| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
mtasCsi
-
This attribute defines the primary key of MtasCsi and this section describes the MtasCsi attributes.
|
BasicAdmState |
-
mtasCsiAdministrativeState
=
LOCKED
-
This attribute is used to set the administrative state of the Circuit Switched Integration (CSI) sub-system. If the administrative state is locked no CAP operations are sent from MTAS
Takes effect: New session
|
MtasDigitString4to15DT
mandatory |
-
mtasCsiGlobalTitle
-
This attribute defines an E.164 number that is used for routing purposes in a SS7 network and can be equal to MSISDN, IMSI or another number.
Dependencies: Can only be changed when the CSI subsystem is locked
Takes effect: New session
|
MtasUint00000to000255DT |
-
mtasCsiRemoteScfSubsystemNumber
=
252
-
This attribute defines the Sub System Number of remote SCF in the SS7 Network to which MTAS sends the INAP IDP (Initial Detection Point) message when MTAS has the role of SSF.
Dependencies: Can only be changed when the CSI subsystem is locked
Takes effect: New session
|
MtasUint00000to000255DT |
-
mtasCsiScfSubsystemNumber
=
252
-
This attribute defines the subsystem number that MTAS will use in the SS7 network when MTAS has the role of a SCF.If MTAS is not acting as SCF, then set the attribute to 0.
Dependencies: Can only be changed when the CSI subsystem is locked
Takes effect: New session
|
MtasUint00000to000255DT |
-
mtasCsiSsfSubsystemNumber
=
251
-
This attribute defines the subsystem number that MTAS will use in the SS7 network when MTAS has the role of a SSF.If MTAS is not acting as SSF, then set the attribute to 0.
Dependencies: Can only be changed when the CSI subsystem is locked
Takes effect: New session
|