Cancel Backup and Restore Operation

1	Introduction
1.1	Prerequisites
2	Procedure

1 Introduction

This document describes how to cancel a backup and restore operation.

1.1 Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1 Conditions

The following conditions must apply:

A backup and restore operation is in progress.
The backup and restore name is known.
An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

2 Procedure

To cancel a backup and restore operation:

Navigate to the BrMBackupManager Managed Object (MO), for example:
>dn ManagedElement=NODE06ST,SystemFunctions=1,BrM=1,BrmBackupManager=SYSTEM_DATA
Select the appropriate action:
- Cancel a create operation, delete operation, or import operation: Proceed with Step 3.
- Cancel a restore or export operation: Process with Step 6.
Cancel the create operation, delete operation, or import operation:
(BrmBackupManager=SYSTEM_DATA)>cancelCurrentAction

The system returns output true or false.
Verify that the operation was canceled:
(BrmBackupManager=SYSTEM_DATA)>show -v

Note:
It can be required to enter the command several times until result=SUCCESS is shown in the progress report.
Proceed with Step 9.
Navigate to the BrmBackup MO, for example:
(BrmBackupManager=SYSTEM_DATA)>BrmBackup=PERF_BACKUP_NAME1_20140428_175907
Cancel the restore or export operation:
(BrmBackup=PERF_BACKUP_NAME1_20140428_175907)>cancelCurrentAction

The system returns output true or false.
Verify that the operation was canceled:
(BrmBackup=PERF_BACKUP_NAME1_20140428_175907)>show -v

Note:
It can be required to enter the command several times until state=CANCELLED is shown in the progress report.

After an operation is successfully canceled, the progress report shows the following when a create operation has been canceled:

actionName="CREATE" <read-only>
additionalInfo
   "Cancel Current Action Request was invoked by the ⇒
operator."
[...]
   result=FAILURE <read-only>
   resultInfo="Backup Object [PERF_BACKUP_NAME1_⇒
20140428_175907] was successfully deleted" <read-only>
   state=CANCELLED <read-only>

The progress report shows the following when a delete operation has been canceled:

actionName="DELETE" <read-only>
additionalInfo
   "Cancel Current Action Request was invoked by the ⇒
operator."
[...]
   result=FAILURE <read-only>
   resultInfo="CANCEL_PHASE is completed" <read-only>
   state=CANCELLED <read-only>

The progress report shows the following when an import operation has been canceled:

actionName="IMPORT" <read-only>
additionalInfo
   "Cancel Current Action Request was invoked by the ⇒
operator."
[...]
   result=FAILURE <read-only>
   resultInfo="CANCEL_PHASE is completed" <read-only>
   state=CANCELLED <read-only>

The progress report shows the following when a restore operation has been canceled:

actionName="RESTORE" <read-only>
additionalInfo
   "CANCEL_PHASE is completed"
[...]
   result=FAILURE <read-only>
   resultInfo="CANCEL_PHASE is completed" <read-only>
   state=CANCELLED <read-only>

The progress report shows the following when an export operation has been canceled:

actionName="EXPORT" <read-only>
additionalInfo
   "CANCEL_PHASE is completed"
[...]
   result=FAILURE <read-only>
   resultInfo="CANCEL_PHASE is completed" <read-only>
   state=CANCELLED <read-only>

If an error occurs during the execution of the action, attribute reportProgress shows result=FAILURE and resultInfo shows the cause of the failure.

For more information on the progress report, refer to View Progress Report.