| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
vtasCcnl
-
This attribute defines the primary key of VtasCcnl and this section describes the VtasCcnl attributes.
|
VtasDropBackDT |
-
vtasCcnlDropBack
=
USE_OTP_VALUES
-
This attribute defines whether the Virtual Telephony Provider (VTP) want to use the values of the corresponding Operating Telephony Provider (OTP) attributes in MtasCcnl.
When this attribute is set to "Use own values", the initial values of the other attributes in VtasCcnl are all set to the values of the corresponding attributes in MtasCcnl, and the behavior of MTAS for the served users belonging to this VTP is determined by the values of the attributes of VtasCcnl.
When this attribute is set to "Use OTP values", the behavior of MTAS for the served users belonging to this VTP is determined by the values of the attributes of MtasCcnl.
Takes effect: New session
|
MtasCCxxInvocationCodeDT[0..1] |
-
vtasCcnlInvocationCode
-
This attribute defines the code used for inband invocation of the Communication Completion Not Logged-in (CCNL) service.
Observe: This attribute is used by MTAS when requesting the Media Resource Function Processor to collect the CCNL invocation code inband from the caller.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcnlInvokePromptAudioAnn
=
0
-
This attribute is used to specify the code of the audio only announcement that is to be played by the CCNL service when prompting a user to invoke call completion.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcnlInvokePromptAVAudioAnn
=
0
-
This attribute defines the code of the audio component of the audio-video announcement that is to be played by the Communication Completion service, when prompting a user to invoke the CCNL service.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcnlInvokePromptAVVideoAnn
=
0
-
This attribute is used to specify the code of the video component of the audio-video announcement that is to be played by the CCNL service when prompting a user to invoke call completion.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcnlInvokePromptVideoAnn
=
0
-
This attribute defines the code of the video only announcement that is to be played by the CCNL service when prompting a user to invoke call completion.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcnlIvrInvPromptAudioAnn
=
0
-
This attribute defines the code of the audio only announcement that is to be played by the Communication Completion service when IVR is enabled and when a SIP 480 response is received from the terminating side, indicating that CCNL is possible.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcnlIvrInvPromptAVAudioAnn
=
0
-
This attribute defines the code of the audio component of the audio-video announcement that is to be played by the Communication Completion service, when IVR is enabled and when prompting a user to invoke the IVR service.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcnlIvrInvPromptAVVideoAnn
=
0
-
This attribute defines the code of the video component of the audio-video announcement that is to be played by the Communication Completion service, when IVR is enabled and when prompting a user to invoke the IVR service.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcnlIvrInvPromptVideoAnn
=
0
-
This attribute defines the code of the video only announcement that is to be played by the Communication Completion service when IVR is enabled and when a Temporarily Unavailable error response is received from the terminating side, indicating that CCNL is possible.
Takes effect: New session
|
BasicAdmState |
-
vtasCcnlIvrPlayInvPromptAudioAnn
=
LOCKED
-
This attribute defines whether to disable/enable the originating network Call Completion on Not logged-in Invoke Prompt audio announcement when IVR is enabled. This attribute is also used to control the Call Completion Invocation Successful and Call Completion Invocation Failed announcements.
Takes effect: New session
|
BasicAdmState |
-
vtasCcnlIvrPlayInvPromptVideoAnn
=
LOCKED
-
This attribute defines whether to disable/enable the originating network Call Completion on Not logged-in Invoke Prompt video announcement when IVR is enabled. This attribute is also used to control the Call Completion Invocation Successful and Call Completion Invocation Failed announcements.
Takes effect: New session
|
BasicAdmState |
-
vtasCcnlPlayInvokePromptAudioAnn
=
LOCKED
-
This attribute is used to disable/enable the originating network CCNL Invoke Prompt audio announcement. This attribute is also used to control the Call Completion Invocation Successful and Call Completion Invocation Failed announcements.
Takes effect: New session
|
BasicAdmState |
-
vtasCcnlPlayInvokePromptVideoAnn
=
LOCKED
-
This attribute is used to disable/enable the originating network CCNL Invoke Prompt video announcement. This attribute is also used to control the Call Completion Invocation Successful and Call Completion Invocation Failed announcements.
Takes effect: New session
|