: New session
|
MtasString0to032DT
mandatory |
-
vtasMmtNpliDefaultAccessType
-
This attribute defines the acces-type part of a PANI header: "<access-type>; network-provided" generated by MTAS in the following cases:
- terminating call to unregistered UE;
- out-of-dialog NOTIFY (charging-info;SMS-DeReg) message is received from SCG node.
Dependencies: None
Takes effect: New session
|
MtasMmtOptimizedEarlyUpdateTimerDT |
-
vtasMmtOptimizedEarlyUpdateTimer
=
500
-
This attribute defines the value of a timer started after sending the 200 OK to the served user, whenever the served user has active CAT service. When the timer expires the TAS sends its own UPDATE with the original SDP offer received from the caller to force the MSC to return a true SDP answer.
Takes effect: New session
|
MtasTimerSec00000to000610DT |
-
vtasMmtOrigNoReplyTimer
=
0
-
This attribute defines the no reply timer for originating MMTel sessions. The recommended value of the vtasMmtOrigNoReplyTimer is at least 2 seconds longer than the value of the vtasMmtNoReplyTimer, in order to terminate the session first by the terminating MMTel AS. The value 0 indicates that vtasMmtOrigNoReplyTimer is disabled and vtasMmtNoReplyTimer attribute defines the No Reply Timer for originating MMTel sessions too. Note that if the value is set to maximum (>600) and the call setup time reaches 10 minutes, then the Node Control function 'Hanging Process Supervision' will terminate the process unconditionally and tear down the call setup. If vtasMmtOrigNoReplyTimer is enabled (> 0), the recommended value is 182 secs if other timers are at default. If vtasMmtOrigNoReplyTimer is enabled (> 0) and mtasSipInvite2FinalResponseTimer is disabled (set to 0), recommended value has to be at least 10 sec less than the maximum limit of mtasSipInvite2FinalResponseTimer. Setting the vtasMmtOrigNoReplyTimer value greater than the maximum limit of the mtasSipInvite2FinalResponseTimer is not recommended for robustness and network performance.
Dependencies: If mtasSipInvite2FinalResponseTimer is enabled (> 0) and vtasMmtOrigNoReplyTimer is enabled (> 0), vtasMmtOrigNoReplyTimer has to be at least 10 seconds shorter than mtasSipInvite2FinalResponseTimer.
Takes effect: New session
|
MtasMmtPAssertedServiceBehaviorDT |
-
vtasMmtPAssertedServiceBehavior
=
NO_UPDATE
-
This attribute defines the behaviour to update P-Asserted-Service header in required service. When set to 0, the P-Asserted-Service is not updated. When set to 1, MMTel AS removes the original value of P-Asserted-Service header and P-Preferred-Service header, adds the new P-Asserted-Service header in Request and Response with the value configured in vtasMmtfPAssertedService. When set to 2 MMTel AS removes the original value of P-Asserted-Service header and P-Preferred-Service header, add the new P-Asserted-Service header in request with the value configured in vtasMmtDefPAssertedService.
Dependencies: None
Takes effect: New session
|
MtasMmtPemBehaviorDT |
-
vtasMmtPemBehavior
=
PEM_IN_200_OK
-
This attribute defines the behavior of the P-Early-Media when operating in the Transparent Mode.
Dependencies: None
Takes effect: New session
|
MtasTimerMSec00200to002000DT |
-
vtasMmtPresenceResponseTimer
=
1000
-
This attribute defines the time that the MTAS waits for a response to a SUBSCRIBE
sent to the Presence Agent, to obtain a served user's presence status. The attribute is also used
as the duration of the time that the MTAS waits for a NOTIFY if it receives a 2xx response to the
SUBSCRIBE.
Takes effect: New session
|
MtasQosPreconditionTimerDT |
-
vtasMmtQosPreconditionTimer
=
20
-
This attribute defines the time limit imposed to achieve the QoS precondition (RFC 3312) when
attempting to play an announcement in early media. 0 has the special meaning that no timer
is used to supervise the achievement of preconditions.
Takes effect: New session
|
MtasTimerMSec00000to004000DT |
-
vtasMmtReInviteDelayTime
=
0
-
This attribute indicates the value of the re-INVITE delay timer. Values (0, 100-4000) are allowed. If the value is set to 0 the timer is not started. The delay is used when re-INVITE is sent by an MMTel service for session renegotiation after B-party answer.
Takes effect: New session
|
MtasMmtReInviteRetryAfterSupportDT |
-
vtasMmtReInviteRetryAfterSupport
=
REINVITE_RETRY_DISABLED
-
This attribute enables the feature of retrying re-INVITE request on final response 500 with Retry-After header. The feature is used when re-INVITE is sent by an MMTel service for session renegotiation after B-party answer.
Takes effect: New session
|
MtasTimerSec00001to000005DT |
-
vtasMmtReInviteRetryAfterTimeMax
=
5
-
This attribute sets the maximum value of the re-INVITE retry time. The received Retry-After value is truncated to the upper limit if exceeds.
Takes effect: New session
|
MtasMmtRoamingCheckModeDT |
-
vtasMmtRoamingCheckMode
=
PVNI_FOR_ROAMING_CHECK_DISABLED
-
This attribute defines whether to use the PLMN ID from PVNI as additional input for roaming condition check for MMTel services.
Takes effect: New session
|
MtasMmtSendAlertingToneInResponseCodeDT |
-
vtasMmtSendAlertingToneInResponseCode
=
SEND_ALERTING_TONE_IN_183
-
This attribute defines whether the Customized Alerting Tones or the Node Ring back tone is sent in 183 Session Progress or in 180 Ringing.
Takes effect: New session
|
MtasSipRequestServerGlobalFailureDT |
-
vtasMmtSendSipOrigResponse
=
0
-
This attribute defines which SIP error response the Network Announcement for originating MTAS or Outgoing Communication Barring service sends when an announcement has been played.
Takes effect: New session
|
MtasSipRequestServerGlobalFailureDT |
-
vtasMmtSendSipTermResponse
=
0
-
This attribute defines which SIP error response the MMTel unregistered, Network Announcement or Incoming Communication Barring service sends when an announcement has been played.
Takes effect: New session
|
MtasMmtServedSubscriberTypeDT |
-
vtasMmtServedSubscriberType
=
CONSUMER
-
This attribute defines what type of subscribers are served by the MMTel node. 0 = CONSUMER, 1=BUSINESS, 2=BUSINESS_AND_CONSUMER.
Dependencies: None
Takes effect: New session
|
MtasString0to255DT[0..10] nonUnique |
-
vtasMmtSipccIdentification
-
This attribute shall contain all the feature tags that might be used in the Contact header of REGISTER request to indicate that the request represents SIP control channel registration.
Takes effect: New session
|
MtasMmtSuppressEarlyMediaHeaderDT[0..1] |
-
vtasMmtSuppressEarlyMediaHeader
-
This attribute defines a header send to the served user in the INVITE message, whenever the served user has active CAT service and the incoming INVITE does not come from a conference and does not include the isFocus extension.
Takes effect: New session
|
MtasMmtTerminalSelectorPrefixDT[0..1] |
-
vtasMmtTerminalSelectorPrefix
-
This attribute defines the prefix added in front of each provisioned feature parameter used for selecting a single terminal (terminal selector).
The prefix is for adding such elements of the feature parameter that are not relevant for the end-user.
E.g. the leading '+' indicating non RFC 3840 base parameters, or tags for operator/vendor specific namespace, e.g. '+g.operator.xxx.'.
Takes effect: New session
|
MtasString1to128DT |
-
vtasMmtTermTrunkChargingProfileRef
=
Default-TermTrunk
-
This attribute defines the charging profile that is applicable for MMTel in the terminating-trunk session.
Takes effect: New session
|
MtasMmtTermUnregBehaviorDT |
-
vtasMmtTermUnregBehavior
=
TRIGGER_ON_SIP_480_RESPONSE
-
This attribute specifies the trigger criteria of the terminated unregistered state in MTAS.
Takes effect: New session
|
MtasMmtTransparentModeDT |
-
vtasMmtTransparentMode
=
TRANSPARENT_MODE_ENABLED
-
This attribute defines whether to enable or disable transparent mode. If enabled, then QoS precondition negotiation will be possible across multiple services and unwanted backward early media from target terminals will be suppressed using 'P-Early-Media: inactive' header in SIP signals relayed upstream (to the caller).
Takes effect: New session
|
MtasQ850CauseValueNumeric0to127DT |
-
vtasMmtUnregAnnCauseValue
=
0
-
This attribute defines which Q.850 Cause Value Code that is to be included in a Reason header sent in the SIP 183 Session Progress by the MMTel unregistered service from the terminating MTAS, before the announcement is played.
Takes effect: New session
|
MtasMmtVersionDT |
-
vtasMmtVersion
=
VERSION_1
-
This attribute defines the version of the MMTel service used. It is recommended to set this attribute to the highest version.
Takes effect: New session
|
BasicAdmState |
-
vtasMmtVideoAnnouncement
=
LOCKED
-
This attribute defines if a video network announcement must be played.
When the attribute is enabled, and the incoming session is for an unregistered PUI, an announcement
corresponding to the value of the vtasMmtVideoOnlyCode attribute or values of the attributes vtasMmtAVVideoCode
and vtasMmtAVAudioCode will be played to the calling party depending upon availability of suitable media streams.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasMmtVideoOnlyCode
=
0
-
This attribute defines which video announcement, without audio, that is to be
played to a party calling an unregistered PUI.
Takes effect: New session
|