| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
mtasSrvcc
-
This attribute is the primary key of MtasSrvcc and this section describes the MtasSrvcc attributes.
|
BasicAdmState |
-
mtasSrvccAdministrativeState
=
LOCKED
-
This attribute is used to set/change the administrative state of the Single Radio Voice Call Continuity (SRVCC) service.
- When UNLOCKED (1), SRVCC is active and will be provided to all subscribers.
- When LOCKED (0), the SRVCC service will not be provided.
Dependencies: The mtasSrvccStnSr needs to be set (not empty) before the service can be UNLOCKED (1).
Takes effect: New session
|
BasicAdmState |
-
mtasSrvccAlerting
=
LOCKED
-
This attribute defines the SRVCC support for calls in alerting state in MTAS.
When UNLOCKED (1), calls anchored in SCC AS in alerting state will be subject for access transfer when an INVITE due to access transfer is received from MSC.
It is assumed that all MSC Servers in the network where the UE is registered which can be involved in the SRVCC procedures support SRVCC for calls in alerting phase.
Dependencies: When UNLOCKED (1), the SCC AS URI (mtasSrvccSccAsUri) must be configured and mtasSrvccOriginatingPreAlerting attribute must be disabled before this attribute is disabled(0).
Takes effect: New session
|
MtasString0to255DT[0..1] |
-
mtasSrvccAtuSti
-
This attribute is used to set/change the ATU-STI value (SIP URI or E.164 international number) assigned to the SCC AS node that is used for initiating access transfer using Single Radio Voice Call Continuity.
Dependencies: The value must differ from SCC AS URI (mtasSrvccSccAsUri) and STN-SR (mtasSrvccStnSr).
Takes effect: New session
|
MtasTimerSec00000to000060DT |
-
mtasSrvccByeDelayTime
=
8
-
This attribute is used to set/change the value of the timer that is used to delay the BYE request containing Reason header with protocol "SIP" and reason parameter "cause" with value "503" as defined in 12.3.3.2 in 3GPP TS 24.237.
Takes effect: New session
|
MtasTimerSec00000to000060DT |
-
mtasSrvccCancelDelayTime
=
8
-
This attribute is used in SRVCC to set/change the value of the timer that is used to delay the CANCEL request from PS domain containing Reason header with protocol "SIP" and reason parameter "cause" with value "503" as defined in 3GPP TS 24.237 IMS Service continuity.
Takes effect: New session
|
MtasTimerSec00000to000060DT |
-
mtasSrvccFallbackTime
=
8
-
This attribute is used to set/change the value of the timer that is used to delay the termination of the source access leg in case of successful access transfer using Single Radio Voice Call Continuity procedures as defined in 12.3.1 in 3GPP TS 24.237.
Takes effect: New session
|
MtasSrvccMediaCheckDT |
-
mtasSrvccMediaCheck
=
MEDIA_CHECK_DISABLED
-
This attribute defines the mode of media check during R10 SRVCC access transfer. When disabled, the audio media comparison between negotiated SDP and new SDP offer in the access transfer INVITE from ATCF is skipped. The Full Media Comparision ( FULL_MEDIA_CHECK) shall not be used .
Takes effect: New session
|
MtasSrvccMediaCheckAttributesDT[0..3] nonUnique |
-
mtasSrvccMediaCheckAttributes
-
Not used in this release. This attribute defines the media attributes that shall be compared between currently used media and SRVCC access transfer media.
Dependencies: None
Takes effect: New session
|
MtasSrvccMediaCheckBandwidthDT[0..3] |
-
mtasSrvccMediaCheckBandwidth
-
Not used in this release. This attribute defines the bandwidth types for which the bandwidth value shall be compared between currently used media and SRVCC access transfer media where 0=AS, 1=RS, 2=RR.
Dependencies: None
Takes effect: New session
|
MtasSrvccOriginatingPreAlertingDT |
-
mtasSrvccOriginatingPreAlerting
=
ORIG_PREALERT_SRVCC_DISABLED
-
This attribute defines the SRVCC support for calls in pre-alerting state at originating side in MTAS.
When enabled, calls anchored in SCC AS in pre-alerting state will be subject for access transfer when an INVITE due to access transfer is received from MSC.It is assumed that all MSC Servers in the network where the UE is registered which can be involved in the SRVCC procedures support SRVCC for calls in pre-alerting phase.
Dependencies: mtasSrvccAlerting and mtasSrvccR12Support attributes must be enabled and the SCC AS URI (mtasSrvccSccAsUri) must be configured before enabling this attribute
Takes effect: New session
|
MtasSrvccR12SupportDT |
-
mtasSrvccR12Support
=
SRVCC_3GPP_RELEASE12_SUPPORT_DISABLED
-
This attribute is used to control the backward compatibility of 3GPP release 12 compatible SR-VCC feature support in MTAS.
Takes effect: New session
|
MtasString0to255DT[0..1] |
-
mtasSrvccSccAsUri
-
This attribute is used to set/change the SCC AS URI (SIP URI or E.164 international number) that is used as PSI when transferring additional sessions (held and alerting) during SRVCC access transfer procedure.
Dependencies: The attribute must be set when SCC AS supports SRVCC for mid-call (mtasSrvccMidCall=1), or alerting calls (mtasSrvccAlerting=1). The value must differ from ATU-STI (mtasSrvccAtuSti) and STN-SR (mtasSrvccStnSr).
Takes effect: New session
|
MtasSrvccStnSrDT[0..1] |
-
mtasSrvccStnSr
-
This attribute is used to set/change the STN-SR value assigned to the SCC AS node that is used for initiating access transfer using Single Radio Voice Call Continuity R9 procedures. It must be in E.164 format.
Dependencies: The value must differ from SCC AS URI (mtasSrvccSccAsUri) and ATU-STI (mtasSrvccAtuSti)
Takes effect: New session
|