| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
vtasUCac
-
This attribute defines the primary key of VtasUCac and this section describes the VtasUCac attributes.
|
BasicAdmState |
-
vtasUCacAdministrativeState
=
LOCKED
-
This attribute defines the administrative state of the User Call Admission Control service is used to lock or unlock the service.
- When UNLOCKED (1), new sessions are subject to User Call Admission Control.
- When LOCKED (0), new sessions are not subject to User Call Admission Control.
Dependencies: The vtasUCacAdministrativeState attribute must not be set to the value 0 (Locked) unless the vtasCwAdministrativeState attribute is set to the value 0 (Locked) or the vtasCwOperateMode attribute is set to 2 (ALTERNATE_MODE_2) or 4 (MOBILE_CW).
Takes effect: New session
|
VtasDropBackDT |
-
vtasUCacDropBack
=
USE_OTP_VALUES
-
This attribute defines whether the Virtual Telephony Provider (VTP) want to use the values of the corresponding Operating Telephony Provider (OTP) attributes in MtasUCac.
When this attribute is set to "Use own values", the initial values of the other attributes in VtasUCac are all set to the values of the corresponding attributes in MtasUCac,
and the behavior of MTAS for the served users belonging to this VTP is determined by the values of the attributes of VtasUCac.
When this attribute is set to "Use OTP values", the behavior of MTAS for the served users belonging to this VTP is determined by the values of the attributes of MtasUCac.
Takes effect: New session
|
MtasString0to100DT
mandatory |
-
vtasUCacFixedTotalCallLimitReason
-
This attribute defines the Reason phrase for Reason header for reject message sent to device because of exceeding the total call limit.
Takes effect: New session
|
MtasResponseCodeDT |
-
vtasUCacFixedTotalCallLimitResponseCode
=
603
-
This attribute defines the Reason code for reject message sent to device because of exceeding the total call limit.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasUCacOrigAudioAnn
=
0
-
This attribute defines the code of the audio only announcement that is to be played if the call is to be rejected by the originating User Call Admission Control service.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasUCacOrigAVAudioAnn
=
0
-
This attribute defines the code of the audio component of the audio-video announcement that is to be played if the call is to be rejected by the originating User Call Admission Control service.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasUCacOrigAVVideoAnn
=
0
-
This attribute defines the code of the video component of the audio-video announcement that is to be played if the call is to be rejected by the originating User Call Admission Control service.
Takes effect: New session
|
BasicAdmState |
-
vtasUCacOrigPlayAudioAnn
=
LOCKED
-
This attribute defines whether to disable or enable the originating User Call Admission Control Service network audio announcement.
Takes effect: New session
|
BasicAdmState |
-
vtasUCacOrigPlayVideoAnn
=
LOCKED
-
This attribute defines whether to disable or enable the originating User Call Admission Control Service network video announcement.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasUCacOrigVideoAnn
=
0
-
This attribute defines the code of the video only announcement that is to be played if the call is to be rejected by the originating User Call Admission Control service.
Takes effect: New session
|
MtasString0to100DT |
-
vtasUCacSimultaneousUsageReason
=
Secondary device already in use
-
This attribute defines the Reason phrase for Reason header for reject message sent to device because of exceeding the simultaneous limit.
Takes effect: New session
|
MtasResponseCodeDT |
-
vtasUCacSimultaneousUsageResponseCode
=
403
-
This attribute defines the Reason code for reject message sent to device because of exceeding the simultaneous limit.
Takes effect: New session
|