Contents

1   Overview

This document is the Operating Instructions (OPI) for the alarm SS7 CAF Process Down.

1.1   Alarm Description

This is an alarm of severity MAJOR.

The alarm is issued when an attempt to start a process is failed.

The possible alarm causes and fault locations are explained in Table 1.

Table 1    Alarm Causes

Alarm Cause	Description	Fault Reason	Fault Location	Impact
A process is crashed or killed. ECM was unable to connect to the process after it was started. A controlled takedown of the process was made. Internal cluster network problems	An attempt to start a process failed.	Process crashed, killed or unavailable Internal cluster network problems	Internal cluster network	Normally this is a non-fatal alarm; the ECM will try to start the process again. If the alarm is raised more than 5 times within 5 minutes or is persistent for 5 minutes, follow the procedure below.

The following alarm attributes apply to this alarm:

Table 2    Alarm Attributes

Attribute Name	Attribute Value
Major Type	193
Minor Type	1586561537
Managed Object Class	N/A
Specific Problem	Process Down
Perceived Severity	SEVERITY_MAJOR

2   Procedure

Perform the following steps if the alarm is raised multiple times or persistent:

1. Check other alarms from the cluster about the internal cluster network status.
2. Collect the ecm.log and ss7trace.log located in /opt/sign/log.

   Also collect the current configuration which is located in the folder /opt/sign/etc. Collect the file active.om.cim and all the files with the extension *.cnf.

3. Contact next level of support and provide the files collected in Step 2 above.