| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
vtasAoc
-
This attribute defines the primary key of VtasAoc and this section describes the VtasAoc attribute.
|
BasicAdmState |
-
vtasAocAdministrativeState
=
LOCKED
-
This attribute defines the current administrative state of the VtasAoC MO, and is used to activate or
deactivate the Advice Of Charge function.
Takes effect: New session
|
MtasTerminateContinueDT |
-
vtasAocCostFailureAction
=
CONT
-
This attribute defines the required behaviour if the MTAS cannot provide the user (that is provisioned with the AOC-D service or the AOC-E service) with the cost of the session. Two options are possible; either terminate (set to 0) the session or allow the session to continue (set to 1) without the advice of cost (default).
Takes effect: New session
|
VtasDropBackDT |
-
vtasAocDropBack
=
USE_OTP_VALUES
-
This attribute defines whether the Virtual Telephony Provider (VTP) want to use the values of the corresponding Operating Telephony Provider (OTP) attributes in MtasAoc.
When this attribute is set to "Use own values", the initial values of the other attributes in VtasAoc are all set to the values of the corresponding attributes in MtasAoc,and the behavior of MTAS for the served user's belonging to this VTP is determined by the values of the attributes of VtasAoc.
When this attribute is set to "Use OTP values" (default), the behavior of MTAS for the served user's belonging to this VTP is determined by the values of the attributes of MtasAoc.
0 = Use own values
1 = Use OTP value
Takes effect: New session
|
MtasTimerSec00005to003600DT |
-
vtasAocDuringTimer
=
90
-
This attribute defines the time interval between AoC-During updates during a session.
Overall system performance is likely to be affected if (a) this attribute is set to a low
value and (b) there is a high take-up of AOC-D service by the user's. As a general guidance, be cautious
about configuring the attribute to a value that is less than 30 seconds. For more specific advice, please consult
the Ericsson support team.
Takes effect: New session
|
MtasString0to255DT[0..1] |
-
vtasAocPrimaryEcfAddress
-
This attribute defines the default Diameter realm of the online charging server that the AOC uses.
Takes effect: New session
|
MtasString0to255DT[0..1] |
-
vtasAocSecondaryEcfAddress
-
This attribute defines the secondary Diameter realm of the online charging server that the AOC uses.
Observe: This is optional.
Takes effect: New session
|
MtasString0to255DT[0..1] |
-
vtasAocServiceContextId
=
AOC-IMS@ericsson.com
-
This attribute defines the application that invoked the request.
This attribute is used on the online charging interface and uniquely identifies the application that invoked the request.
To comply with 3GPP TS 32.299, this string is to be of the form
"extensions".MNC.MCC."Release"."service-context" "@" "domain". As a minimum, the string needs to contain "Release",
"service-context", "@" and" domain" where "Release" = 8, for "service-context" 3GPP have defined "32275" for
Advice-of-Charge but is only a recommendation, "domain" = the domain of the node operator, for example, ericsson.com.
As an example, this might give a value of MNC.MCC.6.32275@ericsson.com or 8.aoc@telco.com
Specification: To comply with 3GPP TS 32.299, this string is to be of the form
"extensions".MNC.MCC."Release"."service-context" "@" "domain". As a minimum, the string needs to contain "Release",
"service-context", "@" and" domain" where "Release" = 8, for "service-context" 3GPP have defined "32275" for
Advice-of-Charge but is only a recommendation, "domain" = the domain of the node operator, for example, ericsson.com.
As an example, this might give a value of MNC.MCC.6.32275@ericsson.com or 8.aoc@telco.com
Takes effect: New session
|
MtasTerminateContinueDT |
-
vtasAocTariffFailureAction
=
TERM
-
This attribute defines the required behaviour if the MTAS cannot provide the applicable tariff to a user that is provisioned with the Advice of Charge-Start (AOC-S) service. Two options are possible; either terminate the session (set to 0, default) or allow the session to continue (set to 1) without the data.
Takes effect: New session
|