| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
vtasCcbs
-
This attribute defines the primary key of VtasCcbs and this section describes the VtasCcbs attributes.
|
VtasDropBackDT |
-
vtasCcbsDropBack
=
USE_OTP_VALUES
-
This attribute defines whether the Virtual Telephony Provider (VTP) want to use the values of the corresponding Operating Telephony Provider (OTP) attributes in MtasCcbs.
When this attribute is set to "Use own values", the initial values of the other attributes in VtasCcbs are all set to the values of the corresponding attributes in MtasCcbs,
and the behavior of MTAS for the served users belonging to this VTP is determined by the values of the attributes of VtasCcbs.
When this attribute is set to "Use OTP values", the behavior of MTAS for the served users belonging to this VTP is determined by the values of the attributes of MtasCcbs.
Takes effect: New session
|
MtasCCxxInvocationCodeDT[0..1] |
-
vtasCcbsInvocationCode
-
This attribute defines the code used for inband invocation of the Call Completion Busy Subscriber (CCBS) service. Observe: This attribute is used by the MTAS when requesting the Media Resource Function Processor to collect the CCBS invocation code inband from the caller.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcbsInvokePromptAudioAnn
=
0
-
This attribute defines the code of the audio only announcement that is to be played by the Call Completion service when a busy response is received from the terminating side, indicating that Call Completion is possible.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcbsInvokePromptAVAudioAnn
=
0
-
This attribute defines the code of the audio component of the audio-video announcement that is to be played by the Call Completion service when a busy response is received from the terminating side, indicating that Call Completion is possible.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcbsInvokePromptAVVideoAnn
=
0
-
This attribute defines the code of the video component of the audio-video announcement that is to be played by the Call Completion service when a 486 Busy response is received from the terminating side, indicating that Call Completion is possible.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcbsInvokePromptVideoAnn
=
0
-
This attribute defines the code of the video only announcement that is to be played by the Call Completion service when a busy response is received from the terminating side, indicating that Call Completion is possible.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcbsIvrInvPromptAudioAnn
=
0
-
This attribute defines the code of the audio only announcement that is to be played by the Call Completion service when IVR is enabled and when a busy response is received from the terminating side, indicating that Call Completion is possible.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcbsIvrInvPromptAVAudioAnn
=
0
-
This attribute defines the code of the audio component of the audio-video announcement that is to be played by the Call Completion service when IVR is enabled and when a busy response is received from the terminating side, indicating that Call Completion is possible.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcbsIvrInvPromptAVVideoAnn
=
0
-
This attribute defines the code of the video component of the audio-video announcement that is to be played by the Call Completion service when IVR is enabled and when a 486 Busy response is received from the terminating side, indicating that Call Completion is possible.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCcbsIvrInvPromptVideoAnn
=
0
-
This attribute defines the code of the video only announcement that is to be played by the Call Completion service when IVR is enabled and when a busy response is received from the terminating side, indicating that Call Completion is possible.
Takes effect: New session
|
BasicAdmState |
-
vtasCcbsIvrPlayInvPromptAudioAnn
=
LOCKED
-
This attribute defines whether to LOCK (0)/UNLOCK (1) the originating network Call Completion Invoke Prompt audio announcement when IVR is enabled.
Takes effect: New session
|
BasicAdmState |
-
vtasCcbsIvrPlayInvPromptVideoAnn
=
LOCKED
-
This attribute defines whether to LOCK (0)/UNLOCK (1) the originating network Call Completion Invoke Prompt video announcement when IVR is enabled.
Takes effect: New session
|
BasicAdmState |
-
vtasCcbsPlayInvokePromptAudioAnn
=
LOCKED
-
This attribute defines whether to LOCK (0)/UNLOCK (1) the originating network Call Completion Invoke Prompt audio announcement.
Takes effect: New session
|
BasicAdmState |
-
vtasCcbsPlayInvokePromptVideoAnn
=
LOCKED
-
This attribute defines whether to LOCK (0)/UNLOCK (1) the originating network Call Completion Invoke Prompt video announcement.
Takes effect: New session
|
MtasCcbsProvisionalResponseTimerDT |
-
vtasCcbsProvisionalResponseTimer
=
20
-
This attribute defines the timer value, where the timer will be triggered after receiving any first 18x provisional response from the diverted target following the communication diversion by Communication Forwarding on Busy (CFB). This timer can be disabled by setting the value to 0.
Takes effect: New session
|
MtasTimerMin00001to000180DT |
-
vtasCcbsT3ServiceDurationTimer
=
45
-
This attribute defines the value of the Call Completion Busy Subscriber service duration timer T3, as defined by 3GPP 24.642. Observe: This is the timer that is run in the originating MTAS after a successful Call Completion invocation request and specifies the maximum time allowed for a request to remain uncompleted in the agent queue.
Dependencies: The value of this timer cannot be set to a value greater than or equal to vtasSubsDataDefaultRegTimer.
Takes effect: New session
|
MtasTimerMin00001to000015DT |
-
vtasCcbsT7ServiceDurTimerOffset
=
10
-
This attribute defines the value of the Call Completion Busy Subscriber service duration timer T7, as defined by 3GPP 24.642, except that it defines the offset value from timer vtasCcT3ServiceDurationTimer. Observe: vtasCcbsT3ServiceDurationTimer + this timer value is run in the terminating MTAS after a successful Call Completion invocation request and specifies the maximum time allowed for a request to remain uncompleted in the monitor queue.
Takes effect: New session
|