| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
vtasCw
-
This attribute defines the primary key of VtasCw and this section describes the VtasCw attributes.
|
BasicAdmState |
-
vtasCwAdministrativeState
=
LOCKED
-
This attribute defines the administrative state of the CW service.
- When UNLOCKED (1), CW is active and will be provided to all subscribers with an active subscription.
- When LOCKED (0), CW service will not be provided.
Dependencies: The vtasCwAdministrativeState attribute must not be set to the value 1 (Unlocked) unless the vtasUCacAdministrativeState attribute is set to the value 1 (Unlocked) or the vtasCwOperateMode attribute is set to the value 2 (ALTERNATE_MODE_2) or 4 (MOBILE_CW) or 5 (MOBILE_CW_ALTERNATE_MODE_1).
Takes effect: New session
|
MtasTimerSec00030to000120DT |
-
vtasCwAlertTimer
=
50
-
This attribute defines the time interval within which the served user must respond to a CW indication before the waiting session is cancelled.
The relative values of vtasCDivTimer and vtasCwAlertTimer determine whether Call Forward No Reply or CW takes precedence. The timer with the smaller value will take precedence.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCwAudioAnnounceCode
=
0
-
This attribute defines the code that corresponds to the desired audio announcement to be played to the calling party when a subscriber is being
alerted that there is a CW.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCwAVAudioCode
=
0
-
This attribute defines the code that corresponds to the desired video stream in the audio or video announcement to be played to the calling party when a subscriber is being alerted that there is a CW.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCwAVVideoCode
=
0
-
This attribute defines the code that corresponds to the desired video stream in the audio or video announcement to be played to the calling party when a subscriber is being alerted that there is a CW.
Takes effect: New session
|
VtasDropBackDT |
-
vtasCwDropBack
=
USE_OTP_VALUES
-
This attribute defines whether the Virtual Telephony Provider (VTP) want to use the values of the corresponding Operating Telephony Provider (OTP) attributes in MtasCw.
When this attribute is set to "Use own values", the initial values of the other attributes in VtasCw are all set to the values of the corresponding attributes in MtasCw,
and the behavior of MTAS for the served users belonging to this VTP is determined by the values of the attributes of VtasCw.
When this attribute is set to "Use OTP values", the behavior of MTAS for the served users belonging to this VTP is determined by the values of the attributes of MtasCw.
Takes effect: New session
|
MtasCwIndicationDT |
-
vtasCwIndication
=
XML_CWA_INDICATION
-
This attribute defines the type of Communication Waiting (CW) indication. The CW indication can be XML indication, or P-Service-Indication, or both XML and P-Service-Indication header.
Takes effect: New session
|
MtasCwOperateModeNewDT |
-
vtasCwOperateMode
=
NORMAL
-
This attribute defines the mode to be used when CW is used. This controls a number of specific features which do not form part of the generic service. This attribute is only modified when the MTAS is initially deployed. Modification following system deployment will result in modified message sequences which may impact traffic.
Dependencies: The vtasCwOperateMode attribute can only be set to 2 (ALTERNATE_MODE_2) or 4 (MOBILE_CW) or 5 (MOBILE_CW_ALTERNATE_MODE_1) when vtasCwAdministrativeState attributes is set to the value 0 (Locked).
Takes effect: New session
|
BasicAdmState |
-
vtasCwPlayAudioAnnouncement
=
LOCKED
-
This attribute defines whether the playing of an audio announcement to the Calling party that CW is being used is LOCKED (0) or UNLOCKED (1).
Takes effect: New session
|
BasicAdmState |
-
vtasCwPlayVideoAnnouncement
=
LOCKED
-
This attribute defines whether the playing of a video or Audio and Video announcement to the Calling party that CW is being used is LOCKED (0) or UNLOCKED (1).
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasCwVideoAnnounceCode
=
0
-
This attribute defines the code that corresponds to the desired pure video stream to be played to the calling party when a subscriber is being alerted that there is a CW.
Takes effect: New session
|