Contents

1   Introduction

This document describes the following:

• The Managed Element (ME) Lightweight Directory Access Protocol (LDAP) client capabilities
• The LDAP configuration supported by the ME and required in the LDAP server for interworking
• The ME LDAP lookup behavior

2   LDAP Client

This section describes the LDAP client capabilities supported by the ME.

If one LDAP server fails, the LDAP clients must quickly fall over to a backup LDAP server. An LDAP bind attempt is time-limited to 12 seconds. If no response is received within this time, the client immediately attempts to bind to the next server in the list.

The ME offers the strongest cipher first and excludes the Data Encryption Standard (DES) cipher from the available cipher suite.

The ME can use directory server-enforced password policy control.

Password changes are handled in compliance with RFC 3062.

Note:  

Only LDAP version 3 is supported.

2.1   LDAP Transport Layer Security

For LDAP over Transport Layer Security (TLS), the ME uses action StartTLS according to RFC 4513.

The x.509 certificate that the LDAP server sends to the ME to set up TLS is constructed properly: The subjectAltName (or subject) field in the certificate contains the Uniform Resource Identifier (URI) which is configured in ME to reach the LDAP server. That is, the attribute ldapIpAddress in Ldap Managed Object.

3   LDAP Schemas

This section describes the LDAP schemas supported by the ME.

3.1   Standard Schema

The ME supports authentication and authorization based on the POSIX® account and the POSIX group schemas, according to RFC 2307.

Authentication is supported according to RFC 2307. Authorization requires that the following conventions are followed:

• The ME expects that each defined security role is equal to the Common Name of a POSIX group.
• Each Northbound Interface (NBI) user who is to act in the specified role must be included in the multi-valued attribute memberUid of the POSIX group.

3.2   Extended POSIX Account Schema

The ME supports a standard POSIX account schema extended with the following attributes:

• ericssonUserAuthenticationScope
• ericssonUserAuthorizationScope

The authentication scope extension enables the Security Administrator to define for which target type or types a user is to be authenticated. The authentication scope is used by the ME, as described in Section 5.1 LDAP Authentication Behavior. For more information on target type, refer to Security Management.

The authorization scope enables the security manager to specify the following:

• The role or roles the user has in the system, which the user has logged on to, when no "target type" prefix is configured.
• The role or roles the user has in the system, which the user has logged on to, when the "target type" prefix is configured. In this case, the value of the authorization scope must have the format <target_type>:<role>, where colon (:) is a delimiter.
• The alias role or roles the user has in the system, which the user has logged on to. There is no syntactic difference between a role and an alias role. If an alias role is defined, the schema must also include the role aliases schema, see Section 3.3 Ericsson Role Aliases Schema.

The authorization scope is used by the ME as described in Section 5.2 LDAP Authorization Behavior.

3.3   Ericsson Role Aliases Schema

The ME supports LDAP class ericssonRoleAlias, including a multi-value role attribute enabling the resolution of an alias role into a real role. This resolution is meaningful to the system to which the user has logged on.

The ME expects that each real role is equal to an ericssonUserAuthorizationScope (see Section 3.2 Extended POSIX Account Schema) in the multi-value role attribute, with the restriction that it cannot contain a nested alias role.

An example of an Ericsson role alias with example roles in LDAP Data Interchange Format (LDIF) is shown in Example 1. For a definition of the objectclass of ericssonRoleAlias, see Section 6 LDAP Object Classes and Attribute Types.

dn: role=sysadmin, dc=cominf,dc=eei,dc=ericsson,dc=se
objectClass: ericssonRoleAlias
ericssonUserAuthorizationScope: cscfsysadministrator
ericssonUserAuthorizationScope: mtassysadm
ericssonUserAuthorizationScope: ecimtopadmin
ericssonUserAuthorizationScope: ecimfmadmin
ericssonUserAuthorizationScope: ecimsnmpadmin
ericssonUserAuthorizationScope: ecimsecmreadonly
ericssonUserAuthorizationScope: sbg:readonly

4   LDAP Account Management

This section describes the LDAP user account attributes supported by the ME and required in the LDAP server.

4.1   Extended POSIX Account Management

The Ericsson extended POSIX account has mandatory and optional attributes. The attributes described in Table 1 must be configured when defining LDAP user accounts.

The ME does not use the gidNumber information of the POSIX accounts when roles are determined for the user. However, it is recommended that the LDAP accounts and groups are assigned in way to avoid collision with local groups. To leave space for system groups, the POSIX accounts and groups in LDAP are to use gidNumber greater than, or equal to, 500.

For a description of the LDAP-specific syntax and matching rules of attribute attributetypes, see Section 6 LDAP Object Classes and Attribute Types.

The mandatory and optional Ericsson extended POSIX account attributes that are not mentioned here are not used by the ME.

Example of Ericsson Extended POSIX Account

Example 2 is based on RFC 2307 and RFC 2798 in LDIF according to RFC 2849.

For a description of the objectclasses of ericssonUserAuthentication and ericssonUserAuthorization, see Section 6 LDAP Object Classes and Attribute Types.

dn: uid=lars,ou=people,dc=alvsjo,dc=ims,dc=telco,dc=com
cn: Lars Magnus Ericsson
ericssonUserAuthenticationScope: alvsjo.ims.cscf
ericssonUserAuthenticationScope: cscf
ericssonUserAuthorizationScope: ims:monitor
ericssonUserAuthorizationScope: cscf:ator
ericssonUserAuthorizationScope: alvsjo.ims.cscf:sysadmin
gecos: Lars Magnus Ericsson
gidNumber: 1000
homeDirectory: /home/lars
loginShell: /bin/bash
objectClass: ericssonUserAuthentication
objectClass: ericssonUserAuthorization
objectClass: inetOrgPerson
objectClass: posixAccount
objectClass: shadowAccount
objectClass: top
shadowInactive: -1
shadowLastChange: 13159
shadowMax: 99999
shadowMin: 0
shadowWarning: 7
sn: Ericsson
uid: lars
uidNumber: 1000
userPassword:: e1NTSEF9ck9ZbEJIRXNaek9Mbm1ybmRFNVlncUVVSll5TURKTzQ=

5   LDAP Lookup Behavior

This section describes the ME LDAP lookup behavior.

5.1   LDAP Authentication Behavior

If target types are specified when authentication and Target Based Access Control (TBAC) are enabled, the ME uses ericssonUserAuthenticationScope in extended POSIX accounts to filter out if a user can be authenticated on the node.

For example, ericssonUserAuthenticationScope: ims.South in the extended POSIX account of the user enables the ME to authenticate the user if ims.South matches a configured target type.

In addition to authentication of users with matching target type, also explicit wildcard, the asterisk character (*), in ericssonUserAuthenticationScope is accepted. Explicit wildcard is also accepted even if no target type is configured. If TBAC is disabled, the ME allows access to all users having a valid password.

5.2   LDAP Authorization Behavior

The ME based on configuration can use the following three profile filters when an LDAP search for authorization is performed:

• POSIX_GROUPS
• ERICSSON_FILTER
• FLEXIBLE

For more information on profile filters, refer to Managed Object Model (MOM).

5.2.1   POSIX_GROUPS Profile Filter

For the POSIX_GROUPS profile filter, the ME retrieves all instances of posixGroup in which the current NBI user is a member.

For a specification of the convention with which the POSIX groups are looked up, see Section 3.1 Standard Schema.

5.2.2   ERICSSON_FILTER Profile Filter

For the ERICSSON_FILTER profile filter, target types configured for the ME are used when performing the LDAP search. The ME uses ericssonUserAuthorizationScope and ericssonUserAuthenticationScope from the extended POSIX account, see Section 3.2 Extended POSIX Account Schema.

The ME follows the following steps:

1. If target types are configured and TBAC is enabled:
   1. The ME filters the target types for the user from attribute ericssonUserAuthorizationScope of the extended POSIX account and takes an intersection with the local node types.
   2. The ME takes the resulting set of target types and filters the roles from attribute ericssonUserAuthorizationScope of the extended POSIX account that have a prefix matching a target type or explicit wildcard.

      Also, if attribute version in Managed Object EricssonFilter is set to 1, the roles without any target type qualifier are also filtered. If the attribute is set to 2, the roles with empty target type are not filtered. As shown in Example 3, if ims.South is a configured target type, the ME filters roles as follows:

      • Administrator, Supervisor, and operator for the user if version is 1.
      • Administrator and Supervisor for the user if version is 2.

      All other roles in the account are ignored.

2. If a role alias base Distinguished Name (DN) is configured, the ME tries to resolve the list of roles gathered in the first step as alias roles. If the ME cannot resolve a role as an alias role, it uses it as it was a resolved role. An alias role is to be specified as described in Section 3.3 Ericsson Role Aliases Schema.
3. The ME repeats Step 1 to filter the roles based on target type qualifiers for role alias objects.

ericssonUserAuthenticationScope: ims.South
ericssonUserAuthorizationScope: ims.South:Administrator
ericssonUserAuthorizationScope: ims.North:SecurityAdministrator
ericssonUserAuthorizationScope: *:Supervisor
ericssonUserAuthorizationScope: Operator

5.2.3   FLEXIBLE Profile Filter

For the FLEXIBLE profile filter, the ME performs an LDAP search as configured.

5.3   LDAP Referral Chase

The ME supports client referral chasing for both authentication and authorization. This applies only if the referral URL refers to the same LDAP server instance while authenticating. This means that if the referral returns the address of a different host, authentication fails.

Client referral chasing can be configured from the NBI by setting attribute useReferrals in Managed Object Ldap. The attribute can have the following values:

• true – Referral chase is enabled.
• false – Referral chase is disabled, that is, the LDAP client ignores the URL returned by the referral.

  Note:  

  The default value is false.

  
  

6   LDAP Object Classes and Attribute Types

This section describes the structure, syntax, and matching rules of LDAP objectclasses and attributetypes supported by the ME and required in the LDAP server. This is according to RFC 4517.

The Object Identifiers (OIDs) are registered in the Ericsson branch of the OID structure.

Note:  

In Example 4, ensure that the syntax exactly includes the tab spaces when it is copied to the LDAP schema file.

attributetype ( 1.3.6.1.4.1.193.207.372
        NAME 'ericssonUserAuthenticationScope'
        DESC 'Ericsson User Authentication Scope'
        EQUALITY caseIgnoreIA5Match
        SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )

## Auxiliary Object Class for Ericsson User authentication attributes.
objectclass ( 1.3.6.1.4.1.193.207.374
        NAME 'ericssonUserAuthentication'
        SUP top AUXILIARY
        MAY ( ericssonUserAuthenticationScope ))

attributetype ( 1.3.6.1.4.1.193.207.373
        NAME 'ericssonUserAuthorizationScope'
        DESC 'Ericsson User Authorization Scope'
        EQUALITY caseIgnoreIA5Match
        SUBSTR caseIgnoreIA5SubstringsMatch
        SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )

## Auxiliary Object Class for Ericsson User authorization attributes.
objectclass ( 1.3.6.1.4.1.193.207.376
        NAME 'ericssonUserAuthorization'
        SUP top AUXILIARY
        MAY ( ericssonUserAuthorizationScope ))

attributetype ( 1.3.6.1.4.1.193.207.371
        NAME 'role'
        DESC 'Ericsson Role'
        EQUALITY caseIgnoreIA5Match
        SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )

## Auxiliary Object Class for Ericsson Role Aliases
objectclasses: ( 1.3.6.1.4.1.193.207.375
        NAME 'ericssonRoleAlias'
        SUP top STRUCTURAL
        MAY ( role $ ericssonUserAuthorizationScope))