1 Introduction
This document lists the information available for the MTAS.
1.1 Library Distribution
Libraries are distributed as follows:
- Online libraries on CAL Store.
1.2 Library Access
How to access the library, refer to How to Get Started with Active Library Explorer.
1.3 Library Structure
The library consists of documents grouped into the following main folders:
- Library Overview
- Product Overview
- Planning
- Installation
- Initial Configuration
- Operation and Maintenance
- Emergency
- Interface
- 3rd Party Products
1.4 Document Types
The documents are grouped into the following three types:
- Descriptive documents contain descriptions of the product on different levels.
- Operational documents give instructions on how to operate or maintain the product.
- Reference documents contain more information to which a user needs to refer.
1.5 Related Information
Trademark information, typographic conventions, definition, and explanation of acronyms and terminology used in this library, refer to the following documents:
2 MTAS Support Library
This section describes the library contents for the MTAS.
2.1 Library Overview
Documents included in this area are listed in Table 1. These documents are intended for all personnel involved in work related to any aspect of the product.
|
Title |
Description |
Type |
|---|---|---|
|
Support Library Overview |
Provides an overview of the library (this document). |
Reference |
|
Explains the terms and acronyms that occur in the library. |
Reference | |
|
Lists the trademarks used in the library. |
Reference | |
|
Describes the typographic conventions used in the library. |
Reference |
2.2 Product Overview
Documents included in this area are listed in Table 2. These documents are intended as an introduction for all personnel who want to learn more about the product.
|
Title |
Description |
Type |
|---|---|---|
|
Information about the commercial features of the product. |
Descriptive | |
|
Contains notices and license documentation related to the Free and Open Source Software (FOSS) that is included in the MTAS |
Descriptive | |
|
Technical description of the products Common features. |
Descriptive | |
|
Descriptive | ||
|
Technical description of the products Conference AS features. |
Descriptive | |
|
Descriptive | ||
|
Descriptive |
2.2.1 Statement of Compliance
Statement of Compliance are listed in Table 3. These documents are intended as an introduction for all personnel who want to learn more about the product.
|
Title |
Description |
Type |
|---|---|---|
|
Detailed information on the MTAS compliance to standards and interfaces. |
Descriptive |
2.3 Operation and Maintenance
Documents included this area are listed in Table 4. These documents are intended as an introduction for personnel involved in any operation and maintenance activity.
|
Title |
Description |
Type |
|---|---|---|
|
Describes the basic features of the Ericsson Command Line Interface (ECLI) and how to use it. |
Descriptive, Operative |
2.3.1 Fault Management
Documents included in this area are listed in Table 5. These documents are intended for personnel performing fault handling, alarm handling, and troubleshooting.
|
Title |
Description |
Type |
|---|---|---|
|
Provides an overview of the management model and concepts associated with the Fault Management managed area. |
Descriptive | |
|
Alarms | ||
|
In this area all alarms are listed. | ||
|
Lists all alarms that the product can receive. |
Reference | |
|
Troubleshooting Information | ||
|
Describes how to use and apply the AppTrace in MTAS. |
Descriptive, Operative | |
|
Describes how to use and apply the NetTrace in MTAS. |
Descriptive, Operative | |
|
Describes the fault codes that are generated by the MTAS. |
Descriptive | |
|
Describes how to use and apply the NetTrace in MTAS. |
Descriptive, Operative | |
|
Describes how to use and apply the NetTrace in MTAS. |
Descriptive, Operative | |
|
Describes how to perform the troubleshooting procedure in the MTAS. |
Descriptive, Operative | |
|
Data Collection | ||
|
Step-by-step instructions required in health check situations. |
Operative | |
2.3.2 Configuration Management
Documents included in this area are listed in Table 6. These documents are intended for personnel performing configuration and fine-tuning. They are also intended for personnel performing provisioning.
|
Title |
Description |
Type |
|---|---|---|
|
Provides information about configuration activities, including procedures and background information. |
Descriptive | |
|
This document describes the Lightweight Directory Access Protocol (LDAP) interface of MTAS. |
Descriptive | |
|
File Management | ||
|
Provides an overview of the management model and concepts associated with the File Management managed area. |
Descriptive | |
|
Transport Management | ||
|
This document provides an overview of the management model and concepts associated with the Virtual IP Address Management managed area. |
Descriptive | |
|
Parameter Information | ||
|
Describes how to select the value of parameters categorized as "Solution Integration" in a multi vendor deployment scenario. |
Descriptive, Operative | |
|
Describes the parameters included in the product. |
Descriptive | |
Documents included in this area are listed in Table 7. These documents are intended for personnel working with configuring and fine tuning. It is also intended for personnel performing provisioning.
|
Title |
Description |
Type |
|---|---|---|
|
Configuration and Provisioning Interwork Description | ||
|
Describes the behavior of the Customer Administration Interface 3rd Generation (CAI3G) protocol (version 1.2) as used by the MTAS. |
Descriptive | |
|
Describes the protocol stack and services in CAI3G interface. |
Descriptive | |
|
Describes the ST AS protocol stack and services in CAI3G interface. |
Descriptive | |
|
Describes the XML schemas used in the MTAS over the Centralized Conferencing Manipulation Protocol (CCMP) interface and explains their structure. |
Descriptive | |
|
Describes the XML schemas defining common types used to ensure consistency across the Ut, Sh, CCMP, and CAI3G interfaces on the MTAS. |
Descriptive | |
|
Describes a set of examples showing the MTAS provisioning requests. Each request provisions the transparent data in the Home Subscriber Server (HSS). |
Descriptive | |
|
Describes a set of examples showing the MTAS ST AS provisioning requests. Each request provisions the transparent data in the Home Subscriber Server (HSS). |
Descriptive | |
|
Describes the XML schemas used in the MTAS to validate the MMTel user, group service data (operator and user parts) and service number data (operator part) and explain their structure. |
Descriptive | |
|
Describes the compliance of the MTAS XDMS against the Ut interface |
Descriptive | |
|
Describes the XML schemas used in the MTAS over the Ut interface and explains their structure. |
Descriptive | |
|
Configuration OPIs and Configuration Data | ||
|
Describes the possible collocated deployments of different Application Server (AS) roles on the same physical MTAS node. |
Descriptive, Operative | |
|
Describes how to configure the Abbreviated Dialing session service in the MTAS. |
Descriptive, Operative | |
|
Describes the Address Policing service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Ad-Hoc Conference service in the MTAS, and its configuration activities. |
Descriptive, Operative | |
|
Describes the AOC service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes how to manage the announcement codes for the MTAS services that play announcements. |
Descriptive, Operative | |
|
Describes the AS Interworking service and how to configure the service. |
Descriptive, Operative | |
|
Describes the Communication Barring service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the User and Group CAC (UCAC and GCAC), and how to configure the service. |
Descriptive, Operative | |
|
Describes the Call Return, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Calling Name Identity Presentation service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Calling Party Category service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes how to configure the GSM Compatible Service Switching Function (SSF) in the MTAS. |
Descriptive, Operative | |
|
Describes the carrier selection-related services in the MTAS and how to configure these services. |
Descriptive, Operative | |
|
This document describes how to configure the Cell Announcement service in MTAS to enable users to receive announcements about originating locations of their mobile equipment by using Supplementary Service Codes (SSC) commands. |
Descriptive, Operative | |
|
Describes how to configure and activate the Accounting Request (ACR) storage function in the MTAS. The ACR storage function is an optional subfunction in the offline charging service in the MTAS. |
Descriptive, Operative | |
|
Describes how to configure and activate charging and communication details transfer in the MTAS. |
Descriptive, Operative | |
|
Describes the CLIR Interwork service in the MTAS, and its configuration activities. |
Descriptive, Operative | |
|
Describes how to configure the Closed User Group service in the MTAS. |
Descriptive, Operative | |
|
Describes the Communication Completion service in the MTAS, and its configuration activities. |
Descriptive, Operative | |
|
Describes the CDIV service in the MTAS, and its configuration activities. |
Descriptive, Operative | |
|
Describes the Communication Waiting service in the MTAS, and its configuration activities. |
Descriptive, Operative | |
|
Describes the CCM service in the MTAS and how to configure the service. |
Descriptive, Operative | |
|
Describes the Customized Alert Tones service in the MTAS, and its configuration activities. |
Descriptive, Operative | |
|
Describes the DNM service in the MTAS and how to configure the service. |
Descriptive, Operative | |
|
Describes how to configure the Distinctive Ring service in the MTAS. |
Descriptive, Operative | |
|
Describes the Emergency Call Notification service in the MTAS and how to configure the service. |
Descriptive, Operative | |
|
Describes how to configure the MTAS Emergency State service in the Multimedia Telephony (MMTel) Application Server (AS). |
Descriptive, Operative | |
|
Describes the ECT service in the MTAS and how to configure the service. |
Descriptive, Operative | |
|
Describes the high level configuration of the neighboring IMS nodes needed for correct operation of the MTAS. It also describes the configuration needed for making use of the specific capabilities of the MTAS. |
Descriptive, Operative | |
|
Describes the Flexible communication Distribution service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the FSFS service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the GM service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Generic Announcement service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Generic Supplementary Service Codes used in the MTAS. |
Descriptive, Operative | |
|
Describes the Hold Communication service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes how to configure the Hotline service in the MTAS. |
Descriptive, Operative | |
|
Describes the Identity Presentation service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes how to configure the IMS Centralized Services functions for the Service Centralization and Continuity AS in the MTAS. |
Descriptive, Operative | |
|
This document describes how to enable and configure IPv6 for the MTAS to its peer nodes. |
Descriptive, Operative | |
|
Describes how to configure the Japanese Charging service in MTAS. |
Descriptive, Operative | |
|
MTAS Malicious Communication Identification Management Guide |
Describes the MCID service in the MTAS, and how to configure the service. |
Descriptive, Operative |
|
Describes how to configure the attributes controlling the MRFC and the Media Resource Function Processor (MRFP). |
Descriptive, Operative | |
|
Describes the basic MMTel service that the MTAS offers to its subscribers. |
Descriptive, Operative | |
|
Describes how to configure the Service Profile data in the MTAS. |
Descriptive, Operative | |
|
Describes the Multiple Languages service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Network Announcement service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes how to configure the Ring Back Tone service in the MTAS. |
Descriptive, Operative | |
|
Describes the node level management of the functions of the MTAS. |
Descriptive, Operative | |
|
Describes the MTAS Number Normalization function. |
Descriptive, Operative | |
|
Describes the NP service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Number Translation service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the operator-controlled transfer service in the MTAS and how to configure the service. |
Descriptive, Operative | |
|
MTAS Originating Calling Name Identity Presentation Management Guide |
Describes the Originating Calling Name Identity Presentation service in the MTAS, and how to configure the service. |
Descriptive, Operative |
|
Describes the Parlay X service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Parlay X in MMTel service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Priority Call service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Scheduled Conference service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Provides a short description of each service in the MTAS, and how to configure these services. |
Descriptive, Operative | |
|
Describes the STOD service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the SND service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes how to configure the SIP in the MTAS. |
Descriptive, Operative | |
|
Describes how to configure the SIP trunking in the MTAS. |
Descriptive, Operative | |
|
Describes how to configure the SIP trunking service in the MTAS. |
Descriptive, Operative | |
|
Describes the SRVCC service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes how to configure the SS7 function in the MTAS. |
Descriptive, Operative | |
|
Describes how to configure the subscriber data function in the MTAS. |
Descriptive, Operative | |
|
Describes how to configure the Supplementary Service Codes in the MTAS to enable users to access and control their supplementary services by using service code commands. |
Descriptive, Operative | |
|
Describes how to configure the Target Handling function in the MTAS. |
Descriptive, Operative | |
|
Describes the Three Party session service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Time-Based Services in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes how to achieve the Toll Restriction feature in the MTAS. |
Descriptive, Operative | |
|
Describes how to configure the XDMS function in the MTAS. |
Descriptive, Operative | |
|
Describes the Video Fallback to Audio service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Video Fallback to Audio service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Describes the Wholesale service in the MTAS, and how to configure the service. |
Descriptive, Operative | |
|
Descriptive, Operative | ||
|
Describes how to configure the ST AS call admission control service. |
Descriptive, Operative | |
|
ST AS Carrier Select Rn and Carrier Pre-Select Rn Management Guide |
Describes the ST AS carrier selection-related services and how to configure these services. |
Descriptive, Operative |
|
Describes how to configure the ST AS communication diversion service. |
Descriptive, Operative | |
|
Describes how to configure the ST AS identity presentation service. |
Descriptive, Operative | |
|
ST AS Malicious Communication Identity Service Management Guide |
Describes the ST AS MCID service, and how to configure the service. |
Descriptive, Operative |
|
Descriptive, Operative | ||
2.3.3 Health Check
|
Step-by-step instructions required in health check situations. |
Operative |
2.3.4 Performance Management
Documents included in this area are listed in Table 9. These documents are intended for personnel involved in performance monitoring.
|
Title |
Description |
Type |
|---|---|---|
|
Provides an overview of the management model and concepts associated with the Performance Management managed area. |
Descriptive | |
|
Describes performance measures and formulas based on available counters in the MTAS with the intention to support the making of PM reports for IMS systems and nodes. |
Descriptive | |
|
Describes MTAS signaling traffic performance indicators intended for PM reports supporting IMS. |
Descriptive |
2.3.5 Scaling Management
Documents included in this area are listed in Table 10. These documents are intended for personnel involved in performance monitoring.
|
Title |
Description |
Type |
|---|---|---|
|
Describes the scalability functions of the MTAS cluster as a distributed system and give instructions how to do expansion or contraction of the cluster by these functions. |
Descriptive |
2.3.6 Security Management
Documents included in this area are listed in Table 11. These documents are intended for personnel performing security tasks, including supervision and user administration. They are also intended for personnel performing hardening of the product.
|
Title |
Description |
Type |
|---|---|---|
|
Provides an overview of the management model and concepts associated with the Security Management managed area. |
Descriptive | |
|
Describes the security functions implemented by MTAS |
Descriptive | |
|
Certificate Management | ||
|
Provides an overview of the management model and concepts associated with the Certificate Management managed area. |
Descriptive | |
2.3.7 Software Management
Documents included in this area are listed in Table 12. These documents are intended for personnel performing preventive maintenance of the software and for personnel involved in troubleshooting. They are also intended for personnel performing backup and restoration.
|
Title |
Description |
Type |
|---|---|---|
|
Provides an overview of the management model and concepts associated with the Software Management managed area. |
Descriptive | |
|
Provides an overview of the management model and concepts associated with the Software Inventory Management managed area. |
Descriptive | |
|
Backup and Restore | ||
|
Provides an overview of the management model and concepts associated with the Backup and Restore managed area. |
Descriptive | |
|
Arwa Management | ||
|
Describes how to connect to the Arwa solution through one of the available communications channels: RSG or HTTPS. |
Descriptive, Operative | |
2.3.8 Managed Object Management
Documents included in this area are listed in Table 13. These documents are intended for personnel performing configuration and fine-tuning.
|
Title |
Description |
Type |
|---|---|---|
|
Describes the Managed Object Model (MOM) and how to use it. |
Descriptive, Operative | |
|
Defines the information model regarding node management. Presents a view of the manageable resources in the node as well as the parameters and actions associated with these resources. |
Descriptive, Operative |
2.4 Emergency
Documents included in this area are listed in Table 14. These documents are intended for personnel authorized to perform an emergency recovery.
|
Title |
Description |
Type |
|---|---|---|
|
Information regarding emergency recovery activities, including procedures and background information. |
Descriptive, Operative |
2.5 Interface
Documents included in this area are shown are listed in Table 15. These documents are intended for personnel needing to understand the logical entity, including interfaces and protocols.
|
Title |
Description |
Type |
|---|---|---|
|
Detailed information regarding the ACR storage interface. |
Descriptive | |
|
Detailed information regarding the Diameter-based Communication Details protocol used by the MTAS. |
Descriptive | |
|
Detailed information regarding the Diameter offline charging and used interfaces. |
Descriptive | |
|
Detailed information regarding the Diameter online charging and used interfaces. |
Descriptive | |
|
Describes the ECLI, including descriptions of all commands, key combinations, error messages, character support, and examples. |
Descriptive, Reference | |
|
Describes the Ericsson Network Configuration (NETCONF) interface, including standard compliance, NETCONF operations, and examples. |
Descriptive, Reference | |
|
Describes the Lightweight Directory Access Protocol (LDAP) authentication and authorization interface. |
Descriptive, Reference | |
|
Detailed information regarding the CAP v2 when the MTAS acts as a SSF. |
Descriptive | |
|
Detailed information regarding the CCMP interface. |
Descriptive | |
|
Defines the proprietary interface used between MTAS and a CDS to enable the transfer of information about communication sessions required for certain supplementary services. |
Descriptive | |
|
Describes the fault codes that are generated by the MTAS. |
Descriptive | |
|
Detailed information regarding H.248 protocol support in the MTAS. |
Descriptive | |
|
Detailed information regarding the CAT-S interaction with the MTAS. |
Descriptive | |
|
Detailed information regarding the ISC, Ma, and Pw interfaces. |
Descriptive | |
|
Detailed information regarding the Mr interface. |
Descriptive | |
|
An XML specification of the MTAS Rf Diameter release 7 interface. |
Descriptive | |
|
An XML specification of the MTAS Rf version 9 (based on 3GPP release 9). |
Descriptive | |
|
An XML specification of the MTAS Rf version 9 (based on 3GPP release 9). |
Descriptive | |
|
An XML specification of the MTAS Ro Diameter interface. |
Descriptive | |
|
An XML specification of the MTAS Ro Diameter interface. |
Descriptive | |
|
An XML specification of the MTAS Ro Diameter interface. |
Descriptive | |
|
Detailed information regarding the NameDb interface. |
Descriptive | |
|
Detailed information regarding the Parlay X interaction with MMTel. |
Descriptive | |
|
Detailed information regarding the Parlay X interface. |
Descriptive | |
|
Describes the 3GPP® compliant Performance Management (PM) XML file format supported in the PM interfaces. |
Descriptive, Reference | |
|
Detailed information regarding the Sh/Dh interface. |
Descriptive | |
|
Events | ||
|
Describes event HeartBeat and how to handle it. |
Descriptive, Operative | |
|
Describes event AlarmListRebuilt and how to handle it. |
Descriptive, Operative | |
|
MTAS Notifications | ||
|
List of notifications that can be sent to the management console of the MTAS node. |
Reference | |
|
Describes the MtasJc, ICBS Data Not Found event. |
Descriptive, Operative | |

Contents