Contents
1 Introduction
This document describes how to delete a backup.
1.1 Prerequisites
This section describes the prerequisites, which must be fulfilled before using the procedure.
1.1.1 Conditions
The following conditions must apply:
- No other backup operation is in progress.
- The backup type is known.
- The name of the backup to delete is known.
- An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.
2 Procedure
To delete a backup:
- Navigate to the BrmBackupManager managed object, for example:
>dn ManagedElement=NODE06ST,SystemFunctions=1,BrM=1,BrmBackupManager=SYSTEM_DATA
- Start the delete operation, for example:
(BrmBackupManager=SYSTEM_DATA)>deleteBackup PERF_BACKUP_NAME1_20140428_175907
The system returns output true or false.
- Verify that the backup was successfully deleted:
(BrmBackupManager=PERF_BACKUP_NAME1_20140428_175907)>show progressReport
After a backup is successfully deleted, the progress report shows the following:
[...] actionName="DELETE" additionalInfo="Delete Backup for PERF_BACKUP_NAME1_20140428_175907:⇒ Succeeded" progressInfo="" progressPercentage=100 result=SUCCESS resultInfo="PERF_BACKUP_NAME1_20140428_175907 was deleted ⇒ successfully." state=FINISHED [...]
If an error occurs during the execution of the operation, attribute reportProgress shows result=FAILURE and resultInfo shows the cause of the failure.
For more information on the progress report, refer to View Progress Report.