| Attributes |
integerKeyString
key
mandatory
noNotification
restricted |
-
vtasHold
-
This attribute defines the primary key of VtasHold and this section describes the VtasHold attributes.
|
BasicAdmState |
-
vtasHoldAudioAnnouncement
=
LOCKED
-
This attribute defines if an audio network announcement must be played. When the attribute is enabled, and the held stream is an audio stream, an audio announcement corresponding to the value of the vtasHoldCodeAudio attribute will be played to a held user. Service orders this announcement to be played indefinitely. This also means the service stops the announcement.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasHoldAudioCode
=
0
-
This attribute defines which audio announcement is to be played to a held user. The code corresponds to the relation between codes and announcements setup in utilized MRFPs. Service orders this announcement to be played indefinitely. This also means the service stops the announcement.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasHoldAVAudioCode
=
0
-
This attribute defines the audio, associated with a video announcement, that is to be played to a held user. The code corresponds to the relation between codes and announcements setup in utilized MRFPs. Service orders this announcement to be played indefinitely. This also means the service stops the announcement.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasHoldAVVideoCode
=
0
-
This attribute defines which video announcement that is to be played to a held user. The audio code vtasHoldAudioVideoCode attribute must be configured for this video code.The code corresponds to the relation between codes and announcements setup in the utilized MRFPs. Service orders this announcement to be played indefinitely. This also means the service stops the announcement.
Takes effect: New session
|
MtasHoldBandwidthOptimizationBehaviourDT |
-
vtasHoldBandwidthOptimizationBehaviour
=
SIP_INSTANCE_DEPENDENCY
-
This attribute defines whether Call HOLD service shall check +sip.instance feature tag in the Contact header in the REINVITE/UPDATE request invoking the Call Hold/Resume procedure to provide bandwidth optimization. It recommended to set the attribute value to 1(NO_SIP_INSTANCE_DEPENDENCY).
Takes effect: New session
|
BasicAdmState |
-
vtasHoldBandwidthOptimizationMode
=
LOCKED
-
This attribute specifies whether bandwidth optimization shall be used for Hold.
- If the attribute is set to LOCKED (0), no bandwidth optimization is done, i.e. the bandwidth reserved for the held session cannot be reused.
- If the attribute is set to UNLOCKED (1), then bandwidth optimization is enabled, i.e. the bandwidth reserved for the held session can be reused for a new call.
Takes effect: New session
|
VtasDropBackDT |
-
vtasHoldDropBack
=
USE_OTP_VALUES
-
This attribute defines whether the Virtual Telephony Provider (VTP) want to use the values of the corresponding Operating Telephony Provider (OTP) attributes in MtasHold.
When this attribute is set to "Use own values", the initial values of the other attributes in VtasHold are all set to the values of the corresponding attributes in MtasHold,
and the behavior of MTAS for the served users belonging to this VTP is determined by the values of the attributes of VtasHold.
When this attribute is set to "Use OTP values", the behavior of MTAS for the served users belonging to this VTP is determined by the values of the attributes of MtasHold.
Takes effect: New session
|
BasicAdmState |
-
vtasHoldSupportNon3GPP
=
LOCKED
-
This attribute controls if non 3GPP transitions are to be supported.
Takes effect: New session
|
BasicAdmState |
-
vtasHoldVideoAnnouncement
=
LOCKED
-
This attribute defines if a video network announcement must be played. When the attribute is UNLOCKED (1), and the held stream is a video stream, an announcement corresponding to the value of the vtasHoldVideoOnlyCode attribute, or to the values of the vtasHoldAVVideoCode and vtasHoldAVAudioCode attributes, will be played to a held user. Service orders this announcement to be played indefinitely. This also means the service stops the announcement.
Takes effect: New session
|
MtasUint00000to065535DT |
-
vtasHoldVideoOnlyCode
=
0
-
This attribute defines which video announcement, without audio, that is to be played to a held user. The code corresponds to the relation between codes and announcements setup in utilized MRFPs. Service orders this announcement to be played indefinitely. This also means the service stops the announcement.
Takes effect: New session
|