Contents

1   Introduction

This document describes how to configure the renewal mode of a node credential.

Certificate Management can be used for performing automatic renewals for the NodeCredential Managed Objects (MOs).

1.1   Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1   Conditions

The following conditions must apply:

• The user has the System Security Administrator role.
• The node credential is installed.
• The new renewal mode for the node credential is known.
• An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

2   Procedure

To configure the renewal mode of a node credential:

1. Navigate to the NodeCredential MO, for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,SecM=1,CertM=1,NodeCredential=1

2. Enter Config mode:

   (NodeCredential=1)>configure

3. Set attribute renewalMode by setting it to manual or automatic as follows:
   • (config-NodeCredential=1)>renewalMode=MANUAL
   • (config-NodeCredential=1)>renewalMode=AUTOMATIC
4. Commit the setting:

   (config-NodeCredential=1)>commit

5. Verify the setting:

   (NodeCredential=1)>show

   The following is an example output:

   CertM=1 [...] renewalMode=AUTOMATIC [...]