Contents

1   Introduction

This document describes how to change an enrollment server.

1.1   Prerequisites

This section describes the prerequisites, which must be fulfilled before using the procedure.

1.1.1   Conditions

The following conditions must apply:

• The user has the System Security Administrator role.
• The enrollment server is known.
• An Ericsson Command-Line Interface (ECLI) session in Exec mode is in progress.

2   Procedure

To change an enrollment server:

1. Navigate to the CertM Managed Object (MO), for example:

   >dn ManagedElement=NODE06ST,SystemFunctions=1,SecM=1,CertM=1

2. Enter Config mode:

   (CertM=1)>configure

3. View the EnrollmentServerGroup MOs:

   (config-CertM=1)>show -v -r

   The following is an example output:

   CertM=1 [...] EnrollmentServerGroup=1 enrollmentServerGroupId="1" userLabel=[] <empty> EnrollmentServer=1 [...]

4. Select the EnrollmentServer MO to modify, for example:

   (config-CertM=1)>EnrollmentServerGroup=1,EnrollmentServer=1

5. Modify the EnrollmentServer MO attributes, for example:
   • (config-EnrollmentServer=1)>uri=http://192.0.2.10:8080
   • (config-EnrollmentServer=1)>userLabel=admin@organization.com
6. Commit the settings:

   (config-EnrollmentServer=1)>commit

7. Verify the settings:

   (EnrollmentServer=1)>show -v

   The following is an example output:

   EnrollmentServer=1 [...] enrollmentServerId="1" protocol=CMP uri="http://192.0.2.10:8080" userLabel=[] <empty>