MTAS Operation and Maintenance Guide

MTAS

1	Introduction
1.1	Prerequisites
1.2	Generic Note for Configuration
2	Services
2.1	MMTel AS Services
2.2	SCC AS Services
2.3	ST AS Services
2.4	Network AS Services
2.5	Co-Location of AS Roles
2.6	XML Document Management Server
3	Quality of Service
4	Network Connectivity
4.1	External Network Configuration
4.2	External Network Configuration for SIP Trunking
4.3	IPv6 Configuration
5	MTAS Node Level Management
5.1	Node Management
5.2	Media Control
5.3	MTAS Services
5.4	SIP Management
5.5	SS7 Management
5.6	Subscriber Data Management
5.7	Target Handling Management
5.8	Time Based Services Management
6	Data Collection
7	Health Check
8	Fault Management
9	File Management
10	Performance Management
11	OAM Security Management
12	Software Management
13	System Management
14	System Backup and Restore

1 Introduction

This document acts as an entry point to the operation and maintenance procedures within virtualized MTAS. It specifies the tasks required to operate the system and references the documents needed to complete those tasks.

The tasks are primarily configuration-oriented, but can be ones that must be executed as actions.

The tasks are grouped into functional areas where appropriate, and presented on a functional level rather than managed object level. This allows mapping of a functional need into a set of documents required to achieve that functional need. This document can therefore be considered a functional or task based index to the virtualized MTAS operation and maintenance documentation suite.

1.1 Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedures.

1.1.1 Tools

MTAS provides several Northbound Interfaces (NBIs) for operation and maintenance. The included NBIs are as follows:

NETCONF
The NETCONF interface is a Machine to Machine interface for configuration management of MTAS using the NETCONF protocol. For details, refer to Ericsson NETCONF Interface.
ECLI
The Ericsson Command-Line Interface (ECLI) is a terminal-based command-line interface that allows the user to monitor and manage the MTAS. The ECLI enables the user to interact with the Management Information Base (MIB) through common, generic-purpose commands. For details, refer to Ericsson Command-Line Interface.
SFTP
The SSH File Transfer Protocol (SFTP) is an interface for uploading and downloading files.
SNMP
The Simple Network Management Protocol (SNMP) is an interface for reporting alarms through SNMP notifications.

To access the NBIs, except SNMP, a user must be authenticated and authorized. All user information is stored in a centralized Lightweight Directory Access Protocol (LDAP) server that provides authentication for NBIs. After a user passes the authentication, one or more roles are assigned to this user.

The Role-Based Access Control (RBAC) and the Target-Based Access Control (TBAC) authorization are used to ascertain the user access rights. For details, refer to User Management.

1.2 Generic Note for Configuration

To avoid traffic loss in the services provided by the MTAS, it is mandatory to create backup after any change has been made in the MTAS configuration that is meant to be persistent.

2 Services

The MTAS can fulfill several different functional roles in a Multimedia Telephony solution, such as Multimedia Telephony (MMTel) Application Server (AS), Service Centralization and Continuity Application Server (SCC AS), SIP Trunking Application Server (ST AS), and Network Application Server (NW AS).

These Application Servers provide several services, refer to MTAS Service Management Guide.

The following sections describe tasks that are configurable for the offered services per AS.

2.1 MMTel AS Services

2.1.1 Call Handling

Table 1 lists the configuration-related tasks for call handling.

Table 1 Call Handling Configuration-Related Tasks
Configuring	Function	Reference
Creating service profiles	MMTel Service Profile	MTAS MMTel Service Profiles Management Guide
Setting a user to use service profiles
Service data Operator subscription level service configuration (allowing the subscriber to initiate service profile through the CAI3G protocol)
MMTel administrative state	Basic voice and multimedia communication (MMTel)	MTAS MMTel Management Guide
Wholesale for MMTel
MMTel terminated unregistered behavior
Long duration call supervision Default originating supervision timer Service number-specific supervision timer Destination category Default terminating supervision timer
Service data Operator subscription level service configuration (activating or deactivating the User Common Data subscription, maximum number of targets in the common target list / device list, allowing / disallowing the use of the common device list and the holiday list) Subscriber subscription level service configuration (common target list, common device list, UTC offset, start day of week, non-workday list, holiday list) MMTel no reply timer Charging Reject response configuration Terminal selection Early media announcement Calendar configuration and recommendation for summer/winter time Network or MTAS-provided local ring back









Feature tag processing
Prefix for voice and video calls (routing through BGCF ⁽¹⁾)
Configuration and provisioning options for other services
Media policy (block certain media streams in offered SDP)⁽²⁾)
Control media streams of an established IP Multimedia session Hold Resume Announcement Bandwidth optimization	Hold communication	MTAS Hold Communication Management Guide




Announcement configuration
Wholesale for Hold
Announcement	Communication Diversion (CDIV)	MTAS Communication Diversion Management Guide
Default voicemail address configuration
Additional configuration (response values, timers, blacklist, and so on)
DTM-related configuration
Diversion for SSC
CDIV administrative state
Wholesale for CDIV
Flexible Communication Distribution for CDIV
Suppression by Flexible Service Format Selection (FSFS)
Subscription rules (with examples)
Diversion after BYE
Service data Operator subscription level service configuration Subscriber subscription level service configuration


FCD administrative state	Flexible Communication Distribution (FCD)	MTAS Flexible Communication Distribution Management Guide
Announcement
Auto-answer-avoidance announcement
Distribution to primary devices of the user
Prefixes to specify routing in the network for non-IMS targets
Subscription rules (with examples)
Communication Diversion interaction with FCD
Suppression by FSFS
Wholesale for FCD
FCD to primary devices of the user Node Level Configuration Subscription Level Configuration


Caller preference filtering
Service data Operator subscription level service configuration (maximum number of targets in the target-list, primary number hosting IMS / non-IMS, maximum number of FCD rules, FCD Divert Primary service, allowing the subscriber to control length of the no reply timer, individual conditions, and actions the subscribers can use, no reply timer, list of distribution targets, fixed-target attribute of the list of distribution targets, FCD rules) Subscriber subscription level service configuration (divert-primary, no reply timer, target-list, rules)


FCD in "486 Busy Here" response
CW administrative state	Communication Waiting (CW)	MTAS Communication Waiting Management Guide
Announcement
Communication Diversion interaction with CW
Alerting timer
Operate mode
Wholesale for CW
CW indication
Service data Operator subscription level service configuration Subscriber subscription level service configuration


CC administrative state	Communication Completion (CC)	MTAS Communication Completion Management Guide
Communication Diversion interaction with CC
Initial Filter Criteria in HSS
CC timers
CC notifier-configured minimum
Announcements
Additional configuration Invocation code Suspend resume Retain Separate timers for busy subscriber and no reply




Interactive Voice Recognition (IVR) specific attributes
Wholesale for CC
Service data Operator subscription level service configuration

3PTY administrative state	Three Party Call (3PTY)	MTAS Three Party Management Guide
3PTY factory URI (subdomain-based PSI)
Suppression by FSFS
Wholesale for 3PTY
Service data Operator subscription level service configuration

Conference administrative state	Ad-hoc Conference	MTAS Ad-hoc Conference Management Guide
Answer confirmation
AS chaining (maximum number of sessions)
Ad-hoc Conference configuration Conference factory URI Username prefix part of the conference URI ISC port on the originating S-CSCF⁽³⁾ Conference notifications activated / deactivated Conference focus allowing invitation of Conference Participants using URI list Answer Confirmation announcement DTMF response in Answer Confirmation function







Wholesale for Ad-hoc Conference
Service data Operator subscription level service configuration (maximum number of participants allowed, Answer Confirmation enabled / disabled)

ECT administrative state	Explicit Communication Transfer (ECT)	MTAS Explicit Communication Transfer Management Guide
Suppression by FSFS
Wholesale for ECT
Service data Operator subscription level service configuration

STOD administrative state	Session Transfer to Own Device (STOD)	MTAS Session Transfer to Own Device Management Guide
Auto-Answer Avoidance
Suppression by FSFS
Subscription rules (with examples)
Wholesale for STOD
Session timer
Service data Operator subscription level service configuration (list of destination targets, fixed-target attributes of the list if destination targets, maximum number of targets in the target-list, STOD rules, maximum number of STOD rules) Subscriber subscription level service configuration (target-list, target, rules)


OCT administrative state	Operator Controlled Transfer (OCT)	MTAS Operator Controlled Transfer Management Guide
OCT configuration Phone numbers that can be assisted by the OCT Operator-named announcements Associated Number string in the Service-Specific-Data AVP for online charging



Announcement
Call Return administrative state	Call Return	MTAS Call Return Management Guide
Call Return configuration Saving last incoming call Operator named announcements Code to press to make a callback Auto-callback timer Time to wait parameters related to the code for making a callback





Announcement
Wholesale for Call Return
Auto callback
Service data Operator subscription level service configuration

Hotline administrative state	Hotline	MTAS Hotline Service Management Guide
Announcements
Wholesale for Hotline
Service data Operator subscription level service configuration (Hotline service activation flag, unconditional Hotline activation flag, Hotline number for Unconditional Hotline, Instant Hotline activation flag, Hotline number for Instant Hotline, Delayed Hotline activation flags, Hotline number for Delayed Hotline, called number used for Delayed Hotline to override the service code CM parameter) Subscriber subscription level service configuration (activating / deactivating the Hotline subscription, setting Hotline number (redirection URI) used for Delayed Hotline, setting called number used for Delayed Hotline to override the service code CM attribute)

(1) Breakout Gateway Control Function (BGCF)

(2) Session Description Protocol (SDP)

(3) Serving Call Session Control Function (S-CSCF)

2.1.2 Communication Barring and Address Policing

Table 2 lists the configuration-related tasks for Communication Barring (CB) and Address Policing.

Table 2 Communication Barring and Address Policing Configuration-Related Tasks
Configuring	Function	Reference
CB administrative state	Communication Barring	MTAS Barring and Dial Plan Services Management Guide
Barring rules
User barring category (create, modify, delete)
Operator barring category (create, modify, delete)
Localness barring categories (modify)
Barring program in single scheme (create, modify, delete)
Barring program in multiple schemes (create, modify, delete)
Global white list Modify the list of numbers included in ICB⁽¹⁾ global white list Modify the list of numbers excluded in ICB global white list Modify the list of domains included in ICB global white list



Dynamic Black List
Announcement
SIP error response codes from MTAS configuration
Cause value
Wholesale for CB
Subscription rules
Service data Operator subscription level service configuration (barring rules, barring programs, operator barring programs, Dynamic Black List) Subscriber subscription level service configuration (barring rules, barring programs)


Dial Plan administrative state	Dial Plan	MTAS Barring and Dial Plan Services Management Guide
Dial Plan configuration Modify the list of numbers included in nodal Dial Plan Modify the list of numbers excluded from nodal Dial Plan Modify the list of domains included in nodal Dial Plan



Per-VTP Dial Plan Create Modify the list of numbers included in per-VTP Dial Plan Modify the list of numbers excluded in per-VTP Dial Plan Modify the list of domains included in per-VTP Dial Plan




National Toll Restriction	Toll Restriction	MTAS Toll Restriction Management Guide
International Toll Restriction	Toll Restriction	MTAS Toll Restriction Management Guide
MCID administrative state	Malicious Communication Identification (MCID)	MTAS Malicious Communication Identification Management Guide
Reporting method (CDS / local storage)
CDS configuration
Closure of ACR files for local storage
Disk full and disk not full percentage levels
File transfer
Access rights to log files and directories
Announcement
Wholesale for MCID
Service data Operator subscription level service configuration (permanent mode / temporary mode)

Long-distance Mobile Number Policing administrative state	Address Policing	MTAS Address Policing Management Guide
Additional configuration National Dialing Prefix for Address Policing Length of a fixed number for Long-distance Mobile Number Policing Length of a mobile number for Long-distance Mobile Number Policing Announcement to play if Long-distance Mobile Number Policing rejects a call




Wholesale for Long-distance Mobile Number Policing
Default values for CCC⁽²⁾ or MCC⁽³⁾	CCM⁽⁴⁾	MTAS Country Code Mapping Management Guide

(1) Incoming Communication Barring (ICB)

(2) Country Calling Code (CCC)

(3) Mobile Country Code (MCC)

(4) Country Code Mapping (CCM)

2.1.3 Number Handling

Table 3 lists the configuration-related tasks for number handling.

Table 3 Number Handling Configuration-Related Tasks
Configuring	Function	Reference
Abbreviated Dialing administrative state	Abbreviated Dialing	MTAS Abbreviated Dialing Management Guide
Supplementary Service Codes (SSC)
Wholesale for Abbreviated Dialing
Service data Operator subscription level service configuration (provisioning / withdrawing the Abbreviated Dialing subscription, managing list of Abbreviated numbers, and the stored numbers) Subscriber subscription level service configuration (activating / deactivating the Abbreviated Dialing subscription)


SND administrative state	Short Number Dialing (SND)	MTAS Short Number Dialing Management Guide
Announcement
Number Normalization data
SND domains
Wholesale for SND
Behavior of the Number Normalization Common Component Removal of Phone-Context in the URI Which context used to normalize the URI	Number Normalization	MTAS Number Normalization Management Guide


Localness exemption
DNM administrative state	Dialed Number Mapping (DNM)	MTAS Dialed Number Mapping Management Guide
Method to access the database configuration
Additional configuration Generic announcement names Areas forbidden for local format / NPA National level call processing NPAs in transition area, Call accept / reject policy Fix device support in DNM Operator named announcement







DNM location data Group-centric DNM location data
DNM location data Group-centric DNM location data
DNM-specific number translation data Profile Rules


Number Translation administrative state	Number Translation Service	MTAS Number Translation Management Guide
Wholesale for Number Translation
Additional configuration (mechanism to load and cache the data)
Number Translation profile
Translation rules
Activation mechanism
Carrier Pre-Select administrative state	Carrier Pre-Select	MTAS Carrier Select and Carrier Pre-Select Management Guide
Call type
Local operator call type and number
Carrier operator call type and number
Service data Operator subscription level service configuration

Carrier Pre-Select Rn administrative state	Carrier Pre-Select Rn	MTAS Carrier Select and Carrier Pre-Select Management Guide
Carrier
Test numbers
Service data Operator subscription level service configuration

Carrier Select administrative state	Carrier Select	MTAS Carrier Select and Carrier Pre-Select Management Guide
Announcement
Carrier Select IMS Common Component data
Number Analysis IMS Common Component data
Service data Operator subscription level service configuration

Carrier Select Rn administrative state	Carrier Select Rn	MTAS Carrier Select and Carrier Pre-Select Management Guide
Carrier
Carrier Select Codes
Service data Operator subscription level service configuration
SSC for the Cell Announcement service Command syntax to parse the SSC code Dialed string value	Cell Announcement	MTAS Cell Announcement Management Guide
Cell announcements Segmented announcements Order of segmented announcement Announcement segment
Service data Operator subscription level service configuration

2.1.4 Identity Handling

Table 4 lists the configuration-related tasks for identity handling.

Table 4 Identity Handling Configuration-Related Tasks
Configuring	Function	Reference
Identity Presentation administrative state	Identity Presentation	MTAS Identity Presentation Management Guide
DNS
Additional configuration Time-out for the query to the Calling Name Server When to query to the Calling Name Server Screening and denormalization of the From header Copying of the Request URI to the To header




Wholesale for Identity Presentation
CNIP administrative state
OCNIP administrative state
Multi-Subscriber Number (MSN) administrative state
Reason for lack of caller identity
OCNIP mode
Use of From header
Removal of Privacy header
Service data Operator subscription level service configuration (subscription options for OIP / OIR / TIP / TIR / CNIP / FIP / OCNIP) Subscriber subscription level service configuration (user level configuration of OIP / OIR / TIP / TIR / CNIP / FIP)


Activation / deactivation / modification of CNIP service	Calling Name Identity Presentation (CNIP)	MTAS Calling Name Identity Presentation Management Guide
Modification of CNIP protocol Calling Name Server address CNIP time-out Names of Cname Private headers Default display name Privacy display name Query to the Calling Name Server with OIR overrides







Calling Name Server redundancy (DNS-based redundancy for SIP and SOAP/HTTP protocols)
IP protocol version of the SOAP interface
Activation / deactivation / modification of OCNIP service	Originating Calling Name Identity Presentation (OCNIP)	MTAS Originating Calling Name Identity Presentation Management Guide
Activation / deactivation of OCNIP or CNIP service	Calling Name Identity Presentation for Cname	MTAS Calling Name Identity Presentation Management Guide for Cname
Modification of OCNIP or CNIP mode
Modification of CNIP protocol
Modification of Calling Name Server address
Modification of CNIP Time-out
Modification of names of Cname Private headers Name of Replacement Address header Names of Transparent headers
Calling Name Server redundancy
IP protocol version of Cname interface
Modification of default display name
Modification of privacy display name
Modification of OIR override skip query

2.1.5 Charging

Table 5 lists the configuration-related tasks for charging.

Table 5 Charging Configuration-Related Tasks
Configuring	Function	Reference
AoC administrative state	Advice of Charge (AoC)	MTAS Advice of Charge Management Guide
Additional configuration Time interval between AoC-During updates Default address of the online charging Secondary address of the online Charging Server Unique identification of the application starting the request Behavior if the MTAS cannot provide the cost and applicable tariff





Wholesale for AoC
Service data Operator subscription level service configuration (activating / deactivating the AoC (AoC-S, AoC-D, AoC-E) subscription, control of the AoC service, setting the preferred currency of the subscribers)

NP administrative state	Number Portability (NP)	MTAS Number Portability Management Guide
Additional configuration Enabling NP Disabling NP NP lookup and conveying NP-related info to the charging system



Wholesale for NP
Diameter stack Own node configuration Neighbor node configuration Realm Routing Table configuration Charging application routing configuration	Charging	MTAS Charging Management Guide




Charging profile Creating / configuring / deleting Presence of AVPs in ACR/CCR messages Optional ACR and CCR event messages Charging profile for SCC AS




Activating charging for a service
Deactivating charging For all services For a specific service For services using a specific charging profile



Deactivating charging destinations (starting / revoking)
Default CDF address (adding / removing)
CDS addresses (adding / removing)
Charging attributes
Communication details transfer attributes
Ro announcement mapping (creating / deleting)
Ro language mapping (creating / deleting)
JC administrative state	Japanese Charging (JC)	MTAS Japanese Charging Management Guide
Interconnection Charge Billing System (ICBS) database
Wholesale for JC
Service data Operator subscription level service configuration (provisioning the home location in user common data)

Enabling ACR Storage	Charging ACR Storage	MTAS Charging ACR Storage Management Guide
Defining closure of ACR files
Defining disk full and disk not full percentage levels
Access rights to log files and directories

2.1.6 Call Admission Control

Table 6 lists the configuration-related tasks for Call Admission Control.

Table 6 Call Admission Control Configuration-Related Tasks
Configuring	Function	Reference
UCAC administrative state	User Call Admission Control (UCAC)	MTAS Call Admission Control Management Guide
Suppression by FSFS
Announcement
Wholesale for UCAC
Service data Operator subscription level service configuration (activating / deactivating UCAC service)

GCAC administrative state	Group Call Admission Control (GCAC)	MTAS Call Admission Control Management Guide
Suppression by FSFS
GCAC Category Creating / modifying / deleting a Group Profile Category

GCAC Profile Creating / deleting a Group Profile
GCAC Profile Creating / deleting a Group Profile
Connection allocation Creating / modifying / deleting a connection allocation

Resetting GCAC counts
Initial Filter Criteria for subscribers with GCAC service configuration
Announcement
Additional configuration Counting sessions directly between 2 members of the same CAC group Counting sessions diverted by the served user


Wholesale for GCAC
Service data Operator subscription level service configuration (activating / deactivating GCAC service) Group and profile relationship, category and connection allocation

2.1.7 Multiple Numbers

Table 7 lists the configuration-related tasks for multiple numbers.

Table 7 Multiple Numbers Configuration-Related Tasks for
Configuring	Function	Reference
DR administrative state	Distinctive Ring (DR)	MTAS Distinctive Ring Management Guide
Service data Operator subscription level service configuration (activating / deactivating DR service subscription) Subscriber subscription level service configuration

2.1.8 Interworking

Table 8 lists the configuration-related tasks for interworking.

Table 8 Interworking Configuration-Related Tasks
Configuring	Function	Reference
GM administrative state	Gateway Model (GM)	MTAS Gateway Model Management Guide
GM mode	Gateway Model (GM)	MTAS Gateway Model Management Guide
FSFS administrative state	Flexible Service Format Selection (FSFS)	MTAS Flexible Service Format Selection Management Guide
Suppression of configurable services Communication Barring (CB) Communication Diversion (CDIV) Flexible Communication Distribution (FCD) Customized Alerting Tones (CAT) Call Admission Control (CAC) Session Transfer to Own Device (STOD) Explicit Communication Transfer (ECT) 3PTY (Three-party)








Additional configuration Session case where the pattern is applied Headers in the incoming `INVITE` message where the pattern is applied Regular expression used for matching one parameter in the incoming `INVITE` message Indication of matched parameter removal from the header in the `INVITE` message after the match Algorithm being used by the FSFS service to evaluate the header FSFS service format to be used when there is a match List of suppressed services List of URI addresses dedicated for voicemails servers








Wholesale for FSFS
Video Fallback to Audio administrative state	Video Fallback to Audio	MTAS Video Fallback to Audio Management Guide
Q.850 cause code triggering fallback call
Wholesale for Video Fallback to Audio
AS Interworking administrative state	Application Server Interworking	MTAS Application Server Interworking Management Guide
History-Info and Diversion header handling
Session In Progress mapping handling
CLIR administrative state	CLIR⁽¹⁾) Interworking	MTAS CLIR Interworking Management Guide
History-Info and Diversion header handling
Session In Progress mapping handling

(1) Calling Line Identification Restriction (CLIR)

2.1.9 Call Prioritization

Table 9 lists the configuration-related tasks for call prioritization.

Table 9 Call Prioritization Configuration-Related Tasks
Configuring	Function	Reference
Priority Call administrative state	Priority Call	MTAS Priority Call Management Guide
Wholesale for Priority Call
Service data Operator subscription level service configuration (allowing / disallowing subscriber to initiate Priority Call)

Priority Services administrative state	Priority Services	MTAS Priority Services Management Guide
Priority Call termination on low credit	Priority Services	MTAS Priority Services Management Guide
CPC administrative state	Calling Party Category (CPC)	MTAS Calling Party Category Management Guide
Wholesale for CPC
Service data Operator subscription level service configuration (activating / deactivating CPC service, assigning CPC values per subscriber)

2.1.10 Tone and Announcement Management

Table 10 lists the configuration-related tasks for tone and announcement.

Table 10 Tone and Announcement Configuration-Related Tasks
Configuring	Function	Reference
NA administrative state	Network Announcement (NA)	MTAS Network Announcement Management Guide
Originating MTAS audio-video announcement code for a specific SIP error code
Terminating MTAS audio-video announcement code for a specific SIP error code
Audio announcement code for a specific SIP URI
SIP error response codes from MTAS
Q.850 cause value and corresponding cause code
Wholesale for NA
Announcement codes and announcement names for services Call Admission Control Call Return Carrier Select Communication Barring Communication Completion Communication Diversion Communication Waiting Flexible Communication Distribution Generic Announcement Hold Communication Multimedia Telephony Network Announcement Parlay X Short Number Dialing Supplementary Service Codes	Announcement	MTAS Announcement Management Guide















Definitions Audio announcement played Audio-video announcement or video announcement played Which audio-only announcement played Which video-only announcement played Audio component of an audio-video announcement Video component of an audio-video announcement Q.850 cause value	Generic Announcement	MTAS Generic Announcement Management Guide







Wholesale for Generic Announcement
CAT administrative state	Customized Alerting Tones (CAT)	MTAS Customized Alerting Tones Management Guide
Suppression by FSFS
Additional configuration for CAT CAT signals are started on 183 Session Progress Timer for starting the CAT signal without SIP response messages Black Hole IPv4 address (0.0.0.0) is used in the SDP offer Maintaining single SIP dialog towards the caller when no-fork directive is set in the Request-Disposition header of the received `INVITE` Timer for triggering ring tone generation Enabling support of end-to-end negotiation of SIP Preconditions SIP headers to be sent to CAT-S Suppressing the early media from the called party Suppressing CAT when the called user is roaming in CS









Service data Operator subscription level service configuration (activating / deactivating CAT service subscription)

External CAT-S Creating an additional media resource Address of the additional media resource Type of the additional external media resource Enabling additional media resource




Creating a CAT server and enabling the CAT service
RBT administrative state	Ring Back Tone (RBT)	MTAS Network Provided Ring Back Tone Management
RBT announcements
Early media suppression
Suppressing RBT
Wholesale for RBT

2.1.11 Third-Party Service Interaction

Table 11 lists the configuration-related tasks for third-party service interaction.

Table 11 Third-Party Service Interaction Configuration-Related Tasks
Configuring	Function	Reference
Call notification	Parlay X	MTAS Parlay X Management Guide
Third-party call
Changing local port
IP protocol version
Circuit Switched Integration (CSI) and Northbound Call Control (NCC) administrative state	Parlay X in MMTel	MTAS Parlay X in MMTel Management Guide
Parlay X in MMTel administrative state
Service data Operator subscription level service configuration (activating / deactivating Parlay X in MMTel service subscription, DNS, Northbound Call Control, Parlay X triggers)

Administrative states for GSM Compatible SSF	GSM Compatible Service Switching Function (SSF)	MTAS CAPv2 Management Guide
Circuit Switched Integration (CSI) Administrative state Subsystem number MTAS uses in the SS7 network when MTAS has the role of an SSF Global title MTAS is assigned in the SS7 network



Northbound Call Control (NCC) Administrative state URI path for the Playcol announcement files on the MRFP


SS7 configuration

2.1.12 Language

Table 12 lists the configuration-related tasks for languages.

Table 12 Languages Configuration-Related Tasks
Configuring	Function	Reference
MLS administrative state	Multiple Languages (MLS)	MTAS Multiple Languages Management Guide
Announcement
Segmented Announcements (both for Mp and Mr interfaces)
Mp interface (embedded MRFC⁽¹⁾), except Segmented Announcements
Mr interface (External MRFC)
Service data Operator subscription level service configuration (language-tag)

(1) Media Resource Function Controller (MRFC)

2.1.13 Emergency Call Handling

Table 13 lists the configuration-related tasks for emergency call handling.

Table 13 Emergency Call Handling Configuration-Related Tasks
Configuring	Function	Reference
Emergency Call charging profile configuration	Emergency Call Notification	MTAS Emergency Call Notification Management Guide
Emergency State administrative state	Emergency State	MTAS Emergency State Management Guide
Emergency Callback window time-outs	Emergency State	MTAS Emergency State Management Guide

2.1.14 Closed User Group

Table 14 lists the configuration-related tasks for Closed User Group.

Table 14 Closed User Group Configuration-Related Tasks
Configuring	Function	Reference
CUG administrative state	Closed User Group (CUG)	MTAS Closed User Group Management Guide
CUG rejects announcement
Wholesale for CUG
Service data Operator subscription level service configuration

2.1.15 Wholesale

Table 15 lists the configuration-related tasks for Wholesale.

Table 15 Wholesale Configuration-Related Tasks
Configuring	Function	Reference
Wholesale administrative state	Wholesale	MTAS Wholesale Support Management Guide
Tables and activation for VTP-controlled dial plan Activation state (setting and monitoring) Scheduling activation Dropback attribute



VTP-controlled dial plan Creating MtasVtp Modifying list of numbers included in VTP Modifying list of numbers excluded from VTP Modifying list of domains included in VTP




Announcement

2.1.16 Supplementary Service Codes

Table 16 lists the configuration-related tasks for Supplementary Service Codes (SSCs).

Table 16 Supplementary Service Codes Configuration-Related Tasks
Configuring	Function	Reference
SSC codes administrative state	Supplementary Service Codes (SSC)	MTAS Supplementary Service Codes Management Guide
SSC attributes (modify)
Announcement
Additional configuration Exact length of a PIN Maximum length of the New Destination (ND) number Announcements for Supplementary Service activation, deactivation, and PIN modification Erasing service data during deactivation Command syntaxes (separate or integrated) Dynamic Black List update method SSC service playing announcements on early media or on established sessions







Wholesale for SSC
Communication Forwarding SSC Attributes
Service data Operator subscription level service configuration (activating / deactivating the SSC service subscription, if PIN required for the subscriber control procedures, initial PIN)

Service code command syntax attributes (with examples)
GenSSC commands use of simple schema composite configuration using task pattern Composite configuration including pre-processing logic and various use cases composite configuration for MSN support PIN employment	Generic Supplementary Service Codes (GSSC)	MTAS Generic Supplementary Service Codes Management Guide





Troubleshooting command configuration GenSSC adapter GenSSC servlet

2.1.17 Dialog Event Subscription and Notification

Table 17 lists the configuration-related tasks for dialog event subscription and notification.

Table 17 Dialog Event Subscription and Notification Configuration-Related Tasks
Configuring	Function	Reference
DEN administrative state	Dialog Event Notifier (DEN)	MTAS Dialog Event Notifier Management Guide
DEN timers (minimum / maximum / default values)
DEN XML elements
Maximum number of the subscription sessions
Wholesale for DEN

2.1.18 Voicemail

Table 18 lists the configuration-related tasks for voicemail.

Table 18 Voicemail Configuration-Related Tasks
Configuring	Function	Reference
Default voicemail address	Voicemail	MTAS Voice Mail Management Guide
Service data Operator subscription level service configuration (activating / deactivating the CDIV and voicemail services subscriptions)	Voicemail	MTAS Voice Mail Management Guide

2.2 SCC AS Services

Table 19 lists the configuration-related tasks for SCC AS services.

Table 19 SCC AS Services Configuration-Related Tasks
Configuring	Function	Reference
SCC administrative state	IMS Centralized Services (ICS)	MTAS IMS Centralized Services Management Guide
Charging profile for the SCC AS
HSS ⁽¹⁾ deployment mode in SCC AS
Mix of VoLTE and 2G/3G
Policy for Network Provided Location Information (NPLI) retrieval
Caching of registered contacts information
GSM compatible SCF configuration Enabling / disabling SS7 with CAP	Service Domain Selection (SDS)	MTAS IMS Centralized Services Management Guide


SDS administrative state
Additional configuration IMRN range, first and last number Lifetime of an allocated IMRN IMRN prefix to be added to called party for T-SDS CAMEL SCF service keys supported by SCC AS gsmSCF CAP error handling policy in SCC AS gsmSCF, to return CAP Continue or CAP error Policy for selecting called party number in CAP InitialDP for O-SDS calledPartyNumber or calledPartyBCDNumber precedence Served HPLMN International access prefix / national trunk prefix at served HPLMN








Conditional anchoring based on supported media call types Enabling the check for media call List of media call types supported by SCC AS gsmSCF Default video type	Service Domain Selection (SDS)	MTAS IMS Centralized Services Management Guide



Conditional anchoring based on roaming service profiles Enabling the check for service profile MCC.MNC for HPLMN served by SCC AS Mapping from SCF service key to service profile Service profile defining if anchoring is allowed Anchoring indication for a service profile Reference to a VPLMN whitelist for the service profile Whitelist name VPLMNs from which IMS anchoring is allowed for this whitelist








Conditional anchoring based on local numbers and escape code CC of served HPLMN International access prefix / national trunk prefix at served HPLMN List of local numbers at served HPLMN Escape code for the served HPLMN Escape code allowed when at home MCC.MNC for a VPLMN CC of a VPLMN International access prefix / national trunk prefix at a VPLMN List of local numbers at a VPLMN









T-ADS administrative state	Terminating Access Domain Selection (T-ADS)	MTAS IMS Centralized Services Management Guide
Additional configuration How long the last terminated VoLTE session details can be used Timer to be used in the HSS query for T-ADS information Prefix to be added to called party in call breakout to CS Prefix to be added to calling party in call breakout to CS Timer to be used when waiting for response (18x) from VoLTE UE on PS Routing Number for the Request-URI rn parameter when breaking out a call to CS SIP error codes / error code ranges which cause T-ADS to execute a CS breakout when call delivered to PS contact fails SIP error codes / error code ranges / optionally SIP cause codes, which cause T-ADS service to execute a CS breakout when call delivered to CS contact fails Selection policy to retry with CS breakout when call delivered to PS/CS contact fails or not Policy when breakout to CS is selected, CSRN based on prefix or on the MSRN as obtained from HSS/HLR Indication to suppress tone generation to be added in the INVITE to MSC when the served user is not roaming Enabling / disabling Wi-Fi calling support












CSI administrative state	Terminating Access Domain Selection (T-ADS)	MTAS IMS Centralized Services Management Guide
GMSC role Subsystem number for SCC AS in the SS7 network Global Title Indicator (GTI) in MAP messages Translation Type (TT) Nature of Address Indicator (NAI) Numbering Plan (NP) Encoding Scheme (ES) Signaling network standard (ITU / ANSI)







SS7 with ETSI MAP
SRVCC administrative state	Single Radio Voice Call Continuity (SRVCC)	MTAS SRVCC Management Guide
Additional configuration Session Transfer Number for SRVCC (STN-SR) value assigned to the SCC AS Access Transfer Update Session Transfer Identification (ATU-STI) for SRVCC value assigned to the SCC AS Timer used to delay the BYE request containing Reason header with protocol "SIP" and reason parameter "cause" with value "503" (3GPP TS 24.237) Timer used to delay the termination of the source access leg in successful access transfer using SRVCC procedures (3GPP TS 24.237) Support for SRVCC of calls in alerting state in MTAS Timer used to delay the CANCEL request from PS domain containing Reason header with protocol "SIP" and reason parameter "cause" with value "503" (3GPP TS 24.237) Mode of media check during R10 SRVCC access transfer

(1) Home Subscriber Server (HSS)

2.3 ST AS Services

For correct operation of the ST AS, the high–level configuration of the neighboring IMS nodes is described in MTAS External Network Configuration for SIP Trunking (see also Section 4.2 External Network Configuration for SIP Trunking).

Table 20 lists the configuration-related tasks for ST AS services.

Table 20 ST AS Services Configuration-Related Tasks
Configuring	Function	Reference
ST services activation Activating ST AS Activating ST service	SIP Trunking Application Server (ST AS) services	MTAS SIP Trunking Service Management Guide
ST services deactivation Deactivating ST AS immediately Deactivating ST services (immediately / gracefully)
ST services parameters configuration
ST AS administrative state	SIP Trunking Application Server (ST AS)	MTAS SIP Trunking Management Guide
Transit function address
SIP trunking charging profile reference
Feature tag handling
No reply timer
Access control profile PBX route error definition PBX route error guard timer PBX route out of order timer ST SIP port
ST CAC administrative state	ST Call Admission Control (ST CAC)	ST AS Call Admission Control Management Guide
ST CAC counts reset (per PBX)
Announcement
Service data Operator subscription level service configuration (activating / deactivating the ST CAC service subscription for the PBX, setting CAC limits)

ST Carrier Select Rn administrative state	ST Carrier Select Rn	ST AS Carrier Select Rn and Carrier Pre-Select Rn Management Guide
ST carrier selection reason codes (Q.850 reason code for a congestion situation)
ST Carrier Select Rn Carrier Access Code
ST Carrier Select Rn Carrier Select Code
ST Carrier Select Rn carrier identity
ST Carrier Select Rn carrier name
ST Carrier Rn
ST Carrier Rn domain
ST Carrier Rn disallowed destinations
Service data Operator subscription level service configuration (activating / deactivating ST Carrier Select Rn service)

ST Carrier Pre-Select Rn administrative state	ST Carrier Pre-Select Rn	ST AS Carrier Select Rn and Carrier Pre-Select Rn Management Guide
ST Carrier Pre-Select test number for remote preselection
Service data Operator subscription level service configuration (activating / deactivating ST Carrier Pre-Select Rn service)

ST CB administrative state	ST Communication Barring (ST CB)	ST AS Communication Barring Service Management Guide
ACR display name evaluation
Operator barring category (create, modify, delete)
Localness barring categories (modify)
Global white list Modify list of numbers included in ICB global white list Modify list of numbers excluded in ICB global white list Modify list of domains included in ICB global white list



Generic announcement name
Service data Operator subscription level service configuration (barring rules, operator barring programs)

ST CDIV administrative state	ST Communication Diversion (ST CDIV)	ST AS Communication Diversion Management Guide
Announcement
Additional configuration ST CDIV service is not reachable when any of the response codes are received ST CDIV service is not reachable when the timer expires Global Communication Forwarding blacklist for the MTAS Maximum number of times the same communication is allowed to be forwarded `INVITE` method response 302 causes a redirect generated by the ST AS, or if the 302 is to be passed on to the UA





Service data Operator subscription level service configuration (activating / deactivating ST CDIV service subscription for the PBX)

ST MCID administrative state	ST Malicious Communication Identification (ST MCID)	ST AS Malicious Communication Identity Service Management Guide
Reporting method
Communication Details Server (CDS)
Closure of ACR files for local storage definition
Service data Operator subscription level service configuration (activating / deactivating ST MCID service subscription for the PBX, list of PBX extension numbers triggering the service)

Contexts for the dialed numbers Phone error correction context Profile context Domain name context Global phone context	ST Number Normalization	ST AS Number Normalization Management Guide




Normalization data Profile (profile context, phone error context)

Algorithm data Substitution regular expressions OSN numbers NSN numbers



Identity Presentation administrative state	ST Identity Presentation	ST AS Identity Presentation Service Management Guide
Additional configuration Enabling / disabling screening of the From header Enabling / disabling denormalization of the From header Enabling / disabling copying of the Request URI to the To header



Reason for lack of caller identity
Service data Operator subscription level service configuration (subscription options for OIP / OIR) User subscription level service configuration (user level configuration options for OIP / OIR)

2.4 Network AS Services

Table 21 lists the configuration-related tasks for Network AS services.

Table 21 Network AS Services Configuration-Related Tasks
Configuring	Function	Reference
NW AS administrative state	Communication Interworking Functionality (IWF)	Network AS Management Guide
NW AS name
NW AS SIP port
Precondition IWF administrative state	Precondition IWF	Network AS Precondition IWF Management Guide
Predefined number range	Precondition IWF	Network AS Precondition IWF Management Guide

2.5 Co-Location of AS Roles

Table 22 lists the configuration-related tasks for Co-location of AS roles.

Table 22 Co-Location of AS Roles Configuration-Related Tasks
Configuring	Function	Reference
Node level functions	Co-location of AS roles	Co-Location of AS Roles in MTAS
AS role-specific functions
Service data Operator subscription level service configuration User subscription level service configuration

2.6 XML Document Management Server

Table 23 lists the configuration-related tasks for the XML Document Management Server (XDMS).

Table 23 XML Document Management Server Configuration-Related Tasks
Configuring	Function	Reference
Diameter stack for XDMS	XML Document Management Server (XDMS)	MTAS XDMS Management Guide
Sh interface
Optional XDMS function parameters
Access of Ut interface Administrative state Reading, modifying and deleting its own MTAS service-specific provisioning data for MTAS subscriber


Access of CAI3G interface Administrative state Operator managing subscriber data in an encrypted and authenticated way


CAI3G interface MTAS XDMS Keystore modifications (create / delete CAI3G certificate, import trusted certificate, list stored certificates) Applying the Modified MTAS XDMS Keystore CAI3G logging

3 Quality of Service

Table 24 lists the configuration-related tasks for Quality of Service (QoS) assurance.

Table 24 QoS Assurance Configuration-Related Tasks
Configuring	Function	Reference
DSCP⁽¹⁾ marking value in MTAS	Differentiated Services	MTAS External Network Configuration

(1) Differentiated Services Code Point (DSCP)

4 Network Connectivity

4.1 External Network Configuration

Table 24 lists the high-level configuration-related tasks of the neighboring IMS nodes needed for correct operation of the MTAS.

Table 25 External Network Configuration
Configuring	Function	Reference
MTAS interfaces: Dh / Sh / CNS / SNM / Rf / Ro / CDS / DNS / ISC / Ma / Pw / Ut / CAI3G / CAT / Mr / Mp / CAPv2 / ETSI MAP / Parlay X	Interface configuration	MTAS External Network Configuration
HSS configuration Initial Filtering Criteria for MTAS services Implicit Registration Set Service Indication Subscription and service profile administration	Node configuration




MTAS dynamic allocation DNS AS instance caching


MTAS DNS-based redundancy and load sharing of external server nodes SRV records A/AAAA records


Provisioning in MTAS
MTAs parameter value selection for deployment-dependent CM attributes
Installation of additional MTAS nodes
Public Service Identities	Services configuration
Differentiated Services
AS Controlled Forking
Originating AS chaining
MTAS services suppression based on the INVITE method

4.2 External Network Configuration for SIP Trunking

Table 26 lists the high-level configuration-related tasks of the neighboring IMS nodes needed for correct operation of the ST AS in the MTAS.

Table 26 External Network Configuration for SIP Trunking
Configuring	Function	Reference
MTAS interfaces: Dh / Sh / SNM / Rf / CDS / DNS / ISC / Ma / ST AS to IBCF / ST AS to Transit Function / CAI3G / Mr / Mp	Interface configuration	MTAS External Network Configuration for SIP Trunking
HSS configuration (static mode) Initial Filtering Criteria HSS service type Service Indication HSS service trigger HSS configuration (dynamic mode) Initial Filtering Criteria Implicit Registration Set Service Indication Subscription and service profile administration	Node configuration









I-CSCF configuration (static mode) Standalone transit Collocated transit


Provisioning in MTAS (dynamic mode)
Extra ST AS node installation
Public Service Identities	Services configuration
Originating AS chaining	Services configuration

4.3 IPv6 Configuration

Table 27 lists the IPv6 configuration-related tasks for MTAS towards its peer nodes.

Table 27 IPv6 Configuration Tasks
Configuring	Function	Reference
Adding VIP IPv6 addresses	IPv6 configuration	MTAS IPv6 Management Guide
Adding and connecting Diameter IPv6 addresses
Peer nodes IPv6 configuration SIP H.248 Parlay X NameDB DNS

5 MTAS Node Level Management

5.1 Node Management

Table 28 lists the configuration-related tasks and areas for MTAS node level management.

Table 28 MTAS Node Level Management Configuration-Related Tasks and Areas
Configuring	Function	Reference
MTAS management Activating MTAS Deactivating MTAS (gracefully / forcefully)	Node Management	MTAS Node Management Guide
License Management Adding licenses Checking license data / use
MMTel AS management Activating MMTel AS Deactivating MMTel AS (gracefully / forcefully) Activating Supplementary Services Deactivating Supplementary Services Setting the attributes of Supplementary Services
SCC AS management Activating SCC AS Deactivating SCC AS (gracefully / forcefully) Collocating MMTel AS and SCC AS
ST AS management Activating ST AS Deactivating ST AS (gracefully / forcefully) Activating Supplementary Services Deactivating Supplementary Services Setting the attributes of Supplementary Services
SIP management Changing SIP ports and parameters Traffic activation / deactivation
CS interworking management Activation / deactivation of CS interworking
Charging management Definition of a charging destination (Diameter stack) Definition of charging profiles Connecting a charging profile to a service	Node Management	MTAS Node Management Guide
Subscriber data management Configuring the Diameter stack Configuring the Sh interface Changing optional parameters Query and purge
XDMS management Configuring the Diameter stack Configuring the Sh interface Configuring Ut interface Configuring CAI3G interface Changing optional parameters Activating provisioning by CAI3G manager Deactivating provisioning by CAI3G manager (gracefully / forcefully) Activating provisioning by Ut client Deactivating provisioning by Ut client (gracefully / forcefully)
Number Normalization management Definition of Number Normalization profiles Definition of domain names from which user=phone parameter is missing Definition of contexts Definition of substitution rules Definition of Operator Service Numbers (OSNs) Definition of National Significant Numbers (NSNs)
Media Resource Function management Creating an MRFP Activating an MRFP Deactivating an MRFP Deleting an MRFP Changing MRFP and MRFC parameters	Node Management	MTAS Node Management Guide
Announcement management
Performance measurement management Measurement XML files management
Log management
Fault Management
Security management
Recovery Software restart System restore
Backup
Maintenance schedule

5.2 Media Control

Table 29 lists the configuration-related tasks for media control in MTAS.

Table 29 Media Control Configuration-Related Tasks
Configuring	Function	Reference
MRFP Adding Activating Configuring Deactivating (gracefully / forced) Removing	Media control	MTAS Media Control Management Guide
Mp interface Activating IP protocol version Multiple language supports Mrf operation timer Hangterm timer
MRFC Configuring default Adding Changing parameters Activating Deactivating Removing
Mr interface Activating IP protocol version Multiple language support DNS-based redundancy	Media control	MTAS Media Control Management Guide
MRF selection Adding MRF site Removing MRF site Configuring default Configuring MRF access map Activating location-based MRF selection Deactivating location-based MRF selection	Media control	MTAS Media Control Management Guide

5.3 MTAS Services

Table 30 lists the MTAS services and configuration information.

Table 30 MTAS Services
Configuring	Function	Reference
MTAS services Abbreviated Dialing Address Policing Advice of Charge AS Interworking Calling Party Category Call Return Carrier Pre-Select Carrier Select Communication Barring Communication Completion Communication Diversion Communication Waiting Conference Customized Alerting Tones Dialed Number Mapping Dialog Event Notifier Dial Plan Dial Tone Management Distinctive Ring Emergency Call Notification Explicit Communications Transfer Flexible Communication Distribution Flexible Service Format Selection Gateway Model Generic Announcement Group Call Admission Control Hold Communication Hotline	MTAS services	MTAS Service Management Guide
Identity Presentation Japanese Charging Malicious Communication Identification Multimedia Telephony Multiple Languages Support Network Announcement Network Provided Ring Back Tone Number Portability Parlay X Parlay X in MMTel Priority Call Session Transfer to Own Device Short Number Dialing Single Radio Voice Call Continuity Supplementary Service Codes Three Party User Call Admission Control Video Fallback to Audio Wholesale	MTAS services	MTAS Service Management Guide
Service Activation Deactivation (immediately / gracefully) Parameter configuration

5.4 SIP Management

Table 31 lists the configuration-related tasks for SIP.

Table 31 SIP Configuration-Related Tasks
Configuring	Function	Reference
Session case determination	SIP	MTAS SIP Management Guide
Changing IP-version
Changing DSCP marking value
Changing SIP ports
SIP parameters configuration
SIP traffic and OAM traffic separation
DNS configuration Adding DNS entry
Call Out Of the Blue
Handling OPTIONS (ping)
Failover and greylisting
Served user
Originating AS chaining
Keepalive mechanism
SIP Upstream Overload Control administrative state	SIP Upstream Overload Control	MTAS SIP Upstream Overload Control Management Guide
SIP Upstream Overload Control parameters Overload Onset Overload Abatement Default Overload Control Increase Step Default Overload Control Decrease Step Overload Control Regulation Interval Overload Control Validity
SIP Upstream Overload Control resource configuration CPU use related resources Heap / Memory / MultiMMap use related resources TIPC use related resources

5.5 SS7 Management

Table 32 lists the configuration-related tasks for SS7.

Table 32 SS7 Configuration-Related Tasks
Configuring	Function	Reference
Enabling expert mode	SS7	MTAS SS7 Management Guide
Signalling network - SCCP layer
TCAP
CAP and MAP INAP ETSI MAP
SCTP
Activating the configuration changes
SCTP link failure detection

5.6 Subscriber Data Management

Table 33 lists the configuration-related tasks for Subscriber Data.

Table 33 Subscriber Data Configuration-Related Tasks
Configuring	Function	Reference
Sh Diameter stack Own node configuration for Subscriber Data / XDMS functions Neighbor node data configuration for Subscriber Data / XDMS functions Realm Routing Table data configuration	Subscriber Data	MTAS Subscriber Data Management Guide
Sh interface
Caching contact data and UE terminal type classification
Wholesale for Subscriber Data
Query or purge file retrieval

5.6.1 Subscriber Credit Notification Management

Table 34 lists the configuration-related tasks for Subscriber Credit Notification.

Table 34 Subscriber Credit Notification Configuration-Related Tasks
Configuring	Function	Reference
Subscriber Credit Notification administrative state	Subscriber Credit Notification	MTAS Subscriber Credit Notification Management Guide
Additional activities Putting video stream on hold Using MRF provided SDP offer/answer
Announcement name
Wholesale for Subscriber Credit Notification

5.7 Target Handling Management

Table 35 lists the configuration-related tasks for Target Handling.

Table 35 Target Handling Configuration-Related Tasks
Configuring	Function	Reference
Service data Operator subscription level service configuration (activating / deactivating the user common data subscription, setting the maximum number of targets in the common target list and in the common device list, allowing / disallowing the use of the common device list, enabling the auto-answer avoidance feature for FCD and STOD) Subscriber subscription level service configuration (common target list, common device list)	Target Handling	MTAS Target Handling Management Guide
Terminal selector prefix used in network signaling
AS Controlled Forking administrative state

5.8 Time Based Services Management

Table 36 lists the configuration-related tasks for Time Based Services.

Table 36 Time Based Services Configuration-Related Tasks
Configuring	Function	Reference
Calendar data for Time Based Services	Time Based Services	MTAS Time Based Services Management Guide
Wholesale for Time Based Services
Service data Operator subscription level service configuration (activating / deactivating the fine-grained service subscriptions for the time-based conditions, activating / deactivating the holiday-list element for the subscriber) Subscriber subscription level service configuration (user common data, time-based conditions)
UTC Offset Within the time-based conditions Within the user common data by the <utc-offset> element By CM attribute
Start day of the week Within the user common data by the <start-day-of-week> element By CM attribute
Workdays and non-workdays Within the user common data by the <non-workday-list> element By CM attribute
Private and public holidays List of private holidays List of public holidays
Subscription rules Time-based conditions cp: validity mmt-serv: invalidity mmt-serv: valid-periods (mmt-serv: utc-offset, mmt-serv: valid-days, mmt-serv: valid-times, mmt-serv: valid-months, mmt-serv: valid-weeks, mmt-serv: repeat-daily, mmt-serv:repeat-weekly, mmt-serv: repeat-monthly, mmt-serv: valid-monthdays, except-holidays)

6 Data Collection

The data collection procedures instruct which troubleshooting data to collect that can be enclosed in Customer Service Requests (CSRs) or Trouble Reports (TRs), if a problem is experienced with the MTAS.

Table 37 lists the tasks related to data collection.

Table 37 Data Collection Tasks
Task	Function	Reference
Perform data collection	Data Collection	Data Collection Guideline for MTAS

7 Health Check

Health check means checking and monitoring the current state and health of the system, and searching for irregularities and deviations. During this procedure, MTAS health information is collected. The administrator can then decide if more actions are needed, or if a software or hardware configuration change is needed.

Table 38 lists the tasks related to health check.

Table 38 Health Check Tasks
Task	Function	Reference
Perform health check	Health Check	MTAS Health Check

8 Fault Management

Table 39 lists the various tasks for fault management.

Table 39 Fault Management Tasks
Task	Function	Reference
Configure SNMP targets or an SNMP view	SNMP configuration in Alarm handling	Section SNMP Configuration in Fault Management
Configure alarm severity	Alarm handling	Section Alarm Configuration in Fault Management
Get the active alarm list	Alarm handling	Section Alarm Configuration in Fault Management MTAS Alarm list
Get the active alarm list	Alarm handling
Change the heartbeat	Alarm handling	Section Alarm Configuration in Fault Management

9 File Management

Table 40 lists the various tasks for file management.

Table 40 File Management Tasks
Task	Function	Reference
Access to a logical file system through the MOM, based on security rules	File management	Section Types of Operation in File Management
Access to a logical file system over SFTP, based on security rules	File management	Section Types of Operation in File Management
Definition, modification, and deletion of preventive maintenance file group policies	File management	Section Types of Operation in File Management
Collect alarm logs	Alarm log handling	Section File Management in Fault Management Fetch File in Logical File System
Collect alarm logs	Alarm log handling

10 Performance Management

For performance measurements refer to MTAS Performance Measurements.

Performance measurements are enabled by configuring Performance Management Jobs. The Performance Management (PM) Jobs are provided as PDB Configuration.

For Information about Performance Measurement Jobs configuration refer to Preparing MTAS Configuration Files Using Parameter Database.

Alternatively, the PM Jobs can be created, started, stopped, or deleted manually.

Table 41 lists the various tasks for performance management.

Table 41 Performance Management Tasks
Task	Function	Reference
List measurement types, PM groups, and PM jobs	Performance Management	Section Types of Operation in Performance Management
Create, start, stop, and delete measurement collection jobs	Performance Management	Section Types of Operation in Performance Management
Create, start, stop, and delete threshold monitoring jobs	Performance Management	Section Types of Operation in Performance Management

11 OAM Security Management

Table 42 lists the various tasks for the NBI users in the Operations, Administration, and Maintenance (OAM) security management area.

Table 42 OAM Security Management Tasks
Task	Function	Reference
View LDAP configuration	LDAP Authentication in Security management	Section LDAP Authentication in User Management
Unlock/lock LDAP authentication method	LDAP Authentication in Security management	Section LDAP Authentication in User Management
Change bind name and password for LDAP authentication	LDAP Authentication in Security management	Section LDAP Authentication in User Management
Change certificate settings for LDAP TLS	LDAP Authentication in Security management	Section LDAP Authentication in User Management
Change Target-Based Access Control (TBAC)	LDAP Authentication in Security management	Section LDAP Authentication in User Management
View roles and rules	Local Authorization in Security management	Section Local Authorization in User Management
Lock/unlock local authorization method	Local Authorization in Security management	Section Local Authorization in User Management
Create, change, and delete custom roles and custom rules	Local Authorization in Security management	Section Local Authorization in User Management
Understand MTAS-specific roles and rules	Local Authorization in Security management	Section MTAS Roles and Rules in User Management

12 Software Management

Table 43 lists the various tasks for software management.

Table 43 Software Management Tasks
Task	Function	Reference
Prepare an Upgrade Package	Software upgrade in software management	Section Software Upgrade in Software Management
Upgrade using one-step activation	Software upgrade in software management	Section Software Upgrade in Software Management
Upgrade using step-by-step activation	Software upgrade in software management	Section Software Upgrade in Software Management
Cancel an upgrade operation	Software upgrade in software management	Section Software Upgrade in Software Management
Delete an Upgrade Package	Software upgrade in software management	Section Software Upgrade in Software Management
Delete an inactive software version	Software removal in software management	Section Software Removal in Software Management
View software information	Software Inventory Management	Section Types of Operation in Software Inventory Management

13 System Management

Table 44 lists the various tasks for system management.

Table 44 System Management Tasks
Task	Function	Reference
Address Managed Element	System management	Section Address Managed Element in System Management
Identify DN Prefix	System management	Section Identify DN Prefix in System Management
Identify Managed Element	System management	Section Identify Managed Element in System Management
Identify Managed Element Location	System management	Section Identify Managed Element Location in System Management
List Supported XML Model Files	System management	Section Manage XML Model Files in System Management
Push of XML Model Files to External System	System management	Section Manage XML Model Files in System Management

14 System Backup and Restore

Table 45 lists the various tasks for backup and restore management.

Table 45 Backup and Restore Tasks
Task	Function	Reference
Create Backup Restore Backup Delete Backup Cancel Backup and Restore Operation List Backups View Progress Report	Backup and restore management	Section Basic Backup Operations in System Backup and Restore





Schedule Single Backup Schedule Backups Based on Calendar Event Schedule Backups Based on Periodic Event	Backup and restore management	Section Schedule Backups in System Backup and Restore



Change Prefix for Scheduled Backup Name Delete Scheduled Event Set Maximum Number of Scheduled Backups Lock Backup Scheduler Unlock Backup Scheduler	Backup and restore management	Section Manage Scheduled Backups in System Backup and Restore





Change Maximum Number of Manual Backups Enable Automatic Deletion of Manual Backups Disable Automatic Deletion of Manual Backups	Backup and restore management	Section Manage Manual Backups in System Backup and Restore



Export Backup Import Backup Change Prefix for Exported Backup Names Set Automatic Export of Scheduled Backups	Backup and restore management	Section Import and Export Backups in System Backup and Restore