| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
mtasLocationFunction
-
This attribute defines the primary key of MtasLocationFunction.
|
MtasString0to255DT[0..1] |
-
mtasLocationFunctionAddress
-
Not Used.This attribute defines the fully qualified domain name of the Geo-location Server (GLS). It can only be used if the mtasLocationFunctionGlsInterface attribute is set to SIP_INTERFACE (0).
Dependencies: It can only be removed if mtasLocationFunctionGlsInterface is set to DIRECT_DATABASE_ACCESS (1).
Specification: Optionally, the string may have a : and <port> appended, where <port> is defined as "0", or 4 to 5 digits forming a number with the highest value 1024:65535. Port = 0 means that a domain name is specified, so the port to use is fetched from DNS with SRV lookup. Numerical IPv6 addresses must be enclosed with brackets for example [1080::8:800:200c:417A]:8080. When port is not specified MTAS uses the 5060 default SIP port. When the port is specified (and not zero) it must be equal to the port number defined in mtasSipRsPort attribute on the Redirect Server node
Takes effect: Not applicable
|
MtasLocFuncDataModelDT |
-
mtasLocationFunctionDataModel
=
GROUP_ORIENTED
-
This attribute defines which data model is used within MTAS. Two data models are defined in MTAS.
- In the first data model each mobile cell contains the mapping from a service (or short) code to a routable destination, and also allows the definition of coverage areas for the different mobile access technologies (UTRAN, GSM, ...) This is called the coverage-oriented model.
- The other model combines the mobile cells into bigger geographical areas, groups. The mappings from service (or short) code to routable destination are stored at group level. This is the group-oriented data model.
Deprecated:
Takes effect: Not applicable
|
MtasLocFuncGlsInterfDT |
-
mtasLocationFunctionGlsInterface
=
DIRECT_DATABASE_ACCESS
-
This attribute defines if location based queries in MTAS are executed over the Redirect Server (SIP based) interface or queries are made directly towards the database.Redirect server is not used.This atribute needs to have always value 1
Deprecated:
Dependencies: It can only be set to SIP_interface (0) if mtasLocationFunctionAddress is defined.
Takes effect: Not applicable
|
MtasLocFuncGlsInterfDT |
-
mtasLocationFunctionRsInterface
=
DIRECT_DATABASE_ACCESS
-
This attribute defines if location based queries in MTAS are executed over the Redirect Server (SIP based) interface or queries are made directly towards the database. Redirect Server is not used this atribute needs to have always value 1.
Dependencies: It can only be set to SIP_interface (0) if mtasLocationFunctionAddress is defined.
Takes effect: Not applicable
|