View Progress Report

1	Introduction
1.1	Prerequisites
2	Procedure

1 Introduction

This document describes how to view the ongoing progress report or the result of the last backup operation. There is no historical information about earlier backup operation results.

1.1 Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1 Conditions

The following conditions must apply:

A backup and restore management operation has been started.
Note:
Scheduled backups are automatically started when a scheduled event is triggered.
An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

2 Procedure

To view the progress report of an operation:

Navigate to the relevant managed object as follows:
- For a backup or delete operation, for example:
  >dn ManagedElement=NODE06ST,SystemFunctions=1,BrM=1,BrmBackupManager=SYSTEM_DATA
- For a restore operation, for example:
  >dn ManagedElement=NODE06ST,SystemFunctions=1,BrM=1,BrmBackupManager=SYSTEM_DATA,BrmBackup=PERF_BACKUP_NAME1_20140428_175907

Display the progress report for the operation as follows:

For a backup or delete operation:

(BrmBackupManager=SYSTEM_DATA)>show progressReport

The following is an example output:

(BrmBackupManager=SYSTEM_DATA)>show progressReport
progressReport
   actionId=0
   actionName="CREATE"
   additionalInfo
      "Create Backup for PERF_BACKUP_NAME1_20140428_175907: Initialized"
      "Create Backup for PERF_BACKUP_NAME1_20140428_175907: Succeeded"
   progressInfo=""
   progressPercentage=100
   result=SUCCESS
   resultInfo="PERF_BACKUP_NAME1_20140428_175907 was created successfully."
   state=FINISHED
   timeActionCompleted="2016-04-25T15:49:01"
   timeActionStarted="2016-04-25T15:39:53"
   timeOfLastStatusUpdate="2016-04-25T15:49:01"

For a restore operation:

(BrmBackup=PERF_BACKUP_NAME1_20140428_175907)>show progressReport

The following is an example output:

progressReport
   actionId=99
   actionName=""
   progressInfo=""
   progressPercentage=0
   result=NOT_AVAILABLE
   resultInfo=""
   state=FINISHED
   timeActionCompleted="1970-01-01T06:00:00"
   timeActionStarted="1970-01-01T06:00:00"
   timeOfLastStatusUpdate="1970-01-01T06:00:00"

Note:: Since a long-running operation can be executing, it can be required to enter the command several times until the final operation result is shown in the progress report.
An additional example of a progress report for the creation of a manual backup is shown in Example 1.

Progress information can be read displaying attributes in progressReport. The progression of the values of important attributes during execution of a backup operation is shown in Table 1.

If the operation is successful, subattribute result=SUCCESS.

If the operation is unsuccessful, subattribute result=FAILURE and subattribute resultInfo in attribute progressReport reports an explanatory text message.

Table 1 Progress Values for Main Subattributes
Subattribute Name	Initial Value	Next Value	Next Value	Next Value	Final Value
`progressPercentage`	`0`	`25`	`50`	`75`	`100`
`state`	`RUNNING`	`RUNNING`	`RUNNING`	`RUNNING`	`FINISHED`
`result`	`NOT_AVAILABLE`	`NOT_AVAILABLE`	`NOT_AVAILABLE`	`NOT_AVAILABLE`	`SUCCESS`
`timeActionCompleted`	`1970-01-01T01:00:00`	`1970-01-01T01:00:00`	`1970-01-01T01:00:00`	`1970-01-01T01:00:00`	`2013-12-31T19:00:00`

Note:: Value 1970-01-01T01:00:00 shown for subattribute timeActionCompleted is used by default when no real value exists yet.

Example 1 Manual Backup Progress Report

BrmBackupManager=SYSTEM_DATA
   backupDomain="BRM_SYSTEM_DATA"
   backupType="BRM_SYSTEM_DATA"
   asyncActionProgress
      actionId=0
      actionName="CREATE"
      additionalInfo[]
         ""
      progressInfo="PREPARE_PHASE is completed"
      progressPercentage=50
      result=NOT_AVAILABLE
      resultInfo=""
      state=RUNNING
      timeActionCompleted="1970-01-01T01:00:00"
      timeActionStarted="2014-05-01T10:25:06"
      timeOfLastStatusUpdate="2014-05-01T10:26:09"
   progressReport
      actionId=0
      actionName="CREATE"
      additionalInfo[]
         ""
      progressInfo="PREPARE_PHASE is completed"
      progressPercentage=50
      result=NOT_AVAILABLE
      resultInfo=""
      state=RUNNING
      timeActionCompleted="1970-01-01T01:00:00"
      timeActionStarted="2014-05-01T10:25:06"
      timeOfLastStatusUpdate="2014-05-01T10:26:09"
   BrmBackup=PERF_BACKUP_NAME1_20140428_175907
   BrmBackup=PERF_BACKUP_NAME1_20140501_100533
   BrmBackup=PERF_BACKUP_NAME1_20140501_100926
   BrmBackup=PERF_BACKUP_NAME1_20140501_101310
   BrmBackup=PERF_BACKUP_NAME1_20140501_102102
   BrmBackup=PERF_BACKUP_NAME1_20140501_102500