| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
mtasSipOc
-
Not used in this release. This attribute defines the primary key of MtasSipOc and this section describes the MtasSip Overload Control attributes.
|
MtasUint00000to000200DT |
-
mtasSipOcAbatement
=
75
-
Not used in this release. This attribute defines threshold which MTAS decrements the reported ‘oc’ value periodically while the resource utilization level is below it.
Takes effect: New session
|
BasicAdmState |
-
mtasSipOcAdministrativeState
=
LOCKED
-
Not used in this release. This attribute defines lock or unlock the support of adding OC parameters in Via header of SIP response for SIP Upsteam Overload Control . Possible values are 0 (LOCKED) and 1 (UNLOCKED) Default value is 0 (LOCKED).
Takes effect: New session
|
MtasUint00000to000100DT |
-
mtasSipOcDefDecrStep
=
8
-
Not used in this release. This attribute defines the default step value by which the ‘oc’ will be decreased.
Takes effect: New session
|
MtasUint00000to000100DT |
-
mtasSipOcDefIncrStep
=
12
-
Not used in this release. This attribute defines the default step value by which the ‘oc’ will be increased.
Takes effect: New session
|
MtasUint00000to000200DT |
-
mtasSipOcOnset
=
85
-
Not used in this release. This attribute defines the threshold which MTAS increments the reported ‘oc’ value periodically while the resource utilization level is above it.
Takes effect: New session
|
MtasSipOcRegulationIntervalDT |
-
mtasSipOcRegulationInterval
=
1000
-
Not used in this release. This attribute defines the OC regulation period in ms.
Takes effect: New session
|
MtasSipOcResourceDT[0..64] nonUnique |
-
mtasSipOcResource
-
Not used in this release. This attribute defines the resources and optionally their limits which are considered in overload situation. Format shall be <resource type>[&limit]. Limit is integer from 0-100. Examples: CPU, CPU&80.
The available resource types are described in the MTAS SIP Overload Control Management Guide.
PLEASE BE CAUTIOUS BY OVERRIDING THE DEFAULT VALUES! - it significantly impacts the behavior of the SIP Overload Control feature.
Takes effect: New session
|
MtasSipOcValidityDT |
-
mtasSipOcValidity
=
1500
-
Not used in this release. This attribute defines the OC validity in ms which set as oc-validity in Via header.
Takes effect: New session
|