| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
mtasSsc
-
This attribute defines the primary key of MtasSsc and this section describes the MtasSsc attributes.
|
BasicAdmState |
-
mtasSscAdministrativeState
=
LOCKED
-
This attribute defines the current administrative state of the MtasSsc MO, and is used to activate or deactivate the SSC function. To activate the SSC service, set the mtasSscAdministrativeState attribute to UNLOCKED (1).
Takes effect: Immediate
|
MtasBooleanDT |
-
mtasSscAllowDefaultPin
=
false
-
This attribute defines if Default PIN is allowed in SSC commands. An exception is Modify PIN command where Default PIN is allowed as old PIN.
Takes effect: New session
|
MtasUint00000to065535DT |
-
mtasSscAnnDefaultPinNotAllowed
=
0
-
This attribute defines the audio announcement code that is to be used when default PIN is detected in SSC command and it is not allowed to be used.
Takes effect: New session
|
MtasUint00000to065535DT |
-
mtasSscAnnFaultyPin
=
0
-
This attribute defines the audio announcement code that is to be used when faulty PIN is detected in SSC command.
Takes effect: New session
|
MtasUint00000to065535DT |
-
mtasSscAnnPinLocked
=
0
-
This attribute defines the audio announcement code that is to be used when PIN is locked for SSC command.
Takes effect: New session
|
MtasString0to032DT
mandatory |
-
mtasSscCfNegActOwnGenAnn
-
This attribute defines the Generic Announcement ID applicable when communication diversion activation to own number error happens. Points to the relevant MtasGaAnn MOC instance
Dependencies: The referred MtasGaAnn MOC instance must exist
Takes effect: New session
|
MtasSscSSCodesVmIntegratedDT |
-
mtasSscCfVmIntegrated
=
SEPARATE
-
This attribute defines whether the Supplementary Service Code (SSC) commands for Communication Forwarding Unconditional to Voice Mail (CFU-VM), Communication Forwarding on Busy to Voice Mail (CFB-VM), Communication Forwarding on No Reply to Voice Mail (CFNR-VM), and Do Not Disturb Communication Forwarding to Voice Mail (DNDCF-VM) are separate from the SSC commands for Communication Forwarding Unconditional (CFU), Communication Forwarding on Busy (CFB), Communication Forwarding on No Reply (CFNR), and Do Not Disturb Communication Forwarding (DNDCF) respectively.
In addition, this attribute also specifies whether the SSC activation commands for Voice Mail and non-Voice Mail service variants create/modify the same rule or separate rules are used.
If the same rule is used by the service variants, when one of them is activated via SSC, the rule of this variant overwrites the rule inserted by the SSC activation of the other variant.
If separate rules are used and both variants are activated via SSC, the order of the variants in the rule set is decided by the CM attribute mtasSscCfVmSeparateRuleOrder.
Dependencies: This attribute must not be set to INTEGRATED (1) unless attribute mtasSscEraseWithDeact has value ERASE_DATA (1).
This attribute must not be set to INTEGRATED (1) if any of the following attributes are not empty:
- mtasSscCfuComSyntDeactVm
- mtasSscCfbComSyntDeactVm
- mtasSscCfnrComSyntDeactVm
- mtasSscDndCfComSyntDeactVm
- mtasSscCfuComSyntIntVm
- mtasSscCfbComSyntIntVm
- mtasSscCfnrComSyntIntVm
- mtasSscDndCfComSyntIntVm
Takes effect: New session
|
MtasSscSSCodesVmSepRuleOrderDT |
-
mtasSscCfVmSeparateRuleOrder
=
NON_VOICEMAIL
-
This attribute defines the order of the two rules in the CDIV rule set when the CM attribute mtasSscCfVmIntegrated is set to value 2 (Separate with separate rules).
Takes effect: New session
|
MtasSupplementaryServiceCodeDT[0..10] |
-
mtasSscComSyntModPin
-
This attribute defines the syntax for service code command for Personal Identification Number (PIN) modification service. It is a list of strings where each string represents one format of the command that is allowed to be used for the change of PIN. The strings include symbols and values defined for command prefix, service codes, separators, supplementary information, and command suffix.
Examples of Supplementary Service Code command syntax see MTAS, Supplementary Service Codes Management USER GUIDE.
Dependencies: Every entry must be distinguished from every other SSC command syntax.
Takes effect: New session
|
MtasSscSSCodesDefaultPinDT[0..1] |
-
mtasSscDefaultPin
-
This attribute defines the Default PIN that can be used in SSC commands if default PIN is allowed.
Dependencies: Mutual dependency to mtasSscLengthOfPin. Length must match unless empty string.
Takes effect: New session
|
MtasSscSSCodesEraseWithDeactDT |
-
mtasSscEraseWithDeact
=
RETAIN_DATA
-
This attribute defines if the supplementary information provided during the activation of the service, for example, new destination number for Communication Forwarding Unconditional (CFU), must be erased during the deactivation.
The attribute is applicable to Communication Forwarding and Anonymous Communication Rejection functions, only.
Dependencies: This parameter must not be set to 0 (Retain data) unless parameter mtasSscCfVmIntegrated has value 0 (Separate) or value 2 (Separate with separate rules).
Takes effect: New session
|
MtasUint00000to065535DT |
-
mtasSscIntComplexActiv
=
0
-
This attribute defines the announcement code that is to be used for successful interrogation of supplementary services to indicate that the service is activated but not necessarily by the service code command.
Takes effect: New session
|
MtasUint00000to065535DT |
-
mtasSscIntComplexDeactiv
=
0
-
This attribute defines the announcement code that is to be used for successful interrogation of supplementary services to indicate that the service is deactivated but not necessarily by the service code command.
Takes effect: New session
|
MtasSscSSCodesLengthOfPinDT |
-
mtasSscLengthOfPin
=
4
-
This attribute defines how many characters (digits) are used for the PIN, New PIN (NPIN), and Old PIN (OPIN).
Dependencies: Mutual dependency to mtasSscDefaultPin. Length must match unless default PIN is empty string.
Takes effect: New session
|
MtasSscSSCodesMaxLenOfNdNumDT |
-
mtasSscMaxLenOfNdNum
=
20
-
This attribute defines the maximum length of the New Destination (ND) number, that is, the maximum number of characters that the ND can consist of.
Takes effect: New session
|
MtasSscSSCodesMaxTimesFaultyPinDT |
-
mtasSscMaxTimesFaultyPin
=
3
-
This attribute defines the max number of times the user is allowed to give faulty PIN in consecutive SSC commands before the next configured release time without causing PIN lock.
Takes effect: New session
|
BasicAdmState |
-
mtasSscMrfpAnnouncements
=
LOCKED
-
This attribute defines if the announcements for supplementary service activation, deactivation and PIN modification are to be played from the MRFP. For service interrogation the announcements are always played from the MRFP.
Takes effect: New session
|
MtasUint00000to065535DT |
-
mtasSscNegAnnCode
=
0
-
This attribute defines the announcement code that is to be used for unsuccessful activation, deactivation and interrogation of supplementary services.
Takes effect: New session
|
MtasBooleanDT |
-
mtasSscPlayEarlyMedia
=
false
-
This attribute defines if announcements shall be played as early media or in an established dialog.
Takes effect: New session
|
MtasUint00000to065535DT |
-
mtasSscPosModAnnPin
=
0
-
This attribute defines the announcement code that is to be used for successful PIN modification operation.
Takes effect: New session
|
MtasSscSSCodesReleasePinLockHourDT |
-
mtasSscReleasePinLockHour
=
0
-
This attribute defines the hour in same time-zone as the node time when subscribers SSC command PIN lock will be released.
Takes effect: New session
|
MtasSupplementaryServiceCodeDT[0..10] |
-
mtasSscVmRetrieveCode
-
This attribute specifies the voicemail retrieve code.
For examples of Supplementary Service Code command syntax see MTAS, Supplementary Service Codes Management USER GUIDE.
Dependencies: Every entry must be distinguished from every other SSC command SSC syntax.
Takes effect: New session
|